magpul is going to make so much money with the wire control kit. Instant purchase, no brainer, everyone needs one, everyone wants one.

@blueairforcevet3216

Жыл бұрын

Honestly, tho. I’ve always steered away from wired switches. Now I’m reconsidering.

@joehoffy

Жыл бұрын

They certainly aren’t the first, and they don’t look like the lowest profile option or the most versatile routing option either.

@SoccerVJ2011

Жыл бұрын

The BAD lever is still their best product

@Felix0770

Жыл бұрын

I mean my range days consist of replacing zipties as they melt off. This solution offers a lot less smoke and less time remembering where I put my spare zipties.

@tomjjackson21

Жыл бұрын

It's not as if there isn't 30 other identical items on the market, by dozens of manufacturers that serve the exact same purpose or anything. Is this just fawning for acknowledgment in the chat by the content creator, or have you not purchased firearm accessories this decade? Magpul is only relevant because of their mags, and the fact that most manufacturers release completed firearms using the furniture. This is more fluff that none of us really desire or need.

Not going to lie, I’m kinda impressed by these new products announced over the past few days

@chrisdonahue524

Жыл бұрын

Same, Magpul has their thinking caps on.

@tattooedredheadx

Жыл бұрын

Seriously, the R&D guys deserve raises.

Your marketing team is unreal. One of the few companies that's actually in touch with what people need.

I love my K2+ grips and CTR and STR stocks. Magpul makes great kit.

"Adjust and customize set selectors without screws or tools" Proceeds to pull out a punch to tap out the set pin. - Magpul

@Berserkable

Жыл бұрын

I could be wrong but a tip of a 556 round May do the same thing. I think it may be spring loaded and not an actual pin that is removed.

@sluttybutt

Жыл бұрын

@@Berserkable ok. Now install it without any tools

@doriandesantiago1260

Жыл бұрын

@@sluttybutt they said install it without tools not remove it without tools LMFAO

@innawoodsman

Жыл бұрын

​@@Berserkable I wouldn't tap on the back of a 5.56 round with a hammer though. Just a thought

@ohhhLuna

Жыл бұрын

@@innawoodsman Eh, it'll be fine. What's the worst that could happen? Seriously though, I think in most cases, unless you hit it with a waffle-face hammer, it wouldn't go off. As I understand it, the primer requires a piercing force, rather than a blunt blow to the rear.

The barricade stop is brilliant. The selector too.

@FORGOTENcreatr1

Жыл бұрын

I feel like it doesn't really do anything a vertical grip wouldn't do...

@cleetismcdougall5425

Жыл бұрын

@@FORGOTENcreatr1 regular grips will slide around more. This way looks like it will grip surfaces better. Like different feet for bipods.

Barricade stop doubles as a close quarters bludgeon.

The wire control kit will be a day 1 buy for me...lets just hope its not a 2025 release.

@FishFind3000

Жыл бұрын

That’s just how it is. But don’t worry you can buy some new socks or underwear and a new daka instead of the products you want.

@jamesR1990

Жыл бұрын

I want to see them in person. Zip ties haven't failed me yet 😂

@shooteveryday1841

Жыл бұрын

Strike industries sells them right now

@Mike_Jones68

Жыл бұрын

@@shooteveryday1841 yeah but it looks iffy. I mean its a massively overpriced rubber band that has a cable notch that probably will fail soon after you use it. Id have to see it on someone else's rifle first. Def not buying the Strike Ind crap to experiment with.

@KnightRyder1990

Жыл бұрын

Mike Jones, I just got some bang bands the other day and the work. Not perfect but they are very strong and make a nice securement point for a sling as well

Love the barricade stop, a company in tune with what people want

That wire management system is exactly what I need! Can’t wait till it’s released

@tenmilez

Жыл бұрын

zipties

@agentoranj5858

Жыл бұрын

Imagine buying a $20 dollar piece of plastic to solve a problem that you could have solved with 99¢ roll of tape.

@spartanpatriot3163

Жыл бұрын

@@agentoranj5858 or a 5 cent zip tie

@agentoranj5858

Жыл бұрын

@@spartanpatriot3163 Where do you buy individual zip ties?

@WinSomeLoseNone0

Жыл бұрын

Check our arson Machine mlok wire guides, they are smaller and less expensive and machined aluminum!!

I have a couple of the old school magpul\ noveske short throw safety levers, and I'll definitely be buying the new version. Also nice to hear about something new other than another daka pouch.

Hope this will all be offered in OD Green as well!

That stop is pretty cool. You could mount it 180⁰ opposite of your 45⁰ offset (irons or reddot) this would come in handy for zeroing and making precise shots when running an LPVO. Good stuff. Now they just need to come out with an Mlok Bayonetta lug/attachment and ill be happy.

