MrMario, you probably know this by now. So i will mention this for the viewers. The 1.6 has the clock cap as well. It is located by the IDE port. They moved it and replaced it with one that doesnt fail as much as the old ones. "DO NOT REMOVE THOSE CAPS" You will kill your 1.6 box. Great videos man keep it up.

@MrMario2011

5 жыл бұрын

For sure! I have a tutorial showing how to remove the clock cap and mention that it isn't necessary for 1.6 consoles.

4 years later but I just wanted to let you know why the flux made it harder to bridge those points, it’s because flux helps join solder to the copper pads and it basically sucks it away from the board to the individual copper pad.

@MrMario2011

2 жыл бұрын

Much appreciated 😁

Already excited for part 2. I don't even own or plan to get an Xbox but I find this really entertaining

Please make sure you put electrical tape or something to keep the solder points from touching your hdd and shorting out the ide to sata adapter or it will fry your hdd and converter and please please do that cuz its free insurance against frying your stuff cuz some of the adapters have insulation where it goes into the hdd. Thanks and really enjoying your vids!! :)

Hey man! Just wanted to say thanks for making this video. I'm planning to do this mod myself and really appreciated the heads up on the IDE cable. Who knew all IDE cables weren't equal! Anyway thanks again for saving me some time and a few bucks.

@MrMario2011

6 жыл бұрын

You're welcome! I knew they were different but thought it was a recommendation to upgrade the cable, not a requirement. The original is fine for IDE drives, SATA needs that extra power from an 80 wire cable.

I just did a TSOP flash for a co-worker. I couldn't find my iron. I used a conductive pen instead. I bridged the points on a 1.0, let dry for 10 minutes. Booted up and raincoat allowed me to dump and flash the bios.

@MrMario2011

5 жыл бұрын

Nice! Good solder-free way of doing it.

A bit of a quick tip for anyone trying to do this for the first time. There is also another method of bridging the two points together without the use of solder. You can actually use some conductive paint to bridge the two solder points together and I found it to be way easier. It's also safer to do as it won't damage your Xbox if you mess up and end up breaking the solder pads on the motherboard. You can easily just wipe it off with some isopropyl alcohol and just reapply it. This second method is perfect for people who are not good at soldering such as me. I was able to flash the EvoX bios to an Xbox with this method and it was awesome. Great video man!

@Nesmaster75

Жыл бұрын

Hey PacMaster, after reading your comment, this is the route I think I'm going to try first. Could you possibly link me to what you used, or something similar? Regardless, thanks for the info! It's been years since I had to solder anything and didn't feel super confident in doing so.

@sutch2607

Жыл бұрын

@@Nesmaster75 hey, did you manage to do this method? If so I am eager to see the method or have some sort of guidance. Thanks

If your HDD dies in an unmodded xbox, you can recover. Read the EEPROM by connectng a Raspberry PI to the I2C pins of the LPC header (any version of motherboard) copy the eeprom.bin to your PC, use XboxHdM32-USB to make an lock the new drive (This will take hours). Install the new drive and you are good to go :).

@MrMario2011

3 жыл бұрын

Yep! Although I prefer a custom BIOS, at that point just drop in a new storage device and nuke.

I love your channel MrMario I’ve been non stop watching all your videos. Take Care Man Thanks For Your Amazing Content.

@MrMario2011

6 жыл бұрын

Have a great holiday!

Good job getting one with a Sammy drive, as they're the best drive with this console. The scene for the OG Xbox was THE best scene of all consoles. Homebrew and hardware mods released for it was insane. I still have my 1.0 somewhere in storage, with the capacitor removed of course.

@MrMario2011

6 жыл бұрын

I need to get back my original 1.0 and remove the clock capacitor! I would agree with it being one of the best, I didn't get to really get my hands dirty with hardware mods until 2016 and I love the freedom of information the scene has. Lots of good sources for Xbox info, and people all on board for sharing. Also still seeing active interest and development on 16 year old hardware is awesome.

@SOLiD71

6 жыл бұрын

Me too. My Samsung drive doesn't read anything and I'm also stuck with a Thompson which is still working

@mullinsjm1

6 жыл бұрын

My first Xbox had the Thomson. It went out not too long after the warranty went out. :-/ Next one had the Samsung drive.

