This was exactly what I was looking for. Thanks for this! 😀

Crossed my mind, these scooters are getting a bad rep. Yet I saw a man in his 80's in the middle of the road on a mobility scooter and nobody bothered him. I need a mobility scooter. Four wheels. Comfy seat. Sabvoton or phaserunner strapped to it. A dragster style wheelie-bar and parachute on the back.

@andykirby

2 жыл бұрын

🤣🤣 there's some really cool modern low profile mobility scooters around at the moment just ripe for modding, I might have to do one as a project.

@philkenseben7

Ай бұрын

Dude I’m 47 and the can be fun to ride

Nice job. I might do this to one of my scooters when it dies

Kool, I have to replace some wires on mine too. I just need to remember whats what lol. Wish me luck on my repairs.

Great work Andy 👌 , I got both my boys the G Booster scooter I was on it as dads do had to have a wee shot I came off k.o concussion for a week ( I have been off work for 4 weeks so far still not right ( landed 10half stone onto the head ) please take care on them bud , my sons now have a full motorbike helmets on 🤦‍♂️

@dathim8300

2 жыл бұрын

G boosters are dangerous pal known for it

Ah you make the wiring look much easier haha. I did a little wiring repair on my kugoo kirin m4 pro 500watt. The motor wires were shorting out, acting as a phased brake with the scooter on or off. So. I ripped out the LED side lights because that shorted out from the snow last year. Then heat shrinked the motor connectors where it was shorting out. Put it all back together. And now my tail lights are not working. Brake lights work. It's a wire mess cramped in a tiny little space. I don't know what wire is what haha. I just left it and use a rechargeable bicycle tail light accessory.

@zigzagtoes

11 ай бұрын

U think thats cramped, wait til u try adding more wires such as indicators and a high beam front light 🤣 best thing i can suggest, is disconnect battery, then rewire using labels on the wires, where the wires aren't using connectors add ur own (or solder n shrinkwrap). If not sure what the wires do, just follow them to see where they go. Only attempt if you are somewhat ok with rewiring.

Interesting what you can do with these scooters. The motors can take quite a bit more than what they are rated at especially for a short distance. Great job.

@andykirby

2 жыл бұрын

Thanks David, yeah these hub motors always surprise me! If all you care about is short bursts they can handle loads more.

I have the same scooter. I found on the bogist website they have a 48v 20amp battery upgrade for sale.there wasnt much info onnit soni was wonderingnif i buy it ia there anything else i need and would it improve my speed/ acceleration performance and distance? Allso where can i purchase the new phase controler box you bought, and sorry one more thing how do i remove the speed limiter,

Great stuff Andy 👍👍

About how fast was it going and what distance can it go on a full charge? I just bought a low end e scooter and will probably be looking at modding it.

I own a bogist c1 pro and wondered if it was possible to upgrade the battery/motor/controller if so do you have any advice on what battery I could use and what parts I would need to complete the upgrade as I'm a little unsure on everything I would need. Thanks

Wicked tune, I love me some DNB 😎

Could you explain please, how to unmount rear wheel without breaking the wire? Where is rear wheel wire put?

Great vid sir

Awesome man 😁👍

Yes Andy I have been waighting for this for a while watching it as I'm typing that hyped up abowt it

Very nice thanks mate.

@andykirby

2 жыл бұрын

Your welcome mate 👍🏻

We're from the same area I hope to see you wizzing round on that thing 😂

Awesome video and thank you for sharing your tips 👍👍💚

very intersting. Would you maybe consider doing a beginner tutorial how an e-scooter works and how to know when a batteri is powerful or not ? I'm a beginner and really want to learn this stuff.

@deathbydeviceable

9 ай бұрын

Just stick to name branded things. Never get anything you haven't done research on. I got the ninebot g2 and I'm happy with it. Hopefully mymax mods will do what they did with the first one where we can upgrade that model

@SouthernBoy337

7 ай бұрын

Agreed, I have a small chassis scooter and I would love to swap out the controller like this and add a bigger or external battery pack.

Do you know if a eway-3045 e-scooter will be able to be tuned from 20km/h to 25km/t without hurting/destroying the battery?

That's risky but what the hell.... Why not if it was already blown up. LoL Great job..... 😁

Good stuff Andy! one quick question: i just got the Bogist C1 but I´ve noticed the battery might be getting some damage because of rough terrain, any suggestions on how to fix it in position?

