Glad you guys are liking the TL LCD fans so far! We've already fixed the logo orientation issue via FW update and will be fixing other minor bugs shortly!

@Greasyman.

5 ай бұрын

Great looking fans. Well done, once again.

@Daedalus_UK

5 ай бұрын

Please keep being this interactive.

@D00m3dHitm4n

5 ай бұрын

The next evolution of this would be to add LEDs inside the fan blades themselves to turn the whole fan in a "screen" of sorts.

@FlamingPossumProd

5 ай бұрын

Is the tl120 compatible with the sl120s?

@twistedjiji

5 ай бұрын

Will there be a version of the TL that uses the Infinity mirror in the center/motor from the SL series in the future?

Honestly $50 a fan for that seems super reasonable. And since so many cases have the 2 or 3 fan combo down the side of the case where the fan hub is facing you, I can see those sensors being super useful. So I gotta say for these, I am for one.......a fan

@CursedPengiun

5 ай бұрын

I was thinking the same its only an extra $20 over the regular lian li fans. This is such a cool idea and id love to cop one and put it in the back exhaust on my y60.

@user-cd7gb1lc3j

3 ай бұрын

Great joke

@CursedPengiun

3 ай бұрын

​@user-cd7gb1lc3j what are you a lian li hater?

These are really cool imo, and if those prices hold true it's really a decent price for an enthusiast fan. I'd like to see Lian-Li work a little harder to improve interconnect with their previous gen fans, but if you're going to embrace RGB this is a great way to go about it.

@ericspecullaas2841

5 ай бұрын

I hope they are cool they are fans after all 😂😂😂😂😂

@yeejay6396

5 ай бұрын

​@@ericspecullaas2841that's actually a very good point. There was a time, not too far back, when lighta/Led fans emitted so much heat that it was pointless to have Led fans in chassis with the side panels on. It was nuts. And this was post DDR2 (iirc) , right around when DDR4 was hot sht.

@Ilikedagames-rf2fx

5 ай бұрын

@@yeejay6396 ?????????????????

@lilpain1997

5 ай бұрын

​@@yeejay6396 Was this in another universe??? I have never heard this being an issue

@yeejay6396

5 ай бұрын

​@@Ilikedagames-rf2fxMolex era... Fkn dawg poo. Also, because of Molex,, made for far less than pretty cable management waay back in the damn. And chassis back then., Holy fudge.

I have so many ideas for a build using those fans. IMO they're great for a different approach to having a sensor bar, with the right case and set up you could have a very interesting set up.

One more patent for Lian Li I bet lol. They are killing it with new fan-connection innovations

@FaySmash

5 ай бұрын

Corsair already has fans with screens...

@_catay_

5 ай бұрын

@@FaySmash they dont

@yeejay6396

5 ай бұрын

​Yeah... No... @@FaySmash

@Aleww

5 ай бұрын

Some mf gonna bite off them

@chosen1one930

5 ай бұрын

A screen that does absolutely nothing but makes the product cost a lot more. Just leave the screens off. Pass on all the worthless RGB that does absolutely nothing and now the screens. It's honestly insane that this has become normal. Smh

Glad to see more manufacturers doing reverse blade fans... No clue why it took them so long!

@miiasutherland852

5 ай бұрын

Omg. I know, right! I thought it was a no brainet once fans started becoming a bling thing. Haha

@paulgorden7622

5 ай бұрын

Not sure who started it, but the first one I saw was Cooler Master's reverse SickleFlow fan back in January 2021

@xXEPIKgamerXx

5 ай бұрын

TBF the reverse blades are sometime way less efficient, (which is generally great because modern cases have way more intake fans than exhuast and balance is key) but back then until we started putting all kinds of crazy effects on them, a plastic square looked like a plastic square from both sides. It didn't make much sense to have a reverse fan for such minor improvements whereas here the only reason and LCD fan can exist is probably because of reverse fans.

