This was my main gun for everything except primer for many years and it’s still rocking .After using the Satas and my Tekna for awhile with waterborne,this is again my main base gun since we switched to solvent with the orange cap and 1.3 .It’s a great all around gun

@kandyman5315

2 жыл бұрын

Yes it is thanks for the feedback

@davidparker9676

Жыл бұрын

The LPH400 was one of my first quality guns when I got serious about painting. Now I have all the big flagship guns of the major brands, I still like to use the LPH for smaller jobs like hoods, doors and fenders. It is a little bit slow compared to my other guns but never disappoints when it comes to the finish. I recommend it to any painter and especially to new painters for a great do-it-all-gun.

I just inherited my brother’s LPH 400 LV 1.4 with the chrome cap.He’s had that gun for 20 years and I plan to use it to clear my El Camino. I also have his SATA RP base gun. He passed away suddenly two months ago and it will be an honor to use his guns.

@kandyman5315

2 күн бұрын

Sorry for your loss

I switched from Sata to lph400 and immediately sata was gun for primers and fillers... 400 is beauty :) ,and great work man ..

@kandyman5315

2 жыл бұрын

Appreciate the comments 💯👌

You seem to do an excellent job no matter what gun you’re using. You sir are definitely one of the best.

@kandyman5315

2 жыл бұрын

Appreciate the support and thank you.

@davidparker9676

Жыл бұрын

A good painter can get a good finish with almost any gun, it is just a lot more work with lower quality guns.

Awesome job Kandy man. I feel u crush it with any gun u use! I put down my sata’s back in 2000 and never turned back. Iwata has been my gun of choice ever since. The orange cap was my work horse for many years! I’ve made a lot of money with it. Still use it for sealer and solid colors. I’m actually about to re-kit it soon.

@kandyman5315

2 жыл бұрын

Appreciate the support

Saya dari indonesia, yang selalu mengikuti video Mr. Kandyman....luar biasa and good job....SEMOGA GUN LPH 400 jadi milik saya Mr....😁💯👍

I'm not a paint guy.Back in the day my favorite was the Binks number 7. I painted with 99 A pitch black.Dupont Centari. Won many paint awards.Great video

@kandyman5315

2 жыл бұрын

Thanks for the comments 🙂

@tonydiesel3444

2 жыл бұрын

Way back in the day yes Banks number seven and the Sharpie cup gun

LOVE that gun! Used it for five years now every day. Keep it clean and it will produce for years.$$$

@kandyman5315

2 жыл бұрын

Great to hear 👍 thanks for watching.

Personally I always preferred the silver cap for clear with the lph400 💯💯👌🏽

@davidparker9676

Жыл бұрын

Have you tried all three caps? The orange seems to be the favorite and the purple is the best kept secret for laying clear like glass.

Nice review and work 👍🏻. I love my LVX cap for sealer and base, LV4 for clear.

Very nice finish the LPH400 looks like it lays the clear down really flat. I don't have an LPH400 but apart from the tulip nozzle it looks the same gun as my W400 Bellaria🤔👍 John UK

@davidparker9676

Жыл бұрын

The Bellaria is a great gun, The W400 guns are illegal to use in body shops here in the USA because they are not EPA compliant. The LPH400 is basically a modified W400for the North American market. Cheers M8!

I would love to see you spray some base coat/sealer through it. I bought mine for base but it seems like most people get better use out of it for spraying clear. Great video regardless!!

I hope "my friend Pete" is paying attention to this. Pete likes to buy new guns all the time.

@kandyman5315

2 жыл бұрын

👌😁

Man those panels came out beautiful...nice work!!!

Iwata is my go to for clear and airbrushing great video man thanks for sharing 👍

Nice paint job.. i like your gun. For some reason i dont know if any one of you notice it look like the door near the handle has a dent? It feels wierd.not sure maybe its just the shape of the vehicle?

I had this gun and it used more clear than my sata 90 1.3sl did at the time. It depends on what you spray & how you use it. 24 spi, i never could have sprayed that low unless the clear was junk . Like chromabase 600 from back in the day 😅

this gun is the best base gun hands down and the silver cap is the best all around gun especially for single stage and clear

@kandyman5315

2 жыл бұрын

💯

Nice video 👍 Just need some clarification on model numbers on this gun. I mainly shoot all overs in single stage and base. Kinda overwhelmed with all the different guns available but I’m seeing the extreme with the 1.3 and wondering if that’s the same one you are demonstrating? I use the ws400 1.3 for clear and love it. I like a little slower gun but not too slow. Any thoughts on tip size in that gun for what i shoot? Thanks for the input 😎

@kandyman5315

7 күн бұрын

Yes it is

Have the same one but only with a 3.1 tip & orange cap, it sprays clear pretty good but it does leave a little peel not too bad & usually spraying around 25 psi

I bought lph 400 in 09 for clear works okay for OEM finishes it is slow 1.4 I went back to my w400 1.4 lv4 it's a bit faster and can handle the heavier clears

Man I bought this gun and never used it since I went to the prolite and then jumped into a dv1 for clear. The fan on this gun is insane. Need to open the box and put it to work.