@hellex98

2 жыл бұрын

I've noticed that aswell ,didn't help with the pothole I hit that also took my kick stand clean off ,but is rips gets you where you need ,I'd just not ride out in wet weather

Good day, Andy my friend you need to get a hold of these: Anti Spark Connector Male/Female XT90-S (Upgrading version of XT90) Working current capacity: 90A Peak current capacity: 120A Banana connector diameter: 4.5mm

@oculesfawkes9474

2 жыл бұрын

not just about anti spark LOL voltage etc has to match or it fry everything. kind same when you. link up battery's together. to make a bigger one all has be same numbers

Hello Andy! Which parts are used for all of this?

Looks like a lot of fun, it'll be interesting to see how long it lasts with your throttle action! ;-)

@andykirby

2 жыл бұрын

Haha, these hubs are pretty resilient as long as you don't do extended runs uphill at full throttle it should be fine. I've never burnt a motor believe it or not!😅

@leotyler605

2 жыл бұрын

just 3d print a mill trim unber the scooter make in deeper battery will fit

i have this bogist c1 pro scooter but i cannot mount the seat back. two scew holes are empy and the other 2 are with a metal which is blocking the scew. how can i fix this? i want to mount the seat

by eck she was shifting, that looks a lot of fun now

Hi what controller you are using in this e-scouter? Can you post a link?

i have the same re-badge scooter and thinking of a way to replace the controller. i hate the fact it has a built in cruise control i want removed. but doing so would make the lcd on the stem useless. is there any chance you still have this busted controller id love to peek inside it

Hi, thanx for the nice video but it would also be nice if U can also put parts list, thank you

I want to know how to make the wheel start rolling as soon as I press the throttle instead of having to get the scooter rolling before the motor will engage. Can that be disengaged? If so, how?

Great tear down!!! 👍👍👍 And build back up. I’ve just got the Emanba L-12 Pro as my first e-scooter and wondering if anyone has below info please??? Hey friends. I hope you are well!!! 🙏🙏🙏 Does anyone have the manual for the TF-191 NFC controller??? Finding it hard to find details as it seems new out??? Found generic manual for similar controller but the numbers don’t add up. Any tips for setting up the scooter first time regarding bolts and screws??? Should I use locktite on bolts u know i wont need access too??? Blue locktite so it can be undone with manual tools with a bit of force. Keep at the great reviews!!! 😃😃😃💪💪💪 Best regards, Scott. ✌️🙏✌️

Could do with help on my scooter. Do I have to have a lcd screen. Can I not just hock the throttle and brake up to the controller or them 5 wires coming off it to make my scooter work. Or do I have to run it though a on&off lcd or obo 1st . Help

so what battery did u pit in it? :p

What wire you need to cut to have no limit speed? Ive a vMax R25. Thanks!

@FrugalPCOG

4 ай бұрын

Dark blue. On some it's bright blue. Regardless, if you have a blue wire.. that's probably it. Recommend you put an on off switch and run with it on normally and use switch as temp turbo.

Wondered could you help me and let me know where I can get a motor control unit for a vsett 8 electric scooter as I believe my one has blown

Just make sure the scooter is up to speed before you apply power rather than launching it off the line and the motor should take it.

I’m looking to upgrade this scooter possibly adding a bigger battery. Do you think it would be possible to add a second motor on the front and connect a second controller inside to operate the front motor. How large of a battery can I fit?

Any upgrade ideas for a blaze 600w scooter?

HI Andy. Nice job on that scooter. I'm running a sabvoton 72100 on a mid drive and the motor keeps ticking, sometimes a bit violently. Any idea what's wrong with it?

@dillonseeney3149

2 жыл бұрын

That sounds like it couild be the Bering are worn out so it can vibrate and Tik/ rub ore it couild be a simple little pease of mettle ore something stuck to the magnet on the motter

@colinriches1519

2 жыл бұрын

@@dillonseeney3149 Thanks for the suggestion, but I know it's not mechanical because I hooked the motor up to the old controller to check and it runs really smooth on that one.

@TimpBizkit

2 жыл бұрын

@@colinriches1519 it could be the current limiter if you are in too high a gear. My bafang motor will do that if you try and launch in the wrong gear, but I rarely hear it because I am quite good with my gear selection. There is also another low battery warning that will cause the controller to send a vibration signal through the motor which you can feel. I wonder how many people buy a Bafang BBS02B, mash it along like a noob by pinning the throttle at 50 rpm and then complain it gets too hot.

@colinriches1519

2 жыл бұрын

@@TimpBizkit Thank you. I should have said it's not a geared motor. Drive sprocket is 11t and rear is 56t. The motor is rated at 72v 3kw and spins at 6000 rpm, but I want to run it at 100 amps if the motor wires can handle the current. Operating at 40 amps (10amps lower than the previous set up) it still does it, so I don't think it's that. I've recently heard that the controller I bought is only meant for hub motors that spin no more than 1000 rpm, being a newbie I'm not sure if that's why. I've got so much to learn.

