Пікірлер

• 
  @RonaldShawver2 сағат бұрын

  Very helpful video

• 
  @ODUyoutube3 сағат бұрын

  I bought this kit but at the last step when reinserting the tray, the seal is not tight on the sides open to the refrigerator. How can I make it a tighter seal when the tray is reinserted? Thank you

• 
  @deannalee29564 сағат бұрын

  Can you add vinegar to the washer to clean it

• 
  @MechanicergКүн бұрын

  Thanks to your video, I did all the steps properly and fixed my freezer. Thank you 🙏

• 
  @PartsDr23 сағат бұрын

  You're welcome! Nice job fixing it yourself!

• 
  @joannecanevet73Күн бұрын

  My LG dishwasher door latch broke and our local appliance repair person won't repair LG or Samsung. Can I do this myself?

• 
  @PartsDr23 сағат бұрын

  We have a video on that repair here: kzread.info/dash/bejne/g2mVpdiQqrLIZZM.html

• 
  @SchlockstarJoeКүн бұрын

  In the last 24 hours I’ve completely disassembled my dishwasher trying to find a leak. I finally thought I should check the new garbage disposal for issues and found it had a plug. I’d like to formally thank God for, yet another, well earned lesson in humility.

• 
  @TIPOFDAMIT2 күн бұрын

  Can i ohm out the motors? I have two fans for my freezer

• 
  @PartsDrКүн бұрын

  Yes can perform an ohm test on the motors, but even if the motor passes that test the motor can still be bad. A better test would be doing a voltage test if you are comfortable working around electricity. We have a video that shows how to do that type of test here: kzread.info/dash/bejne/qm2arZKbfpqYfaQ.html

• 
  @laneyrox4lifeforever2 күн бұрын

  Wow - thank you so much! Saved me a lot of $ and headaches. Helpful video. This was exactly what was wrong with my LG dishwasher.

• 
  @PartsDr2 күн бұрын

  That is great to hear! How did your dishwasher act when the door latch was failing?

• 
  @cartoonfredbarney2 күн бұрын

  Thank you so much! Now I know exactly what to do before just buying a new heating element and possibly have it short out too! No nonsense instructions - that’s what I like!

• 
  @PartsDr2 күн бұрын

  Great, we are glad we could help! Did your dryer show an error code when the heating element failed?

• 
  @Mxslots2 күн бұрын

  Great video , thanks

• 
  @PartsDr2 күн бұрын

  You're welcome!

• 
  @gerrypaci17913 күн бұрын

  Nice video and thank you but for my particular issue, didn’t solve it. Must be something else wrong. I’m just likely buying a new one. Samsung appliances suck.

• 
  @PartsDr2 күн бұрын

  Sorry to hear that! If you find the solution to the problem, please let us know.

• 
  @gerrypaci17912 күн бұрын

  @@PartsDr no worries, it appears to be the wiring on the side of the door. I found it on another video. I had to ‘jump’ the 2 yellow wires. Very strange issue.

• 
  @TheBoss-ie8dj3 күн бұрын

  Question for you: LG LDE 4415 LDE 4413 LDER 4411 knob lights are on but nothing else works.

• 
  @PartsDr2 күн бұрын

  Multiple model numbers like this usually means that you are getting the number from the owners manual instead of the tag on the range as we show at 7:03. With the range unplugged, start by checking the power supply to the range by using a multimeter and also look for any burned wires at the terminal block where the power cord attaches to the range.

• 
  @QuantumSolace-u3f3 күн бұрын

  Do you have to re-program after replacing the control board?

• 
  @PartsDr2 күн бұрын

  No, these boards come pre-programmed and they are ready to go after installation.

• 
  @ramonperera62183 күн бұрын

  I've been watching your videos for a long time now to fix several problems on my Samsung fridge. I was looking at this one expecting to find a clue to a problem still persists....: The back cover of it is seatting too much and constantly in the upper right corner, where the ice maker is located. So much that the metal cover began to rust some time ago. I took out the water hose to the ice maker looking for a puncture or if it was out of place with no results. Everything seems to be fine. There is a lot of ice build up aroung the ice maker. I fixed it twice already but I can not get rid of the problem. Could you suggest me something to find a final solution ? I have been asking some other technicians but I had no answers. I would really appreciate yout attention and expertise on this subject. I do not want to spend more money on parts until I know what the real problem is. Thanks a lot, Ramon Perera, Miami

• 
  @lancedixon8113 күн бұрын

  I am getting a 0010 code(thermistor reading out of range). Its the only code I am getting. No ice and freezer isn't freezing. Could this be the problem for both?

