Getting the loadstar wiring all finished up so that we can safely drive it out on the road. Then we take it into town for a lunch date!
Жүктеу.....
Пікірлер: 137
@walt10643 жыл бұрын
Now you need an old 9ft IH step-side bed. With cut and widened rear fenders.
@joeschlotthauer840
3 жыл бұрын
What year would that be from...
@joncable4045
3 жыл бұрын
Walter, do you know where one could find this? I have a 78 1700 I want to get one for.
@walt1064
3 жыл бұрын
I have not been on the recycling yard hunt in a while. But I think there was one between Rome and Cavesprings,GA the other day But I was the steering wheel holder and couldnt get the address
@kman-mi7su2 жыл бұрын
Nice! Now all you need is an RV trailer to pull with it. I wish I had it! I love old car and truck shows I'd pull an RV to a couple of shows during the summer and park it for the weekend and then show the truck in the show. Nicely done!
@tonyhernandez44263 жыл бұрын
Wow lodestar, first truck I ever drove back in 1979. what Memories! now I'm in a Cascadia. Oh, and the lodestar was a twin-stick brownie.
@schuckles2 жыл бұрын
I remember helping my dad with his old 1962 Loadstar with a 22000 gallon tank on the back. We used to call her Number 1 in a fleet of newer trucks. Due to insurance reasons, the vehicle became obsolete. However, on the property, we would us the truck to transport fuel oil and diesel (same thing, but got to keep it sep). My pops used to say "Fire in the HOLE!!!!!". I'd spray the carb with, essentially lighter fluid, and ole Number 1 would come to life.
@gingerauto
2 жыл бұрын
Such a cool memory to have with your dad! Its to bad that some states such as California are making it so we can’t use these cool old trucks anymore on the road.
@brendanstewart29833 жыл бұрын
Love this thing looks very nice. I am picking up a 49 international kB to build a rat rod. I will either be doing a dt360 or a 5.9 Cummins. I’m so excited
@michael-davidcarswell86673 жыл бұрын
Back in the 80's when I was in the Army we had these things and they were all diesel tractors that pulled a trailer known as a human cattle truck.
@CarWizard
2 жыл бұрын
Ive ridden in these "human cattle" trailers as a recruit in Basic. LOL
@michael-davidcarswell8667
2 жыл бұрын
@@CarWizard Brings back memories doesn't it?
@leopic5013 жыл бұрын
I have a 1600 loadstar with a 345 gas v8 1966 with only 41,000 miles on it hardly driven looking to increase the HP as much as I can get repaint inside and out and better a one owner truck my dad bought it new in 66 didn't have the heart to sell it when he died , so I guess I am restoring it , but only better then stock.
@CSXT8250
2 жыл бұрын
Try to leave the 345 alone. At least I would if it were mine. You see, the 345 was like a gasoline engine that was created to do everything a diesel would do for that time period. 1). Run at high load all day and night long repeatedly it's entire life. 2). Extremely durable. 3). Outstanding reliability. 4). Do so for hundreds of thousands of miles. That's asking a lot from any gasoline engine. International hit the ball out of the park. It did everything a medium duty diesel would do, but did it quietly! 3,500 rpm was a lot from these. They had excellent off idle torque just as a diesel does. Outstanding engine! You wanna go fast? (Why not !) Do this: source a complete running Big Block anything.. I.E. 455 Olds with TH400 trans, or 440 Mopar with 727 trans, 500 Caddy etc. Swap it in, go shred some tires! Just.... Not with a 345 IH. 😉
@nitram739 Жыл бұрын
This is so cool! Love them old binders!
@gingerauto
Жыл бұрын
Thanks man! They are a good looking truck!
@michaellange32483 жыл бұрын
We don't have these in Britain, but I've fallen in love with them after plating snowrunner on the xbox. Now I really want one.
@gingerauto
3 жыл бұрын
I’m sure you get import one! Might be a little pricey. But worth it 😉
@acd1202
2 жыл бұрын
Sorry to contradict you Michael but the International Loadstar was just about the only US truck which has ever sold in any numbers in the UK. They came over as CKD kits and where assembled locally both rigid (straight) and tractors from about 66 to 72. They were light and cheap so got a following, the largest user to my knowledge was Jack Bradley Transport of Accrington Lancashire who had about 60 of them (one of which is on the preserved circuit and does a few shows). They would have sold more if they'd had a decent engine but most if not all had a Perkins 6.354 112bhp, pretty useless in a two axle rigid, but in a tractor just ridiculous, but they were very light, very cheap to buy and parts were cheap, and that was enough for some to buy them.
