GUYS!!! Please send me an email to siteng.community@gmail.com to get the spreadsheet back. I will be sending drawings there as well when they ready😊

@SITENG

7 ай бұрын

I am using BricsCAD now and is good and much cheaper@@rainsnownature7194

Yes, thank you very much. I successfully developed parameters for the transformation of Cassini to UTM Coordinates.

@SITENG

19 күн бұрын

Great to hear, All the best!

Wow, this is what I was looking for. Subscribed, good job bro.

@SITENG

20 күн бұрын

Thank you!

Thank you Greg for another great video ^^

@SITENG

2 жыл бұрын

Thanks Altynbek! Happy you like it 😊 👍👍

Great Work

This is amazing.the best advices I have seen web site. Nice and clearly .

@SITENG

Жыл бұрын

Thanks Jakub, happy you like it 👍👍

Hi Greg, amazing videos, thank you. I have subscribed and will be doing a lot of watching in the near future, as I have recently gotten back into site engineering and have a lot of refreshing to do and learning on updated technologies. Your efforts are greatly appreciated, and thank you so much for the offer of resources, I will be emailing for your spreadsheet shortly.

@SITENG

Жыл бұрын

Thanks!!! Always happy to help!

Hello Greg! I've discovered your channel and I 'm watching your videos from Greece! You are amazing! I 've subscribed to your channel and of I share a like 👍🏻to everyone of your videos that I've seen. Keep up the good job! We could make a great community here thanks to you! Greetings from the sunny Athens!😀🇬🇷

@SITENG

Жыл бұрын

Awesome! Thank you!

great video, thanks

@SITENG

2 жыл бұрын

Thank you Lidia! Glad you liked it 😊

Great Video 😊

@SITENG

2 жыл бұрын

Thanks! 😊

Nice informative

@SITENG

2 жыл бұрын

Thank you for a comment!

You are a great guy Gregg...Very kind

@SITENG

2 жыл бұрын

Thanks Henry! 😁

@henryojungu4807

2 жыл бұрын

@@SITENG.. Am so excited, that I have got a reply!... 🙏.. Blessings to you. You are very kind to share your valuable knowledge

@SITENG

2 жыл бұрын

Thanks Henry, there will bo more 😁 Thanks again for likes and comments as this helps to grow the channel 👍👍👍

@henryojungu4807

2 жыл бұрын

@@SITENG Very welcome Gregg

@SITENG

2 жыл бұрын

👍👍👍

Great

@SITENG

6 ай бұрын

👍👍

Great video☺️

@SITENG

2 жыл бұрын

Thank you!!😊

Hey Greg just used your spreadsheet to convert geodetic to a local for a potash mine job and it worked perfect and is quick and easy. I’ll be keeping your spreadsheet for the rest of my career. Thanks!!

@SITENG

2 жыл бұрын

Hi Chris! Happy to help 😁 working with local is great 👍👍 Still don't forget to keep checks 😁😁

@chrisnovak5161

2 жыл бұрын

@@SITENG Allways 👍👍

Thanks for your videos can you tell please about steel fix drawing which is in your iPad you carry with Explaining how to use the bars and set up and others this is something new just putting the job number and the rest you see in iPad thanks

@SITENG

Жыл бұрын

Hi! Please check my other videos about the rebar drawings, you should find there what you are looking for 😁

Hi Greg, nice videos. Quick question: I do not understand why you need to use a local grid. You're control points and and architect setting out drawing are in world coordinates. Why not just use world coordinates on site and use the align function to coordinate all your drawings to world coordinates. If you ever need to use gps to check something it will all be coordinated instead of wasting time transforming every drawing/asbuilt. Cheers

@SITENG

4 ай бұрын

this is very useful, especially when using TS06 instrument. I agree that for robotic instruments where you upload a drawing there is no need for it, although still might be useful.

Hi Greg ,You are amazing. Is it possible to get a spread sheet and drawing please.

@SITENG

4 ай бұрын

no problem, drop me an email on siteng.community@gmail.com don't have drawings yet as these I can't send, but once i have mine I will send as well

Hey Greg, just started studying setting out and watching your video, would you recommend me a book which I could learn in deep details the technical part o setting out?

@SITENG

2 жыл бұрын

Hi Matheus! Working on my book, but it'll take some time 😊 Hard to recommend any, send me your mail on siteng.community@gmail.com and if I find something you got it😁

Excellent video, simply and clear. Would like a copy of the spreadsheet please.