@thatguydownthesteet

6 жыл бұрын

Who cares about the disc drive, just copy games to an upgraded hard disk

What temp should we have our iron at? I want to remove the clock cap, and want to make sure I do it correctly.

Hello, help I have a classic xbox which of the video image with some horizontal lines that jump randomly are like a kind of interference, and probe with other video and audio cables but this interference is not removed, which smd component of the board do you suggest me review?

Just fyi ide cables don't carry power just data the 40 vs 80 is just doubling wire to eliminate crosstalk between the wires so in 40 wire 1 wire per pin in 80 2 wires per pin in the xbox sata hdd's send data too fast even with a ide to sata converter so to fix that you upgrade to a 80 wire cable for fast communication between the hdd and the motherboard and with that speed come crosstalk which again is why we double to wires

@MrMario2011

6 жыл бұрын

Thanks for the insight!

@alexatkin

6 жыл бұрын

Needing an 80 pin makes no sense as the Xbox should be limited to the slower UDMA 66 transfer rates anyway. The 80 pin was for UDMA 130 as I recall.

so is that the white foam i see around the black part? How do i get this stuff off if its dried

I've done several, but ran into a snag with a v1.0 with non-winbond chip (Hynix). Ran bios checker and points were soldered correctly. When trying to write the EvoX bios, it sticks on Erasing. No status bar just sits there for a while. Any ideas?

quick tip when soldering capacitors like that, just try and hit both points with the tip. or go back and forth quickly between them. much easier than trying to do one at a time and wiggle little by little.

If i have the hdd on error 16, can i join these soldering points to run from dvd?

Hi Mario, does this video show me how to take a stock xbox and install a mod chip and install the firmware to run the stored games from the dash.? I was looking to use aladin and cerbios...though I'm confused as to whats what...is cerbios the software that let's you run the games from the harddrive

i dont know if youll read this but does the bootloop always mean that the cap is busted ? when i was little i sticked a paperclip in the controller port and since then my box only booted every 1000th time

So... regarding that bloody IDE cable... I did not know a 40 pin cable might not be efficient for some hard drives. I guess I KINDA lucked out by accidentally breaking the old cable. One of the plastic clips snapped right off when I tried to unplug the cable from the PATA/SATA adaptor. So brittle. Anywho, currently I'm using a thin 80 pin cable which I had to twist around to make it fit. Any idea if there are any people that sell custom 80-pin IDE cables which are exactly like the original Xbox ones?

i recently messed with my dashboard, now i get error code 14. Should i do TSOP to fix it ?

Do you have a link to the bios checker? Thanks!

I’ve been following you guide to mod my Xbox. I can’t find the bios check. Is it possible for you to link an iso?

Same but I softmodded my Xbox when I was young and I'm just gonna do my first RGH ever this coming week when the coolrunner rev c and j runner programmer comes in. Gonna attempt RGH 1.2 on a Falcon.

Mrmario i really need help i have done tsop with hexen 2021 and then the xbox won't boot the dash but when i put hexen disc it work anyways i installed unlashx from hexen disc and now i can't boot both of dash and hexen😢

I had to use Composite Video with my v1.2 winbond TSOP mod. When using component it would not show up and reboot.

HDD in my xbox died. Can I buy a softmoded one with different key, TSOP my xbox and use it with this HDD?

hi what is a good site for finding modding and repair guides for OG xbox, dreamcast, wii, 360, ?

i know this is old but i bought the Hard drive,ribbon and ide to sata adapter but mr mario says set the drive to master. what pins set it to master?

@MrMario2011

6 жыл бұрын

Look for the jumper on the drive boards.

If I have an xbox 1.0, should I put 256 or 512 bios?

Hi MrMario, i want to perform TSOP flash in one of my xbox but unfortunatelly i dont have compatible usb drive, i was also trying hotswap technique but my PC didnt detect xbox HDD, but i have another xbox with aladdin chip. Can I install aladdin in the xbox i want to mod, just for the moment, to start TSOP app from dvd, perform TSOP and than remove aladdin and just work with TSOPed system? what do you think?

