How to Lubing and Adjusting throttle cables on my kawasaki z900 www.revzilla.com/product/moti... www.revzilla.com/product/pj1-...
Жүктеу.....
Пікірлер: 52
@calixtaguerrero74227 күн бұрын
this is the exact video i was looking for! i’m a new rider and im dealing with this issue. i had looked at multiple other videos and none were as helpful as this. THANK YOU!
@nathanbrown-cwo4672 жыл бұрын
This video saved me after I took my throttle housing apart to upgrade my handle bars and was trying to figure out how to put it back together. Yep i'm a noob!
@SimpleSimon
2 жыл бұрын
Lol we all start somewhere thanks for watching.
@danielwoozy2 жыл бұрын
Great video. Very important for every rider out there, well explained. Thanks.
@blood-rhinothegamer237326 күн бұрын
The play in the throttle (in my 2001 GsxR case) need to be there because the cable take a little bit of tension when you turn the handle fully on right and loosing it in left so, there must be like 4 mm of play, but very well done video, clear to understand!
@nokuthulantamnani5349 Жыл бұрын
Just did mine now and it's 100% working thank you for the video
@Minerva___4 жыл бұрын
Great video, clear instruction. Thanks, Simon!
@SimpleSimon
4 жыл бұрын
Very welcome
@denesealayon81822 жыл бұрын
Great Video man. Big help for a learning begginer rider like me. Thanks a lot, and ride well man. 🙏😌🤙
@SimpleSimon
2 жыл бұрын
Thanks for watching.
@atik.vashisht9 ай бұрын
Good stuff !! Thanks
@canerguener86643 жыл бұрын
Great.Will try it.Thanks.
@SimpleSimon
3 жыл бұрын
Thanks for watching
@rickwarner516 Жыл бұрын
Thank you
@IlIlIlllIlIlIllli2 жыл бұрын
Where is the end of the cable located at?
@josefrancis98735 жыл бұрын
Thanks a lot Simon
@buddahmayne92732 жыл бұрын
Good video
@SimpleSimon
2 жыл бұрын
Awesome, Thanks for watching.
@noname-wm2xb2 жыл бұрын
good video
@SimpleSimon
2 жыл бұрын
Thanks for watching
@stephansimon56485 жыл бұрын
After I heard “Stay tuned” I couldn’t click off the video.
@jhantushankar5 жыл бұрын
I intend to do all the maintenance jobs on my z900 myself, but i have no idea about the tools that would be required for the Job. I would be really grateful if you can make a video about the tools. needed.
@jhantushankar
4 жыл бұрын
@J G You forgot Dragon Balls.
@jhantushankar
4 жыл бұрын
@J G You forgot Dragon Balls.
@TheDR3AMpoet3 жыл бұрын
How often should you lubricator the throttle and clutch cables?
@SimpleSimon
3 жыл бұрын
at least once a year, if your bike sits in the rain or you ride in the rain you should do it more often. Thanks for watching.
@TheDR3AMpoet3 жыл бұрын
What cable grease do you use? Not the lube but the grease.
@SimpleSimon
3 жыл бұрын
I use Synthetic Bearing grease. Thanks for watching
@8OneOfTheNobodies85 жыл бұрын
How often do you recommend lubing your throttle and clutch cables ? ... lets say on a brand new bike .. each year .. two years ? ...
@SimpleSimon
5 жыл бұрын
The Z900 manual suggest at 1,000 miles to adjust and at 7,500 miles to adjust I would lube them also. Now if you do alot of rain riding or you store your bike outside I would lube at least once a year. Any time the throttle feels sticky or slow to return I would lube at that time also.
@8OneOfTheNobodies8
5 жыл бұрын
@@SimpleSimon Thanks for the answer :)
@MotoRenaissance2 жыл бұрын
TY!
@SimpleSimon
2 жыл бұрын
Thanks for watching.
@brianbay32295 күн бұрын
I'm not understanding the need for that little cable tool. Why not just use the straw to spray lube in the cable housing?
@8OneOfTheNobodies84 жыл бұрын
Could you use this "wd-40 specialist dry lubricant" .. just curious ..
@SimpleSimon
4 жыл бұрын
Not sure, I have never tested it. I always try and use lubes and fluids that are designed for that specific application. Thanks for watching
@mustbescud3 жыл бұрын
Hello, what type of lube did you use to apply on the ball/tip of cable? Just a general grease or a specific moto grease? Thank you?
@SimpleSimon
3 жыл бұрын
I used Synthetic bearing grease you could also use lithium grease or silicone grease. Thanks for watching don't forget to subscribe.
@mustbescud
3 жыл бұрын
@@SimpleSimon Thank you. I'll look into those. Realised i put a question mark on after thank you on the other comment lol. Cheers sir
@pokemon170073 жыл бұрын
Nice, thanks. Btw why are there 2 throttle cables there? (cwl)
@SimpleSimon
3 жыл бұрын
Hi Pokemon17007 great question, the second cable is the throttle return cable. It is a safety cable incase your throttle doesn't snap back you can force it closed. Thanks for watching.
@pokemon17007
3 жыл бұрын
@@SimpleSimon wow, I thought it would be something like that, very nice, thanks for your info. 👊
@amarildo988idrizai63 жыл бұрын
Hell i used wd40 before watching this vid.. will this have any bad effect later?
