Thank you so much for showing me this, you're like a trades school teacher and a dad all in one
@theironhorse6600
Жыл бұрын
You are so welcome!
@closertothetruth9209
Жыл бұрын
he has a wise head doesnt he, makes me miss my step father so similar.
@KLRFJR8 ай бұрын
Thanks for this video! Yesterday as I was finishing up the big bore kit on my 372, the bottom piston ring broke as I was installing it. I remembered that I once heard you say something about running "just one thin ring" on a two-groove piston, so I decided to just proceed and put it back together without a bottom ring. I want to give you credit for the prompt to keep me from quitting the job, and am happy to report that the saw runs really nicely. Today I sought out this video to confirm what the memory had told me, and now I've got the courage to keep running it without fear. Thank you!!!
@kennytheguitarfanatic054 Жыл бұрын
This is going to be a good series of videos. I can't wait to see how the 372 runs.
@donnywalker4691 Жыл бұрын
Good job buddy right on the money
@theironhorse6600
Жыл бұрын
Porting isn’t always the numbers game that people think it is! Nor is it about extremely high compression! Watch the level of performance gained in this saw!
@Husky87539 Жыл бұрын
Awesome! Can’t wait to see this saw in action.
@majorpixchannel7146 Жыл бұрын
Amazing build! 👏 thank you, sir!
@dirtytsfarm2141 Жыл бұрын
Thanks for going over your thoughts on the single vs double ring! Much appreciated! Also that tension trick is slick. Thanks for sharing sir!
@chrisjacobs2182 Жыл бұрын
Thanks for showing us it's really appreciated!
@wayneanderson991 Жыл бұрын
This is right up my ally. I really like the OE 372 platform saws!
@mpccenturion Жыл бұрын
Thank you! Really nice work!
@matthew-gn4qd Жыл бұрын
fascinating video Harvey. I didn't know about the piston ring mod. looking forward to learning more, thanks for sharing with us, amazing stuff!
@jayrobert5917 Жыл бұрын
Great video, what a learning experience, thank you.
@coolestguyontheplanet723 Жыл бұрын
Thanks, this is gonna be one of the best teaching vids
@bigfootandbananaman4746 Жыл бұрын
I want to see how this turns out. I learned something new lowering the ring tension. Thank you.
@DarrellBurgess-ze5cc Жыл бұрын
Great Video Harv!!!!!
@theironhorse6600
Жыл бұрын
Glad you enjoyed it!
@Witschor Жыл бұрын
Harvey thanks for this Build.I will try it on my 372! great Content .
@tinmanssaws Жыл бұрын
Shhhh harv you're giving away the good secrets!! 🤣 All joking aside I've used many of these moves (tought to me by you) and they absolutely work!
@Houseworksaws Жыл бұрын
The Stihl tapered wrist pins is what I use in all my builds. If I have to trim length I just Chuck it into my lathe.
@brendanthebattlerstafford5145 Жыл бұрын
Thanks for the vid Harv 👊
@diegovd7215 Жыл бұрын
Thank you Sir.
@harrybrandt2462 Жыл бұрын
Love what you're doing here. Thanks for the tips this is common sense. Not to say I don't like the other content, it's awesome. But this is cool in its own right. 😎
@wompwomp9 Жыл бұрын
Thank you so much for this video.
@Saw_Squatch Жыл бұрын
I can't wait to see more stock bore 372 content, especially once sawfest starts rolling around again!
@bjholbrooks434 Жыл бұрын
Love watching your videos! I would love to have one of your 372 builds!
@btrapr Жыл бұрын
Im looking forward to this! I recently acquired an early road bounced 372 from a former grading company owner. I also ran across a 272K 50mm P/C set off of a concrete saw that looks pretty good and the smashed cylinder piston is loaded with the factory ridged side skirts intact! From my small block Chevy days! I wanted a blue_printed motor for a longer life.
@travisweldmaster7815 Жыл бұрын
This is gonna be great!
@kevinmaxam2414 Жыл бұрын
Excellent vid and inf. Be safe and be careful
@itllkeal Жыл бұрын
Thanks 👍
@DaveyBlue32 Жыл бұрын
I usually order the meteor 371xp single ring piston kit to save the work or the 268 so I can work it and work the squish band up and make a nice combustion chamber and squish… I started putting my Caber rings in the middle of the power zone between the squish and the top of the exhaust and adjusting the ring gap so that there’s a little more space between the closedown tips on the ring… cool tips dude! Keep on Truckin!!! 😂👍💪✊❤️🇺🇸
@jankosandrevjr8193 Жыл бұрын
Good stuff sir.