• 
  @PartsDr2 күн бұрын

  0010 code - Freezer Icemaker thermistor reading out of range. If you do not have a freezer ice maker installed, it will be normal for this error code to be displayed.

• 
  @lancedixon81120 сағат бұрын

  @@PartsDr what do you thing my freezer problem could be? I have no ice buildup. When I put it in service mode the test appears to be bringing down the freezer temperature. I’ve opened up the back and cleaned up all the hair and dust, all the fans are working. It’s got me stumped.

• 
  @grantyol98884 күн бұрын

  Thank you this was very helpful! I was able to replace the parts of the top rack

• 
  @PartsDr2 күн бұрын

  That's great! Nice job fixing it yourself!

• 
  @LaTienditaJuguetesMerida-tr2fl4 күн бұрын

  Thanks 🙏

• 
  @PartsDr2 күн бұрын

  You're welcome!

• 
  @JadeYmanii4 күн бұрын

  Hi! Do i have to unplug the fridge to do this

• 
  @dee-t7p4 күн бұрын

  Very good description, easy to follow and very helpful!! thank you for keeping it simple

• 
  @PartsDr2 күн бұрын

  You're welcome!

• 
  @songman684 күн бұрын

  This can be done through the lint duct in the back without having to take the entire dryer apart. You will be working in a tight area though and make sure you put a towel over the sharp metal edges or it will cut you. All you have to do is take out one screw that holds the lint duct in on the back. Then you can get to and work on that idler pulley. I did mine that way and it was a tight work area but I got it done.

• 
  @PartsDr2 күн бұрын

  Thank you for the feedback. The technique that you are describing works on some older models of Samsung dryers, but on all of the newer models that we have seen, they have changed the design and removed the rear access panel.

• 
  @kathiefeeney81314 күн бұрын

  I have a Ge GNE27JYNWFFS no ice dispenser or water - frig wont stay cool and freezer freezes up - any idea

• 
  @PartsDr2 күн бұрын

  Check for a failure of one of the automatic defrost components (defrost heater, defrost thermostat, defrost temperature sensor, main control board).

• 
  @raeannabenes45864 күн бұрын

  Aloha!! How can I remove the top part of the agitator? Any insight/help will be greatly appreciated!

• 
  @PartsDr2 күн бұрын

  It didn't remove by squeezing the handle and rotating as we show in the video?

• 
  @raeannabenes4586Күн бұрын

  Not the whole agitator itself. I was talking about the cap of the agitator.. but i did figure it out :) Thank you for your response!

• 
  @amandajohnson13984 күн бұрын

  Thank you, man. You taught me so much in just a few seconds. Thanks!

• 
  @PartsDr2 күн бұрын

  Great, we love hearing that! What kind of problem were you having with your spray arm?

• 
  @daveabbott53315 күн бұрын

  Your instructions were right on and very helpful. Yours was the only video I watched that discussed the test button on the bottom of the ice maker. I pressed that on my old ice maker that I thought had failed and it went through a cycle, dumping ice and refilling. I'm waiting now to see if that was all it needed to continue working. Thanks for your video!

• 
  @PartsDr2 күн бұрын

  Glad that we could help you. Let us know how it works for you!

• 
  @lawsonstallings19555 күн бұрын

  Very helpful. Thanks!

• 
  @PartsDr5 күн бұрын

  Great! We are glad we could help!

• 
  @SS-pq3lj5 күн бұрын

  Hello, any method to locate the correct part number for the spring? GE doesnt provide it, only the mullion door. GNE25JMKKFES. Thank You.

• 
  @dsteinhil5 күн бұрын

  When testing the broil and bake elements, how many Ohms would be bad?

• 
  @PartsDr5 күн бұрын

  Usually when the elements fail, they will be an open circuit and they will not register any ohm value.