@dizzydigger70833 жыл бұрын
Love the truck, just started working on my loadstar 1700
@gingerauto
3 жыл бұрын
What you have planned for the 1700?
@dizzydigger7083
3 жыл бұрын
@@gingerauto I’m currently putting a gravel box on it and going to use it to tow my smaller equipment around. Should be a bit of a head turner doing that. But after that, I think there will be upgrades each winter lol
@dustinpollard6237
3 жыл бұрын
I have a 68 1700 4x4 in Central PA. Just got some long awaited brake parts from a machinist buddy. Gotta install the drum shoe adjusters, order a $300 brake booster, and find some appropriate mirrors and its finally ready. It came rigged up as a single rear with a 90s Chevy 8 foot bed. I restored the dual wheels and built a 8 foot flatbed using 4x6 as the sideways wooden frame AND the deck boards!! I can't wait to get my lights on and see if it can go over 45mph with proper tires hahaha. Have fun and be safe gentlemen, love your truck!!
@greggreen66363 жыл бұрын
Sweet truck, id love have one
@davidsnow14813 жыл бұрын
Very cool truck. Love following the progress on the truck. Keep up the good work and stay safe out there.
@paulzale74293 жыл бұрын
Awesome Loadstar! I gotta get one!
@gingerauto
3 жыл бұрын
Do it!
@rudyreyes7199
3 жыл бұрын
I have a really nice one for cheap if your interested???????2k
@paulzale7429
3 жыл бұрын
@@rudyreyes7199 Would be Great, but just contracted , New Roof and Siding for House! But thanks for the consideration. Cheers!
@privilegednpc
2 жыл бұрын
@@rudyreyes7199 what state do you live in?
@rudyreyes7199
2 жыл бұрын
I live in California
@samsalavea27973 жыл бұрын
Man love your work brother and crew🤙🏾👊🏾so awesome guys.really want one one day aye.that will be a dream come true👌🏽
@Localtruthspeaker2 ай бұрын
The first truck I ever drove was one of these. It had the gas v8 with twin transmissions. Also a tandem axle with a 22’ potatoe box on it. Fully loaded it could only do 30 miles an hour lol. Beautiful rig. What brand of gauges did you guys use in this build? Can anyone tell me please?
@Nostradamus_Order333 жыл бұрын
Just bobtailing along. Looks good. You are just missing a fifth wheel. 😂
@stevenbrennon92842 жыл бұрын
Hello is that a Cummins engine you have in your truck mighty cool truck 🚛 very nice thanks for the post have a great week and take care.
@gingerauto
2 жыл бұрын
It is an international dt360. Still a 5.9 like the cummins. Just a lot beefier.
@stevenbrennon9284
2 жыл бұрын
@@gingerauto Hey thanks for the information and take care.
@joshuaburkey58412 жыл бұрын
Love this build!! Keep it up 👍 this has so much potential!!
@gingerauto
2 жыл бұрын
Thanks man! Hopefully can get going on it again once winter comes around.
@harleyhoracio13 жыл бұрын
Sweet rig! I have a 2000 International LPX 4700 T444E Low Profile. I’d like to do a cab swap with a 1965 Loadstar but unsure if it will work, I haven’t done all my due diligence. My trans is the AT542 and it’s about clapped out. Contemplating an MT 643 swap, (3rd & 4th lockup) but a few of the conversion items are extremely hard to find. Seems like all the schoolie conversion guys have snatched them up. Going with a manual trans might be easier, but again, I’m not sure what work well. My rear diff is 3.43 I think. Anyway, my grandfather had a truck rental business back in day ‘60’s through the ‘80’s in Fresno and he had probably close to 50 trucks all like this, that’s what’s driving my motivation to locate and purchase one and recreate his old truck rental color scheme.
@gingerauto
3 жыл бұрын
We stuck with a Manuel transmission just because we wanted it to have the old school big rig feel. One thing I have learned is you can make anything work with enough cutting and welding haha
@204GR2 жыл бұрын
You got me hooked on that thing and trying to look for one in my area but it’s not easy to find.
@gingerauto
2 жыл бұрын
They are getting harder to find. They are all old work trucks. So most of them have had a hard life.