@pezimore

Жыл бұрын

what company will make a bayonet to mount on it. standard akm bayonettes maybe? or perharps mosin bayonettes or something goofy like that

@vegeta420z6

Жыл бұрын

@@pezimore M9 Bayonet, like they put on the mossberg 590's, I've also seen them on M16 A1 and A2 variants they attach via a barrel clamp system. I've never seen one that attaches to a free floated handguard, but assuming you're handguard is very rigid and securely mounted, I don't see why someone couldn't make an Mlok or Picatinny mount for one.

@vegeta420z6

Жыл бұрын

@@pezimore as it turns out Geissele Actually makes both an Mlok and a picatiny rail mount for an M9 Bayonet, and Sig makes a pic rail version. When I replied above I realized if never actually looked for one, so I did some searching and yeah their still being made and for sale. Looks like my AR just found its next accessory.

@pezimore

Жыл бұрын

@@vegeta420z6 Badass. You think my cz scorpions plastic body would hold up lmao

@vegeta420z6

Жыл бұрын

@@pezimore HB industries makes aftermarket handguards out of Machined 6061 Aluminum, and they also sell a more stout barrel nut to make it more rigid, I've never handled a scorpion, so I couldn't say for sure but id think that should hold an m9 Bayonet (depending on exact model is going to be around 14oz)

I don’t even own an AR yet but, Magpul is becoming one of my favorites for accessories for my future AR!

@sagar42095

Жыл бұрын

Go get you one dawg b4 it gets hard to buy, no matter the brand or price you’ll love your first one. I think you’ll make a great rifle!

The barricade stop looks really awesome. I might have to grab one

Impressed with every magpul product I've ever bought for any platform

Baricade stop, mandatory on every carbine from now on. Perfect idea.

Wire control kit: *exists* Zip ties: “am I a joke to you?” Jk it looks like a nice option for those wanting a more elegant solution.

The modular Fire selector switch is ideal 👌🏻

That wire stop is fire… good stuff.

Definitely getting these....and a bipod

I want my barrier stop to be all metal... same with the selector lever... Also I prefer a lever with fewer parts. The Wire management product looks good.

I like that modular fire selector, I'm tired of so-called "ambi" selectors that are stubby on the right side.

@d3ltaohniner261

Жыл бұрын

Those of us with big hands need the stubby ones for an ambi option that doesn't get blocked when using it right handed. A standard length, even with a MOE grip, hits the 1st knuckle of my trigger finger and stops cold.

Love the wire route and new button set up

Wire control kit is great!

Magpul is doing it again with innovating new gear. Those wire control clips are going to be 💰.

@FoMoCo_123

Жыл бұрын

Manta Defense & Modlite already make clips like that

Been looking for a new selector, preferably a 60/90 one, cant wait for this to drop now !

Can we attach a barrier atop to either side of the Handguard so the front of our gun looks like a hammerhead shark?

@operatpoor9445

Жыл бұрын

He’s asking the important questions

@jorgergonzalezvisualartist8925

Жыл бұрын

@@operatpoor9445 😂

@jorgergonzalezvisualartist8925

Жыл бұрын

Then you put it upside down so the stock is the tail 😂🦈🦈🦈🦈

I don’t need any of these but appreciate the effort. My light is a new design that eliminates the cord and pad that makes everything so awkward

Magpul should team up with a paint manufacturer and put out a Magpul FDE spray paint.

@feraligatorade99

Жыл бұрын

Or Magpul FDE cerakote color

@ThoraniosX

Жыл бұрын

@@feraligatorade99 you’re fucking with us, right?

@spartanpatriot3163

Жыл бұрын

Brownells alumahide is almost an exact match, like 99% match.

@shooteveryday1841

Жыл бұрын

Duracoat sells magpul FDE paint.

@spartanpatriot3163

Жыл бұрын

@@shooteveryday1841 the Brownnells is a closer match.

The stop and wire kit look like must have items.

"Smaller packages, bigger unfair advantage" was my slogan in college.

great quality-of-life improvement products!

I'd really like to see some X95 parts. There's not a lot on the market for the X95, so a Magpul K2 cutlass would sell pretty well.

You know, a roll punch does count as a tool.

Make OD Green pmags!!!!

My brother and I are always faitful to Magpul's upgrades.

"Without screws or tools" then uses a punch at 0:19 ................

@feraligatorade99

Жыл бұрын

thought the exact same thing

@Sapper_Rage

Жыл бұрын

Wonder if you could use just the tip of a 5.56 round.

That barricade is pretty nifty. Something I never really thought about

The wire routing will be a nice addition.