@darrelljohnson4658 Жыл бұрын
Good class thanks
@raynheath450 Жыл бұрын
Awesome video I'm very interested in where you're going with this Hervey
@mikahakkinen5651 Жыл бұрын
this is bringing up some memories.we just to do similar mods on ours old 50cc mopeds. sometimes we did it work realy good and get more speed.good old times
@theironhorse6600
Жыл бұрын
Very cool!
@Finom1 Жыл бұрын
Bless your kind soul Ironhorse for sharing your life and wisdom with your united in love community:) God Bless and Protect you and your family:)
@timg9448 Жыл бұрын
Ironhorse this was a great piece of work you made and I’m grateful for the knowledge that you just shared with me. I have learned a lot about rings that I didn’t know. I’m a mechanic with 25 years experience. I just learned a Lot here. Thank You.
@theironhorse6600
Жыл бұрын
You are very welcome
@rickburk7427 Жыл бұрын
I love it nice video
@johndawkins2510 Жыл бұрын
Wow thank u so much
@danhal9966 Жыл бұрын
I love this stuff
@justinweaver8107 Жыл бұрын
Very interesting stuff🤔😁got me curious.
@henryroberts7098 Жыл бұрын
I am really looking forward to this series! Do you sand or stone the inside edges of the sanded ring? I am guessing there will be a small burr left by the sanding. What is the pin you chose? Stock from something else or did you grind a taper on the inside ends? Thanks.
@timg9448 Жыл бұрын
Oh, My!! He said Buckwheat!!! ;-D
@j.j.clingman4083 Жыл бұрын
Awesome video Ironman!! I’m definitely glad to see some new things done on saws that people over look when trying to build a saw!!! I have a 2159 jonsered saw with a 20” bar and a 24” bar!! I would really like to figure out the best way to improve the Hp and torque on my saw!!! I would definitely like for it to be about a 70cc saw because of its weight!! I’m a shorter guy at 4’10” and have a bad back!! So a heavier saw is definitely out of the question!!! I really like the 2159 saw but I really think it needs a muffler mod and a few more cc!! What are your thoughts on that and what way would you go???
@WildWestGarage Жыл бұрын
I’m looking forward to seeing the outcome on this. I might have to send you a pipe.
@theironhorse6600
Жыл бұрын
I would love to try one of your pipes! I know they work! It would be an honor!
@gustavogartner31452 ай бұрын
Tankssss
@jonsalvehakedal29884 ай бұрын
If you need to relearn something you have forgotten? Just check out what Ironhorse have shared with us😊 Thanks Harvey❤
@adamcook5433 Жыл бұрын
I just did this with a 660 and I was surprised.
@tomv7552 Жыл бұрын
Have a look at Total Seal’s zero gap low tension rings.
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
👍🆙Harvey
@evankibbe590 Жыл бұрын
Cool beans 😎
@paullynch7672 Жыл бұрын
Hi there, iv just stumbled on your channel & video about 2stroke motorbike cylinders "transfer ports", you gave me a better insight to doing the T-P than most of the other vids I looked at,, anyways quick question the divider wall that runs down the T-P on mines has been knife edged & cut down from the top a bit to much for my liking can this be repaired ie aluminium welded back up to a standard level to the bottom of the cylinder?? If I could send you some pictures photos I would to let you see what's what,, the bike is a yamaha rd350lc,, a big thanks from me at Scotland Edinburgh 👍🏴👍
@Houseworksaws Жыл бұрын
Early 372’s were the best!
@DaveyBlue32
Жыл бұрын
The 371xp’s with the single ring are the best saw’s ever built!!!
