Magnavox MDR865H/F7 DVD/HDD with a possible bad Hard Drive/Bad Caps in the DVD Recorder Part 1 of ??
Ғылым және технология
Taking a look at a Magnavox MDR865 Hard Disc Drive / DVD Recorder that wont play from the Hard Disc. I plan on trying another 250GB Drive I have recently formatted, that will be part 2
Пікірлер: 20
For 100uF and less, would it be easier to replace SMT electrolytic capacitors with ceramic capacitors?
Ive got a sharp vc-a503 the slip clutch wont engage the drive gears any suggestions?
most there is a special Firmware on the HDD´s for Recorders, not only a special File Format
There is a software called Diskgenious that is very good and free. It would be able to show you if the computer detects the drive or not, even if it is defective and the type of formatting it has now. It may be formatted for linux, for example, and your Windows computer may not be able to recognize it natively (but that software can).
I have never had any success employing the freeze technique on suspect hard drives.
Windows will almost certainly not show the drive in explorer even if it’s working because it’s likely formatted with something like EXT3 (Linux). You’d need to look in disk management (right click start). The new drive probably needs to be blank for the recorder to recognise it as a usable drive. You can wipe the drive in windows using diskpart. Google how to use the diskpart clean command but BE CAREFUL because if you fluff it up you can erase your system drive by accident.
Hi probably is just hdd remove the board and look in to tvs diodes of the drive. To format drive try secrete menu skip 079 there you can format the hdd
@norcal715
6 күн бұрын
skip 079 has no effect on this unit. I must have tried 100 times
@stevedebeukelaer1424
6 күн бұрын
@@norcal715 piety and flash the firmware ? Did you try that?
@stevedebeukelaer1424
6 күн бұрын
@@norcal715 hi try next skip 079 that will be working i did what research. Let me know please
I bought this same unit form the thiftstore for$8
@leonjohnsonjr3331
7 күн бұрын
Thats not the harddrive that goes in there it should be 3.5 harddrive
@norcal715
6 күн бұрын
It clearly states one the interconnect board 2.5 inch, so..... no, the drive is the original factory size
@leonjohnsonjr3331
6 күн бұрын
@@norcal715 o ok that's great
Try formatting the Hard drive in Fat32
@norcal715
6 күн бұрын
Only NTFS or exFat was an option. Part 2 is in the works now with a different 250Gb drive
لماذ لاتفرغ المكثفات قبل فحصها .وقبل سنوات نزلت صين جهاز فحص مكثفات صغير وفعال وممتاز افضل وارخص مما عندك .وتحية للك من الاردن
@norcal715
6 күн бұрын
سيتم تفريغ (إفراغ) معظمها بواسطة الدوائر التي تقوم بتحميلها. الشيء الوحيد الذي يهمني هو مكثفات الجهد العالي الجانبية الأساسية.
@stingerassil5989
5 күн бұрын
@@norcal715 احسنت اخي