@theidahomegarage80903 жыл бұрын
Tremec gear ratio calculator is awesome for those figures
@gingerauto
3 жыл бұрын
That is what we have been using! Has been very handy.
@chriswilson92482 жыл бұрын
Truck looks great
@gingerauto
2 жыл бұрын
Thank you
@adilsontec.875225 күн бұрын
sound good
@RJDCR3 жыл бұрын
kool truck RJ
@sebo1911Ай бұрын
I have a 68 with 304...no bed. Trying to get a ball park guess on curb weight as I'm tackling the brakes and have no ability to run her over the scales. Any guesses? Hoping to have something like yours before the good Lord tells me "You're done son!" 😅
@gingerauto
Ай бұрын
My guess without the bed is between 6-8k.
@Dev_Everything10 ай бұрын
So when you go to register this car, do you register it as a International Harvester? Do you have to have a class B to drive this?
@gingerauto
10 ай бұрын
It’s already registered. So we haven’t had to do anything. No we don’t need a class b.
@JohnSmith-qj4cf3 жыл бұрын
Mine i cut the fenders in half moved the in and mounted the body on to a c30 frame it looks great like me!!
@gingerauto
3 жыл бұрын
How much did you bring the fenders in?
@JohnSmith-qj4cf
3 жыл бұрын
@@gingerauto about half put the rim i was going to use 19.5 on back Measure to it looked right there one that I got the idear from on a site has a grain bin on the back looks like you could have 22
@Str8sixfan3 жыл бұрын
I know the journey is not over, but it has been a fun one to watch
@gingerauto
3 жыл бұрын
Still a long ways to go.
@abcdeedcba75573 жыл бұрын
Lmfao Oakdale Bud!
@garyburbank35373 жыл бұрын
Are you going with a 5th wheel semi look i have the same truck with a custom truck camper sleeper
@gingerauto
3 жыл бұрын
Yeah we are going with the medium size semi look.
@dustinpollard6237
3 жыл бұрын
I'm building the same on a 68 1700 4x4, do you have pics somewhere? I have a flatbed now, but I'm building something similar to "Full Send Alaskan Overland" aka Truck House Life and I'd like to know your regrets or other things you love or would change about your camper. I can leave my email address if you'd send me them to check out? It's my name but with ".t." in between @gmail.
@hillberry_revival3 жыл бұрын
This thing is so cool. Love you channel man, I'm glad to see someone who is interested in both Subarus and trucks like myself haha. What are your plans for the bed? It looks super cool without one honestly but I'm curious what you've got planned.
@gingerauto
3 жыл бұрын
We are just doing tin fenders over the tires. With a wood deck between the frame rail.
@rubennavegante34913 жыл бұрын
Thanks foe the video
@bigedsbeachsidegarage39683 жыл бұрын
That's awesome. Love that truck. So what was the RPM to speed on the highway ? I'm working on my IH 4700 Crew cab. Cummins engine swap.
@gingerauto
3 жыл бұрын
We were cruising at around 50mph at 2k rpm.
@VinceDorval Жыл бұрын
ohh man im so jealous can i have it to pull my camper with it haha
@gingerauto
Жыл бұрын
Only if it’s a vintage camper 😉
@RaisioWildout2 жыл бұрын
i love loadstars and fleetstars
@gingerauto
2 жыл бұрын
They have a cool body style!
@SaiKumar-wd4hj3 жыл бұрын
pretty cool 👌👌
@bernardoneumann86423 жыл бұрын
Parabéns, fazer isso com meu caminhão aqui no Brasil é um sonho !
@anthracitecoal8673 Жыл бұрын
Nice truck man. Was wondering how you have it registered and insured to be the most cost effective? Cheapest lol. Any advice will be greatly appreciated.. Dan
@gingerauto
Жыл бұрын
It’s just insured and registered as a ranch truck. Still just a gas engine 😉
@joncable40453 жыл бұрын
May I ask where you got the seats, and what are they out of?
@bustertim53333 жыл бұрын
Nice truck
@gingerauto
3 жыл бұрын
Thank you.
@Satatic3 жыл бұрын
haha looks like hes sweeping the floor while driving
@joeschlotthauer8403 жыл бұрын
Are there a lot of reproduction parts out there for these, such as window fuzzies, weatherstrips, or door seals... Just subscribed, I breathe this stuff...
@gingerauto
3 жыл бұрын
The little bit of research I have done you can still find a lot of stuff. But since we aren’t to the point of restoring the outside yet. I haven’t looked into it a whole lot yet.