@ScrewdriverTUNING
Жыл бұрын
@@DaveyBlue32 holts G372xp pro are single ring quad transfers ❤️🔥
@Houseworksaws
Жыл бұрын
@@DaveyBlue32 It was a crap shoot it seemed on the early 372’s whether they were single or double ring. But yes the 371 was/is a phenomenal saw. I prefer the 268xp piston myself
@DaveyBlue32
Жыл бұрын
@@Houseworksaws yes indeed… a little popup and the squish band cut and it’s an animal!!! 😂👍
@justinweaver8107 Жыл бұрын
Rings remind me of the old thin ring Homelites an pioneers
@playingwivwood Жыл бұрын
Hell yeah. Most people think you need Porting and all kinds of timing changes to make any power but that is not true
@fabzacres-blackcat
Жыл бұрын
Each cylinder / saw is different so no ONE porting/build style is universally applicable! Laws of physics dictate More AIR = More TORQUE - always been this way and always will be - how ya get the increased air is up to you and your skill level … Too many guys tryin to “sell” ya these $500 port job/builds that sound like a angry hornet 🐝 these are tickin time bombs just waiting to blow 😂- IF ya know the nuts and bolts of how she works well ya know the ol saying … if ya can’t dazzle em with your brilliance then baffle em with bullshit, Fortunately I’ve been around the block and can call these turkeys out especially them ope forum boyZ - I luv boxing em in and then making em dance like a cat on a hot tin roof hee hee hee 😜
@theironhorse6600
Жыл бұрын
Well said!
@timbarden4578 Жыл бұрын
Id say your crazy but I know you are...one ring is better..waste to have 2...the pressure in the cylinder seals the ring during compression..the bottom ring dont get enough pressure to actually seal...rich from dynoport been saying that for years..👍👍
@marksmall6981 Жыл бұрын
I’m porting a 201tc, I’m using stock timing numbers. This video is so helpful. The piston is made for 2 rings. Should I run one ring?
@thef1sh17 Жыл бұрын
I have a couple stihls and it makes me crazy the piston doesn't completely open up to the exhaust port, which has a stock floor. The ts350 concrete saw is really bad. Should I not let it bother me or take a little off the piston? both have plenty of compression.
@ScrewdriverTUNING Жыл бұрын
Great video. I love when folks complain about Harvey you can tell almost instantly they can’t reproduce what your doing so in there mind your spreading false information. What slackers. Keep up the great work my friend .!!! 🧬☀️🔥
@theironhorse6600
Жыл бұрын
Exactly! You know I’m one of yer subs right?
@ScrewdriverTUNING
Жыл бұрын
@@theironhorse6600 🙏 I’m not much of a KZreadr but thank you so much.
@rtdc5662 Жыл бұрын
I can't help but laugh at people that cause drama over chainsaws or any other material thing. Unfortunately those are the kind of people we have to share this planet with. My favorite thing to do anymore is go as far into the woods and rivers to get as far away from "civilization" as I can. It's sad, and to be honest, I'm 41 and I'm not looking forward to the next 40 years. It sucks.
@richarddodds93269 ай бұрын
This is what I've been wanting to do with my Echo,and I want to "first do no harm".
@kylecromp319 Жыл бұрын
Have you thought of cutting windows in that piston? I’ve personally done that with a hyway piston worked great was a screamer until i had a c clip failure…….
@gustavogartner31452 ай бұрын
Okaaaa
@robertsmith7580 Жыл бұрын
🤯
@Concern4Life3 ай бұрын
Thanks for your generous sharing. What wrist pin did you replace the heavier one with? I watched 3 times and I could have sworn you said which pin it was ... maybe in another video.
@theironhorse6600
3 ай бұрын
Stihl oem 044/046/066
@Concern4Life
3 ай бұрын
@@theironhorse6600 Thank you so Much! I have put together, restoring to service 50+ saws but nothing in your realm. I appreciate the little gems that you say and take notes. I am looking for a lighter wrist pin for a Holzzforma 372xt ... hoping to "carefully" cut the weight of that piston and delete base gasket, and remove one ring and reduce the remaining ones tension.
@jrhensels711 Жыл бұрын
did you say what wrist pin that is i cant seam to find that part
@jamieeason3870 Жыл бұрын
Harvey Jamie from newfoundland i have a Husqvarna 272xp i would like to make more power out of it for milling what's the best thing to do ty
@lukereynolds9907 Жыл бұрын
Was wondering how you were Harvey mate
@dirtytsfarm2141 Жыл бұрын
Lets say one were to use both rings, for arguments sake. How does a 2 stroke oil between the rings? Drill oil holes DIY?
@85ZERO17 Жыл бұрын
IS THERE A RATIO TO STICK TO IN REGARDS TO HOW MUCH RING WIDTH TO REMOVE
@jasonlipovsky1141 Жыл бұрын
How much more power do ya think you could get outta 450 rancher just curious
@Super-Dave-Outdoors Жыл бұрын
What is your opinion on knurling worn pistons to snug them up in a bore again? Seen it on other channels and just curious on your input.
@theironhorse6600
Жыл бұрын
Not something I would do!
