Awesome video, I appreciate all the details and that you explained everything you were doing and had done I had no clue I needed to also lower the front. I'm only 5'3'' and this made all the difference

I have wanted to lower my bike (cb500X ) for years. Thank you for showing me it can be done and how to do it!

I'm also considering lowering my 2002 CB500X. Your video helps me understand what needs doing. Thanks heaps Mate!

@JosephVollmar

Жыл бұрын

Your welcome, just remember anytime you are doing anything like this, make sure the fasteners are good and tight, and recheck them after you have ridden a bit to make sure they don’t loosen up. Use loctite where possible.

@jacquespage888

Жыл бұрын

I heard it no good doing that think twice before you do that

Awesome video mate.Thanks for posting

PSR makes aftermarket kickstands for those bikes that have lowering links installed. I have one on my 2003 CBR 600rr.

Just be careful with those lowering links. Since they’re not one solid piece they are much weaker. Put on on my gfs 2018 cb500x and it snapped in half from some mild off roading. If you’re only doing street riding you should be fine but I would highly recommend against off roading with aftermarket suspension parts.

Nice tutorial. Thanks!

Thanks for a great video- 5'2" 65 year old male rider who just yesterday and decided it was too tall.

@poisonforlunch

Жыл бұрын

did you try a stock bike? im 5'2 as well and im aiming for this one

This was very helpfull to me. I’m short too and I’m looking for small adv bike. Thank you!

Thanks for the video. They make an adjustable kickstand for this mod. I got ours from T-Rex racing and we get the lean back in the kickstand after lowering. It is a big deal according to my wife.

Very informative. Thank you

Hi Joseph. Thanks for posting the video. I just had a look on Amazon. There are two kinds of lowering kits for a 2013 cb500x. One has new linkage and replacement bushes like the one you were fitting. The other has two replacement triangular mounting plates. It keeps the original linkage and offers 1.2 or 2" lowering. Do you think the latter would be safer and more reliable as it keeps the Honda linkage and bushes? Thanks Paul

Awesome video..tank from Malaysia. ❤

My friend bought a similar kit for her 2018. Turns out that center barrel adjuster was hitting the bottom of the shock. Had to grind both the adjuster and the shock to make it fit, and I I think if I try to lower it any more the shock will just hit the adjuster

Thanks for the video, I hope you got the time to replace that unsafe kickstand

Nice job, you can also buy a adjustable kickstand.

Dear Sir note that I live in Australia and I have Royal Enfield Himalayan ( I did not lower the suspension ) but I did buy an adjustable side stand from the UK and installed it and it made a big difference as I found that with the standard side stand that the bike was a little to up right and the bike did fall over once to the right hand side due to some uneven ground when I parked the bike, but now with the adjustable side stand installed this has fixed the problem I think you can buy an adjustable side stand for the Honda CB500X also? I also have a Suzuki DR650 that I had professionally lowered for me and yes the standard side stand was cut and re-welded to size to match the new lower height of the bike. Safe riding to all

It is a big deal when the kick stand is too long. It means a gust of wind can knock the bike over. Seen it happen four times to four different bikes. None were mine.

Is that replacement material strong and safe,? can you give me a link for that thanks

did somebody could explain to me that it not good to do that they said everithing change it that right

Thank you Joseph... I am 5-7 and I usually wear my boots so I can hit the ground with both feet on the forefoot....how tall is your daughter.. how is the balance and handling working out for her?

@JosephVollmar

8 ай бұрын

She is 5’-4” and she hasn’t had an issue at all with the balance and handling. She has put over 8k miles on this set up with no issues.

Well your video is a year old now, how's the link? I'm 5.2 and need to lower my 2013 hands cb500x about 2"

Can you provide info on your panniers and mounts please. Thanks.

@JosephVollmar

Жыл бұрын

I am not sure of the brand. They were on the bike when my daughter bought it, and I don’t see any markings. They are nice panniers, but are fairly cheaply manufactured. I see some generic options on Amazon, but it looks like Revzilla and EBay do have some options. If you can find what you are looking for there check with your local dealer or other motorcycle sites. They are out there, the CB500x is just a bike with a huge aftermarket following yet.

How much you lower the bike if it’s entirety front and back

@garrettpolson2566

10 ай бұрын

How much can you

@JosephVollmar

10 ай бұрын

I lowered it 1" in the front, and almost 4" in the rear. In the rear that is about the max for this kit. you could probably pull a little more out of the front if you needed to.

One foot down method.

🤟🖤🤟

how tall is your daughter?

Please share the ebay link

@JosephVollmar

Жыл бұрын

Here is the link www.ebay.com/itm/272706475600?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vKwxEhvBRhi&sssrc=2349624&ssuid=mfrpUNwFQea&var=&widget_ver=artemis&media=COPY

What’s her height?

@JosephVollmar

Жыл бұрын

About 5’4”

your bike could wabble on the road

That link looked dodgy compared to other ones on the market.

Remind her to ….. Always wear your gear keeper her head on a swivel Ride like everyone’s out to kill you And stupid hurts

Oh it’s a big deal, you will eventually drop the bike, plus harder getting on and off. Cut and reeled side stand, do it right, do it safe. You have also changed the handling characteristics by changing geometry..these should be carefully considered and tested by an experienced rider before jumping at handing off to your loved ones..good intentions, but consider.

tells kid don't park on a slant so it wont tip over 11:50 probably aint the first time hearing bs like that

She could just shift her butt one way or another and not lower the bike!