• 
  @tlanders20105 күн бұрын

  Very, very useful. Excellent narration and spot on. Had a few variations in my machine, however, the same process. My wife is very pleased that her dryer is back online.

• 
  @PartsDr5 күн бұрын

  Awesome! Nice job fixing it yourself!

• 
  @sakiajohnson7255 күн бұрын

  Mine is on lock mode. How can I fix that?

• 
  @PartsDr5 күн бұрын

  Usually you hold down the lock button for a few seconds to lock or unlock it.

• 
  @wafaalhsn6596 күн бұрын

  لو سمحت ممكن تشرح كيف افحص dryer fan لجلاية الصحون بوش سيري٨ لانو يطلع e:07 ولانعرف كيف نفحص dryer fan ان كان العطل منها اولا قبل شراء قطعه جديده

• 
  @danielharrison43596 күн бұрын

  How do you remove the display cover from a GE CYE22TSHCSS refrigerator? I am unable to get the clips to release.

• 
  @yessie15056 күн бұрын

  This is a great video!!! Very very helpful! Now I can clean the ice maker!!! Thanks so much for this video! I looked and looked and finally stumbled on yours!

• 
  @PartsDr6 күн бұрын

  We are glad you found this video! Please post your refrigerators model number to help more people find this video. kzread.info/dash/bejne/mnyBm5RtaLW1h7w.html

• 
  @sergior55526 күн бұрын

  What if you have an ice maker in the freezer? Neither the top nor the bottom one is producing ice. Water dispenser works fine .Water filter does need to be replaced. Any suggestions where to start? Thanks guys!!🙏🏽

• 
  @PartsDr5 күн бұрын

  Did both ice makers stop working at the same time?

• 
  @sergior55525 күн бұрын

  @PartsDr Yes! Had a tech come out and diagnosed a freon leak, but couldn't pinpoint it. So he didn't want to fix what he thought it MIGHT be. Quoted me $900 repair. The fridge is less than 7 yo! Not sure if I should dump more $$ into it or not. Any suggestions?? And thanks for replying!!👍🏾🙏🏽

• 
  @PartsDr5 күн бұрын

  @@sergior5552 It might be worth repairing, depending on how much a similar model would cost to replace yours. You will have to make that decision.

• 
  @Gryffie17 күн бұрын

  What plug does the owi sensor use? Mine is corroded, and i need to clean it before i replace the sensor.

• 
  @PartsDr5 күн бұрын

  It looks like on our dishwasher the OWI sensor used the yellow wires kzread.info/dash/bejne/hK6tk6aonaaupbg.html

• 
  @scoot777777 күн бұрын

  Thanks

• 
  @PartsDr7 күн бұрын

  You're welcome!

• 
  @davecarter99377 күн бұрын

  Would you know the button combination for test mode on a LDS5540ST? There is no “Start” button on the panel. I’m getting an HE error at the end of the wash. Heater element is new so try to figure out what else to check

• 
  @RyeMoes7 күн бұрын

  I did all of this except the control board. Great results for 2 months, now ice is frozen over again and same issues as before. Is replacing the control board the final step I need or did I damage the new parts I already replaced by not replacing the control board the first time?

• 
  @PartsDr7 күн бұрын

  When everything ices up, it can damage components. The control board in the kit is different than the original. If your model is within the date range, all parts in the ice maker service kit should be replaced and installed.

• 
  @RyeMoes7 күн бұрын

  @@PartsDr crazy thing is when I empty the bin it no longer freezes up and works again. I ordered the control board from your site. Fingers crossed!

• 
  @RyeMoes8 сағат бұрын

  @@PartsDr I replaced everything and my new issue is it is acting like it will never stop making ice. So it eventually gets stuck because there is so much ice in the bucket.

• 
  @PartsDr7 сағат бұрын

  @@RyeMoes Double check all of your connections. The ice full sensor is an IR sensor that is part of the auger motor assembly.

• 
  @mtl65627 күн бұрын

  Very helpful thanks a bunch.

• 
  @PartsDr7 күн бұрын

  You're welcome!!

• 
  @hollykuehu44198 күн бұрын

  Very good!!!