@carlknight7469 Жыл бұрын
I believe this is something that the beginner will be comfortable with
@danielsmith-ze3wy Жыл бұрын
Just sub to you hope to humbly learn with you. Hope everyone is having a blessed day
@theironhorse6600
Жыл бұрын
Thanks for showing up Dan! And welcome!
@ronsilva516 Жыл бұрын
It like the old saying gos’s more than one way to skin a cat
@larrywarner9314 Жыл бұрын
Wut wrist pin did you use Harvey ?
@garengtutorial8923 Жыл бұрын
Bisakah cylinder 365 di ganti dengan 372 ?
@theironhorse6600
Жыл бұрын
Yes it can!
@sagebrushhillbilly4655 Жыл бұрын
It would have never occured to me to remove material from those rings to reduce tension. That is ingenious. Something I have recently learned about modern auto engines, especially Toyota, is that a guy had better be religious about changing his oil. Don't buy into that 10k mile crap. Do it every 5k or 6 months, whatever comes first. The fine grit that accumulates in your oil can cause your OIL rings to stick in the grooves of the piston, causing oil blow by and thus oil consumption (burning oil). This is all because modern auto manufatueres figured out how much you can gain by running low tension rings, and thats what they do. More power, better feul economy, less emissions etc. To your point... RING TENSION MATTERS.
@stanleybennett8879 Жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌✌✌✌✌✌✌✌✌✌✌✌
@h200z Жыл бұрын
Small block Chevy in the background???
@theironhorse6600
Жыл бұрын
496 big block chevy
@ToddAdams1234
Жыл бұрын
It sure looks like 1 at 1st glance, but I’d have to see the valve covers to know for sure. Oh well. 😮
Пікірлер: 100
Thank you so much for showing me this, you're like a trades school teacher and a dad all in one
@theironhorse6600
Жыл бұрын
You are so welcome!
@closertothetruth9209
Жыл бұрын
he has a wise head doesnt he, makes me miss my step father so similar.
Thanks for this video! Yesterday as I was finishing up the big bore kit on my 372, the bottom piston ring broke as I was installing it. I remembered that I once heard you say something about running "just one thin ring" on a two-groove piston, so I decided to just proceed and put it back together without a bottom ring. I want to give you credit for the prompt to keep me from quitting the job, and am happy to report that the saw runs really nicely. Today I sought out this video to confirm what the memory had told me, and now I've got the courage to keep running it without fear. Thank you!!!
This is going to be a good series of videos. I can't wait to see how the 372 runs.
Good job buddy right on the money
@theironhorse6600
Жыл бұрын
Porting isn’t always the numbers game that people think it is! Nor is it about extremely high compression! Watch the level of performance gained in this saw!
Awesome! Can’t wait to see this saw in action.
Amazing build! 👏 thank you, sir!
Thanks for going over your thoughts on the single vs double ring! Much appreciated! Also that tension trick is slick. Thanks for sharing sir!
Thanks for showing us it's really appreciated!
This is right up my ally. I really like the OE 372 platform saws!
Thank you! Really nice work!
fascinating video Harvey. I didn't know about the piston ring mod. looking forward to learning more, thanks for sharing with us, amazing stuff!
Great video, what a learning experience, thank you.
Thanks, this is gonna be one of the best teaching vids
I want to see how this turns out. I learned something new lowering the ring tension. Thank you.
Great Video Harv!!!!!
@theironhorse6600
Жыл бұрын
Glad you enjoyed it!
Harvey thanks for this Build.I will try it on my 372! great Content .
Shhhh harv you're giving away the good secrets!! 🤣 All joking aside I've used many of these moves (tought to me by you) and they absolutely work!
The Stihl tapered wrist pins is what I use in all my builds. If I have to trim length I just Chuck it into my lathe.
Thanks for the vid Harv 👊
Thank you Sir.
Love what you're doing here. Thanks for the tips this is common sense. Not to say I don't like the other content, it's awesome. But this is cool in its own right. 😎
Thank you so much for this video.
I can't wait to see more stock bore 372 content, especially once sawfest starts rolling around again!
Love watching your videos! I would love to have one of your 372 builds!
Im looking forward to this! I recently acquired an early road bounced 372 from a former grading company owner. I also ran across a 272K 50mm P/C set off of a concrete saw that looks pretty good and the smashed cylinder piston is loaded with the factory ridged side skirts intact! From my small block Chevy days! I wanted a blue_printed motor for a longer life.
