Liquid Cooled Meshroom S with 58mm Radiator! RTX4090 13700K Z790-I EK-Quantum Velocity² DDC 4.2 ITX
Ғылым және технология
Meshroom S Watercooling ITX SFF Build
How much radiator cooling power do you want for your SFF build?
Here are the parts that were installed here:
Meshroom S black
Intel Core i7-13700K
INNO3D GeForce RTX 4090 X3 OC
ASUS Z790-I
Kingston 32GB RAM DDR5 6000
Asus SFX-L Loki 1000W
EK-Quantum Velocity² DDC 4.2
4 x Noctua NF-A12x25 PWM chromax
EK Quantum Surface X240M (58mm!)
EK Quantum Surface S240 (30mm)
Alphacool ES Geforce RTX 4090 Reference Design with Backplate
EK-Quantum Flow Indicator D-RGB - Nickel
EK-CryoFuel Clear 1000mL
EK-Loop Leak Tester Flex
EK-Quantum Torque Plug w/Cover 10-Pack - Black
EK-Quantum Torque Rotary 90° - Black
EK-Loop D-RGB 3-Way Splitter Cable
EK-Quantum Torque Extender Static MF 28 - Black
EK-Quantum Torque Extender Static MF 7 - Black
EK-Quantum Torque Rotary 45° - Black
EK-Quantum Torque Micro Rotary 90° - Black
EK-Quantum Torque 6-Pack HDC 12 - Black
EK-Quantum Torque Drain Valve - Black
EK-Loop Metal Tube Cutting Tool
EK-Loop Metal Tube 12mm 0.8m Pre-Bent 90° - Nickel
EK-Quantum Torque Rotary Offset 7 - Black
EK-Quantum Torque Rotary Offset 14 - Black
Wera 05134000001 Kraftform Micro Big Pack
HAZET torque screwdriver
TK4900 Tool: www.ibstool.com/shop/
Пікірлер: 16
SSUPD makes an extension for the front panel so your fans aren't sticking out of the case.
I knew I was gonna like this from the thumbnail. Excellent build!
@RhinoTec
Жыл бұрын
Thanks mate!
My dude just casually has a water jet to cut out the mesh 😅
@Edward135i
6 ай бұрын
you could easily do a a half ass job of it with a pair of Aviation Snips.
Nice build bro.
@RhinoTec
Жыл бұрын
Thanks bro!
looks crazy !
@RhinoTec
Жыл бұрын
i know 😀
im trying to figure out how not to take a Corsair Case 2000D for a computer i'm going to make and found your very nice video. Im gona fight against temperature, and when you put the mesh on that water cutting device i was like "man ill never be able to do this " hahaha
Does the fans blow the hot air into the case? If so, have you tried flipping them and checking thermals? I would bet alot of the internal components would get a bit cooler. Super nice build though, looks awesome!
@RhinoTec
11 ай бұрын
Thanks for the comment, I had thought about flipping the fans too, but unfortunately you would be able to see the wires and fan connectors so it was easier to build. That's why I chose this case so that the warm air can at least escape a little.
@konradlindblad7860
11 ай бұрын
@@RhinoTec yeah it's a pity that they don't make fans that hide the uglyness of the back side of the fan. I guess you could make a custom fan grill that hides the cables/motor/brackets, but that's a bit more work. :)
Wait. If the display output from the GPU is on the bottom, does that mean it running output through the MB?
@catarinoneptune
6 ай бұрын
Angled adapters
daum, you should have went with slim rads 20mm and slim fans and d5 pump.... no external fans needed for 2x280mm