@joeschlotthauer840
3 жыл бұрын
@@gingerauto I've wanted one for years, I'm going to do it. I just want to end up with an outrageous pickup truck...
@user-pz3dv2ui9f11 ай бұрын
What is the size of rims and tires
@davidrader48073 жыл бұрын
What is the wheelbase measurement, center to center hub
@mechanicojoe2 жыл бұрын
Hey, awesome truck. Do you have any idea what the curb weight is of your truck? Im interested in doing something similar but cant legally park it overnight in front of my house if its over 9900lbs. Seems like the IH 1600s and 1700s can be around 9k lbs or higher but finding an answer seems a little tricky.
@gingerauto
2 жыл бұрын
Someone who had a similar build said he was around 8500. We haven’t weighed ours yet.
@mechanicojoe
2 жыл бұрын
@@gingerauto No worries, thanks for the reply!
@K1L0-K1NG Жыл бұрын
Did you do a frame swap? If so what did you use?
@gingerauto
Жыл бұрын
Nope. Used stock frame
@vmaxes2 жыл бұрын
Cool truck, when will the shifter be changed?
@gingerauto
2 жыл бұрын
Probably never haha
@GeorgeCarlin883 жыл бұрын
it looks like a pug :D
@RonnieOhler3 ай бұрын
What front axle and rear axle did you use
@gingerauto
3 ай бұрын
They are off a 2004 f650
@weldthatiron36837 ай бұрын
Just cut the gear stick lol
@blackwolfjr19093 жыл бұрын
Okay I really like this truck athlete with me I have put some quarter fenders on it back with some short mud flaps the Chrome ones what set this thing off are you planning on painting the truck or not just out of curiosity love what you did with the fenders with the blinkers cuz I hate those stupid overrated I am so much Factory blinkers but you using there low Pros just sex the truck off Fender blinkers on the front phenomenal idea love it
@gingerauto
3 жыл бұрын
Thanks man. I am really happy with how the blinkers look. Yes we are planning on painting the truck eventually. But we get everything done. And then we will completely take it apart and paint. Still need to do the rear fenders and deck between the frame rails.
@oscarmora19242 жыл бұрын
I have a tractor like yours but its from gasoline it works and everything but I would want you to fix it like yours like around how much would it be and how can I comunicate with you ? Thank you
@gingerauto
2 жыл бұрын
The cost would really depend on what set up you do. You can message me on Instagram @ginger_auto.
@derrickcathey44102 жыл бұрын
What tire wheel size on the loadstar
@saratogaa602 жыл бұрын
What year is that international?
@gingerauto
2 жыл бұрын
71
@AntonioGarcia-qe5oy2 жыл бұрын
what size rims and tires? where did you purchase them from?
@gingerauto
2 жыл бұрын
24.5 wheels shaved down to a 24. With 285/40r24 tires. Purchased them from a place in LA. Think it was jk Motorsports if I remember correct.
@wbball153 жыл бұрын
Were you parked at the Stake Center before going home?
@gingerauto
3 жыл бұрын
Yes I was haha
@justinedwards60073 жыл бұрын
Idk if you guys have got your gear ratio figured out yet but I use this calculator to help. spicerparts.com/calculators/transmission-ratio-rpm-calculator
@gingerauto
3 жыл бұрын
This is the same calculator we have been using haha. We just never knew our rpm and speed till now. So now we can figure out which diff to get. Thanks tho!
@rickywoodcock72222 жыл бұрын
I need this truck
@charlesk86313 жыл бұрын
where did yall find you're rear diff? I'm trying to find 3:55s for mine lol
@gingerauto
3 жыл бұрын
Found ours on ebay
@gamareyna27403 жыл бұрын
What size tires?
@bbwlover39823 жыл бұрын
i want to build 1so bad but those cabs are hard to get
@gingerauto
3 жыл бұрын
They are hard to find in good condition. Start looking on the farms. And government auctions.
@robertrivera22543 жыл бұрын
How much did you pay for the rims nice truck
@gingerauto
3 жыл бұрын
3200 shipped to us
@baileymiller5463 жыл бұрын
Is it gonna be for sale eventually? 🙂
@gingerauto
3 жыл бұрын
Probably not haha
@baileymiller546
3 жыл бұрын
Dang it
@dragsbody2092 жыл бұрын
No issues registering it in CA?