@SITENG

7 ай бұрын

Thanks! Drop me email to siteng.community@gmail.com please

@gatewayservices

6 ай бұрын

@@SITENG Hi, please can i get a copy of the spreadsheet?

Great video again, very helpful! Would you be able to attach the excel document in the description for my own use? Cheers

@SITENG

2 жыл бұрын

Thanks Sammy! Will be available on my LinkedIn later today 😊

@SITENG

2 жыл бұрын

Sammy, send the email to siteng.community@gmail.com will send you the sheet back 😊

@andybrookes5947

Жыл бұрын

Hi Greg, could I also get a copy of your spreadsheet too please ?

Hi everyone. I am very familiar with the setting out procedure on site when I have known control points to set up the station over. However, I have been giving the task of setting out a new extension to an existing building. The CAD drawing has the existing building with the extension present but no proper X,Y,Z co-ordinates on it. There is also no known control point anywhere on this site. Can someone please assist me on how I go about setting out this building?? Any help would be great

@SITENG

2 жыл бұрын

Hi! I would shoot the existing building and set a ref line a work with it, as it really will be your 'local system' where you will be using offset as x and length of line as y. Let me know if you need more explanation.👍👍👍

You should do one about setting up control points when there are no ground controls on or near site and the only controls n site are old surveyed in controls that you do not know how acurate thery are. To note that they are in inconvenient locations and only facing one side of the site. Traversing is not an option as all the roads have been replaced.

@SITENG

2 жыл бұрын

Hi Vlad! Not an easy one 😊 Dependant on situation, if there are some existing buildings, or nothing around to check that would be our decision still to do the job, as if we are start to use these we are responsible. Maybe GPS would help as well.

@yemosuper

2 жыл бұрын

Hi, there are some videos on you tube that explained this. check it out

@vladgyorgy9711

2 жыл бұрын

@@SITENG thanks, gps is ok for pile mat, but for capping beams I think it is a no go. Will call in a survey company to establish controls, as they have the time and gear( traverse kits, the right standers for the gps), plus they also provide the documentation and are responsible for doing a propper job.

@SITENG

2 жыл бұрын

Definitely go for it. You spend some money, but you'll have a peace of mind. That's actually their job to provide the info on which you can base later all the setting out and they should be happy to do it.

is not easy to use data extraction tool , and have a fixed SOP , for each corner of column , or at least 3 of them

@SITENG

2 жыл бұрын

I typically take a 1 corner for a column and I have 2 lines in stakeout this way, using E and N 😁 I did not use the way you mentioned so can't really say anything about it. Please explain more for community 👍👍

Just to ask why you dont do diploma for setting out for gold card as i can see yoi have the ability and yoi will help us to be get to the fields. Thanks

@SITENG

2 жыл бұрын

Hi Amer! I was thinking about these things and probably will do some ebook, or e-course which make you guys much better ready for construction than other courses (will be cheaper too) and will also get you ready to do a setting out exam with assessors, so you can get the 'paper' too :)

@amerali28

2 жыл бұрын

@@SITENG i think is about the time 😀 to start specially now winter is coming and we can prepare for next year with new start specially you have what you need for us to get the gold card 😉 and as you said it will be cheaper even better you can enrolled me from now and give me the discount for the first student:) 😉😀

@SITENG

2 жыл бұрын

Amer I will let you know when it's ready, but it will take some time 😊 discount is yours when ready 👍

If it is still available, I would like to acquire your transformation spreadsheet please.

@SITENG

4 ай бұрын

Drop me an email Siteng.community@gmail.com

Reference line eliminates any need for local ? if you have a complicated combination of grid systems or sometimes a radial grid reference line is far more efficient?

@SITENG

2 жыл бұрын

Not really, you can use it like local where your offset = easting and length = northing, but creating local grid is much better and makes your life much easier. You can work later in stakeout mode moving in E and N which is great.

@martinshaughnessy3622

2 жыл бұрын

I assume that people are using cad but thats not allways the case. You will often encounter grid systems where e.g. columns are at a tiny angle to the main grid or an apparently uniform grid but when you luck close there is a .001 deflection in one part. This is typical of certain designers who are trying to generate problems on site. In such cases reference line in global is more efficent but you would need cad to pull up the any globals required.

