amazing,this channel deserves more followers👍

진짜 심신이 편안해지는 영상입니다. ㅎㅎ

퇴근길에 눈호강하고 갑니다 영상 빨려들어가네요 ㅎ

Beautifully done!

Production and music was just amazing. Well done on a near perfectly setup build

@SNAPSHOTREVIEW

5 ай бұрын

Oh! Thank you so much👍👍 I'm so glad you liked it 💜🖤

Awesome colors and build

I was curious about the P28, and it looks really awesome💯

오랜만에 올리셨네요 와~ 퀄 미쳤습니다 너무 잘봤어요 스냅샷님 영상보고 많이 영감얻습니다 감사합니다

@SNAPSHOTREVIEW

5 ай бұрын

안녕하세요! 과찬의 말씀이셔요 :) 자주 방문해 주셔서 정말 감사합니다.💜🖤

Sick build! You've used all the Lianli parts, impressive❤

@SNAPSHOTREVIEW

5 ай бұрын

Yeah, that's right~ I'm going to use Lian Li stuff frequently in the future 👍👍

top notch build

phaaaa this is clean , good job brothaaaaaaaa

I always gonna say that the first lianli unifans are the best ones

@SNAPSHOTREVIEW

5 күн бұрын

I absolutely agree! Also found the first version really innovative!

Well done. That GPU totally blend in

@SNAPSHOTREVIEW

5 ай бұрын

Oh, thank you so much!

Perfect 👍

@SNAPSHOTREVIEW

Ай бұрын

Thank you so much💜🖤

best mobo imo

영상 편안하게 잘 봣어요 퀄이 장난아니게 좋네요 외국형들이만든영상같아요 조만간 드래곤볼 예정인데 혹시 조립대행 이런것도 하시나요? 리안리 o11d rgb 이걸로 생각하고 있습니다

Amazing

@SNAPSHOTREVIEW

2 ай бұрын

💜🖤

영상 퀄리티가 탑급입니다.

@SNAPSHOTREVIEW

3 ай бұрын

와~ 감사합니다. 자주 놀러오세요 :)

Brother build it with the MSI Godlike max motherboard please sir do a video with that motherboard and ryzen 9 7950x3d

The little white sticker on top of the radiator is killing the beauty of this build 😢

@SNAPSHOTREVIEW

4 ай бұрын

lol~ you're right👍 Watching the video again, that's all I can see😀 Thanks for the comment bro💜🖤

Best song I've heard in along while nice build also. But why not keep the top on and also how is the temps when your using bottom and back as intake and side as exhaust?

@SNAPSHOTREVIEW

20 сағат бұрын

The pull configuration on a radiator seems optimal for this build. The bottom intake helps with GPU cooling and the two rear fans also are good enough. Switching the rear fans to intake and setting the others exhaust would not make a significant difference and it could be bad without dust filters. Hope this helps!

오랜만에 남겨요!!! 구동영상 없어서 아쉬워요!!!

@SNAPSHOTREVIEW

5 ай бұрын

안녕하세요! 댓글 감사드려요. 시네마틱 파트가 구동 영상이긴 한데요. 게임이나 실제 벤치 영상을 의미하시는 것 같네요. 꼭 참고하겠습니다💜🖤

what the name of music it made the whole build was relaxing and calming I enjoy

@SNAPSHOTREVIEW

3 ай бұрын

Please check!! Michael FK - Vacuum (build) DJ Taz Rashid - Full of Dreams (cinematic)

❤❤

@SNAPSHOTREVIEW

5 ай бұрын

💜🖤💜🖤

Thoughts on having a 240mm rad in the back as intake, bottom fans as intake, and the three side fans as exhaust?

@SNAPSHOTREVIEW

26 күн бұрын

More exhaust than intake and the bottom intake could be blocked by the GPU. However, if you've got a CPU suitable for a 240mm radiator, it's not that bad.

❤

@SNAPSHOTREVIEW

5 ай бұрын

💜🖤

The cover you add on min 4:16, was it included in the box?? Because I cant find it in mine :((

@SNAPSHOTREVIEW

3 ай бұрын

Nope! I contacted the local LianLi centre and received it separately.

스냅샷리뷰님! 얼마전 ASUS TUF GAMING B650 와 AMD 7950x 를 구매했는데 바이오스 셋팅에서 CPU voltage 가 24V가 나오더라구요. 보통 12V가 나오는 걸로 알고 있는데 24V면 메인보드 고장이라고 하더라구요. 맞나요?ㅋㅋ

@SNAPSHOTREVIEW

4 ай бұрын

안녕하세요! 바이오스에서 표기된 CPU Voltage는 일반적으로 1.0 ~ 1.3V 사이일텐데요. 혹시 1.24V를 잘못 보셨거나 바이오스에서 허수로 표시되는 느낌입니다. 일단 CPU와 GPU는 공통적으로 +12V를 사용하긴 하지만 Core 전압은 1.3.x V 이내입니다. 일단 최신 바이오스로 업데이트하시고, 다시 바이오스 진입해 보시고 확인하세요. 그리고 윈도우 설치 이후 HWINFO 설치 이후 윈도우 상에서 전압 확인도 필요해 보입니다.

