LEGO Star Wars 75272 Sith Tie Fighter 2020 Set Review!
Ойын-сауық
Once more the SITH will rule the galaxy. With the LEGO Star Wars 2020 Sith Tie Fighter you can make that a reality! Set 75272 includes another LEGO Star Wars Knight of Ren and is the main Minifigure draw in this set. $80 is a bit on the high side but should you buy the LEGO Star Wars 75272 Sith Tie Fighter anyways?
Thank you to The LEGO Group for sending me this set for FREE to review!
- - - - - - - - - -
Links To Cool Things.
My Website - bonafidebricks.com/
Merch - teespring.com/stores/mandrpro...
Vlogs - / mandrproductionsxtra
Instagram - / mandrproductions
Twitter - / mandrtweets
Subreddit - / mandrproductions
My Chair: bit.ly/2PWNJf3 ("MandR" for 10% off!)
Business Inquiries - MandRprod34@gmail.com
Shop Amazon with this link to support the channel! :) www.amazon.com/shop/mandrprod...
- - - - - - - - - -
Best of MandRproductions: • Best of MandRproductions
- - - - - - - - - -
#LEGOStarWars #TheRiseOfSkywalker #MandRproductions
Пікірлер: 449
This might be the most overpriced Tie Fighter set ever. No cap. Buy this set on Amazon (Affiliate Link): amzn.to/37svDtd
@christiandabest1932
4 жыл бұрын
MandRproductions yah I want it but it so overpriced for legos!
@gillylaw2139
4 жыл бұрын
I like it but the piece count and the price for it is disgusting
@luisemoralesfalcon4716
4 жыл бұрын
Wait till LEGO makes an OT Tie Bomber set at $90.
@christianweber7435
4 жыл бұрын
Do you think they could make a LEGO set out of the Tie fighter from mandalorian chapter 7
@luisemoralesfalcon4716
4 жыл бұрын
@@christianweber7435 At $100 as well some "totally accurate" figures.
They should’ve made a sith tie pilot for this set
@phosphorusyumi9702
4 жыл бұрын
Might not have been one
@ilikepigeons6101
4 жыл бұрын
We don't even know who pilots them
@phosphorusyumi9702
4 жыл бұрын
@@ilikepigeons6101 yeah
@stylieguy2434
4 жыл бұрын
I wish
@stylieguy2434
4 жыл бұрын
@@ilikepigeons6101 true
Sith Tie Fighter is a name made by LEGO, Tie Dagger is correct name.
@williamrose5695
4 жыл бұрын
well technically it's not wrong either way
@connorbarnett3364
4 жыл бұрын
Dagger isn't the most kid friendly.
@totallyrich
4 жыл бұрын
K
@totallyrich
4 жыл бұрын
Well it can be named as Tie/DG fighter
@matthewk4748
4 жыл бұрын
@@williamrose5695 ya
I was eating doritos when this was in my home page
@MandRproductions
4 жыл бұрын
Today’s your lucky day
@weewee3559
4 жыл бұрын
No
@connorbarnett3364
4 жыл бұрын
What flavour?
@jakey1254
4 жыл бұрын
69th like
@dwightwashere7174
3 жыл бұрын
Yes.
Despite all this set's flaws, and its high price, I STILL regard this set as one of the only TIE models I want to get a full squadron of.
@judee.7186
9 ай бұрын
Just picked up a used dorito tie from my nearest Bricks & Minifigs for 45 dollars, and for 45 dollars, it's an awesome display piece! Once I find some room for it, it'll absolutely dominate whatever shelf it gets. I got it so cheap because it didn't have the knight of ren or Fin, but I'm not much of a minifig collector, so it was definitely worth it. It's a cool enough ship for that much of a discount. And yes, I agree. I would love to have a swarm of these some day
2:36 "This will make a fine addition to my collection."
