*Update on using aftermarket axles* after changing my OEM axles for aftermarket axles I got bad vibrations and also had to replace 5 driver side cv axles as the boots kept ripping on me (thank you lifetime warranty). Sadly I did not keep my OEM axles so I had to go to the junkyard to get low-mile ones. If you do plan to lift your CRV even by 1 inch in the front KEEP YOUR OEM AXLES or find high quality aftermarket axles.

@fluffycat6489

Жыл бұрын

I had to change passenger side axle once after 2" front lift due to ripped boots but no other issue yet. Bought some ones off eBay been bout 5 months been okay, used aerogenics too. I've just got stock rims too not gonna worry about wheel spacers. Don't mind the look.

@WeekendSoftRoading

Жыл бұрын

@@fluffycat6489 Once my tread wears out im going to get larger tires.

@fluffycat6489

Жыл бұрын

@@WeekendSoftRoading yeah I will likely do the same as you with larger tyres but not wheel spacers if I can get away with it. My tyres are new so no rush For me.

@leonardomoreira2003

5 ай бұрын

Good work! I will lift the my 2006 CRV in 1.5 inches. However, I'm in Brazil and I have fear of side effects on the other suspension parts, because here in Brazil it is very difficult to find parts for this vehicle. Any other premature wear on the parts after installing the lift?

@WeekendSoftRoading

5 ай бұрын

@@leonardomoreira2003 Only axles so far, but also check your engine mounts and transmission mounts.

keep up the videos i enjoy them

@WeekendSoftRoading

Жыл бұрын

Thank you! Subscribe so you get notified of new videos!

Thumbs up. Awesome job.

@WeekendSoftRoading

Жыл бұрын

Thank you very much!

Thank you very much for the video and the training. looks great. I am trying to find the spacers in a European store but I am having a hard time finding them. I would like to lift my 2004 CRV. 1.5 inches in front and 1.5 inches behind. Keep uploading videos, it's appreciated.

@samimoring1235

2 жыл бұрын

check out ebay..I have a 04 too and there's different sizes of spacers you can get, 1,1.5,2.5 etc. I know cause I have them on my watchlist.

@constanmartos1617

2 жыл бұрын

@@samimoring1235 I got them on ebay 1.5 inches front and 1.2 inches rear. I just have to do the work. Thank you.

@WeekendSoftRoading

Жыл бұрын

Yeah, I got my 1.5 rear lift from Ebay.

Looks great, nice job! How about cornering? Is it stable, don't you fear it might tip over to the side due to the higher gravitation point?

@WeekendSoftRoading

Жыл бұрын

Very stable, then again its a small lift.

Looks really clean!!

@WeekendSoftRoading

Жыл бұрын

Thank you!

Some bigger tires would really improve the look and feel.

@WeekendSoftRoading

Жыл бұрын

I agree, I'm waiting on my tires to wear down, then ill get larger tires.

@applepoop10

10 ай бұрын

205/75/R15.

can you tell me a lil about the front led/halo lights? where did you get em? I personally like the led light bar, but I like the setup you got. what size is the roof rack cargo basket? 48"? I got a 04 crv and I'm wondering if the 64" is too big. thanx for you time!

@WeekendSoftRoading

2 жыл бұрын

Hi, Thanks for watching the video! The lights are Nilight flood LED lights from Amazon. The mount for them is a license plate bull mount from Amazon. Lastly the roof basket is Maxhaul from Amazon as well. So far all these items are holding up well, Ive had them on the car for about 2 years now.

@samimoring1235

2 жыл бұрын

@@WeekendSoftRoading I'm a ebayer but it looks like ill be viewing the amazon :) thanx again!

Did you do anything for camber? Like adjustable upper control arms or anything like that?

@WeekendSoftRoading

Ай бұрын

No, I did not do anything to the camber. Some how the lift made it straight.

Interesting. Never seen such things with CRV...

@WeekendSoftRoading

Жыл бұрын

Thanks, There is a huge community of Lifted CRV's doing "Jeep" things haha.

@mehmetnorkozli7919

Жыл бұрын

@@WeekendSoftRoading lasdik ebatları nedir ve eksoz susdurucusuna nasl bi işlem yapıldı normlde aşagida duruyo

So if I wanted to lift my crv 1.5 inches total up front and be level with the rear what size spacers would I need all around?

@WeekendSoftRoading

Жыл бұрын

HRG has a dedicated lift for 1.5 inches, go check them out. However, I wanted a rear rake (the rear is slightly higher than the front) so I went with a 1-inch lift in the front with Aerogenics (they are the only ones that I know of that make a 1-inch lift spacer) and a 1.5-inch lift spacer in the rear from eBay.

Would maybe look nice with chunky off road tyres ?

@WeekendSoftRoading

Жыл бұрын

Yeah, slightly bigger tires would look nice. I am currently running AT Geolanders

Здравствуйте, как вы увеличили клиренс ? Поставили проставки ?

@WeekendSoftRoading

10 ай бұрын

Да, я поставил распорный лифт-кит!