How can you loosen the front shock absorber?

Hello, Andy! I have a mototech 48v 2000w scooter I wanna put one of those phaserunners on but I can't find one. Can you give me a link to buy one?

What is the controller you are using and Warehouse can I get it as the site link you have in description is broken or not working

lovely video's man ! , should a 4amp charger charge the std battery twice as fast you think?

is it confusing to program it? i dont even know hat that means really but i fucke3d my bogist m5pro yesterday and its giving me an e3 error and i think it means the controller is nakerd. i dont want to just put it back in the box and forget about itand im glad iv seen this video but i dont really want to attempt it if its too complicated for a novice.

It was probably center negative always check, as for battery compartment just 3d print a 10mm extenter and buy another. Seal

I just learned what cockney speak means or is yesterday, so when i heard u say its got some beans i definitely had a lil cheese 😉✌️

Hi Andy. Can you help... I have a Thorpe 30 e scooter. How do I pass the speed controller to get more speed. There are 3 thick wires green red and blue. And 5 thinner wires. Red black blue green and yellow

I have an Evercross H9 scooter with the new dash, 48 volt 800 watt motor 14aH battery and stock controller. and i realized they lie and say 28 mph.. by GPS is does 25 mph at best and i wanted to know if i can use maybe a 1000 watt or 1200 watt controller to give it some more speed..

You should get an euc. I got a veteran Sherman a couple of months ago and it’s awesome. Also bought a mountain bike recently after watching your vids but riding it feels so dated and clunky compared to my euc now lol

@Crosshatch1212

2 жыл бұрын

I just recently got an e bike frst day out im hitting the cycle path that goes past my house at the back good 4 bike width if not more and about 30ml long goes right out to the sea side in Edinburgh. I thought I was the bees going along at warp speed of 20,ml n hr when this youngster goes past me like a bullet standing up on a scoot the bck wheel was all I cld see as it was that fat .lol what a time for youngster have good fun oh get in Andy discord im an amputee and had a few concerns about pedal height etc and was bying a super 73 that someone pointed out wld be useless if I ran out of batt as there horrendous to cycle as there pedals are goofy .got a good tip on the bike I got so it defiantly is a handy place .

Dope! 🤙

So whats the new max speed of that scoot

How do I upgrade my 60v 30amp tifgalop scooter to a 72 v 40amp?

Is the little blue wire the speed limiter? I heard that you should cut the little blue wire to remove the limitation

How do u connect your laptop to the controlla as need to adjust mine

Could you tell which wire i Need to cut? 😘 i have e-kick city from 'biltema '

Was gonna change my controller but was scared on heating issues on the motor

Evercross H5 vid would be nice!

@rainsdaniel77

Жыл бұрын

I second this. Please show us how to make more speed and torque on the evercross h5. They advertise 800w but the owners manual says 500w. It would be great to actually get the full 800w of power that it can handle

how much did you get it up to?

Has anyone figured out the way to change it from km/h to mph? It has the option on the screen… also has the cruise control but I don’t know how to activate it.

Hi mate I have a kugoo g booster I want to upgrade the controller but I have no idea where to start are you able to recommend a controller that would work please

😉 *buena información amigo* 👍 y sin dañar al scooter 😎 Podrías decirlo en español latino Para poder entender mejor

What they like these scooters? Seem decent for the price, what’s minimum power I’d need for grass and slight hills? 800w?

@rwosu

2 жыл бұрын

800w will do it but if you want to have more fun you will want 1500w minimum

@lassydogpie5390

2 жыл бұрын

@@rwosu cheers, any recommendations? I’m in uk

Hi Andy any idea how to derestrict the pure 2nd generation scooter

Will this work on a e202 scooter 500 watt motor looks like the scooter u got

I have an 800 watt Evercross H9 scooter with the 14.4aH battery, can I put in a 1000 watt controller to get the 200 watts more? Maybe just like 5 mph more without blowing the motor ??? And will it work with my display on the H9 instead of that circular Chinese style? Or will I need to replace it all?

Do you have the direct link to the controller I'm running a h6 model scooter

Do you you know if a 4amp charger would halve the charging time?

@Motorizedstuff

2 жыл бұрын

If you normal charger is 2 amps yeah

Hello I was wondering how I would be able to get in touch with as u have niu that I want to upgrade the controller

Hi Andy would a phase runner work on a 48V 18.5Ah battery and single 800w motor would it run ok aswell thanks for ur time keep up the amazing work

Is this possible on kukirin g2 max? 1000w motor

What s the best way to make my kugoo g booster faster the motors are set at 800w per motor so total of 1600w but the motors they say are peak 1200 each wheel so 2400w will more watts make it faster ?

