LS SWAP UNDER A $1000, Third Gen Camaro LS Engine Swap
Автокөліктер мен көлік құралдары
On todays video I will be showing you how you can swap your 3 gen Camaro for under a $1000, this only works if you have alot of the factory parts already still in t he car, like your factory transmission and radiator as that will save you a lot of the cost.
As you will see in the video by shopping around and getting a complete motor you can save you tons of money and time, you can save even more money by making your own wiring harness out of the factory ls wiring,.
You can also save money by using the truck oil pan and pick up tube and just having them cut down and welded back, you can use universal ls swap engine mounts and you can even use the factory ls flywheel with some mods.
Your factory LS engine computer will need vatts took off but should not cost no more than $150
If you have most of the parts for your car besides a engine they no reason you cant do this LS swap on your Camaro for under a $1000
If you enjoyed this video be sure to drop a like and leave a comment I enjoy hearing from everyone, be sure to show your support for my channel by smashing that subscribe button!
Link to Camaro engine install video: • Installing A LS Into A...
Пікірлер: 152
Switching to car accessories, switching intakes, and headers are where people end up spending a ton of money thats not needed, purley for looks in most instances. Great video
@TattsForLife
5 ай бұрын
Thanks
@KeithSmith-pi8sf
2 ай бұрын
@@TattsForLifeClarence in room is why we really do it.
Nice set up most people say you can’t do a budget swap but seems like it’s more about experience and hard work
@TattsForLife
2 жыл бұрын
Thanks, you can do a budget swap if you don't half to buy everything, like a trans and radiator and fuel system, if you just doing a engine swap its pretty cheap if you budget and shop around
@mauriceharris5822
Жыл бұрын
You want to do mine???? Pleaseeee
@dreannifurr7650
Жыл бұрын
Yea he did a really good job
Saw the third gen instantly subbed 🤘🏼 third gen life!
@TattsForLife
Жыл бұрын
Thanks, its been a fun build so far
great video! lots of good info. keep up the great work!
@TattsForLife
Жыл бұрын
Much appreciated!
Probably watched this about 10 times to take notes. Great video
@TattsForLife
Жыл бұрын
Thanks I have more coming soon
@deebogotyou1494
10 ай бұрын
I thought I was the only one
Extremely helpful. Thanks. Subscribed and liked.
@TattsForLife
2 ай бұрын
Awesome, thank you!
A bald eagle was born. This thing is beautiful.
@TattsForLife
Жыл бұрын
wait to you see it in paint
Nice work my guy! I just sent this to my son.
@TattsForLife
3 ай бұрын
Thanks, happy you enjoyed the video
Nice dude, I like it!
@TattsForLife
2 жыл бұрын
Thanks!
Great build man, I've got pretty much the same setup but with the 6.0L GMC Denali XL engine. I used the factory passenger side truck exhaust manifold and a factory driver's side exhaust manifold from a 2001 V8 Camaro engine. I've added a 150hp nitrous kit and promptly broke the TH400 slip yoke. Replaced the slip yoke and it also broke. I ended up discovering that a 4L80E slip yoke is much beefier and it fits the TH400. It does require a specific universal joint to mate to the drive shaft, but so far, so good.
@megatonesilva6546
Жыл бұрын
Also, not mentioned in your video.......there will be a bracket needed to attach onto the TH400 transmission which is necessary to secure the (axle) torque arm.
@TattsForLife
Жыл бұрын
kinda of homemade that part lol, but yes that is great info, I forgot that part
@TattsForLife
Жыл бұрын
Sounds like a fun build
@megatonesilva6546
Жыл бұрын
It's always a fun build when you put it all together inexpensively.
Thank you for sharing!
@TattsForLife
Жыл бұрын
Thanks for watching
Hey man great video at 1.23 you said you can make it awd what other parts are necessary to make it awd. I live in colorado and would love yo be able to use my camaro all year long
Thanks for the information
@TattsForLife
6 ай бұрын
Welcome
Nice setup I'm planning to do a ls swap in the future
@TattsForLife
7 ай бұрын
They sure are fun to do, I am going to swap my v6 firebird next
Thanks great info!