@gingerauto
2 жыл бұрын
As far as they are concerned it’s still just a stock loadstar with a 302 engine.
@dragsbody209
2 жыл бұрын
@@gingerauto surprised they let it be registered and didn't ban you for it being a "commercial" vehicle. Looks like you're in Oakdale so not too far from me
@gingerauto
2 жыл бұрын
@@dragsbody209 it was already registered to us. So we just went in and renewed the registration. Yeah we are in oakdale.
@andrewscott31843 жыл бұрын
Looks like Oakdale Ca.
@gingerauto
3 жыл бұрын
Maybe it is 😉
@andrewscott3184
3 жыл бұрын
@@gingerauto allegedly allegedly..
@andrewscott3184
3 жыл бұрын
@@gingerauto I live outside motown, farm almonds. I'm currently putting a new 390 in my Fairlane also have a 65 F500 I'm working on next. I want to put on 22.5s and bags, that's how i found the channel getting some ideas. Loadstar is slick, nice job.
@andrewb97083 жыл бұрын
Is this in Oakdale, Ca?
@gingerauto
3 жыл бұрын
👍🏻
@alltrains21113 жыл бұрын
Cummins?
@gingerauto
3 жыл бұрын
Dt360
@kellyreynolds73854 ай бұрын
Cool truck stupid shift handle come on guys no taller then top of dash board
@gingerauto
4 ай бұрын
Haha is that the un written rule?
@kellyreynolds7385
4 ай бұрын
Drove semi for 41 years we made fun of those guys with big stupid shifters like that lmao 🤣
Пікірлер: 137
Now you need an old 9ft IH step-side bed. With cut and widened rear fenders.
@joeschlotthauer840
3 жыл бұрын
What year would that be from...
@joncable4045
3 жыл бұрын
Walter, do you know where one could find this? I have a 78 1700 I want to get one for.
@walt1064
3 жыл бұрын
I have not been on the recycling yard hunt in a while. But I think there was one between Rome and Cavesprings,GA the other day But I was the steering wheel holder and couldnt get the address
Nice! Now all you need is an RV trailer to pull with it. I wish I had it! I love old car and truck shows I'd pull an RV to a couple of shows during the summer and park it for the weekend and then show the truck in the show. Nicely done!
Wow lodestar, first truck I ever drove back in 1979. what Memories! now I'm in a Cascadia. Oh, and the lodestar was a twin-stick brownie.
I remember helping my dad with his old 1962 Loadstar with a 22000 gallon tank on the back. We used to call her Number 1 in a fleet of newer trucks. Due to insurance reasons, the vehicle became obsolete. However, on the property, we would us the truck to transport fuel oil and diesel (same thing, but got to keep it sep). My pops used to say "Fire in the HOLE!!!!!". I'd spray the carb with, essentially lighter fluid, and ole Number 1 would come to life.
@gingerauto
2 жыл бұрын
Such a cool memory to have with your dad! Its to bad that some states such as California are making it so we can’t use these cool old trucks anymore on the road.
Love this thing looks very nice. I am picking up a 49 international kB to build a rat rod. I will either be doing a dt360 or a 5.9 Cummins. I’m so excited
Back in the 80's when I was in the Army we had these things and they were all diesel tractors that pulled a trailer known as a human cattle truck.
@CarWizard
2 жыл бұрын
Ive ridden in these "human cattle" trailers as a recruit in Basic. LOL
@michael-davidcarswell8667
2 жыл бұрын
@@CarWizard Brings back memories doesn't it?
I have a 1600 loadstar with a 345 gas v8 1966 with only 41,000 miles on it hardly driven looking to increase the HP as much as I can get repaint inside and out and better a one owner truck my dad bought it new in 66 didn't have the heart to sell it when he died , so I guess I am restoring it , but only better then stock.
@CSXT8250
2 жыл бұрын
Try to leave the 345 alone. At least I would if it were mine. You see, the 345 was like a gasoline engine that was created to do everything a diesel would do for that time period. 1). Run at high load all day and night long repeatedly it's entire life. 2). Extremely durable. 3). Outstanding reliability. 4). Do so for hundreds of thousands of miles. That's asking a lot from any gasoline engine. International hit the ball out of the park. It did everything a medium duty diesel would do, but did it quietly! 3,500 rpm was a lot from these. They had excellent off idle torque just as a diesel does. Outstanding engine! You wanna go fast? (Why not !) Do this: source a complete running Big Block anything.. I.E. 455 Olds with TH400 trans, or 440 Mopar with 727 trans, 500 Caddy etc. Swap it in, go shred some tires! Just.... Not with a 345 IH. 😉
This is so cool! Love them old binders!
