Thanks for the educational video! Appreciate you doing this. Also love your tools!

@rvtechpro

2 ай бұрын

Sweet!

Great video, I learned something new about the double square bits. I like these diagnostic videos👍🏻

@rvtechpro

6 ай бұрын

Glad to hear it!

Love Working on RV electrical White and purple Wires never ending .... and most of them are not marked or the label is gone great video and yes that is a real diagnostic... how often to you have to role Fridges to get the Ammonia flowing again ... that is easy money

@rvtechpro

6 ай бұрын

thanks for watching around here we take the camper down a bumpy road in an attempt to clear a small blockage in the cooling unit I will tell the customers to give it a try if it dose not work we can replace the cooling unit but if the refrigerator is really old I simply tell them they have gotten their moneys worth out of it and to just buy a new on versus dumping $2000 into an old one

I’ll never forget I came across one of these on a Jayco that was sold and going out later that day and I told my manager that they were excessive with the glue. He came out and went it can’t be that bad you must not be trying hard enough. And then I let him have my tools and try. After about 20 minutes of me laughing he proceeded to just rip it apart in pieces and say fuck this looks like the customer is getting new fascia and I’ll be calling Jayco.

@rvtechpro

6 ай бұрын

yup exactly right the brads are good enough thanks for chiming in on the video

With the problems consumers have with slides, it blows my mind that the trim and facia are not held on via magnets for ease of getting back behind the trim. 6-8 round magnets seated in the frame place a metal strip seated in the trim and now you can access anything you want without needing a single tool.

@rvtechpro

2 ай бұрын

thanks for watching

Great video! I'm considering a new 2024 Minnie Winnie with Power Gear Slim Rack for a bedroom slide or an Entegra Odyssey 26M with PowerGear model # 82S0140-00. How reliable are these compared to a Schwintek? I've read of many issues with Schwintek and am concerned about getting stuck in the middle of nowhere with a slide problem.

@rvtechpro

3 ай бұрын

I like the schwinteks they are good if built right its similar to the slim rack but I believe the slim rack has less issues Lippert owns both systems / companies can't go wrong with a through frame slide especially hydraulic

How you liking the dewalt brad? thinking about picking one up for the truck

@tannisdyer3504

6 ай бұрын

I love mine idk if you have the m12 line but they are releasing a compact brad nailer that looks awesome for tight spaces I’ll be picking up as well

@rvtechpro

6 ай бұрын

Ive had if for about 4 years its a good tool its just big and bulky they need to redesign it to be more compact

I can't get the motor out any tips???

@rvtechpro

2 ай бұрын

There is a retaining hex bolt or spring did you remove it

@seanwilkerson6454

2 ай бұрын

@@rvtechpro I didn't remove the screw all the way, just backed it out a bit. It needs to come all the way out?

@rvtechpro

2 ай бұрын

@@seanwilkerson6454 no just enough to release the bracket then place a screwdriver between the drive block and the bracket and pry up

@seanwilkerson6454

2 ай бұрын

@@rvtechpro I tried, I smashed a screw driver between but won't move up, at all.

@seanwilkerson6454

2 ай бұрын

Got it! Holy crap, was easy like the videos😆