LG Range Oven not Heating? How to diagnose, test, & troubleshoot your Oven
Тәжірибелік нұсқаулар және стиль
Is your LG range oven not heating? Don't worry, we have you covered! In this video we show easy step by step directions on how to troubleshoot and fix the problem with your oven. Discover easy solutions to get your LG range back in action fast. We cover a wide range of things that can cause your oven not to heat, from heating elements to temperature sensors to control boards and more.
Need parts for your LG range? Purchase Genuine LG replacement parts here: partsdr.com
Tools you'll need for this repair:
- Philips Head screwdriver
- Needle Nose Pliers
- Multimeter
Table of Contents:
0:00 - Intro
0:07 - Where to Purchase
0:15 - Oven won't preheat
0:24 - Do the top burners work?
0:51 - Pull out range and unplug
1:05 - Remove back panel
2:01 - Test oven temp sensor
2:48 - Test bake & broil elements
4:31 - Wiring inspection
4:47 - Bad relay control board
5:13 - Bad relay contacts
5:24 - Remove Control Board
7:02 - Model Tag Location
7:07 - Install control board
8:00 - Reconnect Wires
8:39 - Bonus Tip
8:59 - Reinstall rear panel
10:00 - Test it out
10:25 - Bye for now
Range shown in video: LRE3012ST/01
Appliances break, but repair & maintenance doesn’t need to be difficult. Find the right part for your job at: partsdr.com/
We sell OEM appliance parts for Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, Frigidaire, Electrolux, Tappan, Westinghouse, Kitchen Aid, Jenn Air, Bosch, LG, Samsung, and more.
If you found this video helpful, please click the thumbs up button and leave us a comment below.
Connecting with us:
Facebook: / partsdr
Twitter: / parts_dr
Repair Forum: forum.partsdr.com/
Blog: partsdr.com/blog/
Subscribe to our KZread channel: kzread.info?sub_c...
#PartsDr #MakeAppliancesGreatAgain #LG
Пікірлер: 24
Did this help you fix your broken oven? Let us know!
@gregmitchell4317
10 күн бұрын
I will let you know. thanks for the repair video.
@PartsDr
9 күн бұрын
@@gregmitchell4317 Sounds good!
very concise and compete repair video. I will order the relay control board since that looks like the problem with the F9 error code. I replaced it approximately a year ago but it didn't last very long.
thanks to this video I feel confident in at least trying to repair our oven. I just need to get a multimeter but MAN the price ranges are huge $30 - $300.
@PartsDr
Ай бұрын
We are glad that we could help! Let us know how the repair goes for you and what you find. Usually for the average DIYer, a multimeter in the lower end of that price range will work just fine for you. For example something like this would be a decent one: www.homedepot.com/p/Klein-Tools-600-Volt-Digital-Multi-Meter-Manual-Ranging-MM325/320822947
@sarahierstein8169
Ай бұрын
@@PartsDr thank you for that recommendation. Any parts I need I will for sure be ordering from you!
Question for you: LG LDE 4415 LDE 4413 LDER 4411 knob lights are on but nothing else works.
Great video! I recently replaced the broil element on my LG LRE30453ST Oven (Thanks PartsDr!). Yesterday, I was baking and the food remained uncooked, after the display showed 330 degrees for 45 min. I had set it to 350. After removing the cover, checking the bake & broil elements, this is what I found: The bake element turns on (230V) for about 7-8 seconds and turns off. The broil element turns red hot whenever the bake element is off, and after about 2-3 mins, it repeats this cycle. The temperature is probably correct, since the temp sensor is near the top beside the broil element. Since the elements appear to work fine, I though of the control board, but I am getting no errors on the display at all. Any thoughts?
@PartsDr
13 күн бұрын
Did the bake element pass the ohm test?
@daniellineberry7184
10 күн бұрын
@@PartsDr Yes.
@PartsDr
10 күн бұрын
@@daniellineberry7184 If you set the temp to 350, it should average 350 when the elements cycle on and off. So it might heat up to 370, then drop to 330, and repeat that process over and over to average the set temperature of 350. If the oven isn't ever reaching the set temperature of 350, then it would most likely be an issue with a failing control board. One of the relays on the control board could be starting to fail as we show in this video. Over time it will get worse and eventually they can stop heating alltogether. Let us know what you find as the solution to the problem.
When testing the broil and bake elements, how many Ohms would be bad?
@PartsDr
2 күн бұрын
Usually when the elements fail, they will be an open circuit and they will not register any ohm value.
I’m testing the same machine right now that you have with a brand new multimeter the top element mine is reading 13.1 in the bottom element is reading 16.1 is that good? Yes or no thank you.
@PartsDr
2 ай бұрын
Those readings would indicate that both elements are good. Let us know what you find as the cause of your problem.
@kevinmcconville462
2 ай бұрын
I found a lose wire on element two on the bottom. Fix the connection oven seems to be working perfectly. Thanks to your video. You made my life easier appreciate you.
@PartsDr
2 ай бұрын
@@kevinmcconville462 Awesome! Glad to hear it was a simple fix!
Do you leave the oven unplugged when you test using the multimeter?
@PartsDr
Ай бұрын
Yes, the oven needs to be unplugged when testing with the multimeter. Let us know if this helps you fix your oven!
My elements tested fine, but the temp sensor got no reading at all. That should be my issue, right? Confusing because the oven display shows a temp on it... 🤷🏻♂️
@PartsDr
3 ай бұрын
What kind of temperature reading is the display showing? It sounds like you may not be testing the temperature sensor properly.
@randomninja
3 ай бұрын
@@PartsDr I think you're right, I tested a few more times after I commented and I was getting a reading right around where you said it should be. It's a pretty old multimeter I inherited from my dad so it's probably not the best.
@PartsDr
3 ай бұрын
@@randomninjaLet us know what you find as the cause of the problem.