@TattsForLife
6 ай бұрын
Glad it was helpful!
Good video 👍
@TattsForLife
Жыл бұрын
Thanks for the visit
I'm about to start a swap on my 3rd gen hopefully I can get it done this cheap
@TattsForLife
8 ай бұрын
I say u can, just watch your spending
What fuel pump did you use? Can’t find one nearly that cheap. Thanks!
I'm doing a LS 5.3 Truck motor swap in my 1984 firebird. I'm watching this like a hawk!
@TattsForLife
6 ай бұрын
Thanks for watching
@calicancer661
4 ай бұрын
Post up some videos Interested in getting a 2nd Camaro and throwing a ls into that one
@TattsForLife
4 ай бұрын
I have some new videos coming on the 2gen Camaro soon@@calicancer661
@calicancer661
4 ай бұрын
@@TattsForLife ment to say 3rd gen
Wabbit season………..good info, great 👍 video…..and yes you too can do it on a tight budget, I’ve done it 4 times already
@TattsForLife
Жыл бұрын
Thanks 👍 for watching
Just found and subscribed. Phillip Hall
@TattsForLife
Жыл бұрын
thanks
Hi what did you about the torque arm and cross member
Does anyone know if the v6 manual transmission will pair up with the newer ls engines?
Nice man 👍 I want to Ls swap my 92 305, I want power but not too much power yk
@TattsForLife
Жыл бұрын
A ls is a great upgrade, prob about 200+ more hp than a stock 305 just by a engine swap
@numbers7889
Жыл бұрын
@@TattsForLife just what I’m looking for all I need is around 300+ hp and I’m good, and $1000 is really worth it
@TattsForLife
Жыл бұрын
Yea and the newer engine runs so great
What was the ebay header sellers name?
How did you hook the 700r4 trans up, far as the kick down cable on the throttle body
@TattsForLife
Жыл бұрын
This car has a turbo 400, but I have did a 700r4 behind a ls, went lowes and sliced the tv cable with cable from lowes, u can also buy 700r4 cables for ls swaps, I always hook the cable up where the cruise control went on the throttle body
🔥🔥🔥
@TattsForLife
Жыл бұрын
thanks
So you used the factory tank? If so it must have a sump and baffles already
@TattsForLife
Жыл бұрын
3 gen Camaros are factory fuel injection cars, they all ready setup for a in-tank fuel pump
Hello my question is do u have to use a V8 subframe from the same year?
@TattsForLife
Жыл бұрын
the subframes are the same on all 3 gens, just the motor mounts on the subframe is different, would need to switch to v8 mounts on subframe
Where did you order your motor mounts that you say made it easy to put in ? What model truck did the radiator hose come from? thanks in advance if you can help me out. Watching this video makes me want to try to keep my car instead of selling it
@TattsForLife
Жыл бұрын
I have a video on just the motor mounts if you search on my channel, the hose is from a stock 2002 Chevy 1500
@Frankcontreras312
Жыл бұрын
@@TattsForLife thank you sir I really appreciate the answer back. Thanks for the help
What did you use for a throttle cable? Swapped a 5.3 in my 89 firebird and not sure what I should do
@TattsForLife
Жыл бұрын
A cable from a 5.3 truck I think what I used
Let's hear it run
@TattsForLife
Жыл бұрын
Lol I half to add relays lol they borrowed and being used in my ls swap rollback, I think I have videos of this car running lol if not I have some soon when I start posting paint videos of it
Im on the hunt for a manual z28 3rd gen. Wanting to do an LS swap with it.
@TattsForLife
6 ай бұрын
Manuals are fun, and its pretty easy to do a LS swap on a Manual
Ok but how did you flash the ecu? They typically have to be unlocked to run because of the security?