@goldenhate6649

3 ай бұрын

@@xXEPIKgamerXx To also be fair, "reverse" in this case is just flipping the cosmetics...I wish you could do this more often because some cases you have to have a 360 rad, and sometimes that can only go on the front panel... (wish I had gone 5800 x3d over intel 13th gen because of this, 13700k is a thirsty b****)

This is pretty neat, I'd definitely wait until they got the bugs worked out, but after that I might be interested in getting a set for my next build. Having 3 easy to see sensors, and not having to pull up Task Master or another application to see your temps is pretty neat.

@jocelyndaoust3700

5 ай бұрын

if you game you have msi afterburner or aomething similar its useless just a gimmick to sell to stupid people just like rgb

@FieryMeltman

5 ай бұрын

You can already do that with software. You can have your CPU and GPU usage and temps display on your taskbar.

@lareolanKFP

5 ай бұрын

@@FieryMeltman I know, but as you saw in the review, there are still some bugs with colors and the palette is pretty small for now. But it's most likely just a matter of time.

I personally really like these fans, but I also find it funny that companies are just finding an excuse to slap a screen on everything

Looks dope, price point will hurt though comparatively. That still won't stop me ordering them though lmao

@malvinchau2056

5 ай бұрын

150 for 3 lol

@D00ML0RD1

5 ай бұрын

​@@malvinchau2056 makes them cheaper then then corsairnlink fans that are 160 for a set of three have rgb coil wine when the rgb fully on and requirenyou to only use other cosair products becuase therenrgb software dosnt play nice ifnyou have other control softwarenactive on your pc

@Bmx2live2008

5 ай бұрын

@@malvinchau2056 eh I've got a kidney going spare

@POVwithRC

5 ай бұрын

​@@malvinchau2056Lian Li demands a premium for their premium products. Film at 11.

@joshconfer209

5 ай бұрын

​@@malvinchau2056chump change. I would be one of those lol.

I thought about following your build guide to put in a little screen on my PC, which also requires that I purchase Aida64. This is a much easier solution, and gives me pretty much exactly what I would have used that screen for.

At 4:30 and I can tell ya right now I LIKE these fans. A must have for my new build. Thanks for the review ....

I think these are awesome. Sensor info is what got me sold on them. Priced accordingly too considering what you're getting. I would love to see a Lian Li Vision with these bad boys.

This is a cool concept, especially for someone like myself who likes the screens to display data. I agree though I’m not the biggest fan of the infinity mirrors on the side, I would like to see them come out with an “SL” style. Also like someone else mentioned, it would only be ideal for fans that you can see clearly - there’s always the desire for uniformity but having fans with screens that are not even visible to you would be a bit of a waste of money. Still, I’m glad these are out and am excited to see what they come out with in the inevitable V2

@bluephreakr

5 ай бұрын

What else do you want Lian Li to do with the sides of the fan? An LED matrix display? That'd be nice for some top-mounted fans to show a graph or write silly messages on, but I wouldn't imagine they could combine this with LED fans in a way which is practical except for people who do the standing desk thing every so often.

@xenodraken377

5 ай бұрын

I agree, this is pretty much useless, unless on the back panel vent or on the rear exhaust. most cases have a mesh front end that will distort the view. Do you have to buy double of these for push pull rad cooling? are any of the earlier models the same flow spec? they need a non lcd version too. something you could mix and match. 3 fans one could have the lcd and still work with a non lcd version for example. They look well made , and nice to look at even with the lcd off. I pretty much only use lian-li fans because they last.

@bluephreakr

5 ай бұрын

@@xenodraken377 This was made to go with their O11 Dynamic, _guaranteed._ The game plan for these is to have the fans at the side intake. _That's it._ And maybe one in the rear panel. But _that's it_ for practical application.

I really love seeing Lian Li continue to innovate with their products. Now how about a QI charger in one of the 011 case variants like Be Quiet has done with the Dark Base Pro 901? I will almost certainly be picking up a 3 pack of these, though to go into my computer. Love the gages on the fan hubs idea.

