M113 engine rebuild - Part 12 - timing chain + oil pump + timingcase install
Автокөліктер мен көлік құралдары
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Patreon: / jmspeeddshop
➤Website: jmspeedshop.com
➤instagram: / johanmuter
M113 Timingchain Oil Pump and Timingcase install
This is will make the engine look more coming together. This is a pretty important part of the installation. because the chain is what makes or breaks the engine if it is no correct.
So at first. the sprockets are mounted. On the crank it is slide on. The center sprocket is with a left threaded bolt. This is the only bolt in the engine that is having this left thread. so keep that in mind. After this the quide's are installed. And the chain can be put in place. Take a good look at the copper coloured markings. The need to on all the sprockets on the right position. Also install the cam gears. And lock them with ty-raps so the will not drop.
The timing case has a lot of bolts with different lenghts. There is a spec sheet in the manuals where the will go. All the bolts that will hold the cover to the block are M8 and need to put on 20NM. The extra bolts for the waterpump are M6 and need to be put on 10NM
It is also very imported to follow the sealer instructions for the Timing cover. because there should not be put sealer on all the channels. The oil channels should not be sealed. This to prevent getting gasket material in the pressure channels.
if there are any questions just ask
JMSpeedshop.com
Music : Rewind By Markvard
Пікірлер: 26
I really want to thank you for making such a detailed video it is the only one out there to watch and you did a very good job explaining everything although I only have a a M112 this is still been extremely helpful with the work that I’m doing
@JMSpeedshop
2 ай бұрын
Thanks 👍
Always impressed by someone who's not afraid to rebuild an engine. Also that is a great size garage, and with a built in log burner! Jealous 😂
@JMSpeedshop
Жыл бұрын
Thanks 😎
Well done man. Cheers
@JMSpeedshop
Жыл бұрын
Thanks
I like that you pulled up the WIS docs! A lot of people don't have access to those so it helps them a lot. Cheers brother keep it up! Luckily I have the M113 AMG so I already have forged pistons if I wanted to add boost. How much PSI you going to be pushing on this 5.0 motor you think?
@JMSpeedshop
Жыл бұрын
On Regular petrol around 0.6 bar and on e85 around 1.3 that is the guess .
@norlyn2
Жыл бұрын
Pretty sure the AMG pistons are not forged, they are beefier yes, but not forged.
Thanks great information i am in American Samoa working on 2001 ml320
@JMSpeedshop
7 ай бұрын
Nice 👍
I'm assembling an M112 engine here in Brazil, would you have this sealant and torque diagram that you show in the video so I can print and assemble it correctly? Thank you very much!
@JMSpeedshop
6 ай бұрын
See me a mail through. jmspeedshop.com
How can i pull up WIS information for me repair head gasket leaking coolant 28:37
Do you have the part # for the famous o rings that go on the timing cover?
do you have part numbers for the timing guide wheel/sprocket
Hiya. Please help. I have the same engine, when I changed the oil, I tightened the oil filter base screw wrong and there is a broken thread. Can I replace the timing belt without removing the heads? Do I have to take the head off though? Please reply. Regards
hey there again just received timing chain guides and tensioner but my chain doesnt have the copper tabs or and different discolor from the rest of the chain nor any marks would you know how to proceed without marks or different color tabs
@JMSpeedshop
10 ай бұрын
If you have the markings on the sprockets alle in the right place the marking on the chain is not really needed . It is an extra indication
hi in the process of doing the same rebuild, was wondering what the o-rings in the timing case are called and where you ordered them from, a part number if possible would help thanks in advance. great job to by the way has been very helpful!
@JMSpeedshop
10 ай бұрын
Just from the Mercedes dealer. Dont have the number . Have to look.it up also
C 340
Where did you get the cylinder head studs from
@JMSpeedshop
9 ай бұрын
I had them custom made local. But delivery time . Is very hard to say for small order
@JMSpeedshop
9 ай бұрын
Have a look also on jmspeedshop.com
Morning NYS Gop