Hello, I have an inquiry. I need a way to install custom bios on Aladdin Virgin, my 1.6 device in order to be able to play the Xbox without a DVD drive

After trying to do this and the clock capacitor my Xbox won't turn on the fan tries to start but no lights or anything plz help

I screwed my attempt to bridge it. So I ended up bending the end of a wire 90 degrees and using that to bridge it. Was infinitely much easier to do it this way for me. Managed to successfully TSOP flash my 1.0.

@MrMario2011

5 жыл бұрын

I had to do that once, used an alternate point and a small piece of wire.

@devilinthewoods3809

5 жыл бұрын

@@MrMario2011 I thought I screwed it up because I had trouble getting the solder to stick. Got it working at least. Now comes the fun part of getting everything up and running. Been a while and have forgotten how to add games to the new hard drive. That and emulators aren't being listed on the menu.

question, when you tsop flash ,does that bypass the need to do the homeade tool device thing, to read and save the custom hd id key mated to the motherboard, basically, does that allow you to do everything without manually having to lock and unlock drives using the custom key everytime you change out a part ? o yea , my dvd drive went, if you tsop , would a regular pc drive do anything

@MrMario2011

6 жыл бұрын

All you need to do is softmod your Xbox prior to flashing BIOS, no need to lock or unlock hard drives after that. You have to have a working DVD drive if you follow what I did here.

My xbox origenal is loading problem Can u gave the idea how it solve

Oh and btw use a solder sucker for desoldering its much easier!

@hamiltonbros2005

6 жыл бұрын

Cortex is GEOMETRY DASH

@felixokeefe

6 жыл бұрын

That and get a chunkier tip on that soldering iron. Or better yet get a good soldering iron. The TS-100 is a good bet

@felixokeefe

6 жыл бұрын

That said I did do all the mods on my old Xbox years ago with a 15 watt antec soldering iron including upgrading the RAM to 128MB. Desoldered the chips from a donor board with a flame pencil

@teh_supar_hackr

6 жыл бұрын

That what I used, before mine broke and was forced to order another one. I also heard that apparently that solder wick is better, but I can use that for crap because of how it never removes it, and feels way more troublesome than a solder sucker.

@bluezmodz

2 жыл бұрын

Thanks for the information

Can I get a link to the tsop guide please

I was changing the thermal grease on my og xbox and noticed the mobo was signed, I didn't find any info on why but just as I went to rewatch this video I noticed yours is signed too, any idea on why?

@MrMario2011

6 жыл бұрын

Internal notes of some kind, possibly when testing the hardware quickly before packaging it all up.

i can't get this to work on my xbox all it tell me is it not a xbox game or dvd movie or a music cd

hey mario - i have the same happend to me - it lifted the pad by attempting the TSOP solder. Can you tell me the alternative solder point? like you did in the video @13:14 sek

@MrMario2011

6 жыл бұрын

I looked up Xbox TSOP alternative points. Plenty of visual guides for that

Merry Christmas and happy new year;)

@knownbarkert6153

6 жыл бұрын

Kevin Twiner it’s sad that no one besides me liked this comment. If it was a smart add comment it have 1000 likes. 😑

I have just TSOP'd my XBOX 1.0 this evening, as it was already softmodded, it made the process much easier. To be fair, I did it with this machine as I wanted a nice stock machine which had the original dashboard, but the reassurance of being able to swap drives etc out if one died, so there is no restrictions, but keeping the Microsoft Dash on the hard drive. :D

@dangerousdeo5113

6 ай бұрын

@@DylanClements98 It was a Evo BIOS selected from the Slayers Boot CD, but I do not remember which one it was. I know it was a older version of it. :)

got a used xbox from eBay a couple months back. got for cheap because they said disc drive won't open, but it just intermittently gets stuck, replaced band on disc drive and open/closes fine. so considering its this old and hasn't died should I worry about replacing the clock capacitor? I don't have a soldering iron nor do I wanna mess with one (I'm visually impaired), and I don't wanna risk pulling it out and messing anything up.

@MrMario2011

3 жыл бұрын

ALWAYS. It isn't a matter of if it will leak, it's a matter of when. If left leaked out long enough, it WILL cause damage to your console.

Fun fact the original Xbox is a custom Pentium PC develop by the DirectX team in Microsoft and later called it the Xbox

@MrMario2011

6 жыл бұрын

Yep! Read about that 😁

@thepoliticalstartrek

6 жыл бұрын

Captain Scorch217 It is actually a modified p3 based Celeron with some cache. For desoldering you can buy a cheap spring loaded device.