@UnsettlingNarrations

5 ай бұрын

Putting pointless screens on stuff is innovation?

@DroopyPenguin95

5 ай бұрын

​@@UnsettlingNarrations It's definitely more innovation that whatever everyone else is doing. Lian Li now has the right momentum, so I'm sure we'll see other things soon :)

@arabiancandybar

5 ай бұрын

​@@DroopyPenguin95 Lian Li doesn't have any momentum. That's why they gotta start all those lawsuits. They're scared.

@dannyking4138

5 ай бұрын

They have one of the best selling cases and there fans are some of the best selling wtf you on about @@arabiancandybar

The outro was awesome! I have really liked my Lian Li fans. I've only had one out of 9, over the past 3 or 4 years, that started making a squealing sound and they replaced it without question. If I were building a new system these would definitely be one of my options.

I like it. I might get one to use as a rear exhaust in my Fractal Torrent. Currently the only exhaust is the power supply fan in the top of the case.

these are pretty cool IMO, the sensors make sense to if you dont want to add a separate sensor panel. I saw it on Lian Li's IG account, they had a continuous video of Ryu doing his hadouken going through all the screens (wondering how they synced that). thanks for another great video, honestly, i'd buy this and mount it vertically on the back of the NV9

Its 100% a super over priced gimmicky thing but its awesome! I love the flashy bells and whistles because you can truly customize your build to reflect your tastes. Lian Li continues to show innovation and I suspect all their product lines will improve year over year. For the first gen i think they hit a home run here. Screens and panels are going to trend for a long time as we hunger for information. You had me belly laughing with the crew vids on the screens! Great video!

@MaavBR

5 ай бұрын

Besides, they should 100% release another pair of models that's exactly the same except with a normal hub for maybe $10 less a fan. In my O11D, for example, I don't really care enough to have a screen on my bottom intake/top exhaust, but the side intake having screens on the hubs make for a super cool sensor panel

@RogueWraith909

5 ай бұрын

@@MaavBR They have... The TL fans are these but without the LCD, and they actually have better performance too (almost P28 levels if their website is to be believed). They've also made them in 120mm and 140mm and both sizes have reverse flow options... they've gone all in on these (the TL LCD's iirc have less performance, alot less... might be a voltage and current issue due to having the screens on them).

That is sweet looking!! Lian Li definitely makes the best looking fans on the market right now imo. I recently built arguably the best looking PC I've ever put together, filled to the brim with SL-Infinity 120 fans. Gonna have to sell it off and re-build after a move across the pond later this year, I might just pick some of these up for the updated build. Can't wait to put some animated logos in there! Super cool way to display temps and component usage too.

I really enjoy your content and it is well done. I like the advances in the tech of the entire design. Installed with taste in mind I'm saying it is a nice addition.

they are available in 120mm and 140mm, nice! I think companies should do more 140mm fans now for cases and radiators.

@goldenhate6649

3 ай бұрын

God, trying to find 140 cases is a nightmare. But then you wouldn't be buying as many fans (considering 140 tends to be better per dollar)

While this is a sick idea, the only fan you really will see is the single exhaust fan. Maybe this would be cool in a lian li case with the fans next to the motherboard, but what I think the coolest item to have this set up is the GPU fans. Imagine having this with a vertically mounted GPU. Would absolutely make the set up look super sick and you can clearly see it as its the closest item to the tempered glass.

@grantberardi5080

5 ай бұрын

That was my thought exactly. While watching this video I kept looking at my rig that has a vertical 3080 and thought how cool it would be with screens on my gpu fan hubs.

@ChoppyChof

5 ай бұрын

I guess if you have one of the newer style cases, like a hyte y60 for example, these would work really well. But yeah, for a conventional case at least, not so great.

@Nite-Lite-Gamers

5 ай бұрын

Agreed, Looking at my case also, "Lian LI Lancool 2 Mesh", the exhaust fan is the only one you would see. I also think, fans is now getting to the point were the price is getting to high. A fan is there for one job, to move air not to watch repeats of friends.

