best tutorials always, this one stumped me for a while. i should have known your explanation would click immediately.

@AussieMaillers

3 ай бұрын

Glad it worked for you. Hoping to start today and get some redo videos done and some new weaves....as long as the universe plays nice of course. Thanks for watching. ❤

❤i do appreciate your patience when repeating the steps

I love all your tutorials but I was struggling so hard with this. For anyone struggling- I have a LIFE CHANGING HACK! Use a knit/crochet swatch to hold your starter rings! Chainmaille jewelry workshop by Karen karon suggested this and it makes it SO EASY. Just stick each of the 4 starter rings into a hole of your crochet piece and tah dah no slipping around or moving. Then just build on those rings following Aussies tutorial!

@AussieMaillers

3 ай бұрын

Thanks for sharing!!

@lagatitabruja

3 ай бұрын

@@AussieMaillers thank you for all your great tutorials hands down my favorite chain Mail channel!

I am glad I found this tutorial. I have been having trouble getting this weave down using other methods. But yours is easy to see exactly what you are doing as you explain it.

@AussieMaillers

5 жыл бұрын

Fantastic Raevun, thanks for watching and letting me know. Deb

@raevunshadowstorm6373

5 жыл бұрын

@@AussieMaillers I put this method into use for the first time tonight and it worked for me perfectly!!! It made doing this weave so much easier. Thank you for all the tutorials you share!!! I love them!!!

When I first started chainmaille as a teen, this was my fave weave, and after I took a break for a few years, for some reason when I came back into it I could not get it for the life of me! But this video make me get it in an instant! Thank you so much for your help

Thank you. Seeing an action shot versus still photos makes it so much more understandable. Now I try for the fourth time☺️

@AussieMaillers

4 жыл бұрын

Good luck with it all. Deb

Very interesting to watch Deb - love those colour/ways and end results are stunning!

@AussieMaillers

4 жыл бұрын

Thanks so much 😊

Thank you soooooo much! It took me 3 days and several videos but you got thru to me. I am very grateful.

@AussieMaillers

4 жыл бұрын

Glad it helped!

Thank you, thank you . After watching your video and with numerous attempts, I finally am able to do half-Persian 4 in 1. I will now learn 3in 1. Thank you for your expertise.

@AussieMaillers

4 жыл бұрын

Fabulous news Rose...thanks for letting me know. Deb

Thanks Deb your a wonderful teacher. Thank you for sharing your knowledge

@AussieMaillers

3 жыл бұрын

Glad it was helpful!

I preferred your tutorial, you explained very well on how to weave and not very fast. Easy to follow and understand.thank you

@AussieMaillers

4 жыл бұрын

Glad it was helpful, thanks for watching. Deb

good explanation! thanks!

@AussieMaillers

6 жыл бұрын

Thanks! Deb

I love this weave, and I got it first time watching your video. Had to reverse it as I am left handed, but once you have the first couple of rings in they seem to just slip into the right place. Thanks for a great tutorial.

@AussieMaillers

5 жыл бұрын

Hi Sylvia, glad you got it to work for you. Being left handed makes mailling tricky for sure. Deb

Perfect I looked at this today...

Thank you, best tutorial on half persian 4 in 1👍😀

@AussieMaillers

5 жыл бұрын

Hi Mady, glad it helped you out. It can be tricky to start. Deb

@stinaandersson5640

5 жыл бұрын

@@AussieMaillers But you made it so it is easy to start to!!! I have tried this weave for a long time but i did not get until today! So: thank you 🥰👍😎

Hi Deb

Love the weave! Thank you. What size are the square rings you used in Chris bracelet, please

un saludo desde colombia

I love watching and learning chain maille from you. Thanks 😊 are the blue rings stainless steel?

Hello love it has been awhile....

What sizes does this work best in square? TIA

Hello Deb, Do you have somebody that have the right size mandrels for your projects? For a sample: 18G (1.0)x5.25mmID. I have the 18G (1.0mm)x 5.0 and 5.5. Soooo, Where do I get a 5.25mmID mandrel?

What are the particulars for the mans SS bracelet? Guage (swg please) and size (fractions?) I may be able to get my husband to wear something that I make?!?! Learning so much from your tutorials!!!! Thanks.

@AussieMaillers

5 жыл бұрын

Hi Bonnie, not sure what you mean by SS bracelet. I don't know what your husband prefers, but you can make it in 16SWG 5/16"ID or 18SWG 1/4"ID. Hope that helps. Deb

@bonnieevans1213

5 жыл бұрын

@@AussieMaillers I meant the stainless one that you showed. Would the sizes above work with the square stainless? Thanks!

@AussieMaillers

5 жыл бұрын

The square stainless, the rings were cut by someone else and they don't give out ring ID's. Without pulling it apart I don't know what they actually are as I have just respected their choice not to give them out. The 18SWG in square AA works, so it might work with the stainless but I couldn't be 100% sure. Deb

@bonnieevans1213

5 жыл бұрын

Thanks, Deb! You were very helpful!

Do you have kits to buy? I can't get on your sale page,also do you have a catalog ?

@AussieMaillers

Жыл бұрын

The link to our kit page is www.aussiemaille.com/kits-en/ For this weave, www.aussiemaille.com/half-persian-4in1-bracelet-kit-ba-complete-kit.html Hope that helps. Deb

what type of pliers are you using? Could let me know where to get them? Thank you :)

@AussieMaillers

2 ай бұрын

Those are the Lindstrom RX pliers, we used to sell them but they became difficult to get when COVID hit so we aren't stocking them right now. I am sure a google search will give you some great suggestions near you.

It took me a while to realise that picking up your work to admire it " hey, this is going well, looks great and not as hard as I thought" and putting it down without noting which was the working end, was not a good idea :) took me 15 minuted to work out why the heck a ring constantly turned up on the wrong side... ordered some similar pilers too, am fed up with bent chain nose cheapies.

@AussieMaillers

4 жыл бұрын

LOL, it does pay to lay the work down carefully with some weaves. It will get easier to recognise the working end/side as you go along. Deb

@aussiechris5904

4 жыл бұрын

@@AussieMaillers Deb, I have learned now, to just put a little clasp on the starting end, your tuts are great, thanks for your efforts.

I have always like this weave, I like to try it for a friend. Deb, what means the two A's when you said: 18g SWG AA. thank you.

@AussieMaillers

4 жыл бұрын

Hi Magda,, AA is Anodised Aluminium which are the coloured rings. HTH Deb

What is the K size

What is mmID?

I am a lefty and very thing is harder for me.

@AussieMaillers

4 жыл бұрын

Very true, but I've seen some very talented left handers. Keep at it. Deb

i have no idea why i struggled so much with this weave at first. it's infuriating when you can't pinpoint where it going wrong lmao. thank you for making it so simple to follow!!

the most difficult part is the hardest to follow. even stopping the video I cannot see how to start this on the third step. you go too fast repeat steps that don't need repeating and don't repeat the ones that do. I can see the pattern on the video. I just cannot see it when I try to do it