Thanks a bunch! In my case a TSA agent accidentally dropped my mouse when searching through my backpack and all the buttons on the side of the mouse stopped working for me. After seeing your video I immediately got the suspicion that it was the white flat cable connecting the side to the main board getting loose and after disassembling, that was exactly the case. After reconnecting the cable, all my side-buttons work again :) If anyone's also in this position, just lift up the tiny white piece of plastic on the top of the cable socket, put the cable in and push down the plastic to tighten the connection again. This is a pretty standard flat-cable (or ribbon cable) socket mechanism, if you need to google that :)

ok this worked! but it def takes some adjusting. I used a tape that needed 3 layers for the left and I added 2 for the right. Still iffy, so I might test it and open it back up. but this made this less scary. I might use less textured tape next time I open it up. Thanks!

Awesome! Thanks for that tip about the tape

Thank you! This fixed my problem!

Thank you!!! Was going crazy thinking my drivers were malfunctioning. Used tape and it's more sensitive but fully works again without disengaging. Tried plastic at first but it held the button down too much and wouldn't disengage. Hopefully it lasts for a while it's not a cheap mouse!

Thanks for the video, I added a bit of scotch tape to the left click of my MX Master 3S and it works better now. Cheers!

@shramscar

5 ай бұрын

Haha, scotch tape makes a better world ))

All i added was a layer of Super glue as a added layer. when hardened its firm and no need to add piece of rubber.

I encountered the same issue with my mouse ( Logitech Logi MX Master 3) and attempted the same procedure multiple times without any positive results. Initially, I used only tape, but later I switched to a hard plastic surface-similar to the ones that come with batteries or USB cards. My hypothesis was that the button pressure needed to be flat and consistent across the entire surface. After clicking around 50 times, it still works well. Can't predict tomorrow, but this has been my positive experience. Thanks to this amazing video!

@shramscar

5 ай бұрын

Great! Thanks for sharing your experience on fixing it.

@arcadion448

2 ай бұрын

You are correct, it's not just tape. I used double sided tape, but kept the cover. Meaning I attached the adhesive side to the mouse undercarriage where the button would be pushed down. So when the button is pressed, the cover's harder plastic presses the mou-e's tiny button.

@IvoSotoMx

2 ай бұрын

@@arcadion448 BTW, I'm currently using my old Master 2 mouse because the repair on my other mouse has become unstable. Sometimes the click is audible and tactile, but other times it's so faint that it's barely noticeable, which is quite frustrating for someone who relies heavily on their mouse. Could you please provide more details about what you mean by "cover" in your fix? I added a small piece of hard plastic between the mouse case and the actual button, then glued it to the button area. I'll attempt another repair soon, so any new ideas are welcome!

@arcadion448

Ай бұрын

@@IvoSotoMx - it'd be easier to show a picture. But when I buy double sided tape - there's a hard plastic cover on one side and a stick side on the other. You remove the plastic, and it becomes double sided. Just don't remove the plastic and stick the tap on your mouse so that when you press it, the plastic will touch the sensor.

@IvoSotoMx

Ай бұрын

@@arcadion448 Will give it a try, thanks!

Thanks for this video. I'll apply same fix when I get home. Hopefully, it works. 👍🏾

thank you it worked

I have a similar issue. Specially for select and drag. Will give it a go as it was clearly explained and seems easy to do. Thanks for sharing 👍🏼

@TheRealStructurer

5 ай бұрын

Tried it and now works like new 👍🏻

@kas4u2

4 ай бұрын

@@TheRealStructurer Just to confirm ... you had Hold and press the left key was not registering long enough right?? Because I have the same problem and I want to try this method.....

@TheRealStructurer

4 ай бұрын

Yes @@kas4u2 thats correct. Now woking fine 👍

This worked for me! i used the tape as the video says but it was sticky and not responding well, i used doublesided tape and two pieces of plastic from a chapstick packaging and its been great!

your video saved my money. THANKS BRO!

Great vid very helpful bruh ⭐⭐⭐⭐⭐

thank you man it fixed my mouse for now ))

Thanks for this video! This left click has been bugging me for so many days and finally tried adding some padding to the left click. As food as new now. It's been just 1 month past warranty :(. It's bad this problem exists and for a mouse that's considered one of the best

@smrn

3 ай бұрын

Yes, faced the same issue with mine as well, only a few months past my warranty. Weird that so many people are facing this issue just after warranty is over. Logitech needs to make their hardware more durable, especially for such an expensive mouse.

Thanks! Unfortunately I had to break the front screw as I don't have a star adapter so small. But it works well now

@shramscar

5 ай бұрын

sorry for that screw - but hey - it works!

I just opened mine I didn't need to use a bit of extra cushion or anything it was stuck so I blew on the right button and it cleared the problem. What you need is an air blower cleaner for some mouse button stuck issues. Don't open the mouse sometimes just blow on the button and blow into it😮 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

Thank you sir mine is now fixed and mine is the MX Master 3S

@shramscar

5 ай бұрын

thanks for confirming that the same fix works for Master 3S. It's my next fix for that mouse too.

In my case it was enough to disassemble and clean the internals. But it's sad. This is a really great mouse for not to mention really expensive and I have not even had this for 2 years before issues begins. In comparison I also have a very cheap M180 from Logitech that have been working painlessly for more than a decade. I also have a friend with an MX Master 2 that needs to use Bluetooth because the wireless receiver just stopped working.

@cesarcorona7682

3 ай бұрын

THE SAME CASE, I FEEL YOU BRO¡¡¡ XD REAL

Just the fix i was looking for, my right click has died a little from playing LOL xD

@shramscar

5 ай бұрын

Game on!! Have fun.

What size is the torque bit?

@MansoorJawed

8 ай бұрын

A small phlip scrwdriver for the 4 holding the bottom half and a t5 torque holding the top half

Was this problem caused by use, or by a fall?

@shramscar

5 ай бұрын

Seems to be faulty design from Logi. And even worse that it exists in newer mouse version too.

@LucasCreativeTech

5 ай бұрын

@@shramscar my MX 3S requires me to double click to get a response. It happened a couple months before 1 year warranty end. I was gonna send it in but Logi website walked me through diagnosing, telling me that I should blow compressed air into it so I assumed it was just dirty and didnt sent it in.

You Russian ?

@shramscar

5 ай бұрын

No