@TattsForLife
Жыл бұрын
you can mail your ECU off to get it flashed for find someone local, usually runs $50 to $100
What type of electric fans you use?
@TattsForLife
Жыл бұрын
Stock 3 gen camaro fans
Can the L96 fit in there. Currently I have the 305 motor and 700R trans.
@TattsForLife
2 жыл бұрын
yes it could
@trentdawg2832
Жыл бұрын
L96 is the same size as 4.8
What fuel pump did you use and did you have to run a regulator?
@TattsForLife
Жыл бұрын
I made a video on the fuel pump subject, the video has part numbers and how I installed it, I used a truck intake with built in fuel regulator
How much do these cars go for and are they more common in your state also can the a/c not fit ?
@TattsForLife
Жыл бұрын
idk really, they range from $100 to $3500 I would say here, as for AC it would fit with factory AC box
@ArkArmy90
Жыл бұрын
@@TattsForLife ok thank you and would trans am work the same way or is that a different car altogether ?
How did you get the alternator clear the hood mine is hitting I have a firebird with the truck brackets as well
@TattsForLife
Жыл бұрын
If you used motor mounts like I did, then u use clam shells attached to them, they two dif clamshells from factory, a taller set by about a half inch and a shorter set, this car has the what we call car set of clam shells on it which lets it set a bit lower, but GM tossed the mounts in anything with a sbc lol I seen factory cars with the taller mounts
@davidtaylor5082
Жыл бұрын
@@TattsForLife I’m using the factory clamshells that came on my small block 5.0 small block the engine sits so low in the car I probably only have 1/4 inch between the oil pan and steering cross shaft
@TattsForLife
Жыл бұрын
do you have the bigger LS alternator or the smaller amp one
@davidtaylor5082
Жыл бұрын
@@TattsForLife now that is a good question I really don’t know didn’t know the truck 6.0 had two different sizes but I’ll look into it
@TattsForLife
Жыл бұрын
yah, they have 2 different ones, they even take two different belts
I’m having issues with my 6.0 corvette ac compressor and my oil pan clearing the crossmember
@TattsForLife
8 ай бұрын
Did you use a fbody pan or a modified truck pan? We used a modified truck pan on this car, it was shorten in length, and we dropped the engine in by its self Trying to install the transmisson and engine at same time will sometimes make the crossmember harder to clear do to the steep angle, doing engine only, let's u drop engine almost straight down in a smooth action, with little to no angel
Which flywheel do you recommend for a 700r4
@TattsForLife
Жыл бұрын
I really like the factor 6.0 flywheels with the spacers instead of the dish, but either one you can make work by widen the holes, you can buy a flywheel already works without any mods that is cheap on jegs or speedway
I seen a forum online saying that the motor mounts arent the same on the lq4 and the ls1 what mounts do you have
@TattsForLife
4 ай бұрын
I use universal mounts, I have a few videos on my channel on the subject
@itzaxo8860
4 ай бұрын
@TattsForLife perfect thank you buddy
Hello I have a 91 rs I'm LS swapping it do I have to change the power steering gear box.?
@TattsForLife
Жыл бұрын
You do not, we are using the factory steering box on thos car with faxtory ls pump
@user-yz1fl3tz9n
Жыл бұрын
Ok thanks 👍
Is the eBay wiring harness just plug and play ?
@TattsForLife
5 ай бұрын
Yes, if it's for the ls1 adapter plugs would be needed for injectors and mass air flow, if it's for truck engine none will be needed
Which motor mounts did you happen to use for this swap?
@TattsForLife
Жыл бұрын
I have a video on that, I used the cheap $30 adapters lol 😆 same ones I used in the ls c30, s10, 2 gen camaro, they work great
@1sicz28
Жыл бұрын
Man it’s beating the prices I’ve seen so far. $100 plus for the stand and about the same for the actual motor mounts. I appreciate your vids and quick reply!