@gingerauto
Жыл бұрын
Thanks man! They are a good looking truck!
We don't have these in Britain, but I've fallen in love with them after plating snowrunner on the xbox. Now I really want one.
@gingerauto
3 жыл бұрын
I’m sure you get import one! Might be a little pricey. But worth it 😉
@acd1202
2 жыл бұрын
Sorry to contradict you Michael but the International Loadstar was just about the only US truck which has ever sold in any numbers in the UK. They came over as CKD kits and where assembled locally both rigid (straight) and tractors from about 66 to 72. They were light and cheap so got a following, the largest user to my knowledge was Jack Bradley Transport of Accrington Lancashire who had about 60 of them (one of which is on the preserved circuit and does a few shows). They would have sold more if they'd had a decent engine but most if not all had a Perkins 6.354 112bhp, pretty useless in a two axle rigid, but in a tractor just ridiculous, but they were very light, very cheap to buy and parts were cheap, and that was enough for some to buy them.
Love the truck, just started working on my loadstar 1700
@gingerauto
3 жыл бұрын
What you have planned for the 1700?
@dizzydigger7083
3 жыл бұрын
@@gingerauto I’m currently putting a gravel box on it and going to use it to tow my smaller equipment around. Should be a bit of a head turner doing that. But after that, I think there will be upgrades each winter lol
@dustinpollard6237
3 жыл бұрын
I have a 68 1700 4x4 in Central PA. Just got some long awaited brake parts from a machinist buddy. Gotta install the drum shoe adjusters, order a $300 brake booster, and find some appropriate mirrors and its finally ready. It came rigged up as a single rear with a 90s Chevy 8 foot bed. I restored the dual wheels and built a 8 foot flatbed using 4x6 as the sideways wooden frame AND the deck boards!! I can't wait to get my lights on and see if it can go over 45mph with proper tires hahaha. Have fun and be safe gentlemen, love your truck!!
Sweet truck, id love have one
Very cool truck. Love following the progress on the truck. Keep up the good work and stay safe out there.
Awesome Loadstar! I gotta get one!
@gingerauto
3 жыл бұрын
Do it!
@rudyreyes7199
3 жыл бұрын
I have a really nice one for cheap if your interested???????2k
@paulzale7429
3 жыл бұрын
@@rudyreyes7199 Would be Great, but just contracted , New Roof and Siding for House! But thanks for the consideration. Cheers!
@privilegednpc
2 жыл бұрын
@@rudyreyes7199 what state do you live in?
@rudyreyes7199
2 жыл бұрын
I live in California
Man love your work brother and crew🤙🏾👊🏾so awesome guys.really want one one day aye.that will be a dream come true👌🏽
The first truck I ever drove was one of these. It had the gas v8 with twin transmissions. Also a tandem axle with a 22’ potatoe box on it. Fully loaded it could only do 30 miles an hour lol. Beautiful rig. What brand of gauges did you guys use in this build? Can anyone tell me please?
Just bobtailing along. Looks good. You are just missing a fifth wheel. 😂
Hello is that a Cummins engine you have in your truck mighty cool truck 🚛 very nice thanks for the post have a great week and take care.
@gingerauto
2 жыл бұрын
It is an international dt360. Still a 5.9 like the cummins. Just a lot beefier.
@stevenbrennon9284
2 жыл бұрын
@@gingerauto Hey thanks for the information and take care.
Love this build!! Keep it up 👍 this has so much potential!!
@gingerauto
2 жыл бұрын
Thanks man! Hopefully can get going on it again once winter comes around.
Sweet rig! I have a 2000 International LPX 4700 T444E Low Profile. I’d like to do a cab swap with a 1965 Loadstar but unsure if it will work, I haven’t done all my due diligence. My trans is the AT542 and it’s about clapped out. Contemplating an MT 643 swap, (3rd & 4th lockup) but a few of the conversion items are extremely hard to find. Seems like all the schoolie conversion guys have snatched them up. Going with a manual trans might be easier, but again, I’m not sure what work well. My rear diff is 3.43 I think. Anyway, my grandfather had a truck rental business back in day ‘60’s through the ‘80’s in Fresno and he had probably close to 50 trucks all like this, that’s what’s driving my motivation to locate and purchase one and recreate his old truck rental color scheme.