@kandyman5315

2 жыл бұрын

Good gun

@ErikisOfficial

Жыл бұрын

Sell it! Lol

Nice job. I have this exact same gun....I'm thinking of getting the purple cap.....I've heard it lay's the clear like glass

@kandyman5315

2 жыл бұрын

💯

@davidparker9676

Жыл бұрын

Absolutely right. LVB cap is great at atomizing the clear and base. It is a well kept secret.

I have the same gun with 1.3 the purple and silver cap love the gun it's like a 3 in one.

@kandyman5315

2 жыл бұрын

😄😁😁

@kennethandersen6920

Жыл бұрын

Hi there..how are your settings when using the purple cap..i bought that cap some time back but can figure out the massive fan it makes..any tips on using the gun with this cap??

@3rekoatskustoms929

Жыл бұрын

@kenneth andersen I haven't used it much, but for me turn all the way out they in until the trigger moves and then adjust the fan. I do motorcycle so I don't need a big fan.

Hi. and which one is better? iwata w400 or lph400? do you have a lph440? thanks.

@kandyman5315

Жыл бұрын

Both are great w400 is alot cheaper. But not compliant in the US .never tried lph440

With that exact same setup if you up the air a bit or/and turn off the material knob a bit do you think it can lay down flat?

Great to see you trying out different guns you could make the harbour freight purple gun look good keep the content comming brother ( Arther) 🤣🤣

@kandyman5315

2 жыл бұрын

Lmao 💪

@davidparker9676

Жыл бұрын

The purple Harbor Freight gun is surprisingly good (sometimes).... it just doesn't last. It is assembled with silicone sealant that breaks down and don't try to take the gun apart or else it will never work right again. Those guns cant be beat for costing less than $10 on sale with a coupon. Definitely a one or two use gun before you throw it in the trash. The solvent to clean it costs more than the gun.

I have that gun too, same size tip. Its my clear gun and I prefer it to the newer supernova series Iwatas.

@kandyman5315

Жыл бұрын

Great gun for sure 👌

@davidparker9676

Жыл бұрын

The supernova is such a finicky gun when it comes to the settings, once you get it dialed in it is magical. The LPH400 is very easy to setup and use, parts are plentiful and cheap compared to other guns.

I appreciate the your coverage on this. I've had mine for 4 years as a dedicated clear gun. I have to say I read almost the full pdf from iwata and this gun is sort of an LVLP it was saying. But since epa regulations don't recognize that term (in their infinite wisdom) so they just call it an HVLP. What pressure did you spray it at?

@kandyman5315

2 жыл бұрын

Thanks for the insight. I sprayed it at 24 psi

hey Great Review! Liked and subscribed. Out of all your guns you have used, would you say this is the best low cfm gun with lowest overspray? I spray mainly at home where thats a big factor.

@kandyman5315

4 ай бұрын

This is a great gun

@arvizu619

4 ай бұрын

@@kandyman5315 thank you brother! 🦾

Nossa se eu ganhasse uma usada já estaria satisfeito pra o meu serviço de pintura huauu, mas valeu mestre.

Whats the part number on the paint coat your using looks really nice and practical for this texas heat 😂

@kandyman5315

2 ай бұрын

Nah

Would this be a good gun to spray candys , basecoats as well ?

@kandyman5315

Жыл бұрын

Yes it would

Ever touched the iwata wider 4L? It's the model that's now replacing the LPH400

@kandyman5315

2 жыл бұрын

No I haven't tried it is it compliant

@jamessakimae9655

2 жыл бұрын

@@kandyman5315 hvlp, seen on amazon for $300, but on ebay it comes from Japan at around $380 but with more tip size options

new painter here whats the difference between lph400 and w400? and what do you recommend?

@kandyman5315

Жыл бұрын

Lph400 👌 higher quality. W400 is a great gun for the money

I use the silver cap. Do you think the orange is significantly better? Sounds like a perfect cap for hot days.

@kandyman5315

2 жыл бұрын

To new to tell but definitely a good 👍 gun

@jq8792

Жыл бұрын

I think the orange cap is better for base not clear.