This is gonna be great!
Excellent vid and inf. Be safe and be careful
Thanks 👍
I usually order the meteor 371xp single ring piston kit to save the work or the 268 so I can work it and work the squish band up and make a nice combustion chamber and squish… I started putting my Caber rings in the middle of the power zone between the squish and the top of the exhaust and adjusting the ring gap so that there’s a little more space between the closedown tips on the ring… cool tips dude! Keep on Truckin!!! 😂👍💪✊❤️🇺🇸
Good stuff sir.
Good class thanks
Awesome video I'm very interested in where you're going with this Hervey
this is bringing up some memories.we just to do similar mods on ours old 50cc mopeds. sometimes we did it work realy good and get more speed.good old times
@theironhorse6600
Жыл бұрын
Very cool!
Bless your kind soul Ironhorse for sharing your life and wisdom with your united in love community:) God Bless and Protect you and your family:)
Ironhorse this was a great piece of work you made and I’m grateful for the knowledge that you just shared with me. I have learned a lot about rings that I didn’t know. I’m a mechanic with 25 years experience. I just learned a Lot here. Thank You.
@theironhorse6600
Жыл бұрын
You are very welcome
I love it nice video
Wow thank u so much
I love this stuff
Very interesting stuff🤔😁got me curious.
I am really looking forward to this series! Do you sand or stone the inside edges of the sanded ring? I am guessing there will be a small burr left by the sanding. What is the pin you chose? Stock from something else or did you grind a taper on the inside ends? Thanks.
Oh, My!! He said Buckwheat!!! ;-D
Awesome video Ironman!! I’m definitely glad to see some new things done on saws that people over look when trying to build a saw!!! I have a 2159 jonsered saw with a 20” bar and a 24” bar!! I would really like to figure out the best way to improve the Hp and torque on my saw!!! I would definitely like for it to be about a 70cc saw because of its weight!! I’m a shorter guy at 4’10” and have a bad back!! So a heavier saw is definitely out of the question!!! I really like the 2159 saw but I really think it needs a muffler mod and a few more cc!! What are your thoughts on that and what way would you go???
I’m looking forward to seeing the outcome on this. I might have to send you a pipe.
@theironhorse6600
Жыл бұрын
I would love to try one of your pipes! I know they work! It would be an honor!
Tankssss
If you need to relearn something you have forgotten? Just check out what Ironhorse have shared with us😊 Thanks Harvey❤
I just did this with a 660 and I was surprised.
Have a look at Total Seal’s zero gap low tension rings.
👍🆙Harvey
Cool beans 😎
Hi there, iv just stumbled on your channel & video about 2stroke motorbike cylinders "transfer ports", you gave me a better insight to doing the T-P than most of the other vids I looked at,, anyways quick question the divider wall that runs down the T-P on mines has been knife edged & cut down from the top a bit to much for my liking can this be repaired ie aluminium welded back up to a standard level to the bottom of the cylinder?? If I could send you some pictures photos I would to let you see what's what,, the bike is a yamaha rd350lc,, a big thanks from me at Scotland Edinburgh 👍🏴👍
Early 372’s were the best!
@DaveyBlue32
Жыл бұрын
The 371xp’s with the single ring are the best saw’s ever built!!!
@ScrewdriverTUNING
Жыл бұрын
@@DaveyBlue32 holts G372xp pro are single ring quad transfers ❤️🔥
@Houseworksaws
Жыл бұрын
@@DaveyBlue32 It was a crap shoot it seemed on the early 372’s whether they were single or double ring. But yes the 371 was/is a phenomenal saw. I prefer the 268xp piston myself
@DaveyBlue32
Жыл бұрын
@@Houseworksaws yes indeed… a little popup and the squish band cut and it’s an animal!!! 😂👍
Rings remind me of the old thin ring Homelites an pioneers
Hell yeah. Most people think you need Porting and all kinds of timing changes to make any power but that is not true
@fabzacres-blackcat
Жыл бұрын
Each cylinder / saw is different so no ONE porting/build style is universally applicable! Laws of physics dictate More AIR = More TORQUE - always been this way and always will be - how ya get the increased air is up to you and your skill level … Too many guys tryin to “sell” ya these $500 port job/builds that sound like a angry hornet 🐝 these are tickin time bombs just waiting to blow 😂- IF ya know the nuts and bolts of how she works well ya know the ol saying … if ya can’t dazzle em with your brilliance then baffle em with bullshit, Fortunately I’ve been around the block and can call these turkeys out especially them ope forum boyZ - I luv boxing em in and then making em dance like a cat on a hot tin roof hee hee hee 😜
@theironhorse6600
Жыл бұрын
Well said!