@gingerauto
3 жыл бұрын
We stuck with a Manuel transmission just because we wanted it to have the old school big rig feel. One thing I have learned is you can make anything work with enough cutting and welding haha
You got me hooked on that thing and trying to look for one in my area but it’s not easy to find.
@gingerauto
2 жыл бұрын
They are getting harder to find. They are all old work trucks. So most of them have had a hard life.
Tremec gear ratio calculator is awesome for those figures
@gingerauto
3 жыл бұрын
That is what we have been using! Has been very handy.
Truck looks great
@gingerauto
2 жыл бұрын
Thank you
sound good
kool truck RJ
I have a 68 with 304...no bed. Trying to get a ball park guess on curb weight as I'm tackling the brakes and have no ability to run her over the scales. Any guesses? Hoping to have something like yours before the good Lord tells me "You're done son!" 😅
@gingerauto
Ай бұрын
My guess without the bed is between 6-8k.
So when you go to register this car, do you register it as a International Harvester? Do you have to have a class B to drive this?
@gingerauto
10 ай бұрын
It’s already registered. So we haven’t had to do anything. No we don’t need a class b.
Mine i cut the fenders in half moved the in and mounted the body on to a c30 frame it looks great like me!!
@gingerauto
3 жыл бұрын
How much did you bring the fenders in?
@JohnSmith-qj4cf
3 жыл бұрын
@@gingerauto about half put the rim i was going to use 19.5 on back Measure to it looked right there one that I got the idear from on a site has a grain bin on the back looks like you could have 22
I know the journey is not over, but it has been a fun one to watch
@gingerauto
3 жыл бұрын
Still a long ways to go.
Lmfao Oakdale Bud!
Are you going with a 5th wheel semi look i have the same truck with a custom truck camper sleeper
@gingerauto
3 жыл бұрын
Yeah we are going with the medium size semi look.
@dustinpollard6237
3 жыл бұрын
I'm building the same on a 68 1700 4x4, do you have pics somewhere? I have a flatbed now, but I'm building something similar to "Full Send Alaskan Overland" aka Truck House Life and I'd like to know your regrets or other things you love or would change about your camper. I can leave my email address if you'd send me them to check out? It's my name but with ".t." in between @gmail.
This thing is so cool. Love you channel man, I'm glad to see someone who is interested in both Subarus and trucks like myself haha. What are your plans for the bed? It looks super cool without one honestly but I'm curious what you've got planned.
@gingerauto
3 жыл бұрын
We are just doing tin fenders over the tires. With a wood deck between the frame rail.
Thanks foe the video
That's awesome. Love that truck. So what was the RPM to speed on the highway ? I'm working on my IH 4700 Crew cab. Cummins engine swap.
@gingerauto
3 жыл бұрын
We were cruising at around 50mph at 2k rpm.
ohh man im so jealous can i have it to pull my camper with it haha
@gingerauto
Жыл бұрын
Only if it’s a vintage camper 😉
i love loadstars and fleetstars
@gingerauto
2 жыл бұрын
They have a cool body style!
pretty cool 👌👌
Parabéns, fazer isso com meu caminhão aqui no Brasil é um sonho !
Nice truck man. Was wondering how you have it registered and insured to be the most cost effective? Cheapest lol. Any advice will be greatly appreciated.. Dan
@gingerauto
Жыл бұрын
It’s just insured and registered as a ranch truck. Still just a gas engine 😉
May I ask where you got the seats, and what are they out of?
Nice truck
@gingerauto
3 жыл бұрын
Thank you.
haha looks like hes sweeping the floor while driving
Are there a lot of reproduction parts out there for these, such as window fuzzies, weatherstrips, or door seals... Just subscribed, I breathe this stuff...
@gingerauto
3 жыл бұрын
The little bit of research I have done you can still find a lot of stuff. But since we aren’t to the point of restoring the outside yet. I haven’t looked into it a whole lot yet.
@joeschlotthauer840
3 жыл бұрын
@@gingerauto I've wanted one for years, I'm going to do it. I just want to end up with an outrageous pickup truck...
What is the size of rims and tires
What is the wheelbase measurement, center to center hub
Hey, awesome truck. Do you have any idea what the curb weight is of your truck? Im interested in doing something similar but cant legally park it overnight in front of my house if its over 9900lbs. Seems like the IH 1600s and 1700s can be around 9k lbs or higher but finding an answer seems a little tricky.