@PicsnMotion

6 жыл бұрын

The good ole Celemine!

@kingmixed8663

6 жыл бұрын

Captain Scorch217 did you know the original Xbox was going to be called the directxbox but it didn't sound as catchy

@CaptainScorch217

6 жыл бұрын

tmg-3 life yep I'm aware of that and didn't mention it because it's not catchy

Please, I need more specific information as to where to solder the wire.

I got hold of Xbox Crystal 2 days ago. Does it work on it ? I don't know what version my has I haven't open it and haven't mod it yet

@MrMario2011

3 жыл бұрын

Only if it's an applicable version.

Nice vid but I had to laugh when you said the SATA drive wasn't working because it didn't have enough power from the 40 wire ide cable. :) Fun to watch.

does the console need to be softmodded first before this mod can be done? i ask cause from the sound of it, this acts like a modchip without a modchip, allowing the ability to run the DVD's

@MrMario2011

6 жыл бұрын

That's exactly what it is, and yes you have to softmod before flashing BIOS

Do you have to soft mod first or you can do TSOP even if you didn't do soft?

I've been able to replace the Xbox clock capacitor with some Panasonic super capacitors for camera flashes. They've been able to keep the clock time for at least a month (probably much longer) without issue.

@MrMario2011

6 жыл бұрын

Good to know! I don't replace it as a modified dashboard will set the clock to sometime in 2007, I've also noticed if I have the console hooked up to my network it will just grab the date that way as well. Sometimes I might have to edit the year or adjust the time a bit, but it normally gets the date mostly correct :p

@UpTriTie

5 жыл бұрын

Can you modify a battery such as a cr2032 to supply power for the time?

Hi MrMario. I've heard the words 'locking' and 'unlocking' thrown around a lot when it comes to replacing an original xbox hard drive. What exactly is a locked hard drive? Is the factory installed HD paired with the the original xbox or motherboard in some way? Is it something unique Microsoft only did with the original xbox HDs?

@meetoo594

5 жыл бұрын

Pretty much what you said, the drive and motherboard have a unique matching key that `unlocks` the drive at boot if the keys match. If the keys dont match it throws a `your xbox needs servicing` message up and wont do anything else. The modchip in mine just bypasses the check so you can use any drive you like.

thinking back microsoft could have put a CMOS battery port in the rear of the console, and had the user put the battery into the system when they got it.

Hello! Ii have a original Xbox and ii want to softmode it to! Where ii can find the program you insert inside the console? Hexen

@MrMario2011

4 жыл бұрын

Many tutorials up on my channel if you search.

Hi Mr. Mario. Great video. For someone already softmodded, can you sum up some of the benefits of TSOP? If I understand correctly, ISO reading from HDD is one advantage (no dealing with long file names). What else? Does anyone have suggestions for 80-wire cables that are better "Xbox" configured than the standard computer ones? It seems you have to fold the cables various times due to the spacing between connectors, On an Xbox, does it matter which end goes to the motherboard? Thanks!

@MrMario2011

6 жыл бұрын

In short you get the benefits of a modchip without actually obtaining and installing a chip itself. You cannot read ISO files on an Xbox. I linked in the description the 80-wire IDE cable I used that works in part 2, folding it is inevitable.

I didn`t read thru all the comments so this may have been mentioned. I came across the issue with it not moving over to advance in Gentoox as well. Ended up being because I was using a third party controller. Only Microsoft OEM controllers work to move in Gentoox.

@MrMario2011

5 жыл бұрын

Correct!

I've used a 1/16" (about 2mm) segment of a tiny wire strand to bridge the points, trying to glob solder across has always been challenging

@MrMario2011

10 ай бұрын

Using a small bit of wire is a good move!

can you do this to an xbox 360e 500gb hd and upgrade hd to 1tb

So what stuff do I have to put in between the two points?

@MrMario2011

6 жыл бұрын

If you're removing the clock like I did, just a soldering iron and some solder. All parts I use are in the description.

Could the optical drive also be replaced?

@MrMario2011

6 жыл бұрын

Yes

whats that mini ps3 and mini xbox thing under the screen

@MrMario2011

2 жыл бұрын

Gift card holders GameStop used to sell!

