Thank you for the video, I am new to Jetting, very interested in the drain invader X model. Keep up the good work. Love your videos and your company.

@JETTERSnorthwest

4 ай бұрын

Thanks! Indeed, the original DRAIN INVADER and the newer "X" model have really performed well for our customers!

Your videos are awesome I look forward to trying the Knucklehead soon. Thanks for the video

Learned more from you then any one else in the industry 👍🏼👍🏼👍🏼👍🏼👍🏼

@JETTERSnorthwest

2 жыл бұрын

Very kind of you to say! More videos on the way - Jz (sorry for the slow reply!)

Thank you for the informative video

Many thanks from UK

Great video!

Steve you is the bomb.

Steve I’m sold I’ll buy this product

Jetter for a lavatory basin?

can you recommend some Seattle plumbing companies that have your EQ

Thanks for the videos. What is the source of the water in this case? I am having a hard time imagining pulling a jetter hose through a house. Is that what most guys do?

@JETTERSnorthwest

3 жыл бұрын

There was one of our Electric-powered mini-Jetters on the floor near me, being fed water from the shower line. However, it is super common to bring a leader-hose thru the house from a larger jetter outside -- in fact a more and more techs are using a "clean hose" (that never sees a sewer) specifically for these applications to carry the high-pressure water from the jetter outside to the jetting-hose to be used inside

@righyan

3 жыл бұрын

@@JETTERSnorthwest what adapter did you use to get water from the shower line?

How would this drop head knuckle swivel perform in a washer drain trap?

@JETTERSnorthwest

6 жыл бұрын

As far as getting through the trap, the Knucklehead is the best I've tried. When the nozzle goes vertical and into the last sharp 90 the knuckles droop which helps it get through. May hang up on some, but I've not found a more consistent head to get through the tough turns

with a knucklehead and a dedicated hose used only for culinary lines, could you remove a kitchen tap and jet clean down through a galvanized water supply pipe found in older homes?

@JETTERSnorthwest

3 жыл бұрын

I'm not sure about the cross-connection liability, but if the nozzle will fit in the line then you could jet it. However, the nozzle/hose likely will not pass the sharp 90-degree elbows

Grease gun hose is what I prefer… cheap and works great!!!

@JETTERSnorthwest

Жыл бұрын

interesting - aren't those all short? What length have you found?

@bryanmontgomery4050

Жыл бұрын

48”

@nelsonbrum8496

4 ай бұрын

​@@bryanmontgomery4050Do you remove the anti-kink spring on the working end? Looks like it could be a restriction to making tight turns. I found a 60" hose on Amazon, but it has those springs on the ends.

What is the best way to maneuver a 90 degree angle that goes vertically into an rv tank? Thank you.

Any information on the jetter machine you used? Our company is getting many calls for jetting floor drains and our set up cannot get through a trap. What machine did you use to run your setup?

@JETTERSnorthwest

Жыл бұрын

Are you looking at the Drain Invader by chance? They are great for jetting residential p-traps.

I have a 1/4 hose, bought from Amazon, but the tip can not bend and go throught the 90 degree T 1-1/2 inch kitchen sink pipe. how can i redo the tip to make it easy the go throught?

@JETTERSnorthwest

2 жыл бұрын

1/4" might be too stiff for getting thru a 90-deg turn in 1.5", but here is a link to the best 1/4" nozzle for drop-tees & traps: shop.jettersnorthwest.com/collections/1-4-jetter-nozzles/products/1-4-drophead-nozzle-w-knuckle-leader-stainless-steel

Will it go through the toilet bowl? Thanks

@JETTERSnorthwest

Жыл бұрын

I've never tried that but I think it would. However, this is a small hose and small nozzle targeted to 3" and smaller lines (best application is 1.5" to 2") so even after getting thru a toilet-trap it's not ideal for cleaning the 4" sewer downstream of the toilet due to the lack of water-flow

I seriously think a portable quite high pressure hose ie with a decent sized tank and a jet trigger controlled nozzle which controlled the psi would be very useful. Where is one or can it be invented?

@JETTERSnorthwest

Ай бұрын

If you're asking for a quiet indoor jetting machine with automatic start-stop for "on-demand" jetting the simply click this link!: shop.jettersnorthwest.com/collections/drain-invaders/products/the-drain-invader-electric-sewer-jetter-2050-psi-1-4-gpm-2-in-1

Hey there, I run a plumbing channel here on KZread, Ive been a plumber for Sixteen years and really am interested in your jetter would you be interested in having me review one?