@gingerauto
2 жыл бұрын
Someone who had a similar build said he was around 8500. We haven’t weighed ours yet.
@mechanicojoe
2 жыл бұрын
@@gingerauto No worries, thanks for the reply!
Did you do a frame swap? If so what did you use?
@gingerauto
Жыл бұрын
Nope. Used stock frame
Cool truck, when will the shifter be changed?
@gingerauto
2 жыл бұрын
Probably never haha
it looks like a pug :D
What front axle and rear axle did you use
@gingerauto
3 ай бұрын
They are off a 2004 f650
Just cut the gear stick lol
Okay I really like this truck athlete with me I have put some quarter fenders on it back with some short mud flaps the Chrome ones what set this thing off are you planning on painting the truck or not just out of curiosity love what you did with the fenders with the blinkers cuz I hate those stupid overrated I am so much Factory blinkers but you using there low Pros just sex the truck off Fender blinkers on the front phenomenal idea love it
@gingerauto
3 жыл бұрын
Thanks man. I am really happy with how the blinkers look. Yes we are planning on painting the truck eventually. But we get everything done. And then we will completely take it apart and paint. Still need to do the rear fenders and deck between the frame rails.
I have a tractor like yours but its from gasoline it works and everything but I would want you to fix it like yours like around how much would it be and how can I comunicate with you ? Thank you
@gingerauto
2 жыл бұрын
The cost would really depend on what set up you do. You can message me on Instagram @ginger_auto.
What tire wheel size on the loadstar
What year is that international?
@gingerauto
2 жыл бұрын
71
what size rims and tires? where did you purchase them from?
@gingerauto
2 жыл бұрын
24.5 wheels shaved down to a 24. With 285/40r24 tires. Purchased them from a place in LA. Think it was jk Motorsports if I remember correct.
Were you parked at the Stake Center before going home?
@gingerauto
3 жыл бұрын
Yes I was haha
Idk if you guys have got your gear ratio figured out yet but I use this calculator to help. spicerparts.com/calculators/transmission-ratio-rpm-calculator
@gingerauto
3 жыл бұрын
This is the same calculator we have been using haha. We just never knew our rpm and speed till now. So now we can figure out which diff to get. Thanks tho!
I need this truck
where did yall find you're rear diff? I'm trying to find 3:55s for mine lol
@gingerauto
3 жыл бұрын
Found ours on ebay
What size tires?
i want to build 1so bad but those cabs are hard to get
@gingerauto
3 жыл бұрын
They are hard to find in good condition. Start looking on the farms. And government auctions.
How much did you pay for the rims nice truck
@gingerauto
3 жыл бұрын
3200 shipped to us
Is it gonna be for sale eventually? 🙂
@gingerauto
3 жыл бұрын
Probably not haha
@baileymiller546
3 жыл бұрын
Dang it
No issues registering it in CA?
@gingerauto
2 жыл бұрын
As far as they are concerned it’s still just a stock loadstar with a 302 engine.
@dragsbody209
2 жыл бұрын
@@gingerauto surprised they let it be registered and didn't ban you for it being a "commercial" vehicle. Looks like you're in Oakdale so not too far from me
@gingerauto
2 жыл бұрын
@@dragsbody209 it was already registered to us. So we just went in and renewed the registration. Yeah we are in oakdale.
Looks like Oakdale Ca.
@gingerauto
3 жыл бұрын
Maybe it is 😉
@andrewscott3184
3 жыл бұрын
@@gingerauto allegedly allegedly..
@andrewscott3184
3 жыл бұрын
@@gingerauto I live outside motown, farm almonds. I'm currently putting a new 390 in my Fairlane also have a 65 F500 I'm working on next. I want to put on 22.5s and bags, that's how i found the channel getting some ideas. Loadstar is slick, nice job.
Is this in Oakdale, Ca?
@gingerauto
3 жыл бұрын
👍🏻
Cummins?
@gingerauto
3 жыл бұрын
Dt360
Cool truck stupid shift handle come on guys no taller then top of dash board
@gingerauto
4 ай бұрын
Haha is that the un written rule?
@kellyreynolds7385
4 ай бұрын
Drove semi for 41 years we made fun of those guys with big stupid shifters like that lmao 🤣
Зарульем
cool truck, but those rims are awful
Se ve feo