How did you manage to get 2 fans on the rear exhaust? Is there an option bringing the Motherboard tray down?

@SNAPSHOTREVIEW

Ай бұрын

Yes! You can adjust the motherboard try level!

Hi how do you control the argb of the unifan p28? does the vision o11 have built-in UniHub? or should i buy it separately? Thanks

@SNAPSHOTREVIEW

2 ай бұрын

The P28 SIDE ARGB KIT comes with a +5V ARGB cable and a UNI HUB connection cable included. I connected it using the UNI HUB included with another UNI FAN for control.

지문이 안 남도록 라텍스 장갑 끼고 조립했다면 더 좋았을 것 같아요.

@SNAPSHOTREVIEW

2 ай бұрын

화면 전환이 많은 방식으로 영상 촬영하면서 빌드를 진행하기 때문에 장갑을 끼고 하기가 어려운 것 같아요 :) 좋은 의견 감사합니다.

Hi,Thanks for the movie. When can I see your new watch ?

@SNAPSHOTREVIEW

5 ай бұрын

My pleasure! If you send me an Apple Watch, I can do it right away, lol.💜🖤

@sifatmahmud.me10

5 ай бұрын

@@SNAPSHOTREVIEW 🤑

That’s a clean build … but is it a push pull ? if not cpu it’s hot cuz dude as the radiator fans blowing from the inside, fans should be on the other side or that position blowing into the radiator! There’s no air going through the radiator, just saying

@SNAPSHOTREVIEW

4 ай бұрын

Yo! Thank you so much👍 There's room for a bracket, push-pull setup is also possible, but I just went with intake pull. The 14700K draws 300W, hitting around 90°C, which is great cooling. Also, I picked an ARGB side kit for aesthetic purposes. Thanks for your information💜🖤

Which display is that on the graphic card? Can you show only system parameters or can this show gif too?

@SNAPSHOTREVIEW

3 ай бұрын

That's the LCD included in the RTX 4070 Ti Vulcan. It can display sensor values or GIFs.

So you did not use the fans come with the cooler and using 3 fans P28 instead?

@SNAPSHOTREVIEW

3 ай бұрын

Yes! I wanted to use the recently purchased P28, so I used it overall, including with the radiator.

@whateveryoucall7031

3 ай бұрын

@@SNAPSHOTREVIEW thank your the reply. I just order most of the parts. Your pc builds always look amazing. It took me a while to see where did you hide the cable from the screen Aio 😂

How many of the Lian Li fan controllers were used?

@SNAPSHOTREVIEW

5 күн бұрын

I only used one controller!

boss what if i put my 280mm rad at the back as exhaust?

@SNAPSHOTREVIEW

2 ай бұрын

The maximum size for the radiator at the rear is 240mm, so it's difficult. Sorry boss!

What is the small screen in the GPU? 😮

@SNAPSHOTREVIEW

3 ай бұрын

Oh! It's the LCD included by default in the graphics card. It's mostly included in VULCAN products.

Looks Awesome, but your ram iis in the wrong slots 👍

@SNAPSHOTREVIEW

18 күн бұрын

Thank you so much! A2 and B2 are commonly used as the standard, it's better cos they're away from the CPU than A1 and B1.

@skyarc6063

13 күн бұрын

2nd and 4th slots are fine.

Io avrei comprato delle ventole inverse per la base e il radiatore cosi da poter vedere l effetto luce su tutte, per il resto ok

@SNAPSHOTREVIEW

2 ай бұрын

Thanks a lot for your comment!

GPU temps are normal but them CPU temps are 🥵

Why no one build top specs in this cabinet

@SNAPSHOTREVIEW

5 күн бұрын

Cos we don't have enough money? The cooling is already sufficient!

p28 흡기가 소음이 심하다던데 괜찮나요

@SNAPSHOTREVIEW

4 ай бұрын

넵 녹투아 a12x25와 비교하면 높은 부하에서 흡기 소음은 제법있습니다. 라디 흡기는 최대 1700RPM, 하단 흡기는 최대 1350RPM 정도에 세팅했는데요. 실제 구동은 1000 ~ 1200 RPM 범위인데 저소음에 풍량이 진짜 좋더라구요~

제 질문에 답변 좀 해주세요 ㅋㅋ