@SimpleSimon
3 жыл бұрын
No your should be fine unless you ride in lots of weather it could start rusting. Thanks for watching don't forget to subscribe.
@ethancknight2 жыл бұрын
I just cannot get this to work no matter what I do. I do not have nearly as much slack as you do. Everything is so tight that I can’t complete this and put the throttle back together
@SimpleSimon
2 жыл бұрын
Sorry it took so long to reply did you get it resolved?
@ethancknight
2 жыл бұрын
@@SimpleSimon No problem, I ended up leaving it with a shop. They replaced the cable with something different. works well now.
@Fordahord12 жыл бұрын
So only lube one cable??
@SimpleSimon
2 жыл бұрын
you should lube both cables if you can. Thanks for watching.
Пікірлер: 52
this is the exact video i was looking for! i’m a new rider and im dealing with this issue. i had looked at multiple other videos and none were as helpful as this. THANK YOU!
This video saved me after I took my throttle housing apart to upgrade my handle bars and was trying to figure out how to put it back together. Yep i'm a noob!
@SimpleSimon
2 жыл бұрын
Lol we all start somewhere thanks for watching.
Great video. Very important for every rider out there, well explained. Thanks.
The play in the throttle (in my 2001 GsxR case) need to be there because the cable take a little bit of tension when you turn the handle fully on right and loosing it in left so, there must be like 4 mm of play, but very well done video, clear to understand!
Just did mine now and it's 100% working thank you for the video
Great video, clear instruction. Thanks, Simon!
@SimpleSimon
4 жыл бұрын
Very welcome
Great Video man. Big help for a learning begginer rider like me. Thanks a lot, and ride well man. 🙏😌🤙
@SimpleSimon
2 жыл бұрын
Thanks for watching.
Good stuff !! Thanks
Great.Will try it.Thanks.
@SimpleSimon
3 жыл бұрын
Thanks for watching
Thank you
Where is the end of the cable located at?
Thanks a lot Simon
Good video
@SimpleSimon
2 жыл бұрын
Awesome, Thanks for watching.
good video
@SimpleSimon
2 жыл бұрын
Thanks for watching
After I heard “Stay tuned” I couldn’t click off the video.
I intend to do all the maintenance jobs on my z900 myself, but i have no idea about the tools that would be required for the Job. I would be really grateful if you can make a video about the tools. needed.
@jhantushankar
4 жыл бұрын
@J G You forgot Dragon Balls.
@jhantushankar
4 жыл бұрын
@J G You forgot Dragon Balls.
How often should you lubricator the throttle and clutch cables?
@SimpleSimon
3 жыл бұрын
at least once a year, if your bike sits in the rain or you ride in the rain you should do it more often. Thanks for watching.
What cable grease do you use? Not the lube but the grease.
@SimpleSimon
3 жыл бұрын
I use Synthetic Bearing grease. Thanks for watching
How often do you recommend lubing your throttle and clutch cables ? ... lets say on a brand new bike .. each year .. two years ? ...
@SimpleSimon
5 жыл бұрын
The Z900 manual suggest at 1,000 miles to adjust and at 7,500 miles to adjust I would lube them also. Now if you do alot of rain riding or you store your bike outside I would lube at least once a year. Any time the throttle feels sticky or slow to return I would lube at that time also.
@8OneOfTheNobodies8
5 жыл бұрын
@@SimpleSimon Thanks for the answer :)
TY!
@SimpleSimon
2 жыл бұрын
Thanks for watching.
I'm not understanding the need for that little cable tool. Why not just use the straw to spray lube in the cable housing?
Could you use this "wd-40 specialist dry lubricant" .. just curious ..
@SimpleSimon
4 жыл бұрын
Not sure, I have never tested it. I always try and use lubes and fluids that are designed for that specific application. Thanks for watching
Hello, what type of lube did you use to apply on the ball/tip of cable? Just a general grease or a specific moto grease? Thank you?
@SimpleSimon
3 жыл бұрын
I used Synthetic bearing grease you could also use lithium grease or silicone grease. Thanks for watching don't forget to subscribe.
@mustbescud
3 жыл бұрын
@@SimpleSimon Thank you. I'll look into those. Realised i put a question mark on after thank you on the other comment lol. Cheers sir
Nice, thanks. Btw why are there 2 throttle cables there? (cwl)
@SimpleSimon
3 жыл бұрын
Hi Pokemon17007 great question, the second cable is the throttle return cable. It is a safety cable incase your throttle doesn't snap back you can force it closed. Thanks for watching.
@pokemon17007
3 жыл бұрын
@@SimpleSimon wow, I thought it would be something like that, very nice, thanks for your info. 👊
Hell i used wd40 before watching this vid.. will this have any bad effect later?
@SimpleSimon
3 жыл бұрын
No your should be fine unless you ride in lots of weather it could start rusting. Thanks for watching don't forget to subscribe.
I just cannot get this to work no matter what I do. I do not have nearly as much slack as you do. Everything is so tight that I can’t complete this and put the throttle back together
@SimpleSimon
2 жыл бұрын
Sorry it took so long to reply did you get it resolved?
@ethancknight
2 жыл бұрын
@@SimpleSimon No problem, I ended up leaving it with a shop. They replaced the cable with something different. works well now.
So only lube one cable??
@SimpleSimon
2 жыл бұрын
you should lube both cables if you can. Thanks for watching.
That is not sticky mine can stay in that position