@fortunefed8719

5 ай бұрын

I'm sure they had the 011 Dynamic in mind when they designed these fans. You'd have 3 fans facing you on the front of the case.

@AccordGG1

5 ай бұрын

while i agree with you for most cases, people have to remember not every product is intended for every consumer. if you only have an exhaust fan facing you, you are not their target. also another thing to keep in mind is that they made the fans next to the mobo popular with their O11 case and now almost every new case is like that.

I love my Lian Li SL 120 INF fans and im glad the kid at microcenter steered me in this direction over corsair fans that I was deadset on. This was a couple years ago. They are amazing. I dont know if Id have a need for LCD screens though but they look cool and im sure theyre of good quality!

I think this is a great idea. Having screens to display different info is very useful. Not to mention that you have tons of options when you get bored with your current display. And the lighting effects are just pretty. I'd say it's worth the price.

as a lian li user i can appreciate their effort. everyone seems to hate their L connect 3 software though. personaly i find it to be great.

@rhomba9364

5 ай бұрын

It would be if you actually got any help from their support with the bugs in the software. I get an error messeage every time i turn the system on, and the fans barely spin until i cklick ok. If it doesn't show and i forget it, my system melts... It needs a restart to show up many times. Terrible.

I think it's something very good, I really wanted an LCD screen to see the CPU temperature. The simplest option until now was to buy an aio, which costs at least $200. It's expensive considering the fact that most of them already have one, if what I'm saying makes sense. So a screen for $45 or something like that is welcome. It's great that they also have a version with normal blades.

@Booth73

5 ай бұрын

Corsair nexus. Idk if they are still on sale but it's a really nice touch panel that let's u see all ur temps plus u can do a ton of other stuff with it. I paid $50 for mine but msrp is like $100 but again it may still be on sale.

@lilpain1997

5 ай бұрын

Why not just buy a small screen and hook it up inside the case???

@ElRabito

5 ай бұрын

Not to mention Aio suck. Especially corsair trash....

@lilpain1997

5 ай бұрын

@@ElRabito this isn't even remotely true.

@ElRabito

5 ай бұрын

@@lilpain1997 it is. Plenty of videos out there. Just buy a noctua fan, will outlast any Aio by 5 years....

thanks for your review

They’re insane!! I have the first SL fans and I like them. Would be nice to see the SL fans with the screen. Would be a nice upgrade. And considering what you get, the price isn’t bad. Have to see what they charge up here in Canada.

The best part of these is the reverse blades! I’ve been dying for this for years now. That alone, is enough to make me buy them.

@taimoorshah8230

5 ай бұрын

enough companies are making reverse fans for at least a year now. maybe you haven't discovered them.

@ragetist

5 ай бұрын

You can get reverse blades for cheap, I can't find a way to justify buying overpriced case fans when they run at low RPM anyway.

@denzel8218gaming

5 ай бұрын

Most of the reverse blades ive seen so far are prtty much all 120 atleast any with rgb not many good options in the 140s...unless u guys can point me in the right direction

@taimoorshah8230

5 ай бұрын

@@denzel8218gaming thermaltake started the reverse fan trend last year, soon after Corsair followed i think, just google reverse fan 120 or 140 and you'll find many fans worth checking out.

@xXEPIKgamerXx

5 ай бұрын

Its not just that they are reverse blade, it also that their Uni-lock, come in multiple sizes, ergonomic, amazing visually, easy to use, and the specs compete 1:1 if not out perform cheap basic fans in some areas. Even then if you want to have your cake and eat it too, the Performance TLs that also just released have far better Airflow/pressure, but still have all the bells and whistles other than having a basic and uninteresting fanhub.

