"That went straight on, luckily for me" We all saw that jump cut ;)

@TellyDan

2 жыл бұрын

Lol 🤫, I actually got the wire caught on something below so I cut it where I dropped the f bomb and went again

@thinkabouteurovision2910

2 жыл бұрын

@@TellyDan It happens!! Still, I'm sure it took a lot less tries than the time I had to help one of the installers at my workplace with an install on a similar bracket. Must have been about 20 attempts and no swearing as in a customer's house!

@TellyDan

2 жыл бұрын

@@thinkabouteurovision2910 lol I've been in those situations before when something interferes behind it and you can't get it on the wall but you still keep trying. No gap wall mounts on my own with the tv high up was my biggest struggle

@elmalloc

9 ай бұрын

DO NOT LIE!@@TellyDan

i needed to see this video before i purchased one. thanks a million

@TellyDan

2 жыл бұрын

You're most welcome

@Transcendent-Economics-101

2 жыл бұрын

@@TellyDan Me too -- You are the MAN!! 👍👍👍👍👍... and my other half says that you are "handsome"😊

@debello

2 жыл бұрын

Same here man, actually I already ordered the TV and thought "Damn, I need to double check if I actually can wall mount it.. 😅🤣". Thanks a lot!

Absolute life saver. Great video mate.

@TellyDan

2 жыл бұрын

Thanks mate

I mounted my 55 inch BX on my own. Can't believe how heavy they actually are 😂 Absolutely dreading the day that we may have to move house LOL

@TellyDan

2 жыл бұрын

Definitely easier with 2 people

@Peeples01

2 ай бұрын

I set it up myself on the standing mount and it was nerve racking. I moved last week and people kept asking "why didn't you save the box?"... they didn't make the box reusable! Moving it was a pain. Wall mounting it with two people soon.

@clintonfredricks

2 ай бұрын

@@Peeples01 this was a crazy time to respond to this comment, because I'm moving house next month!! 😂 As I said almost 3 years ago, I'm DREADING it hahaha

Very well explained, thank you!

For a budget of around £1200 would you say the B1 is the best way to go for an OLED?

What is the distance from bottom to first hole of the vesa? thanks

How did you put the back cover back on after placing the TV on the wall bracket?

great Video I am Waiting to this TV would you Recommend a SOUNDBAR MOUNT for this TV as I have the LG SN8YG 3.1.2

Do you know which wall mount is compatible with Samsung AU7100 55”

Great Video mate. May I know which model of wall mount you're using here ?

You could mark the locations of the bracket by putting post-it notes on the top/back edge of the screen.

@B_M_A

Жыл бұрын

Nice vague suggestion

@MrBulletpoint

Жыл бұрын

@@B_M_A lol

Thanks bro! Getting the 65 inch TV tommorow! Finally upgrading to oled

@xWHITExEAGLEx

Жыл бұрын

How is it mate? Considering this TV in 65 inches too. Some people said it's dim. Would it be okay in a room with evening sunlight that isn't direct?

@dangnguyen9137

Жыл бұрын

@@xWHITExEAGLEx tv is highly reflective no issues because it's in my bedroom... Tv is fawken awesome.. I use filmmaker mode which is the darker setting too.. just buy and try.. don't like it? return..=)

@flashybike1

Жыл бұрын

@@xWHITExEAGLEx got my 65 yesterday, it’s blown me away

I have a 65 one, currently standing on its foot but I want to mount it and there's much more of that thin screen sticking out on all the sides and I am so worried about cracking it. It is a heavy beast! I'd honestly prefer a tv with a more sturdy case all around.

@Daribro

Жыл бұрын

Did you manage to do it? Same here and i came fore that very reason to see how to handle the screen without beaking it.

Hi, thanks for the review, but can you please tell me the distance between the lower hole and the bottom of the TV. It's very important to find the VESA center for other mounts and I cannot find this dimension anywhere on the net. I know it is Vesa 300x200 but want to calculate where is the Vesa center

@TellyDan

2 жыл бұрын

Hi mate for the 55 inch it's approximately 140mm, I think I measured on my oled c1 unboxing video

Have you made a video on building a Hama tv stand as I cannot get the holes to line up between glass base and the column Many thanks John

@TellyDan

3 жыл бұрын

Yes I have search universal pedestal stand. Take the bottom piece off the column first I think.

Hi Dan, considering buying a 65"C1 and worried my soundbar will block the bottom of the screen. Can't wall mount it. Do you recommend any pedestal stands with a central footprint that can raise the screen up say 3 inches?

@TellyDan

2 жыл бұрын

Hi Sachin, sorry for the delayed reply. Get a universal pedestal stand you can adjust the height of it then

Hey man, thanks for SO many good vids, greetings from Chile 🇨🇱.. Small Q, do all C1 have the 200x300 VESA setup? TIA!

@TellyDan

2 жыл бұрын

Hi mate thanks for that. As far as I know the 55 and 65 does

Hi thanks for the great in-depth video. Could you tell what length M6 bolt you used. Cheers many thanks.

@123benley

2 жыл бұрын

M6 20mm he said in another reply

Great video! Can you link the screws you used so I can buy them. I just want to make sure I get the right ones. Thanks!

