Just an FYI for anyone buying the 12xlt lift, it’s insanely heavy and you will need a picker/service truck or some other means of lifting the runways off the shipping brackets. I had four guys and we couldn’t lift it. The runway with the ram attached must weigh 1000 lbs.

Wow this thing is awesome.

Well I picked up my Lift King - this instructional video walked me through putting it together. I did notice there have been some additions since this was made - looks like a vent line from the hydraulic cylinder (not sure if this has to be routed to the opposite side of the supply line. Also the ends of the rod to disengage the locks were drilled and tapped, but the bolts for the connecting rods were of a different size that fit through (loosely) and were bolted with washers and nut. The lift is very solid, works well and would definitely recommend it. Price point is very reasonable.

@collectorcars

2 жыл бұрын

Hi Bear B8 , thanks for the purchase You are correct the vent line was added after this video , if you go to our videos and manuals page on the website there is an instruction for installing it , Thanks again !

Great detailed video!

How do you level this if there is a little slope in my garage? Can it still be left free standing?

Plan to get one next spring - question for you - once the vehicle is loaded, can you utilize the rollers to move the lift into position? My garage has only the one opening and would like to then be able to move the ramp to the side. Yes the video is well done.

@collectorcars

2 жыл бұрын

Yes , you would load your car , lift put on castors then lower back onto castors , move into place , lift and remove castors

@bearb888

2 жыл бұрын

@@collectorcars ty

What is the ramp height? Is it 4"?

@collectorcars

2 жыл бұрын

Yes it is