One style of fan I would love to see incorporated into the case fan world is the Dyson blade-less fans. That would really change the market due to them not needing to be square. Also they have a very minimalistic look and would look super cool with a thin LED ring around the rim of the surround 🙂

@clifflenoir4323

5 ай бұрын

Sadly those Dyson fans have a regular fan in the base: they just have no blades at the top where the air comes out and the ring of air pulls additional air along with it. This is why they are called air multipliers, since a lower fan speed can pull more air through, thus multiplying the efficiency. In a PC case, you would still need a bladed fan somewhere and the meshes and dust filters would completely stop the air multipier effect from working 😕

WOW! Those are amazing!!!

I think you said it best at 1:50... Those look "fan"-tastic. (surprised we didn't get a chuckle from Phil in the background for that) I'm a fan of having lots of screens, but I also prefer stealth aesthetics over fancy RGB.

Good on Lian Li for continuously innovating and doing things differently!

I honestly really love this idea. Why have one singular sensor panel when you can have several tiny sensor panels that require no additional wiring. The price is honestly not that bad when you consider that the Corsair connect fans 3 pack cost the exact same amount and have 0 screens. Also Jay I really hope you have a video coming covering the new purpose built sensor panel that Phanteks just announced! I think it's a bit overpriced for what it is but still wanna see it in action regardless.

Very Cool! I'll be purchasing some when available.

I love them. Need to get these for my new build next year for sure.

My question is - could you chain two normal infinity fans and one LCD fan together and have the same loop effect? Cause I could see that as somewhat mitigation of the price. Also, I hope more and more companies will start doing reverse blades.

@Mapantz1

5 ай бұрын

No. No other fans can be connected to the LCD fans. Not even the new non-LCD TL version.

@YouSoundButtHurt

5 ай бұрын

You should be able to, I don't see why not, the software can ID each type and sync them.

@Mapantz1

5 ай бұрын

@@YouSoundButtHurt Why should you? The signal going through the connectors is different. Lian Li have explicitly said this.

@xXEPIKgamerXx

5 ай бұрын

SL Fans and TL fans cannot use the same connectors or hubs, and the TL LCD fans cannot be daisy chained with the Performance TLs because of how much more power and date they need, so for now LCDs can only be chained with themselves and cant really mix with V1 INFs without having a lot of separate controllers and cables.

@MIMCKMedia

5 ай бұрын

No not daisy chain and even not on same hub

I wonder how the performance is. It looks like the fan blades themselves are much smaller due to the screen. Likely poor airflow

This is a really cool idea. You would not plaster your whole case with those, but if you have a case with fans that face you it it a really neat solution to implement a "sensor panel" into the build without having to do any additional wiring or modding.

Ty Phil! I've rewatched that ending bit at least a dozen times and I'm still crying laughing! 😂😂😂😂

I'll keep these in mind- got the NZXT H6 Flow, so could get 2 of the 140mm for the bottom intakes. And to keep with the more subtle theme (black case, and all ARGB is set to white) I'd probably just populate the screens with CPU and GPU temps. :3c

@Audiosan79

5 ай бұрын

This fans will not fit in the bottom tray of a H6 flow. The frame of the fans are too beefy. And there is the inf mirror and the plug on the side. Same goes for the side tray for that matter.

@Altair00rion

5 ай бұрын

@@Audiosan79good to know

@warrenpoultney8215

5 ай бұрын

I have the NZXT H9. These would be perfect replacement for the side intake fans that came with the case. I have be quiet light wings, bottom intake, and top exhaust. If needed I could turn the argb off (I assume I could) if it's too much for the simple esthetics that I enjoy. Actually those lcd's with the blacked out argb would look really good in in my black H9, with the thin rear argb of the lightwings with a simple warm white.

I was skeptical of Lian Li when I thought he was Chinese, but when I learned he is Taiwanese, I appreciated his new adaptive designs better. He does have some good ideas for design.