@ICantThinkOfAUser-ds6nb
4 жыл бұрын
Haha lol 😂
@jimbojumbo_0186
4 жыл бұрын
general kenobi
@Bentadeo
4 жыл бұрын
Hello there
@Phenox445
4 жыл бұрын
Lol
1:51 Talks about Finn. Regular Poe hair. :D
@yourfriendlyneighbourhoodb7585
4 жыл бұрын
John wick just got flicked
@yourfriendlyneighbourhoodb7585
4 жыл бұрын
Chick hicks dies by a pick.
@bgtjoo9plssub304
4 жыл бұрын
Ye
@turkeysammich7629
3 жыл бұрын
I thought I was the only one who heard that lol
This is great and all, but we’re all still waiting for that Buildable Jyn review...
@axelrivera3382
4 жыл бұрын
We do not speak of those sets.
@johnnyninecocks
4 жыл бұрын
@Captain Axe Dude. This is obviously a joke. He’s been posting that for ages now.
@irinayukor
4 жыл бұрын
Yeetus McYeet so was that
@yenovys69
4 жыл бұрын
@@johnnyninecocks yo yeah $#!✓ dude
@willbrust9725
4 жыл бұрын
@@yenovys69 are you afraid to say "shit"
2:27 that's a UraKai sword from lord of the rings
@Royal_bricks
3 жыл бұрын
Noyes
@stepanvaculik8614
3 жыл бұрын
I think you meant Uruk-hai
I kind of like the design and the fact they’ve gone beyond the traditional. It’s more like a tie interceptor than a tie fighter. Sure that’ll get a heavy discount in Jan
@soundwavegamer2321
4 жыл бұрын
GJBricks I’d rather have a classic Tie or a Classic Tie interceptor then this flying monstrosity
@GJBricks
4 жыл бұрын
Soundwavegamer totally agree on the interceptor. A classic shape
Anyone else notice the Knight of Ren has the orc sword from Lord of The Rings sets?
Considering the price I think they should have added 1 or 2 more minifigures. Say a sith trooper or resistance trooper?
@AnonymousAnonymous-ts6me
3 жыл бұрын
Or a nother knight of ren
@pantelisdalezios811
3 жыл бұрын
@@AnonymousAnonymous-ts6me To me it would need like 10 figures to justify the price lol
@noahmaldonado5461
2 жыл бұрын
Or maybe rose in her episode 9 outfit
I hope a moc builder makes it all orange
@connorbarnett3364
4 жыл бұрын
Whyyyyyyyy?
@yesmybagel1256
4 жыл бұрын
Connor Barnett dorito
@connorbarnett3364
4 жыл бұрын
@@yesmybagel1256 oh that explains a lot. But it's already a heatwave dorito
Take a shot every time Ryan says “Knight of ren”
That printing on the top of the cockpit I believe has been around since at least 2002. Love that transparent red cockpit piece. I don't really like the shape of the wings, how many Tie Variants do we need? New wedge is nice looking. $80 is too much, especially for only one exclusive Minifig. I believe the sword the Knight of Ren has was called a Scimitar in the Lego Lotr Video Game.
@thetombuck
2 жыл бұрын
First appearance of that print was the 2001 Tie Fighter in dark grey 🙂
@michajoslin1422
Жыл бұрын
Chicken nuglet
Weight wise that wouldn't matter if it was in space technically. I wouldn't think (physics wise) tie would have much of a chance of flying in a atmosphere. Great review
You could push the thrusters forward to make it so you don’t have to push the thrusters after you push the top part on the roof of the ship
If you buy 2 you can put on either side of the kylo ren command shuttle as like it's guards and a few sith troopers from the new sith trooper battle pack .
@snorlax983
4 жыл бұрын
Yeah but it's over priced
2:36 - I see what you did there.
Think you could compare the tie dagger to the tie interceptor
@Matthewpower529
4 жыл бұрын
Definitely
@irishtrains1396
4 жыл бұрын
In a way, yes.
@theblue_hatter4829
3 ай бұрын
Flying Vulture droid but it’s a tie interceptor
Soooo what’s the justification for that price tag? It must be because they know people will want to collect all Knights of Ren...