@SITENG

2 жыл бұрын

In theory we shouldn't use CAD for setting out at all, unless approved by designer. That's our role to keep checking and not trusting CAD too much 😉 In the case shown in my vid you couldn't even do a proper ref line (grid line) as information was so sh.... so I actually put the drawing to global myself. The thing is that local speed up the job then you are using stakeout which gives you 2 lines you need (I will show this when I get TS06) 😁

@martinshaughnessy3622

2 жыл бұрын

The days of the calculator and all those programmes are in the past. The idea that you cannot use cad is a joke? It’s been around now for decades and people are still wondering if they should/can use it. Your phone has a an app with cad(capacity) on it which can be used for all the necessary cad info. Have you ever seen an advert: setting out eng required with cad i guess in 20 years time they will be wondering if you can use Revit /BIM a local grid and a global are identical, the local being derived from the global. If you set out a wall using offset to a local it is not easier than setting it out from global and probably more error prone. The introduction of the local idea was in the days of cad being only available to a few in a privileged position and people selling software on calculators that is now obsolete. Local grid, calculators with programmes for local and paper print outs (often illegible) are a thing of the past. Most modern leicas have the capacity to up load a cad dxf and work from it directly. The first job i did setting out many years ago,where the engineer before me was fired and i had to replace him, had a .08 degree error in half the plot where the engineer missed the deflection which was very covertly displayed on an A3 almost illegible paper printout ( a typical Gallifordtry scenario) Not coincidentally Galliford ,collaborating with the designer, loved this as they wanted to bash the subcontractor. A designer who does not want you using cad is a bit like the hire company agency who would sell his mother at the crossroads to flog an instrument. He (the hire agency) does not want any one challenging his instruction to management who collaborate with him, on what they require on site. If they view you as a challenge to their selling op they will even sabotage instruments delivered on site. That is the type of (whitecollar)scum you will meet in construction.

@SITENG

2 жыл бұрын

Some companies don't even have CAD license so you can end up with pdf drawings and TS06, if you have your CAD go for it. On 99% of jobs you are not allowed use CAD in terms of setting out which means you should in theory use information provided on printed copy. You said you're finding some errors on CAD, well it doesn't matter as you should take info from pdf do a ref line and that's it :) Obviously everyone uses CAD if they have it.

Hello , that is great explanation. Is it possible to have the spread sheet for the conversion emailed to me please.

@SITENG

2 жыл бұрын

No problem Frank! Please send an e-mail to siteng.community@gmail.com 👍👍👍

Hi, would you be able to send me the excel spreadsheet?

@SITENG

2 жыл бұрын

Hi Tony! Just sent it, if you are the one who sent the email 😁😁

Hi Where I can download the spreadsheet ? Thank you

@SITENG

Жыл бұрын

write to me to: siteng.community@gmail.com

Hi is it possible to get a copy of the spreadsheet? thank you

@SITENG

2 жыл бұрын

No problem, just send me email to siteng.community@gmail.com

how to align more than three point reference

@SITENG

Жыл бұрын

Why would you need more than 3 points?

I am land surveyor please share this excel spread sheet

@SITENG

7 ай бұрын

drop me an email siteng.community@gmail.com

I am looking job I am sub engineer I have a 5 years experience site supervisor

@SITENG

2 жыл бұрын

Hi! You need to look for it, I don't even work myself now 😊

What's the point of the local grid, can't you just set out from the global coords?

@SITENG

2 жыл бұрын

This is game changer if you're using TS06, trust me 😁 If you use a robotic one I don't really see a need for it though.

Hi Greg,I sent you an email requesting the spreadsheet.Is it still available?

@SITENG

25 күн бұрын

I hope you have it now, this comment was not visible till now

can you please share the excel file

@SITENG

Ай бұрын

It’s on your email now 😀

Do you have the file

@SITENG

Жыл бұрын

what file? the spreasheet?

Please sir send it

@SITENG

7 ай бұрын

sent :) Just came back from work now :)

Plz share sheet

@SITENG

4 ай бұрын

Siteng.community@gmail.com Ill reply with sheet attached

Sir good afternoon sir i send you an email requesting for excel spread sheet for transformation of global coordinates to local coordinates

@SITENG

7 ай бұрын

Then it's with you already :)