"How much oil pressure does it show?" That was the question asked me the first time I crawled out of my Cat loader and was running a Terex with a 6v53. I was complaining to the boss that it had no guts going up the pile. I said "about 30 psi" he said "wind her up to 60!" I did and after the deafining WHOOOO of that 2 lobed blower started sounding like a steam whistle we were MOVING! I have worked on hundreds of Diesels In construction, heavy trucks and on my farm. Detroit 2 cycles are my hands down favorites. I own a few, including a 6v53 NA. with the proper cam timing governor adjustments and injectors they will make big power AND torque! On road Detroits were severely nutted for emissions (ESPECIALLY in California!) even early on. Set up right the NA motors at least will pull down so low you can count the cylinders and not stall. I knew an old guy that worked for Detroit for years. He said "either you love them or you hate them. When a guy would come in and say he hated them, I would say RTFM, (read the "furnished" manual!)" I would see so many who didn't and thats usually where the no torque, leaks oil, (ALWAYS use a single weight oil approved for Detroit even if you have to order it. I dont care who says modern multigrade will work fine.) blackstacks, BS that was supposed to be "common knowledge " came from. Of course, the early 92 series had issues and the old crown style 600psi injectors were junk. He had a little book from Detroit he showed me that was full of factory dyno tests of every possible Detroit Diesel combination with every possible injector that would physically fit the motor and any possible cam timing and RPMs from the '40s to the '80s they were trying to push them to the limits to see what broke first for the Military and emergency fire pumps etc. to see what broke first then fixed it. An aluminum 6v53 can make close to 600hp in an emergency and 450 reliably from 318ci! I asked him to order me one of those manuals. He said "you can't buy them, and I'm not even supposed to have it!" If I needed to make one scream I called him and the little book came out! some foreign countries still make them. At least I saw an article around 2018 where 8v92 aluminum electronic injection motors at 850hp were being built to be used to repower some armor. Nothing else would do that as light and reliable. A Cummins engineer said once "no other engine will get you back home with more wrong with it than a Detroit!"

I JUST LOVE YOUR TOY COLLECTION, BEST OF BOTH WORLDS. A "B"MODEL MACK & A 2 CYCLE DETROIT DIESEL ENGINE!!!🤠🤠🤠

Never seen a Mack B with a Detroit diesel, but wonder if it was ordered that way???? Neat old truck 🚚. 😊😊😊😊

I'd love to have that so I could idle it in my driveway 24/7 to get back at my neighbor for always idling his straight piped EcoDiesel.

Detroit's make plenty of noise with mufflers; they are downright obnoxious without!!

First time I have seen a b model with a Detroit

I'd love to have that sound as a ring tone for my phone

There is a factory turbo for those and the exhaust goes to a 4" single . Swap a two speed two ton rear axel and it'll gain more mph and a creeper low gear. With turbo you can DELETE the muffler too .

That lil Mack sounds g👀d for being a V6 Detroit diesel. 💨

@SnickersG-fu2pw

4 ай бұрын

In my opinion the classic and old antique rigs had the style, design, and mechanical aspect. Just K👀L... 👍🏻

@deborahchesser7375

4 ай бұрын

@@SnickersG-fu2pwya can’t get much more classic than a B model Mack they are gorgeous

Badass

O-H-I-O Porter greetings🇺🇸 It’s nice to see & hear this truck roll! It seemed to shift gears nicely & I was a bit shocked by that. Has a pretty slow end to it when backing up & that can be handy! Love the truck! Hope you make it even better! What are your plans for it now? Great stuff! 🥰🤩✌️

Would make a nice single axle dump rig. Needs Jake though. Thanks!

That thing sounds all kinds of pissed off. 😂😂😂. But would love to take it for a spin. lol.

Nice

👍👍

Lotta noise!

Cómo se llama la música con la que empieza el video? Gracias Hermoso camión Saludos desde argentina🇦🇷

Rear axle has cones, but not big enough to be a 29,000. What year is that thing? I thought they stopped making that 22,500 lbs axle with the cones (True Full Floating Axles) in the early 50's

I wonder how a 471 would fit

I doubt that's factory built with that drive train.

@bertgrau3934

4 ай бұрын

It could be all original. Alison specifically built automatic transmissions for big trucks since the 1940s I believe. Detroit started building the 2 stroke in 1938, and the automatic in 1948. So it's very possible that is an original.

@crushingvanessa3277

4 ай бұрын

@@bertgrau3934Might be. I have a few books on B-models and they don't mention it, but not saying it couldn't have been done. I know Fords had a Detroit option.

@bertgrau3934

4 ай бұрын

@@crushingvanessa3277 At the time,they were called GM Diesels, any truck, bus, boat, or use for stationary use could use them, or any other engine such as Cummins or Cat. I have seen a few early 50s Peterbuilt with the Cat engine as well. I remember reading an article where Ford had a contract with Cat in 1967.

What kind of transmission is that? I'm looking for an Allison/Chevrolet Powermatic from 57.

@bertgrau3934

4 ай бұрын

I'm not certain, I think it's an Alison. They made automatic transmissions for big trucks for a lot of years starting in the 1950s. The military tried some in 2 and a half trucks.

@joelcheek3494

4 ай бұрын

@bertgrau3934 thank you. The Powermatuc has an odd retarder pedal to the left of the accelerator pedal that looked like another accelerator pedal. The retarder redirected the trans fluid so that the trans slowed the vehicle similar to engine braking.

@bertgrau3934

4 ай бұрын

@@joelcheek3494 I didn't know that. Thank you. I know Cat had something like that as well, it worked in the engine and would slow the engine.

I don't know much about those old trucks, but that one sounds like it's over revving big time.

@anonymousinc.7318

4 ай бұрын

Nah... Detroit 2 strokes can take 3000 rpm... sounds like 6000 though.

@bertgrau3934

4 ай бұрын

The 6V53 came from the factory set up to run 2800 RPM could safely turn them up to 3200. According to a GMC dealer.

@anonymousinc.7318

4 ай бұрын

To further clarify, the old school truckers said the best way to drive a GM 2-stroke was to slam your hand in the door so you would be good and pissed off. These 2 strokes aren't your typical diesel, they like to be run hard.

@bertgrau3934

4 ай бұрын

@@anonymousinc.7318 I've driven a bunch of trucks with 2 stroke Detroits, they all were slow, except for the 8V92 , that was pretty good. The 6V53, 6-71, 8-71 were slow, and when you hit a hill, it was like you couldn't down shift fast enough.

@anonymousinc.7318

4 ай бұрын

@bertgrau3934 Yeah, they didn't have much on the hills, but you couldn't catch them on flat ground if they were run hard.

Would you sell it?

I think it would sound better with that muffler reinstalled.

Automatic? Why?