@TattsForLife
Жыл бұрын
@1sicZ28 thanks for watching, I done a many ls swaps and if you don't watch your self you will spend a ton on parts
Are those bmw wheels on your 3rd gen camaro if so what size are they
@TattsForLife
10 ай бұрын
I am not sure, they was from a trade lol had to use adapters and spacers to make them work
What drive shaft did you use?
@TattsForLife
10 ай бұрын
A home-made one
How is your exhaust ran?
@TattsForLife
9 ай бұрын
Long tube headers from ebay for a 3 gen camaro, and side pipe exhaust
Don’t some LS engines not have a fuel return?
@TattsForLife
Жыл бұрын
some intakes don't have a fuel return, but all fuel injection systems use a fuel return setup, some is built into the fuel filters older LS engines had the return on the intake, some run fuel regulators
Well now you got me wanting to do it….
@TattsForLife
Жыл бұрын
the LS is so smooth and so much fun, its a worth wild swap
how long did it take to install?
@TattsForLife
Жыл бұрын
You could be running driving in a weekend if you have the free time and parts on hand
@peted5217
Жыл бұрын
A long time. Many unplaned details to deal with on any transplant. Problem solving and fabrication skills will get a workout.
How fast is this?
@TattsForLife
Жыл бұрын
Faster than the ford behind me lol
4l80e would be ideal
@TattsForLife
Жыл бұрын
It would be, lol but done had a turbo 400
Do your gauges work?
@TattsForLife
Жыл бұрын
Some do some don't lol 🤣 ones wired up does, wireing was a mess on this car before the swap, I have videos on the c30 with ls swap with factory gauges working and a sbc 4th gen trans am with factory gauges on my channel, just wire up ls ecm readout wires to your factory gauge wires and they should work
@sliferdude11
Жыл бұрын
thank you so much im in the middle of putting an 02 5.3 with a 4L65e in my 89 Camaro and I’m just trying to plan ahead with it wish me luck sir
@TattsForLife
Жыл бұрын
@@sliferdude11 if you using the truck oil pan it will drag the ground lol, so shorten it or change it before u install your engine
😱
@TattsForLife
Жыл бұрын
😱
I bet it don’t even run
@TattsForLife
8 ай бұрын
Ouch lol 😆
You sound like an Englishman with an American Southern accent
@TattsForLife
Жыл бұрын
I don't hear the accent everyone said I have? Maybe they the one with a accent lol
This guy weally wubs me the wong way
@TattsForLife
Жыл бұрын
😱
@evanhooper1
Жыл бұрын
Bruh that's not cool. Don't say that shit
What’s with the stupid hand signals I can’t watch this
@TattsForLife
Жыл бұрын
😅
another ls swap..
@TattsForLife
Жыл бұрын
LOL have a lot more of LS swaps on the way lol
I just don't see the point in doing an LS Swap in a ThirdGen unless you're going to do it right. I suppose if it's the ONLY car you have and the motor in it is blown and you just need something to drive then sure I guess doing it this way is fine. However, I personally feel like if you're going to do an LS swap into a Thirdgen you should at least do a top-end rebuild with new springs, valves, lifters and camshaft. Also, for the love of god don't use the piece of shit 700R4 transmission. Even a used 4L60E or 4L80E from a Pick-N-Pull is going to be more reliable than the 700R4.
@wideopenthrottle1165
Жыл бұрын
Congratulations on having an opinion.
That’s what you call a chicken 💩 swap 😂
@TattsForLife
Жыл бұрын
Ouch
@deebogotyou1494
Жыл бұрын
You’re an asshole, it takes a lot of knowledge, experience, and skill to put this together like he did
@75southgardening58
Жыл бұрын
@@deebogotyou1494 not really, we were doing ls swaps back in 2008, all the info was online then. Old news brother😎
@bobvomhof5699
Жыл бұрын
Stfu. Why is the internet so full of dbags...
but dont you need to swap the rear out? the 272 or whatever gears suck
@TattsForLife
Жыл бұрын
this one had a 373 in it
@peted5217
Жыл бұрын
This axle unlikely to survive much abuse.