Really love those videos man! I'm really consider buying and modding original Xbox. I want to ask you one thing. I've heard of 128 mb RAM and CPU upgrades mods. Will you consider on doing those?

Did you lift the R7D1 pad then connects to via?

@MrMario2011

4 жыл бұрын

I don't recall which exact one.

Is there a certain way to play backups? Used XISO to convert everything to iso format. I used img burn to burn the isos to a dvd (tried both dvd-r and DVD+r) and when the Xbox goes to load up the disc it say disc may be dirty or damaged. Not sure what i did wrong. Im softmoded so it should be good to go.

@MrMario2011

5 жыл бұрын

Transfer to the hard drive, it's recommended to not play burned discs.

@Gmen2010champs

5 жыл бұрын

@@MrMario2011 Alright man. I still have the Original hard drive in there at the moment. Do you have a video or can you recommend a video on how to clone the original hard drive to a new hard drive? Ive never done any soldering before and its a bit scary to me lol Thanks man!

I'm having trouble flashing the bios I've tried both hexen 2017 and 2018, I get to gentoox and it counts down to boot from disc and won't let me choose another option, I have a winbond chip on a 1.4/1.5 xbox, what boot disc is it waiting for?

@MrMario2011

4 жыл бұрын

Try using a legit controller, not third party.

@darthpceptimus

4 жыл бұрын

@@MrMario2011 I tried 2, original and s controller :-(

Figure it out !!! Wait, wrong channel. Sorry

@MrMario2011

5 жыл бұрын

Hello, this is Adam Koralik from Figure It Out Productions, the following video is a video of some kind and I hope you enjoy it.

Hey how are you ? Question next time you try a tsop can you try to use a rear window defogger kit to draw a line across the tsop points instead of solder and let me know how it goes its conductive and it shouldn't wipe officer it dries i thought of this after I did my solder points its a pain when you lift the pads off the board lol😆.

Quick question. could this be used if a non softmodded xbox drive is dead (keep getting error 07)

@MrMario2011

6 жыл бұрын

Nope, you need to get the console up and running. It has to be softmodded so you can run the homebrew needed to flash.

@westerlycash34

6 жыл бұрын

If I soft mod another Xbox and unlock the drive can I drop that drive in a Xbox with a dead drive (not softmodded)

hello mr mario, will all sort of 3,5 hdd work on the xbox or are their any requirements?

@MrMario2011

6 жыл бұрын

All sorts.

Electrolytic fluid is what caps actually contain and yes, it’s got a low Ph.

Mr. Mario, great video. So you have to do the TSOP Mod in order to switch to a SATA hard drive? For desoldering. I like using desoldering braid, worked well.

@MrMario2011

6 жыл бұрын

Nope, you can upgrade to SATA on a softmodded console as well, but you need to go through the process of using Chimp and then locking the drive.

Hey Mario its a Great video but i had question some people said i need to remove the bridged point from soldering after done the tsop to avoid damaging the system is this true? I'm new to xbox modding

@MrMario2011

Жыл бұрын

Nope. All removing the bridged point does is disable write access.

@mrzero3082

Жыл бұрын

@@MrMario2011 so its safe it keep the tow pointe bridged after TSOP and no need to remove it

Hoping someone can help. I currently have a mod chip and a 80GB HDD. I'm going to be putting a 500GB drive in but what do I need to do to reload the operating system and set up the drive correctly? Thanks all :)

@Me-dc7mq

4 жыл бұрын

Updated version of hexen 2019 and build a drive from there

If I have a stock xbox that is not soft modded and was never opened, should I remove the clock capicitor to prevent damage? Will it affect normal play?

@MrMario2011

6 жыл бұрын

Always remove if the console isn't a 1.6, it won't affect normal use aside from having to set the clock on boot.

@patrolzero1

6 жыл бұрын

MrMario2011 OK, thanks, I was going back and forth. I have to reset the clock every time I boot as it is, so I'm guessing it has leaked already. Thanks again

At 14:16 it should be noted when you said you lifted one of the MB pads and had to put that wire there. Since you lifted that pad on the MB if you tried to turn the Xbox on it would have FRAGED (Flashing Red and Green Light) as one of my first attempts at soldering the two points on an Xbox I ended up ripping one of the pads off the MB and when I tried to turn on the system it FRAGed. But once I wired the alternative points it was saved. Just figured I should point that out.