@lel9460

2 жыл бұрын

Won't go faster except you up the voltage since there is no gearing to change since you're using hubmotors

@18ct

2 жыл бұрын

I'm not familiar with your scooter, but upping voltage and/ or amperage will result in greater output wattage. More watts, generally results in more power and speed. But you need to take many factors into account. Such as: 1. Can you battery supply the increased output SAFELY? Li-on and Li-po need to be treat with respect. They can explode causing fire and serious injury. 2. what is your motor rated & will it overheat? Usually you can put double rated wattage through them for SHORT BURSTS only. 3. Will your controller be able to handle it & what voltage are the internal mosfets rated at? 4. Will your wiring and connectors be up to the task of handling the increased current? Many things to consider. Hope this helps you.

@supraanon1914

2 жыл бұрын

@@18ct thanks its the kugoo g booster it says on internet there 1200w each motor as there’s 2 but there only 800w running to them from the controller I thought maybe a new controller that will run two motors and add maybe a remote control car battery that’s lipo 9v I think they are

Whats the software u was using?

Hallo from Germany Great Video Mfg TK

Hello, and thank you for the explanation. I have a question, please, can I connect two motors to an electric scooter on one microcontroller? Thank you

@andykirby

2 жыл бұрын

No is the simple answer, for AC motors and contollers you need one per motor.

@thepunishersamir4990

2 жыл бұрын

@@andykirby I own a Pogest scooter. If I want to add a motor in the front, what will I need? Knowing that I have a 48-volt 30-amp battery, can I connect them to the handle of one extra bed? Thank you

Hiya. Are you able to derestrict the PURE AIR PRO LR ?? Many thanks.

I've got a spare punctured ninebot max in my garage I've been considering doing some crazy upgrades to it as a bodge job project vehicle is it possible to do anything with it do you know? Hesitant as it runs via firmware but wouldn't be to bothered if it burnt out

@BootlegHuman

2 жыл бұрын

id say get a solid honecomb wheel (even better if you can get some suspension forks if it doesnt have suspension)

Great vid andy...modding for more power is why I subbed years ago :) Hows the china importing going?

@andykirby

2 жыл бұрын

Thanks! We import less these days amd supply direct from China.

I'm curious if anybody might have an idea how hard it would be to mod what I am assuming is a cheap Chinese scooter? I bought what looked like a "gently used" Phaewoo that the original pamphlet claimed a range of 12 to 18 miles (somewhere in there), but I road about 2 miles to and from work one day and it was almost completely dead from a full charge. So I'm assuming at the very least it has a shot battery. Said scooter also seems to top out at like 5mph in slow setting and probably around 8mph in high setting. I'd like to bump that up as well. It is a hubdrive motor in an 8 or 9 inch wheel. Don't remember the supposed watts it claims, but I'd like to be able to go 10-12mph for a leisurely pace, maybe up to 20 ish for VERY short bursts just for fun factor, as well as being able to take some decent hills.

@zigzagtoes

11 ай бұрын

Am finding them easy to mod, as long as ur pretty competent with electric wiring. With generic scoots, parts seem to be easily sourced too.

Any there is a way to stop the sparks use a resistor to charge the caps first.

You can actually do something against sparks when connecting a battery. Use an Anti Spark Switch...

@andykirby

2 жыл бұрын

Yeah I've seen them in the RC world.

@jeroenjager

2 жыл бұрын

@@andykirby yeah, and also in the e-sk8boarding scene. Cost about €40,- on Banggood...

wow Andy it drives like crazy....huh

Fantastic work, these are the skills a country needs to innovate and advance, unfortunately £300 fine and 6 penalty points on current of future licence is too big a price to pay courtesy of the overzealous taliban tactics traffic police, our poor kids in this country are the ones missing out and paying the price and yet we expect them to compete with the rest of the world !

@niteblaster1

2 жыл бұрын

Should be legal beginning of December Police told me, because scooter trials,end Nov 30th If they don't legalise them, All trial scooters will have to be taken off the road, Rental scooters are going to be permanent

@therealworldco

2 жыл бұрын

@@niteblaster1 so many people are using escooters. No one, not even the police, care. However, it may be different in London, I believe you can’t even take them into trains their.