I’d love to see a Magpul charging handle for the AR. And maybe a cover for the AK charging handle similar to the zenit co type ones

I'm really interested in the barricade stop seems fun

Yeah, I'm ready and willing to throw my money at this.

That slogan is great. Smaller packages bigger unfair advantage. Well put!

I need all of these

Awesome, happy to see some new, very useful stuff

honestly pretty impressed

I want those barricade stops and wire control kits.

Magpul, you guys really need to bring back foliage green.

Besides the cable management it's hard to add something new when you already have a Daniel Defense 🙃

Cool! More stuff Magpul is announcing that we we won’t have for 2-3 years.

Like the wire management kit the rest is yeah.

I'm liking the upgrades for my Daniel Defense.

Damn you magpul ✊️! I would have bought these last year.

Magpul continues to innovate! The wire control kit is a must have for me

Strike industries makes cable management attachments for M-lok. A little chonkier but do the same.

@d3ltaohniner261

Жыл бұрын

Strike Industries is imported trash. Magpul is domestically manufactured quality product that's made affordable to the average consumer.

@bulltron8926

Жыл бұрын

@@d3ltaohniner261 not everything, but yes most of their stuff is imported. Just stating the fact that the product is not unique.

Magpul has become the meta

THANK YOU MAGPUL!!! Once again, MAGPUL delivers the goods. 😀😃👍👍👍👍

Man, I just zip tie my pressure pad cable around the light instead of to the handguard. I don't see anyone else doing that but my wires are completely out of the way. I like the safety selector, as long as I can make it non ambi, ambi safety selector sucks.

I think I'd prefer the handstop had a rubber tip 🪠 instead of the metal spikes ⛏. If those spikes land on a metal or cement surface, I don't think they would be very secure or very quiet.

@americanball_2841

Жыл бұрын

If they were rubber theyd be destroyed very quickly.

@greekfire1875

Жыл бұрын

@@americanball_2841 The tips could be easily replaceable.

@chrise2621

Жыл бұрын

Just the tip

Nice job, Magpul!

Excited for the safety

I'm definitely buying

All my life all I’ve ever wanted is a field trip expedient shooting rest 😢

Finally someone agrees that smaller packages aren't necessarily a bad thing! Thanks Magpul!

illinois is gonna be prime for new upgrades, the bare barrel that "burns your hand" the non detachable mag thats fed with stripper clips of only 10 rounds of 458 socom but holds 25 rounds of 556, the screw in and out stock, the carry handle grip with thumb trigger and lest we not forget the clamp on blast forwarder.

@anon556

Жыл бұрын

Free men do not seek permission or follow laws repugnant to the constitution. Criminals could care less also

@the_chomper

Жыл бұрын

@@anon556 how many machine guns you got? thats what i thought

@the_chomper

Жыл бұрын

@Christian Constitutionalist moving is complying. i dont live in illinois, im a cheesehead

@anon556

Жыл бұрын

@@the_chomper 🤣🤣🤣🤣🤣 you're a clown. Are you 12?

@the_chomper

Жыл бұрын

@Christian Constitutionalist gotcha my bad

Goddamn these look great! Magpul once again leads the way!

I love Magpul

That’s cool but I want a fold out barrier stop now

Make the ACR type rifle!!

Crypto-flexing with the SR-15

Still waiting on magpul P320 mags….

The best company in the gun industry I don’t care what anyone says

I wish that the barricade stop was a little smaller more streamlined but I like it

I want that knights!!!

Just waiting on the savage 110 long action stock

Only one we all gana use is the cable manager

That is the one thing HK did right over the AR

What a genius company

CTR 2.0 with MOE SL friction lock and a slimmer K2 without the beefy beavertail. Also Colt SMG Pmags 9mil in 10 and 30+ rounds. That would be nice...

Damn and i was just looking at a new selector

I say this with tongue in cheek as a sort of friendly 'tease' to Magpul, but i hope 'coming soon' isnt quite as long as the Mbus3's were 'coming soon' 😅🥰

Love it, great products !!

I’m still waiting for my savage model 10 chassis

People will love police jamming those spikes into their car thanks magpul😂

I love magul

Going to mix this with some zenitco

Cool. I hope it will be legal in our state.

Please make a pistol grip and rail for the X95 Tavor. We need a K2+ X95 grip.

GET SOME!

Magpul is wearing the pants this year.

Magpul: Wire Control Kit Me: 😳 Also Me: 💳💵💰

Nothing I need, everything I want

Yooooo its the voice from The Infographics Show KZread channel.

It’s the little things.

AKs getting any love this year?

i hope it has a picatiny mount for the barricade

WOW! Just WOW!

Dat Knights doe

nice need some wire management for sure. Now lets gets some Mp5 Pmags lol