Can u do a ram upgrade video

Thank you for your videos

You have a Samsung 605B drive in that console. I know you got your start flashing 360 FW. Not many people knew this but C4E actually wrote CFW for the original Xbox as well. If you decide to do that to this one(although not very necessary anymore), the guides can be hard to find now that XS has disappeared. However, I still have one if you are interested in it.

@alynicholls3230

4 жыл бұрын

if you can run burned disks can you inject the softmod save files into a disk, then run them that way?.

Hey +MrMario2011 I had a question for you, I am going to attempt to do this mod very soon. Do you have a link to the website that you're using for the modification? I have an Original Xbox that is similar to yours ( its an ST TSOP ), but I can tell where the RD710 pad is...

@MrMario2011

6 жыл бұрын

Check out the description, I credited Slot1Gamer for his super well done TSOP tutorial, which is what I used.

@stopthrm

6 жыл бұрын

Ah, Perfect. Thank you. I believe that I have a 1.1 since one of the south super caps wasn't included from the factory and the GPU heatsink is the later version. R7D3 seems to be the one to bridge!

Lets see if we can do this properly lol. If you dont have desolder tools just heat both legs at same time and gravity will make the work for you (maybe you will need to use your hard to remove the cap if the legs are bent or something) doing one leg at the time like this just increase the risk of dmg to the solder pads

I took apart an Xbox that had never been apart before and it also had a hard drive screw that was completely loose from the mount.

@alynicholls3230

4 жыл бұрын

yes you do see it sometimes, iv'e seen a few its always the same screw too. must be the vibration from the HDD.

Forgive me for asking this on such an old video, but after soldering and soft-modding the xbox, do you remove the solders for the tsop ?

@MrMario2011

3 жыл бұрын

You can, but I see no reason to unless you're that concerned with accidentally reflashing your BIOS.

@CADeathstar

3 жыл бұрын

@@MrMario2011 Forgive the delayed response. I just wanted to be sure as for most instructions vids, generally see others going back and removing the solders to "avoid damaging the device". I thank you many sir *bows*

Hi! Great video. I'm just thinking about getting an original Xbox to mod, and I'd like to have your opinion on a few things since your advice has helped me in the past. Which revision of the Xbox should I try to look for? Can I replace the clock capacitor with a new one from a good brand like Nichikon to retain original functionality? Or is it possible to replace the capacitor with a non-electrolytic type of capacitor? And lastly, which mod chip do you think I should get for hardmodding the console? I saw your video on the X3 being very expensive, so what would be a better option? Thanks a bunch.

@MrMario2011

5 жыл бұрын

1.0-1.5 revision. You can replace the clock capacitor, but no real need to. If you go with a 1.0-1.5 revision, you can enable write access to the TSOP flash and flash a custom BIOS directly to the console. No need for a chip at that point.

@rhonen1014

5 жыл бұрын

@@MrMario2011 Awesome, thank you for the quick reply! I found a local seller selling a v1.0 revision with a Samsung drive swapped in already for only 25€, but someone contacted them before me. I'll see if I can get my hands on it. Already ordered the stuff I need to upgrade the hard drive too

@rhonen1014

5 жыл бұрын

I ended up getting a filthy V1.4/V1.5 with a Thompson drive, Winbond flash and an exploded clock capacitor. Why do I always have such bad luck with disc drives?

you wernt pushing both side of the ide cable in all the way

how do you know what size bios to flash?

@MrMario2011

4 жыл бұрын

1.0 and 1.1 have 1 MB TSOP, 1.2-1.5 can only take 256 KB

@alynicholls3230

4 жыл бұрын

@@MrMario2011 mines a 1.1 with an st 1mb chip, do i have to flas a mb bios file?, of will it take a 256k file and quad it up to fill the chip?. i was going to flash a 1mb x2 5035 bios, but if its true about 256k files then i may use m8 like you did then if i have problems i can 3 wire trick it and use another bank.

Why not replace the clock cap with a different brand or type of cap that has the same microfarret???