@xavirav3358

5 ай бұрын

huuuuuuuh

Recently bought the evo and kitted it out with infinity fans but went the reverse blade route so the infinity mirror is showing on each fan. Looks fantastic. Not sure id need 10 fans with screens but I'd like 3 at the back next to the motherboard for temps

Love the fact that you can get some useful info in a neat unuque way. I plan to grab a set for my new tower for Christmas

After trying the Infinity model, I started disliking Lian Li's fans a lot. Sure, they look really good but you absolutely have to use their controller, I already have enough controllers from EK for the custom loop. And then you also have to run their software, which uses way too much resources even on a high end rig. But thanks for showing the new stuff

@HardDBR

5 ай бұрын

There's adapters out there for the Infinity fans that you can hook on normal ARGB controller and PWM connectors and then control them with any software like SignalRGB 👍

Did we need screens on a fan? Lol

@VirgilHawkinsIs

5 ай бұрын

I mean….we didn’t NEED RGB either…😂😂😂 I’m here for all the bs tech! 😅

@samuelvanlane

5 ай бұрын

We didn't need RGB either so what 😂

@zrowe2010

5 ай бұрын

Use to be $30 was expensive for a premium fan 2-pack and cases had five (3 in the case and 2-3 for the aio). Then they made cases have 9-15 fan slots and charge $150 for 3 fans costing $500+ to fill out your case. Add screens to the fans means you can charge more… Milking pc enthusiasts for their 401ks.

@frankmjr6571

5 ай бұрын

No. Want? Absolutely

@FilAmGabe

5 ай бұрын

TikTok auto scroller would be the way to go 😂😅

I just bought the GA ll LCD AIO 360, it's awesome. Lian Li is smashing

VERY nice! I like the sensor reading displays especially. Wonder if there are also other design styles of the fans, other than the hexagon RGB. Maybe just a simple looking fan with such displays, i'd instantly buy those as case fans.

46$ per fan isn't too bad compared to corsairs... I think that Lian Li charging this at 46 isn't such a terrible thing. It gives the opportunity for more cool ideas on builds.

@reneljubarskij3214

5 ай бұрын

single LL120 is 25-30 $, so it's not really a better value

@DESS71AN

5 ай бұрын

@@reneljubarskij3214 great comparison, now tell us the price of the QX fans :)

@reneljubarskij3214

5 ай бұрын

@@DESS71AN i don't see why would anyone compare those? lian li has screens, while QX are a bit cheaper... if you don't need such stuff (pretty much no one does), then you should rather invest into different and cheaper fans, such as LL if you want rgb

@DESS71AN

5 ай бұрын

@@reneljubarskij3214 bruh u make no sense. You can't compare one brands top tier fans with anothers mid tier

@reneljubarskij3214

5 ай бұрын

@@DESS71AN it's a fan... but go ahead and pay nearly 50$ for single fan, maybe now you will see my point

Can they run DOOM though?

@RGBeanie

5 ай бұрын

Asking the real questions!

I recently bought a combo deal at Newegg of a 3-pack Lian Li uni fan al120 v2 with another single al120v2. For some reason it was slightly cheaper to buy 4 fans than to buy 3. Weird sale logic aside, I'm very pleased with the fans both in performance and just being pretty. They really are nice to look at

I agree I would love to see a version of these with the diffused lighting on the sides like the og uni fans did. I really want some, but I must save first, who knows by the time I saved up they might've released a version with the diffused lighting. It would be great to see all the loads and temps without pulling up the software. I have thought about a small panel inside the case, but I would have nowhere to put it unless I swapped to another case. This would be a great solution.

But why

@petert3355

5 ай бұрын

Cause..... . . . . . Reasons. (Yeah I got no idea).

@blackrikudoentertainment7689

5 ай бұрын

Why not?

The price is less than I expected, Lian Li is always pushing the fan aesthetic. I'm a function over form so these actually add function and form and not just lights. It makes them worth it (again, to me and my building style).

I used the previous version of the fans and I loved them. They are ez to install with the interlocking mechanism. Only negative is the one connector is raised and, in some cases, do not fit because the space is too tight. Other than that, these fans are fantastic,

This is the most innovative dumb thing I have ever seen.. & Jay knows really well how to sugarcoat price..