@Motorizedstuff

2 жыл бұрын

@@therealworldco they do care I get chased every time I see them

@mashjames4401

Жыл бұрын

Literally we need more educated people

HI great video, just wondering has anybody gotten spare parts for this scooter , my display is faulty and i having a hard time finding one. Thanks

@OfficialPooYT

2 жыл бұрын

There will be a discord chat room for that brother

Where can I learn build fiido from scratch?

It looks like a mini moped with the seat on it.

@andykirby

2 жыл бұрын

Think that's why I like it.

You need to plug the charger into rhe scooter first, then into the wall

Great video. I am trying to do the same for an Brose e mountain bike. Looking to get more power/torque out of the motor not just more speed. Do you have a video covering this? Or a direction to point me?

@andykirby

2 жыл бұрын

Biggest challenge is figuring out the sensor wiring. Some motors like the bafang m620 don't even have conventional hall sensors so you have to run in sensorless mode look online to try and find others who have taken apart the motor in question so you can prep before you rip it apart!

@Crosshatch1212

2 жыл бұрын

Bro reply and I can point you in the direction of the only video I've come across of an electrical engineer taking apart a batangas motor and frankinsteining a 500 to get a 750 motor but he got stung so had to rip the motor apart then he just goes way in deep to the point I was lost im not good with electrics .lol give me an engine ill take it apart and put it bck together no problem ,simple wiring problems ok ,but not got a clue with all the talk n walk stuff .

@bryan3094

2 жыл бұрын

@@Crosshatch1212 thanks! I was thinking that there would be a huge opportunity for someone to figure out how to generate more power from a Brose or other mass market ebike. Not just speed restrictors. Seems like people do it for Banfang motors all the time. Any engineers out there want a challenge I will fund it.

@Crosshatch1212

2 жыл бұрын

@@bryan3094 kzread.info/dash/bejne/X32pm6ObdsyynJs.html hope you get this bro ,good luck ,

So whats the max speed??

covid track at 7:09. yay i want to buy it

Andy or anybody I got a hub motor with two leads coming out the hub. One side has phase and hall wires and the other side just has phase. It's a 12" 60v/2000w motor I'm just wondering do I need two controllers or both phase wires connected together then to the controller. But when I connect both together it runs like s**t. Any idea's would be helpfull because I'm tried of just going 55 kms I need more.

@Baldys_projects

2 жыл бұрын

I would only hook it up with which type of controller you have, if you're controller accepts the hall wires as well just run that side and don't worry about the extra phase wires on the other side. If you're looking for a higher top speed a higher voltage battery will help as long as the controller can handle it, you have to have a battery and controller that can supply enough amps to push it to the higher speeds you want.

@TKomoski

2 жыл бұрын

@@Baldys_projects Thanks that's what I thought don't hook up the extra phase wires. But I gave up and thought it was the controller I have a Yuyang King Controller. And the controller would not calibrate for some odd reason.

Hope your hand is OK. That molten connector must've hurt.

@Davelightuptheworld

2 жыл бұрын

always XT60 Plug for me

Looks like my town in essex . It is my town in essex.

I got apollo ghost and won't 2 have a 72 volt battery put in not for speed two go further distances and longer rides is fine all so the charger port is 3 pin and like micro phone plug is there a better suggestion for better charger ports and a 72 volt battery that would fit

Have the device reached 120 km/hr yet?

Have you thought about a 2 speed e-scooter? I saw a bicycle on youtube that you pedal backwards and it goes in a lower gear. It's like two free-wheels and one straight chain and one figure of 8 chain. I have an idea for a chain drive which is in one gear when the motor is spinning forwards and another lower gear when you reverse the polarity on the motor. It might be possible to install a controller that reverses the polarity of the motor when it senses a certain overcurrent e.g. you try and get it up too steep of a hill, then it switches into the lower gear (simply by changing rotation direction) until the current goes right down when the hill levels off and it's back into the high gear. I mean it can't be that hard - the auto reverse on cassette tape players does just that, plus there are some shredders that reverse to unjam themselves, so getting a scooter motor to reverse when it's overloaded and goes into the lower gear on the other freewheel shouldn't be too hard.

Hi there mate got a e scooter how much would it cost for me 2 send my scooter two you for a upgrade

Hi andy. lovin ur vids. i have a duel 1000 w motor scooter. can the phaserunner handle the pair.? many thanks in advance. ROGER.

@andykirby

2 жыл бұрын

Hi Roger, you'd need two phaserunners unfortunately.

@simonmooney7757

Жыл бұрын

@@andykirby Hi Andy, any idea where I can buy a phase runner controller please? Cheers

Keep the tyres, sling the rest. 😂

@andykirby

2 жыл бұрын

It's a great little scooter. Prefer to many others I've been sent.