Better to replace whole arm,but it’s one of the best videos I have seen.

@dailyhandsdiy

5 ай бұрын

yes that's a batter idea...

Enjoyed watching this! Methodical work, very thorough and precise👏

@dailyhandsdiy

2 жыл бұрын

Thanks mate 😊 made my day.

Nice and easy Will change mine tomorrow👌👌

Loved everything accept how you ground it. Should have used your centre punch to middle it and then just drill the top one off and tap the bottom one through much cleaner

Great video, wished I'd seen this before I did mine!

@dailyhandsdiy

3 жыл бұрын

✌️😁

Nice and precise job ....one addition....should paint the damage area because corrosion will start.

@dailyhandsdiy

2 жыл бұрын

Yup could paint or spray rust protect.

Very good video

@dailyhandsdiy

Жыл бұрын

Thanks mate

I love it thanks for information

@dailyhandsdiy

4 жыл бұрын

welcome :D

@fayizct8039

3 жыл бұрын

Hello friend.. from where you bought ball joint. Im from malappuram

@dailyhandsdiy

3 жыл бұрын

Its from focuz parts mart bro. Or could buy from boodmo site. You can get genuine parts.

Bahaut accha mechanic

@dailyhandsdiy

3 жыл бұрын

thnks mate..

@sauravjha7479

3 жыл бұрын

@@dailyhandsdiy ap mechanic hai

@dailyhandsdiy

3 жыл бұрын

Part time mechanic hu brother.

Hi it's helpful I want to know about the size of the sockets I must use?

@dailyhandsdiy

2 жыл бұрын

Glad to hear from you mate. You need 13,14,16 and 18 mm sockets for the job.

Bro make more videos on Figo bro v love ur videos

@dailyhandsdiy

4 жыл бұрын

Sure bro i will and thank you for your kind support.... :)

@atobee2595

4 жыл бұрын

Agreed!

Neat job👍

@dailyhandsdiy

3 жыл бұрын

Thanks bro :D

@MrBaskr5

3 жыл бұрын

@@dailyhandsdiy should we change both ends at a same time?

@dailyhandsdiy

3 жыл бұрын

Depends normally driver side lasts longer than other because passenger side is more into potholes and road sides. Should check both sides, if loose enough, change it or if tight jst change one side.

Awesome bro following you closely

@dailyhandsdiy

4 жыл бұрын

Thnk you bro.. :)

@raaghulkumar7080

4 жыл бұрын

@@dailyhandsdiy bro upload more videos of ford figo bro I lack confidence in local mechanic they offen use to cheat

@raaghulkumar7080

4 жыл бұрын

@@dailyhandsdiy they did cheat me for poor pickup & black smoke they told me to replace egr valve instead of cleaning it

@dailyhandsdiy

4 жыл бұрын

So tru bro once i too had been told this but i serviced it myself. And got saved with no expense at all. And will do an egr srvcng soon. 'll keep updated.

@raaghulkumar7080

4 жыл бұрын

@@dailyhandsdiy awaiting bro keep rocking

Bro mer ek bal joint kharab aapne jese change Kiya h kardu koi alignment m problem to nhi aayegi

@dailyhandsdiy

Жыл бұрын

Proper fitment he to koi problem nei hoga.

Does anyone know if it's dangerous to drive a car with a bad ball joint? I use my car for work and I don't have enough money to buy the replacement and I'm a bit concerned

@dailyhandsdiy

3 жыл бұрын

Can't say its highly dangerous but will affect the drivablity at higher speeds and wear tire faster. If you are thinking about wheels coming off, don't worry that wont happen.

Bro i have also figo diesel 12 model.i have changed both side balancing rods only due to noise as said by mechanic.now am facing suspension sound when i drive car on high speeds and on speed breakers ,i feel sound ,not alot but half of times

@manjinderwahla8250

3 жыл бұрын

But when mechanic change balancing rods he said strus and all bushes are okkk .no noise from bushes

@dailyhandsdiy

3 жыл бұрын

Bro is that some kindof growlling sound.?

@manjinderwahla8250

3 жыл бұрын

@@dailyhandsdiy bro give ur contact number .i will send u video .if u can't give me number ,my contact number is 7355549394.whats app me

@dailyhandsdiy

3 жыл бұрын

sure bro i will msg asap.

Would garage rivet out I do rest myself ? No grinder tool

@dailyhandsdiy

2 ай бұрын

Yes you can

I managed to replace joints with suspension arm on car,also just ground top of rivets then punched out

@dailyhandsdiy

3 жыл бұрын

The knuckle n rotor was bothering me and don wanna break them so took the arm out.

If company has given rivets so is it so that whole control arm shall be changed?? Company should have given bolts already..I think in Maruti cars there r bolts only..thanks for this..pls make video for changing diesel filter also.. changing sensor in it n pumping diesel is difficult.. thanks

@dailyhandsdiy

4 жыл бұрын

the whole point is to replace the full assembly. And to give 3000 instead of 700 thats ol. And yes all other brand give it bolted. Bro i hav made a video on egr sticking. You can see the filter removal and replacing there....

@dailyhandsdiy

4 жыл бұрын

kzread.info/dash/bejne/gHt1s8StoNTNnZs.html

you're supposed to drill the rivets, increasing the drill bit size until it they get lose. No need for grinding, just hammer out the remaining rivets

@dailyhandsdiy

3 жыл бұрын

If its cold pressed rivet may work but hot pressed one, shank gets filled in all the gaps inside arm and joint. And plus if while drilling with crct shank dia bit, can drill the cntrol arm holes to larger ones or even diverted holes which is a bit risky for the car. And also the time and effort adds up. :)

I would even bother with drilling and grinding , for the sake of £20 get the complete wishbone 👍 save yourself the time . Good video 👍

@dailyhandsdiy

2 жыл бұрын

Yup taking time but here the price for complete arm is 5 times the price of ball joint.

@atobee2595

Жыл бұрын

@@dailyhandsdiy Exactly!

@aviationshchannel256

Жыл бұрын

@@dailyhandsdiy 5 times??? Ball joint costs around ₹600 and complete lower arm(OEM) costs nearly ₹9000 for my 2004 Hyundai Elantra. Pheww!!! So costly

@dailyhandsdiy

Жыл бұрын

Was specific about Ford. It costs 2.4k for lower arm and ball joint just 500. So 5 times 😅

@aviationshchannel256

Жыл бұрын

@@dailyhandsdiy I meant that full lower arm costs really more in few models, so it is better to change only joints and bushes as shown in video

How many bricks did he use to hold the car up?

@dailyhandsdiy

2 жыл бұрын

Its actually 4 😅

Good bro.

@yasirsalman88

4 жыл бұрын

Bro u shaked rotor up and down or left and ryt for ball joint

@dailyhandsdiy

4 жыл бұрын

Sry bro i din get u.... what exactly do you mean?

@yasirsalman88

4 жыл бұрын

@@dailyhandsdiy how did u find the fault of ball joint. After removing tyre how did u check the faulty rotor. Hope u understand my english. And sorry for my poor language

@dailyhandsdiy

4 жыл бұрын

Bro feel free...and yes its left and ryt. Move rotor left and ryt by watching the joints. And dont forget to put 2 lug nuts to secure the loose rotor

@yasirsalman88

4 жыл бұрын

@@dailyhandsdiy ok bro thanks

Where is your shop?

@dailyhandsdiy

2 жыл бұрын

Its in kerala