Great vid! Thanks for talking in easy to understand terminology, much appreciated 👏🏽
@dtperformance256
2 ай бұрын
@marcjessie8156 Thanks for the kind words. I try to answer the questions that I would ask and show as much detail so that is easy to understand what I am talking about. I hope this helped you out. Thanks again for the comment and for watching.
@yourpcmd5 ай бұрын
Thanks for another video, my friend. As mentioned in a previous video you did, I also had to do notching with my truck. Hated to do it, but it was necessary. Looking forward to your next one.
@dtperformance256
5 ай бұрын
@yourpcmd Yeah I tried every fitment that I could manage to not notch the crossmember, but it had to be done. As always thanks for watching, the support, and the comment!
@stevea67225 ай бұрын
Don, square corners create a stress riser at the point. Even a very small radius will virtually eliminate that stress riser. Just something to think about. Welds look fine, 1/8" steel probably doesn't need to be beveled. Looking good, interesting build.
@dtperformance256
5 ай бұрын
@stevea6722 Good points I didn’t mention. I did bevel some of the corners and now that I am thinking about it I wished I would have beveled a little more than I did. Thanks for the information, commenting and watching!
@backyardbuilttrucks14 ай бұрын
I did a 7 qt pan on sons 6.2 on his 98 and cut it about the same as I did for the 509 BB I have in mine .
@dtperformance256
4 ай бұрын
@backyardbuilttrucks1 I didn’t want to make the cut, but really no way around it with my set up. How is yours working out, any issues? Thanks for watching and commenting.
Пікірлер: 11
Great video DTperformance!
@dtperformance256
5 ай бұрын
@srtdmore Thanks for watching and the comment!
Great vid! Thanks for talking in easy to understand terminology, much appreciated 👏🏽
@dtperformance256
2 ай бұрын
@marcjessie8156 Thanks for the kind words. I try to answer the questions that I would ask and show as much detail so that is easy to understand what I am talking about. I hope this helped you out. Thanks again for the comment and for watching.
Thanks for another video, my friend. As mentioned in a previous video you did, I also had to do notching with my truck. Hated to do it, but it was necessary. Looking forward to your next one.
@dtperformance256
5 ай бұрын
@yourpcmd Yeah I tried every fitment that I could manage to not notch the crossmember, but it had to be done. As always thanks for watching, the support, and the comment!
Don, square corners create a stress riser at the point. Even a very small radius will virtually eliminate that stress riser. Just something to think about. Welds look fine, 1/8" steel probably doesn't need to be beveled. Looking good, interesting build.
@dtperformance256
5 ай бұрын
@stevea6722 Good points I didn’t mention. I did bevel some of the corners and now that I am thinking about it I wished I would have beveled a little more than I did. Thanks for the information, commenting and watching!
I did a 7 qt pan on sons 6.2 on his 98 and cut it about the same as I did for the 509 BB I have in mine .
@dtperformance256
4 ай бұрын
@backyardbuilttrucks1 I didn’t want to make the cut, but really no way around it with my set up. How is yours working out, any issues? Thanks for watching and commenting.
Like, comment, and subscribe baby!