Id say your crazy but I know you are...one ring is better..waste to have 2...the pressure in the cylinder seals the ring during compression..the bottom ring dont get enough pressure to actually seal...rich from dynoport been saying that for years..👍👍
I’m porting a 201tc, I’m using stock timing numbers. This video is so helpful. The piston is made for 2 rings. Should I run one ring?
I have a couple stihls and it makes me crazy the piston doesn't completely open up to the exhaust port, which has a stock floor. The ts350 concrete saw is really bad. Should I not let it bother me or take a little off the piston? both have plenty of compression.
Great video. I love when folks complain about Harvey you can tell almost instantly they can’t reproduce what your doing so in there mind your spreading false information. What slackers. Keep up the great work my friend .!!! 🧬☀️🔥
@theironhorse6600
Жыл бұрын
Exactly! You know I’m one of yer subs right?
@ScrewdriverTUNING
Жыл бұрын
@@theironhorse6600 🙏 I’m not much of a KZreadr but thank you so much.
I can't help but laugh at people that cause drama over chainsaws or any other material thing. Unfortunately those are the kind of people we have to share this planet with. My favorite thing to do anymore is go as far into the woods and rivers to get as far away from "civilization" as I can. It's sad, and to be honest, I'm 41 and I'm not looking forward to the next 40 years. It sucks.
This is what I've been wanting to do with my Echo,and I want to "first do no harm".
Have you thought of cutting windows in that piston? I’ve personally done that with a hyway piston worked great was a screamer until i had a c clip failure…….
Okaaaa
🤯
Thanks for your generous sharing. What wrist pin did you replace the heavier one with? I watched 3 times and I could have sworn you said which pin it was ... maybe in another video.
@theironhorse6600
3 ай бұрын
Stihl oem 044/046/066
@Concern4Life
3 ай бұрын
@@theironhorse6600 Thank you so Much! I have put together, restoring to service 50+ saws but nothing in your realm. I appreciate the little gems that you say and take notes. I am looking for a lighter wrist pin for a Holzzforma 372xt ... hoping to "carefully" cut the weight of that piston and delete base gasket, and remove one ring and reduce the remaining ones tension.
did you say what wrist pin that is i cant seam to find that part
Harvey Jamie from newfoundland i have a Husqvarna 272xp i would like to make more power out of it for milling what's the best thing to do ty
Was wondering how you were Harvey mate
Lets say one were to use both rings, for arguments sake. How does a 2 stroke oil between the rings? Drill oil holes DIY?
IS THERE A RATIO TO STICK TO IN REGARDS TO HOW MUCH RING WIDTH TO REMOVE
How much more power do ya think you could get outta 450 rancher just curious
What is your opinion on knurling worn pistons to snug them up in a bore again? Seen it on other channels and just curious on your input.
@theironhorse6600
Жыл бұрын
Not something I would do!
I believe this is something that the beginner will be comfortable with
Just sub to you hope to humbly learn with you. Hope everyone is having a blessed day
@theironhorse6600
Жыл бұрын
Thanks for showing up Dan! And welcome!
It like the old saying gos’s more than one way to skin a cat
Wut wrist pin did you use Harvey ?
Bisakah cylinder 365 di ganti dengan 372 ?
@theironhorse6600
Жыл бұрын
Yes it can!
It would have never occured to me to remove material from those rings to reduce tension. That is ingenious. Something I have recently learned about modern auto engines, especially Toyota, is that a guy had better be religious about changing his oil. Don't buy into that 10k mile crap. Do it every 5k or 6 months, whatever comes first. The fine grit that accumulates in your oil can cause your OIL rings to stick in the grooves of the piston, causing oil blow by and thus oil consumption (burning oil). This is all because modern auto manufatueres figured out how much you can gain by running low tension rings, and thats what they do. More power, better feul economy, less emissions etc. To your point... RING TENSION MATTERS.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌✌✌✌✌✌✌✌✌✌✌✌
Small block Chevy in the background???
@theironhorse6600
Жыл бұрын
496 big block chevy
@ToddAdams1234
Жыл бұрын
It sure looks like 1 at 1st glance, but I’d have to see the valve covers to know for sure. Oh well. 😮