Thank you for the video

Great job 😊

@TellyDan

5 ай бұрын

Thank you! Cheers!

Thank you for the video. I am looking some info, how good and reliable those wooden walls to mount the 55 inch lg c3? I have a small window and I want to close it with wooden wall then mount the tv. So tv mount won’t be screwed to actual brick/concrete wall. What do you recommend for me? 2 studs where mount screw went in? Help me please

Good video, on my wall i use security bolts as the brickwork isn't that great. In the past i had a tv crash down in the middle of the night, due to regular plastic wall plugs. Now i have the metal security bolts,which are amazing. Thanks for the video, and ignore silly people in the comments, they are tough online, and cowards in person.

thanks for the video.. I have on older samsung and the mount is the same but i am afraid that the lc c3 will be higher on the wall because the holes on the tv seem alot lower and not in the middle like on the samsung... is there any way to solve this or i have to re-drill?

does it include wall bracket?

Great review! It looks easy. But than again I have never done this before. What screwdriver do you use? Mine is big and heavy and old. Merry Christmas from Sweden 🎅☃️

My question is: what about those screws down whats with them?

I'm going to mount a 48" lg oled c3 to existing bracket on wall. The instructions say to use M6 screws but doesn't say the legnth. I have 2 x 12mm M6 and 2 x 20mm M6 screws. Are these sufficient? Use the 12mm at the top & 20mm at the bottom?

God job. I have a 83“ …is the beak mount Hama Ultra-Slim TV Wandhalterung für 37"-90" god for this

Please unbox LG SC9S sound bar 0:51

Great video as always!! How many mm are the M6 screws you used?

@bregowine

5 ай бұрын

It seems they are 12mm sized ones

Hello The screw size is up to M6 but what is the length, it is 12 mm and 20 mm. I have 30 mm in my hanger, from what I see the back is 41 mm thick, will 30 mm be OK? Do I need to use a washer extension? My TV is 55C32LA vesa 300x200

Which length of M6 Screws you did use?

@abelke

6 ай бұрын

He says 15-20mm

I wanted to ask you a question please. I bought the LG c3 oled and mounted it and there’s a slight tilt downward from the top is this normal or is there an issue there? The bottom seems to be very slim to the wall but the top is a bit downward. Please help

@TellyDan

5 ай бұрын

Sounds like the bracket is just tilted slightly forwards, which is normal. You could use some spacers to bring the bottom of the tv away from the wall and make it level

What's the difference between the C3 and c3 brackets you used? Would you be able to use c2 bracket with c3?

@TellyDan

7 ай бұрын

No difference for wall mounting between the c2 and c3 really

@ArtOfTheWeld

7 ай бұрын

Thx, I used a sanus extend and tilt meant for c2, but used it for c3

May I know which tv can be mostly closed to the wall, similar to Samsung frame series? Thanks

@helderduarte213

6 ай бұрын

Lg g series

What's the dimensions of the TV

How do I do this onto a stud wall tho? The studs seem sparse

@TellyDan

28 күн бұрын

You only need to hit one stud, the others can be on board fixings

@DeeTeaDee

28 күн бұрын

@@TellyDan if it is a stud wall that divides two rooms….can the TV be installed like….INSIDE the stud wall some crafty way??? Im thick

@TellyDan

27 күн бұрын

I think it could, you'd have to make a void inside the partition

Кронштейн Hama с неудобными фиксаторами в виде винтов - это худшее, что только можно придумать! Семь потов сойдёт пока их закрутишь и то, если у вас под рукой окажется удлинитель для отвёртки!))) А снять телевизор со стены будет ну просто невозможно! Нужно брать Omnimount OC80F.2!!! Самый крутой вариант!

you didnt show the wall view u genius

i have a 77inch oled. i am afraid i will definitly need some help from another person to lift/carry/place on the mount :D

@jeremypr

Ай бұрын

first world problems.