• 
  @PartsDr7 күн бұрын

  That's great to hear! What kind of problem are you having with your washer?

• 
  @tomkathylindstrom70478 күн бұрын

  What do the last two digits on some boards mean? I have an 04 on my board, but I see others referenced that are 07 or 03, and are they all compatible

• 
  @PartsDr8 күн бұрын

  The different numbers indicate a different part number. They are usually not interchangeable and the parts are usually used on different models of appliances.

• 
  @oscarshoenfelt99288 күн бұрын

  My ice maker went out and then the next day the fridge started making a really loud noise coming from the back freezer. tried unplugging for 24 hours and this helped for a day with the noise but no ice production has returned. I did a deep dive and went through all of the diagnostic codes and all came up clean. water comes from the water dispenser. changed the water filter as well. noise is coming from the back motor/fan in the freezer by the condenser. Freezer also starting having some frost as well. Fridge and freezer appear to be holding temperatures appropriately. any idea on how to trouble shoot further so i can order the correct part/parts? would the water valve not working cause the fan/motor issues

• 
  @PartsDr8 күн бұрын

  If you are getting excess frost/ice build up on the evaporator coil in the freezer, that could indicate a problem with the automatic defrost cycle. This frost can block airflow to the ice maker compartment and cause the ice maker to stop making ice.

• 
  @perryjones25698 күн бұрын

  Great video , thank you so much. Very clear and easy thank you.

• 
  @PartsDr8 күн бұрын

  You're welcome!

• 
  @michaelmolina57428 күн бұрын

  My icemaker fan runs when I use system test #50. But it doesn't run (well or at all) during normal operations. Is this a bad incemaker fan, motor, or board?

• 
  @PartsDr8 күн бұрын

  Maybe check to see if there is a temperature sensor in the ice maker compartment that is failing. kzread.info/dash/bejne/hXaa09Gzfsqyibw.html

• 
  @cyberotter069 күн бұрын

  Did you cut the tube at the end? It looks shorter…

• 
  @PartsDr9 күн бұрын

  No we did not cut the tube.

• 
  @FrankRocha-ng4me9 күн бұрын

  Saved me a huge headache, much props!

• 
  @PartsDr9 күн бұрын

  Great! Glad we could help!

• 
  @kala17809 күн бұрын

  My start relay got busted, and I opened it for fun. Can anyone explain to me what the round disk (at 3:54) is and what does it do? Because I decided to peek inside the starter relay for fun and found the disc and I'm not familiar with its use. Thanks in advance. :)

• 
  @PartsDr8 күн бұрын

  The round disc inside a refrigerator start relay is a PTC (Positive Temperature Coefficient). It helps start the compressor motor by initially allowing current to flow to the start winding. As it heats up, its resistance increases, reducing current flow and allowing the motor to run on the run winding alone.

• 
  @kala17808 күн бұрын

  @@PartsDr Thanks!!! i figured as much based on information on this video, that it may be that heat sensetive "resistor". It just based on appearance looked almost like an insulator to me because I was not familiar with this sort of part, that i was a bit confused why would there be metal bars going into it on both sides if it was an insulator. Also it also is connected to the triangle shaped connection for the compressor motor (i guessed) so I though it should work as some sort of a switch or regulator or something. I think my "ptc" had failed because the plastic had some browning around it, although it was still in one piece. edit. Just googled and these PTC's are called "thermistors" also, at least in my language. I think i'm at least a bit a tiny bit more familiar with that word, but still never seen one like this.

• 
  @PartsDr9 күн бұрын

  Learn how to test if your fan motor is bad here: kzread.info/dash/bejne/qm2arZKbfpqYfaQ.html

• 
  @dirtyfishole9 күн бұрын

  Clear, concise, and to the point. Nicely done and thanks for saving me from calling someone.

• 
  @PartsDr9 күн бұрын

  That's great to hear! What kind of problem were you having with your drain loop hose?

• 
  @ADs5489 күн бұрын

  Its sad that whirpool knows there is a huge issue in their dryer timer knobs and they dont replace it if ur warranty is out.

• 
  @keanNeto10 күн бұрын

  Do you know how can I signature a program ?