Where can I buy that power washer hose? Please share where I can buy it.

@JETTERSnorthwest

Жыл бұрын

Here ya go: shop.jettersnorthwest.com/collections/jetter-hose/products/3-16-bronze-flex-trap-hose Thanks!

I'm looking for that small nozzle, may i know online shop link to buy it? (I'm sorry for my bad language🙏🙏🙏)

@JETTERSnorthwest

2 жыл бұрын

No problem! 1/8": shop.jettersnorthwest.com/collections/1-8-jetter-nozzles/products/1-8-drophead-nozzle

@JETTERSnorthwest

2 жыл бұрын

1/4": shop.jettersnorthwest.com/collections/1-4-jetter-nozzles/products/1-4-drophead-nozzle-w-knuckle-leader-stainless-steel

@bakulgeblek6971

2 жыл бұрын

Thanks mister.. 🙏🙏

Can u jus tak apart the pipe under the sink ?? Less bends

@JETTERSnorthwest

2 жыл бұрын

Indeed, but I got the idea for this after I destroyed a sink-trap trying to get the union apart, so we did this to show that with the right tools you often can get thru to jet the sewer downstream without having to disassemble the trap ;-)

Where can I buy the knucklehead nozzle

@JETTERSnorthwest

Жыл бұрын

Here you go: 1/8" threads at shop.jettersnorthwest.com/collections/all-nozzles/products/1-8-drophead-nozzle or 1/4" threads at shop.jettersnorthwest.com/collections/all-nozzles/products/1-4-drophead-nozzle-w-knuckle-leader-stainless-steel THANKS!

Would this work for a urinal without taking it off the wall?

@JETTERSnorthwest

10 ай бұрын

Depends on the design of the urinal's flow path; we have customers that do get it thru a urinal's S-trap, but not other types that have the squared-off flow-path, or don't have a good entry-point

@brentcuaz7756

10 ай бұрын

@@JETTERSnorthwest Ya thx works the same with a standard urinal auger!

Would it be good for a urinal?

@JETTERSnorthwest

3 ай бұрын

Urinals are fickle as you know - it depends on the design. If the urinal/drain has a smooth/bending flow-path then the nozzle+hose can typically be worked thru the pipe's curves, but if the urinal has a blocky flow-path then the nozzle likely will hit a "road-block" and you'll have to pull it

Easy as drain jet nozzle in sewer? 6:06

@JETTERSnorthwest

Жыл бұрын

??

The link you shared no longer work. Then I realized that it is a 3 year old video. However, if any one found out where to buy the knucklehead nozzle please share so I can get one too. Thank yo

@righyan

3 жыл бұрын

@Hmoob Yajsab shop.jettersnorthwest.com/collections/1-8-jetter-nozzles/products/1-8-drophead-nozzle

God

Man , that’s like using a grenade to move a pebble. Using that inside provides certain risks, hose leaks and even line breaks. Does it work, you bet. I can clear a sink clog in under 5 minutes in nearly all cases. Your set up and break down would take longer.

@JETTERSnorthwest

2 жыл бұрын

Thanks for your reply - I hear you - but the message is more about jetting the sewer-line beyond the sink-trap, without having to take the time to disassemble the trap (PS - sorry for our slow reply!)

It literally takes less than 30 seconds to remove the trap with no tools.

@JETTERSnorthwest

Жыл бұрын

I hear you - but the video is really intended to show that the Nozzle and Hose can get through small P-traps -- especially Floor-Drains -- if it can get thru a small sink-trap then it'll get thru other P-traps. Also, many drain-cleaners don't want to disassemble old metal traps as they can fracture when you put the wrenching to them as you know. Sorry for the slow reply - thanks for commenting!

@emmanuelvillegas3431

Жыл бұрын

Your not that smart buddy. What about floor drain traps.

Thanks anyway but I could have a sink trap torn apart ,washed out and back together by the time you brought all that equipment in the house

@JETTERSnorthwest

2 жыл бұрын

Thanks for your reply - I hear you - but the message is more about jetting the sewer-line beyond the sink-trap, without having to take the time to disassemble the trap. The last time I disassembled an old metal trap it fell apart when i put wrenches to it, so this is a way to avoid adding to the problem while still cleaning the sewer, and cleaning the trap is a bonus

Found the Knuclehead jetter 89 dollars plus . I'll pass on it

@ronjclm8590

3 жыл бұрын

Yea...you should just call a plumber and save some money. LOLOLOLOLOL.

@juanmendoza2262

3 жыл бұрын

Use it once and it pays for it self…here that service costs 250.00.