Hey RC, another video masterpiece! You must spend a lot of time getting all these different views and editing them out. The Lasernut seems like a great offroader, although the name is a little "unfortunate" though,lol.

@RCRoads

Ай бұрын

Thanks my good friend. As for my editing I do the best I can. I recently bought a new computer to replace my old one and it's called the "OMEN" should have been called bad omen. The video card must be the problem but it makes it hard to edit but I push hard to try and get my cuts but the lag is intolerable. As for my camera angles I usually go with 3 cameras and place them at different angles. I filled this with a DJI Action 2 on a selfie stick. Super cheap and small camera and it shoots 4k at a higher frame rate than my Go Pros. I will probably take more time on my next video. I think I will post shorts for a while and work on perfecting a video with a plot. I always rush my post to try and keep the channel going. Your kind words and complement drive me to do more. Have a great weekend and enjoy your killer 50cc epic RC. ✌👍

@RCWalletVacuum

Ай бұрын

@@RCRoads Yeah video really puts a strain on the GPU. I usually put a fan on my laptop when Davinci Resolve is doing its rendering. I'll be watching for your next masterpiece.

@RCRoads

Ай бұрын

@@RCWalletVacuum Indeed. I could get a new power supply for my old computer or perhaps move the video card over and pray. lol Davinci Resolve works good for me. Easy to navigate and has plenty of features that I have not explored yet.

Very nice buggy, I like the different camera point of views 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

@RCRoads

29 күн бұрын

Thanks. I'm really getting into the Lasernut. It's a new RC for me so I'm kind of babying it right now. It's not really a basher or that good for going off jumps but it sure can blast over a trial with it's tall tires.

Wow! As expected from the Pro-Line Trencher, the tires are really ballooning up nicely! It looks awesome!😁

@RCRoads

28 күн бұрын

Thanks for watching. I'm very inspired by your videos and I'm loving the U4. I'm testing out some Proline Super Swampers right now. They are 5.7" tires just like the original tires. I don't even think I'll drive my other cars much. As a matter of fact I should be getting a 2nd one delivered tomorrow. I would imaging for the price of $350 each they are probably older ones with diff issues but I have no idea. So far this one is holding up well. If one breaks I can still drive while I work on the other one.

That remains a very cool RC to see. Also very well filmed. 🆒🆒🎦👌👍Today I was playing outside in a park with my Losi Hamer Rey. Unfortunately it has rained so much here that there is a lot of mud. Played for an hour and spent two hours getting RC free of mud and clay. 🤣But even in the rain I still had some fun with an RC. Greetings Jos 👋🍀

@RCRoads

Ай бұрын

Thanks so much for the nice comment. The Losi Hamer Rey is a real nice rig. It must look awesome in the mud. I think by next winter there will be some water and mud in my area. Right now everything is drying up. I dread the thought of getting my new Lasernut dirty but that's what RC's are made for. Thanks again for visiting my channel. Enjoy the weekend. 🔨Rey

Awesome video man, love that RC. Great camera work as well 👍🏾

@RCRoads

28 күн бұрын

Thanks. I'm really enjoying the U4. I like it so much I bought a 2nd one. Just in case this one breaks.

great stuff ans very cool with the on board view

@RCRoads

Ай бұрын

Thanks for watching. I'm really enjoying the Lasernut and it's ability to get over the rough stuff. Super fun to drive.

Very nice 😀💪👍👋👋

@RCRoads

Ай бұрын

Thanks buddy. Always a pleasure to hear from you. 👍😁

Is it the offset from the tires, or are you running axl extenders? That's the only thing about the lasernut I didn't like and thought if it were only a bit wider, yours looks about right!

@RCRoads

27 күн бұрын

Thanks for the input. These tires came with enough offset to clear the hubs and they didn't need to be extended. The only issue I had was that the stock wheel hexes are relatively thin and the stock wheels have a real shallow hex slot for them to go into. The wheel hubs that came with these bead locks rubbed against the bearing and the movement so I solved that by adding thicker wheel hexes. I also picked up some 5.7" Proline Super Swampers and Impulse rims. They rubbed and I needed extenders. I'm working on a video now of the U4 Lasernut and it should be done soon. It would be nice to go wider or perhaps just go with some Trenchers or Badland tires as they are wider and not so tall. I just learning about the car and have always wanted one. I like this one so much I bought a black one. Now I'm broke and happy. They only cost me $350 each brand new so it's not really a super big investment. The guy sold 99 of them so I'm thinking they are older ones with diff issues but so far they are running fine on 3s.