Notwithstanding the hardwired cables in the hub, I'm okay with the pricing. These fans are made for a certain tier of buyer. Just like a Murciélago is made for a certain tier of customer. If one is complaining about the price, one probably couldn't afford it in the first place. Also, I'd definitely be using the screens as system monitors. Now for a few 'like-to-haves'. 1. Removal of the silkscreened company logo on the hub. It's not needed because the moment one sees the product, one knows it's Lian-Li on looks alone. 2. Have the option to have live video feed capture to the screens. Nice to have for security cam monitoring, video podcasts, etc. 3. Directional fan control through either software or a physical switch. No matter what orientation I have the fans, I could control if the fans or in-/outtake. 4. A more elegant mounting solution for the the hub. It could be secured by the hard drive brackets, magnets, or both. Conclusion: I think Lian-Li has done a bang up job on these fans with only a few missteps. I'd definitely have these in my case.

I really love these fans! I recently stepped away from using AIOs so I lost my sensor panel that comes along with the AIO pump. with this, I can still have sensor panels!

OUTSTANDING!!

This is real innovation and experimentation , cool they provide this new type of connecting fans and variants. Yes it is a niche product and few people will actually use them but still we have the option . I would actually want to see 2 non LCD fans and a LCD one connected . You can keep the cost lower and still have a basic sensor panel on the fans

I have never really been a fan of miniature screens inside my case but where I am thinking about doing a 011 style build this sort of makes sense for me so I might pull the trigger and do it

I agree, if available with the OG sides it would be a must buy for me.

very cool. would elevate customization even further if you're doing a themed build. Would love to see a build from you in the future that uses these👏

Im glad to see some innovation. I dont thinkt they're for me, but if i did id use them as a sensor panel for sure

Fans looks great. However I think they should take the approach Corsair is with selling different lengths and angles for their cables. Also, their hub is a lot smaller/better even though they don’t take into account the LCD screen.. I prefer the iCUE link, but this is neat as well

This is soo cool, will looks really nice on NZXT Elite case front glass. Great innovation.

DOPE AF ! Lian Li always coming up with new stuff

I'm excited! Great for monitoring at a glance. Pricing is GREAT, all things considered. Will def incorporate into my next build-Can't wait for Ryzen 8000 series now!

This is something I would definitely consider throwing into my system. Granted, I love being able to pull this info up and more on my Stream Deck w/ HWInfo, but this would be good when I'm just gaming and don't want to look at all 32 tiny ass screens.

My husband and I both have O11 Evo builds, mine is white and his is black. I’m 100% gonna surprise him with a 3 pack of these and some infinity fans. He’s got the SLs right now and I’ve been wanting to get him an upgrade. I think 3 of the reverse ones vertical in the middle, upright slots showing the sensors would be great.

If your case supports mounting them in a way where you can see the screens, it is a great idea. If not, then not really. I guess you could install them as front intake and somewhat see the screens? Anyway good to see Lian-li coming up with new stuff.

They’re awesome. Going in my next build.

I like this idea. I'm planning a themed build for a band and I can put one of their videos on a fan with temps on the other two or something like that. So yeah I can see uses for this for sure.

@ulrichkalber9039

5 ай бұрын

You can put a picture of a fan of your Band on each screen.

They look fab and will look great in my LanCool II case at the front as I modded the front mesh panel to allow more air flow so would be able to see the screens without the mesh in the way. Think they would look really cool in that new NZXT case with the angled fans at the front. Am defo considering getting the triple 140mm pack as and when they release them. Merry Christmas to Jay, Nic and Phil and to everyone that reads this comment.

It's beautiful and I need it!

I can’t wait to get one. I just recently finished a build using a Thermaltake Core P3 Snow edition, with an ASRock Sonic mb, to create an amazing Sonic theme. I used the Lian Li infinity 360 white cooler, with the centers making a decent representation of the rings. This new fan will bring a whole new dimension to the ring representation, allowing me to create a gig of the rings actually spinning 😮 I can’t wait.