@davidparker9676

Жыл бұрын

@@jq8792 The orange cap is good for everything. The purple cap is perfect for custom work as it lays clear like glass. I have all three caps and never use the chrome cap anymore, orange all day and purple for special jobs.

@davidparker9676

9 ай бұрын

@@zurus172 29 psi, full fluid, full fan (adjusted for even pattern). Depending on your clear, MS HS or UHS, you need to adjust the fan from full to avoid a dry spot in the middle. I usually spray a UHS clear so I don't need to bring the fan in very much.

U ever tried shooting clear with ur dv1 base? I think it's faster then the clear gun at 27 psi lol

@kandyman5315

Жыл бұрын

I have not but have heard some people doing it and like it

@andrewybarra2304

Жыл бұрын

@@kandyman5315 it actually works badass lol lays down nice and flat flatter then my prolite that's forsure

Hey I’m in school for collision so I don’t know much but what cup do I need and adapter for this gun would greatly appreciate it thank you

@kandyman5315

Жыл бұрын

3m 26003 2.0 adapter 16mm female thread and a pps 2.0 hard cup

@jeezuscastaneda2564

Жыл бұрын

@@kandyman5315 suscribed lol

Hey bro love the video I just subbed.. Question… I see you mention certain guns give certain finishes as far as orange peel goes and I heard you say mirror flat slick finish…. I’m currently restoring a classic and I’m doing an engine bay … which gun would you say gives you that ultra slick/ flat mirror finish?

@kandyman5315

Жыл бұрын

Dv1 c1 air cap

@adriancastillo5521

Жыл бұрын

@@kandyman5315 danggg would of never thought the dv1 for it… the orange and black gun right? Any tips of adjustments and materials consumption ? I usually spray house of kolor high solids show clear

@kandyman5315

Жыл бұрын

Wide open fan and fluid

@adriancastillo5521

Жыл бұрын

@@kandyman5315 Okk thanks one last question what tip you recommend? I saw the dv1 has a few. Main color I’m Spraying is Lexus nori green pearl… paint code 6X4 it’s a metallic

what full mask do you use? you by chance have a link to it?

@kandyman5315

2 жыл бұрын

3m versaflo tr800

Hi kandyman I'm watching this video with u using the eye water l pH 400 orange cap I am a professional painter myself I would like to get some particular info on where to get this gun where would u recommend

@kandyman5315

10 ай бұрын

Hi the Amazon link is in my description 💯

Why wouldn't you want it too flat? I thought that was the goal?

@kandyman5315

4 ай бұрын

We are looking for an undetected repair oem finish

@shaunmcinnis566

4 ай бұрын

Ok, gotcha.Thanks@@kandyman5315

Beautiful job Kandy Man! How does this gun compare to the W400LV WBX.

@kandyman5315

11 ай бұрын

Very similar

Man, looks like glass. I have the lph400 orange cap. I only do resprays, so I want the smoothest finish. What clear did you use?

@kandyman5315

Жыл бұрын

Sherwin Williams cc200. 👊👊

Love that gun also. Sorry if I missed it what clear do you remember doing that in ? That's your old booth also, noticed that immediately 😅

@kandyman5315

Жыл бұрын

Sherwin Williams cc200

@davidparker9676

Жыл бұрын

The air doesn't move in that booth, the overspray just lingers. The new booth is a huge improvement.

Very good job 👍

@kandyman5315

2 жыл бұрын

Thank you

I been hearing alot about the LPH 400. Imma have to try one out one day

@kandyman5315

Жыл бұрын

Great gun

@marcuswhite1403

Жыл бұрын

@@kandyman5315 I've heard. I currently use the Copper Tekna Clearcoat gun and love that gun. I've been using Devillbiss guns for years

@marcuswhite1403

Жыл бұрын

@@kandyman5315 What PSI do you normally spray your clearcoat when using the Tekna Clearcoat gun?

@kandyman5315

Жыл бұрын

25 psi

@marcuswhite1403

Жыл бұрын

@@kandyman5315 I may have to try that. I've been spraying at around 30 psi with it. I'm use to using medium solid clear coats, but using hs clears now and trying to get use to it. On fenders and doors I can get it to lay down fine, but hoods are giving me problems getting it to lay down good

it's great gun i use only for clear whit 1.3

Great video. How do you think it would perform for kandy?