@MrMario2011

5 жыл бұрын

Not worth it when it only holds time for a few minutes, nowhere close to something like a CMOS battery.

IDE cables 80 pin from old pc are excellent to keep tight. Not aftermarket!

Great video! What did you use to clean the board after you remove the capacitor?

@MrMario2011

6 жыл бұрын

99% isopropyl alcohol with q tips

Use desolder braid, or a hot air rework station for the clock capacitor :)

@MrMario2011

3 жыл бұрын

Many great options!

I chose the Evox bios for my TSOP because it allowed me to put a dope McDonalds i'm lovin it graphic in the top left while the system boots. I have another Xbox that is softmodded because the darn thing is a 1.6 so TSOP is not possible.

26:10 OH sweet :D You CAN use a SATA to IDE board.. I've been looking for a large IDE HDD for the longest time because I've thought i had to use a IDE drive :S

@RealGengarTV

6 жыл бұрын

Well SHIT... Never mind my bollocks! This mod doesn't really work 100% :P Looking forward to your next installment because i want a larger drive in my hardmoded xbox

@MrMario2011

6 жыл бұрын

Stay tuned, I can tell you it is all working as I've been playing on it 😁

@RealGengarTV

6 жыл бұрын

Sweet @MrMario2011 My body is Regi

@RealGengarTV

6 жыл бұрын

Hah.. nerdy Nintendo/Pokemon memes :3 I'm sure you approve

got a 2001 model xbox, clock capacitor was still there, in pristine condition, except one leg was broke off and it was practically laying on its side. im assuming since the connection was broke off, the capacitor was never working in the first place, thus it never leaked. lucky me i guess. its gone now

@MrMario2011

Жыл бұрын

LOL, super lucky and funny find.

Maybe use some lead next time you intend to change a cap... makes it easier to get old spots fluid again! 😉 'We got it! We got it! We got it!' You don't do that soooo often, do you (no pun intended)? 😄

Easiest way to check if you have a v1.1 or v1.2 : ATX style power supply connector on v1.2 ;)

*Cool Video😎

Quick question my dude can you replace the cap that leaks? Like with a new one I'm sure you can but.... Microsoft

@MrMario2011

2 жыл бұрын

Yep! You can and should replace other caps that leak, but the clock capacitor isn't needed.

@photondebuger45

2 жыл бұрын

@@MrMario2011 really?? It's not needed? It really like only runs the clock on the Xbox? Seems a bit excessive where just the battery would help it no

NEVER EVER Pry on the cables themselves to disconnect them,get pliers and disconnect them by holding the edges of the plastic and pulling up. You can rip those cables by disconnecting them like that.

you have dog my friend use to have. he passed away few years ago

I would love to mod my Xbox, just with a simple softmod :D But the thing is I wish that the softmod can be removed easily and have it not be permanent on the hard drive but instead can be easily removed going back to the systems default state like the ps2 can, I don't know why, it just gives you peace of mind that you can remove the softmod easily and have it as if it was never soft modded, I'm weird :P Oh well, I'll still do it Great video dude! I'm loving the videos on ps2 and Xbox! Two of the best systems of all time :D

@MrMario2011

6 жыл бұрын

You could uninstall the softmod and then delete the saves. I don't see a need now to have a completely stock Xbox, mainly because if needed you could boot into MS Dashboard at any point.

@TheChaoticWolf

6 жыл бұрын

+MrMario2011 yeah that's true, but I meant like being completely back to its original state, but hey it's not a big deal, I'll be planning to soft mod it anyway, keep up the videos bro, they're really fun to watch!

@djdonbentley2141

6 жыл бұрын

your right, i like doing the softmod via pc , and ndure , also i get to have that added protection of the eeprom or hdd key right there slipstreamed on the disk, definately alot more added work , but almost ensures unlimited access to your xbox. no matter modchip or not

@thePiratePimp

6 жыл бұрын

Use the Rocky5 softmod and you can unsoftmod your Xbox anytime you like.

@Dataanti

6 жыл бұрын

the soft mod i use, cant remember what it is, allows me to boot into the og xbox OS instead, if thats what you are looking for

Can this be dome to a 1.6v xbox?

@iggybrah

2 жыл бұрын

Tsop flash i mean

@MrMario2011

2 жыл бұрын

1.6 cannot be TSOP flashed.