They also have covers for the mounting screws which makes them look much neater.

@9:20 I feel this micro-rant to my very core. I bought a Lian-Li lan cool 2 and a bunch of Lian-Li fans to go inside of it. Big shocker to me when none of the fans had enough cable length to make any of the runs I wanted to make. .-.

The sensor data on the LCD is great. I believe GPU hotspot temp was missing from the options (easy to add later though). The price is outside of my acceptable range, though not terrible for what you get. I kinda wish they were more geared toward interpretability and open standards.

I will definitely get a triple 120 pack of these fans for the side intake on the O11 Dynamic EVO. Will set top fan as CPU temp or load, middle as a custom image, and bottom as GPU temp. Will come in handy and look a lot better than the standard cage on the back of most fans.

These would look awesome for my front 3 rad fans in my Corsair 4000X, sort of behind the tinted glass. Would have them as sensors for sure, easy to see information!

Love these fans, very innovative!

Love them. Reverse 140’s for my intakes on the back side of my Evo XL please! I’ll use the sensor feature in them for cpu and gpu temps! But the bad part is I just bought 6 Lian Li uni sl-inf 140’s….now I have to buy these too. Lian Li is getting lots of my cash 💰

i really like these fans they looks very clean! only thing i dont like is the mirror on the side... i had corsair fans before my itx build... i hated icue... i think next build i will try lian li

Looks cool. I want the Infinity fans because the actual blades light up tho. Also, it seems wierd that you would get the non reverse blade ones at all. So its be like 3 pack of the normal infinitry fans, then 6 reverse blade, and 1 normal one. Would have been nice to actually have it on the back plate by default. And lastly, they need to update their software. L connect def needs some love.

I would love to have this version of the fans minus the LCD screens. The RGB on these and the fan's new design are just so modern and sleek looking!

Oh these would be perfect for my case! I would use 4 of these if the fan speeds are decent. 1 rear, 3 bottom. Perhaps it would be nice to have something similar in the top as well, but then you don't see the screen which is a problem.

That's cool. I would definitely use them just to have as sensor panels but I would want the fan blades to light up like the Al version. Not a big fan of the infinity mirror.

That is really cool! I just wished they'd go open source on the software or on the control for the future ( because I'd love to use something like this, years down the line ) !

Very cool concept, being able to put temperature/load graph while not taking more space is nice.

Pretty nice.. would be great for someone that likes it simple.. but I'd prefer to keep using Aida64, for my sensor panel.

I've been debating on a new high-end themed build for myself and these would fit that theme perfectly.

These make me want to upgrade, the fact that it can show me the temps/load of my cpu/gpu are awesome. I'd buy them if i could find someone to pawn my old SL120 v1 off on.

look at the build Stuart from GGF Events just did using these fans as part of his review for the O11 Evo RGB case. I don't know whether he used some different software customise the colours for the sensors but he made them look sick and they matched both the colour of the coolant and the colour of the lighting on the fans. you should check it out as he's now living in your manor after moving from Australia

I ... may just get some of these for my next build. One of them. (Eh, next build's in a Fractal North with the mesh side, so probalby a different build.) RGB finally "sold" itself to me with being able to change with temperature as a sort of built in monitor (and dynamically changing on the KB for different games and programs.) This... I could use. Depending on the case. Even just one as an exhaust in the back (which I always see) with a temperature or cycling temperature/load would be nice.

I love it. Don't know how I'm going to display it on a 216 but I love it.

If these get some support for more customizable screens/adding some logic. They could be great as a stylish option for a rack mounted homelab/server.

Thx Jay ! Finally i have THE reason to say: naahh, don´t need an AiO to have a Display on my cooler. Damn! ... i guess i will check how good the fans are. "could" be possible to get them for my RIG.

I sure gonna get them in the 140mm for my next Build in the EVO XL !

I think this has amazing aesthetic potential for them builds. I'm planning a new theme build that these would go great in. If I could find the 140s anywhere...