Thanks for being willing to film a mistake. It's fun to see how we creatives always find ways around them. I love the rescued box too!

@PeterWoodbineWoodturning

9 ай бұрын

Always making mistakes so its a good job there are ways to rescue a project. Thanks for the comment.

Good video. On deep boxes, anymore, I don't spend much time on the inside bottom. I just cut a piece of green felt and glue in place. Hides my mistakes better. Ha

Great video, I parrot the previous comments. Great instruction, I have made many boxes but I love your style. Also the bandsaw jig is a great help, I always dread changing the angle on my table. The boxes turned out beautiful! Thanks for sharing.

Hey Peter, watched 100s of box making vids, for the first time I'm going to grab a pen and paper and watch this again taking notes - so useful, thank you for you for sharing this. New subscriber!

@PeterWoodbineWoodturning

9 ай бұрын

Glad you find the video useful. Thanks for the comment.

Clever and creative! Can’t remember when I’ve stopped a turning video so many times to take a closer look at tools and technique. Thanks for the video, I’m one step closer to turning my first box.

@PeterWoodbineWoodturning

11 ай бұрын

Thank you very much for your comments. Glad you found the video useful.

Very nice boxes Peter and a superb redesign on both boxes. Cheers

@PeterWoodbineWoodturning

Жыл бұрын

Thanks for the comment Mike. Much appreciated.

Nice work. Nice save as well!

@PeterWoodbineWoodturning

Жыл бұрын

Thank you for your comment. Glad you liked the project.

Very nice I enjoyed watching you make those.

@PeterWoodbineWoodturning

Жыл бұрын

Glad you enjoyed the video. Thank you for the comment.

Great job...glad you were able to save the other box...I looked for the hollowing tools but was unable to find....Thanks again for sharing

@PeterWoodbineWoodturning

3 жыл бұрын

Hi Curtis, Glad you liked the video. Tool is a Hope hollowing tool. Search for Hopewoodturning.co.uk - click "tools and handles" - then "hollowing tools" and it is the first one at the top on the right. I got mine from Oliverswoodturning.co.uk as I have an account there. Thanks for the comment.

Absolutely Stunning pieces I love the rescue too i'm a new subscriber and will certainly be looking forward to your next video's I have the Hope 8mm hollower they really do eat the wood think I might have to get a 6mm one now

@PeterWoodbineWoodturning

Жыл бұрын

Thanks for the comment. Glad you enjoyed.

Thank you Peter, excellent Video, I’m off to have a go 👍🏻

@PeterWoodbineWoodturning

Жыл бұрын

Hi Mark, Thanks for the comment. Good luck with your box making.

Just came across your channel, nice work. Happy New Year from Thailand, John

@PeterWoodbineWoodturning

2 жыл бұрын

Thanks, you too!

Peter, nice boxes. I'm in the process of learning to make boxes. I especially like the relaxed presentation - no glaring music.

@PeterWoodbineWoodturning

3 жыл бұрын

Thanks Rick. Glad you enjoyed the video. Good luck with your box making.

Very nice boxes. I may have to borrow your 45 deg bandsaw jig, that looked really useful

@PeterWoodbineWoodturning

Жыл бұрын

The jig is quite useful and its really easy to make. Thanks for the comment.

Great looking boxes peter nicely done well worth 👍and sub, kind regards from will.

@PeterWoodbineWoodturning

11 ай бұрын

Thanks 👍

Looked like there were many box failures on that shelf. But that’s how us turners learn. Right?

Love those Lacer style boxes. When you say body filler, like Bondo? If so, great idea. Good luck with your channel, you got a new subscriber today 👌👍

@PeterWoodbineWoodturning

Жыл бұрын

Glad you liked the project. The filler is just basic wood filler from a diy store. Thanks for the comment and the sub.

Great video - thank you. What did you put inside your chuck to hold the box to finish it?

@imakrewitatl

7 ай бұрын

Looks like a waste block with a tenon

Красивая коробочка! Жалко, что первая не получилась, дерево очень красивое было! Beautiful box! It's a pity that the first one didn't work out, the tree was very beautiful!

@PeterWoodbineWoodturning

3 жыл бұрын

Большое спасибо

Thanks.Very nice demonstration. What did you use to get the decoration in the repair of the original box with the tear through? My assumption ( and that is all it is) would be filler on the inside and outside, then tooled smooth, then ??. Appreciate taping into your knowledge and experience!

@PeterWoodbineWoodturning

9 ай бұрын

Yes it was just basic wood filler. Thanks for your interest.

Lovely video - how did you get the boxes to turn in the closing scenes please?

@PeterWoodbineWoodturning

2 ай бұрын

Thank you for your comment. The boxes were individually filmed on a small mirrored turntable and then cut together in editing. Background was then added and boxes merged in front.

I liked the video and its definitely a good example but habving been turning wood for a year or so, i pretty much understand how to turn the shapes. The big challenges for lidded boxes seems ti be all the little details you skipped mentioning. For example, what are you doing to hold the base of the box while you finish the bottom? Looks like paper towel over something? The clamp marks always seem to show up. Thanks

@PeterWoodbineWoodturning

10 ай бұрын

The method of holding boxes is generally either by gripping a tenon, expanding into a recess, or by using a jam chuck. When finishing the base it was held on a jam chuck which was slightly too loose and was therefore made tighter by using a paper towel. If you watch my other lidded box video, it shows me forming jam chucks a couple of times. Thanks for the comment.

these boxes my friend what would they go for this year if I would sell them

@PeterWoodbineWoodturning

Жыл бұрын

Thanks for the comment.

Is it too much trouble to cut the corners off the blank?

@PeterWoodbineWoodturning

9 ай бұрын

Thank you for your inspiring comment. All useful observations appreciated.

I thought you need to cut uphill so you would have supported grain?

@PeterWoodbineWoodturning

Жыл бұрын

Extract from Woodworkers Journal - "In spindle turning, with the grain running parallel to the lathe bed, it is best to cut “downhill”. In other words, from large diameter to small. Trust this makes sense. Thanks for your query.

@mrjoeyman

Жыл бұрын

@@PeterWoodbineWoodturning And trust I do! Thank you sir.

ALL WOOD will expand and contract so if it happens to this box the lid might not come off.... just a thought

@hellqvistdesign8016

10 ай бұрын

Do you seriously think he doesn't know this? This is a text book example on how the lid should fit but nice try William.

@PeterWoodbineWoodturning

10 ай бұрын

Couldn't have put it better - Thanks.

@PeterWoodbineWoodturning

10 ай бұрын

Also just tried it 2 years later and still a perfect fit.

A Ring on a finger and a spinning lathe DO NOT GO WELL TOGETHER. Honey you can call me 9 and 1/2 now!

too fast and explanations slipped by

@PeterWoodbineWoodturning

Жыл бұрын

Sorry you didn't enjoy the video. Unfortunately as the saying goes - " You can't please all the people all the time. "