@TellyDan

2 жыл бұрын

I think they're just m6 x 20mm

What size of the screws do you have to mount those arms in to the TV? I am using old wall bracket but the screws are way too big… I can’t believe LG and Costco did not include 4 screws (50 cents worth) in $1800 tv … so frustrating

@TellyDan

2 жыл бұрын

M6 at maybe 15-20mm long

@jerrywielo2952

2 жыл бұрын

@@TellyDan thanks - it is M6-1.0x25mm needed to visit Home Depot price $1.07... (don't know why LG manuals specify M4) :|

What size/model screws are used please?

brilliant video dan I only have m6 20mm they screw in all the way is it safe to use

@TellyDan

2 жыл бұрын

yes you should be fine

Is there any risk to mount a Oled C1 65 on a mount with a tilt function?

@20BobbyDigital

2 жыл бұрын

From my personal experience it should be fine. I have my 65 inch c1 On a sanus. Tilt mount. It’s perfect

Is wall mounting bad for the TV?

I fear no more. Thank you.

@TellyDan

2 жыл бұрын

You're welcome mate

So the tv can move side to side on the wall mount? Does not appear to be very secure?

@ryanklip24

Жыл бұрын

It’s supposed to be able to move side to side.

Closes HDMI behind?

Do you know the screw size ? I need to buy new screws bc i lost my old. And the screws for my old TV dont work

@TellyDan

2 жыл бұрын

For the vesa mount I think they're m6 x 15-20mm

@snip4

2 жыл бұрын

​@@TellyDan thank you ! M6 ist right. The lenght was the Important Part. I'll Go to the Hardwarestore now

My tv doesn’t have holes?

Do the rear screws on the TV come in the TV box?

@Dreadpirateflappy

2 жыл бұрын

no, they come with mounts though.

How can i find this mount in amazon?

With the tv so thin do you think it’s ok to use a swinging mount?

@ofensatul

2 жыл бұрын

how is this a swinging mount lol ?

@Loafer316

2 жыл бұрын

@@ofensatul obviously talking about buying a swinging/moving mount not this one!

I have a cx I'm so worried about the screen cracking when lifting it to mount

@TellyDan

2 жыл бұрын

2 people lift from underneath and don't squeeze the screen, you'll be fine

@crashinc06

2 жыл бұрын

@@TellyDan copy that

"Geeeently wind it in" *BASH BASH, BASH BASH BASH BASH* XD

Does that mount you used come with the tv? I live in the US.

@danielbenjamins

2 жыл бұрын

No it doesn't, you have to get a mount yourself

What is the size of this? I cant believe you mount it yourself

@TellyDan

2 жыл бұрын

55 inch, I wouldn't advise you to mount it yourself if you can avoid it. Accidents can happen so easily

Where are you based Dan? No website link

@TellyDan

3 жыл бұрын

Gainsborough Lincolnshire

@Kam-mv7tl

3 жыл бұрын

@@TellyDan 👌

If there is just one thing I learned through this, and if/ when I need to move this beast of a TV, get help. Im a big guy, and I was too proud to ask. Mostly I got lucky and pulled it off, but I'd never try it again. You are literally juggling thousands of dollars of equipment. It's like those people that want to risk it all on a dodgy overtaking manouvour to get 10 seconds ahead, it's simply not worth the risk. If you like those sort of risks, there is a much better time to be had at your local casino. Here you bet everything, and win nothing.

@TellyDan

2 жыл бұрын

I think you're right there mate, one slip and its instant regret

What’s a good tv stand for the lg C1 ?

@BYT13

3 жыл бұрын

It comes with one.

@DasaniJay

3 жыл бұрын

No like a tv mount to put on the wall

@BYT13

3 жыл бұрын

@@DasaniJay Oh. I'm just using the one that came with my TV stand. Can't give any helpful input if you know what specs and features you want the mount to have, sorry.

@karanbraria93

2 жыл бұрын

@@BYT13 does the c1 come with their wall mount?

@BYT13

2 жыл бұрын

@@karanbraria93 No, just the stand.

i can't believe i bought a super expensive wall mount with all sorts of movement but it doesn't support this STUPID 300x200 standard. i'm so pissed off right now

How can we make sure that Samsung smart remote supports Bluetooth?

@TellyDan

3 жыл бұрын

Pretty sure the smart remote is all Bluetooth apart from the power button

What is the bolt size for the c1?

@BYT13

3 жыл бұрын

M6

@mets23q

3 жыл бұрын

@@BYT13 m6 25mm?

@BYT13

3 жыл бұрын

@@mets23q Just have to advocate following the included manual with your mount, but you should be good. To summarize the below, only 10mm actually went into the TV, but 25mm won't hit the panel or anything important. After all the washers/spacers and the frame itself, about 10mm of the actual thread went into the TV. I had two lengths of screws with the mount I had, 12mm and 35mm. I've read that 8mm of thread or 4 revolutions is fine, although the C1 does seem to accommodate for more, at least the 48" model. Not recommending this next bit, but out of curiosity I tried threading the 35mm bolt by itself and I was able to get it at least two-thirds of the way before deciding deciding that was enough. I did check the hole with a flashlight and compared the thread to the back "box" where the mounting holes lied (never reached the actual display panel).

@tito082895

2 жыл бұрын

@@BYT13 so 25 mm should be fine then right Im using a spacer of 5mm and I have m6 30 mm do you think that will work

@BYT13

2 жыл бұрын

@@tito082895 It should. Just make sure it's fully threaded in (the threaded part of the bolt shouldn't be visible) without overtightening it. If you encounter resistance, immediately stop, but that should be a nonissue (if you try lining up the bolt with the underside of the TV, it comes short of reaching the display).

Wait, so there is no lock? Anyone can just lift the tv and it comes off?

@InvadersDie

2 жыл бұрын

not anyone, you have to be tall enough, or at least, strong enough.

Je vais être la vers quelle heure

tu tem a voz do narrador do fifa kkk