@kandyman5315

2 жыл бұрын

If I used it for kandy I would choke it back .it puts out a lot of material but dialed in I'm sure it would be good 👍

@mpizzle24

2 жыл бұрын

@@kandyman5315 good to know thanks. I loved the vids you did on your Olds using the uk kandy. Do you think youll ever do a uk vs kbc to show the difference in effect? Would be an interesting watch

@kandyman5315

2 жыл бұрын

Not sure maybe if I did some pattern work but I usually only use UK kandy

The lph400 likes thin base made 321 reducer

Nice video.. can you show your thoughts on the Iwata Kiwami 4...???

@kandyman5315

2 жыл бұрын

It's a good gun for the money but it's not compliant for us professionals at shops wish it was

@mikeammargon6847

2 жыл бұрын

@@kandyman5315 do you believe it gives the same type of finish as this gun does..or at least very close???

@kandyman5315

2 жыл бұрын

Yes

@105Minh

Жыл бұрын

@@kandyman5315 hi, what do you mean by this?

@mikeammargon6847

Жыл бұрын

@@105Minh it's not compliant to bodyshops in the USA.. has something to do with the amount of paint solvent sprayed into the air... if that's what you were asking..

You spoke of a tekna , which tekna are you referring to?

@kandyman5315

8 ай бұрын

Gold clear gun

Is there a big difference in 1.4 vs 1.3 ?

@kandyman5315

Жыл бұрын

Yes

Hello, could you tell me where to get the paint deposit? because dn amazon these pistols do not come with a deposit and I don't know what kind of thread size I want to import them to Peru thanks

@kandyman5315

Жыл бұрын

Ebay

@JoseMiguel-su1ve

Жыл бұрын

@@kandyman5315 ok thanks and do you know what size of thread and size of the deposit I should buy so that it fits the 400 lph gun well?

Super efficient gun !

@kandyman5315

Жыл бұрын

👍

I’m a huge iwata guy, 99% of my guns are iwata (33 iwata) and ( 1 3m performance)

@kandyman5315

2 жыл бұрын

They make great guns for sure 💪

Hi mate could you tell me what that mask is your wearing . And is it 100 percent going to keep my safe from the isiyonites. When I'm painting outside thanks

@kandyman5315

8 ай бұрын

3m tr 800 it's a great setup

@katiehinds1648

8 ай бұрын

And is it guaranteed safe against isiyonites. Thanks

Very nice

@kandyman5315

11 ай бұрын

Thanks

Is a really good gun I have one to

@kandyman5315

2 жыл бұрын

💯💪💪

That's my clear gun it's a canon with 1.4 orange cap I have a video I posted works good

@kandyman5315

2 жыл бұрын

Great gun for sure

Had this before… nothing special . No good for base and not enough material for clear. Tekna way better guns, no questions.

@kandyman5315

2 жыл бұрын

Thanks for your feedback

Its 1.3 or 1.4 ?

@kandyman5315

Жыл бұрын

In this video 1.4 but I change it to a 1.3 for the clear I'm using now

@mikoajkopernik7664

Жыл бұрын

@@kandyman5315 how u like it now 1.3 its better for You ? I got same gun 1.3 but i need learn how to spray with , did u got full open material ?

Lph 400 for base 20 years w400 lv4 clear 20 years done millions..

@kandyman5315

2 жыл бұрын

Nice 💪💪

Tell that gun was putting out a big fan booth got foggy.

POPPIN ' !!!

Man I wonder how guys say this gun is slow,,right now I use this more than my ws400 for clear

@kandyman5315

2 жыл бұрын

It a fast gun to me for sure 👌👍

@andrelawrence9644

2 жыл бұрын

Plus it’s so efficient with materials

@Kaabosurron

2 жыл бұрын

Its probably because they use 1.3 and chrome cap

@andrelawrence9644

2 жыл бұрын

@@Kaabosurron so u think the chrome cap is slower,,from your experience which cap has the biggest fan and better pattern ,,and which atomize the best

@Kaabosurron

2 жыл бұрын

@@andrelawrence9644 the chrome cap is good for what it is made for "clear" because of the medium pattern at full open. The orange is made for base because of the huge pattern helping with metalic laying even. The orange is more versatile because it can do basically everything just matter of setting it up. Also get the 1.4 it helps alot moving faster and can just turn fluid it if it's to fast for you

😅

I wonder what the lph400 with the silver cap lays clear. I have the same gun but I need more a mirror finish. I know all jobs with need a wet sand , buff and polish.

@kandyman5315

Жыл бұрын

I'm not sure I don't have it . But I did hear the silver one is best for clear

@kham383

Жыл бұрын

I find the silver LV4 cap lays a lot flatter than the orange LVX cap & the purple LVB cap.