Def waiting for it to be discounted at least 40% lmao and still might not. The back has a nice shape but wtf are tho engines, and the back of the wings just look rough lol
Another fine addition to my collection...
I def understand what you mean with the odd weight distribution. I can tell that picking it up and holding it for a solid three minutes would start to hurt your wrist a little if you hold it with one hand.
Awesome review and awesome set !!! + 1like
Maybe that’s an engine tilt feature for take off? Place the pilot in and you’re off! Then orient the engines for forward flight? Again just a long stretch guess
Ryan - you have a mistake in the build. The "trigger" plates that fire the spring-loaded missiles should be studs-out.
@crippled_taco0871
3 жыл бұрын
Thank God I am not the only one who noticed
The actual name of this tie fighter is the dagger, it says sith tie fighter just because they youse them
I’m staring at the og first order tie pilot, and that is definitely a new helmet print
The “design flaw” reminds me a lot of the hinged door on the UCS BB-8
I was at home eating Doritos when my phone rang. “dorito fighter” y e s
@nathandroppedoff
4 жыл бұрын
*club penguin is kill*
Epic review!
I just came back from rise of Skywalker (Amazing)
Spoiler Ryan dies in the rise of skywalker
@MyHeadsHollow
4 жыл бұрын
Ryan?
@LB_the_Creator
4 жыл бұрын
@@MyHeadsHollow he is Mandrproduction
I just built mine. Kinda mad about the price, but other than that, I really like it. The stand is pretty impressive considering how few pieces it is.
I bought a beautiful xwing for the same price as this and it had around 750 frickin pieces!!!
Hey Ryan the red outlines on the tie mean proto type like the tie defender from rebels
Cool video
Ryan the 2020 sets are available in my local target, but sorry the bad news is its in Australia i picked up kylo rens tie fighter but i think you can buy these sets online on amazon or something
The knight of ren in this set has half of a death trooper helmet on.
“Dorito Tie Figher”
The sword on the knight of Ren is definitley a Uruk sword from lord of the rings.
With the Finn minifig I recommend taking the old Finn face from The Force Awakens wave (if you have it) and swapping it out with that ridiculous Finn face
My major issue with this set (that nobody seems to realise or care about) is the fact it NEEDS the stand to look proper. I believe a tie fighter shouldn’t need to have a stand. They’re meant to stand up and you can’t do it without it tipping forward and looking odd. It bugs me a lot
@noahmaldonado5461
Жыл бұрын
It's not Lego's fault, they were just following the actual design
There is a tie pilot with red markings in the kylo red tie fighter set
I like this set very much.
General grievous collecting all the Knights of ren: This will make a gone addition to my correction
I am going to get that for sure
i tought it was Mand-R Productions instead or M-and-R production
With the red line it is a sith tie fighter but the name of the model is tie dagger
I think that the previous TIE fighter pilot did not have a glasses line under the eyes
You should make a video about all the star wars box art
I almost got this set once, but ended up getting a resistance Y-wing instead.
Drop test? Please?
Should I get this set or kylos tie silencer or the sith trooper red tie interceptor
Ahhh… the Tie Dorito.
So any one else notice that the knight of ren has an uruk-hai sword from LOTR. Did Lego still have a lot spare?
I watched ur stream late and u spoiled it for me but I'm kinda stupid for clicking on it! 😂😂😂
4:27 Major vonreg: am i a joke to u
@maryzu36
4 жыл бұрын
LOL!!
I got this set and it’s a nice addition to my collection
@Noble6_6
4 жыл бұрын
Hello there
@eduardhueffer9205
4 жыл бұрын
General Kenobi
This is my favourite set from the wave
nice vid, however I think you're being too nice at LEGO for pricing it at 80$. In addition to this, some of the problems you mentioned seemed to me like way too much of a 1st world problem that noone would care about in my opinion (like the fact Finn is the same). Btw, any idea whether more SW III sets will come in 2020?
@zap192
4 жыл бұрын
Literally every complaint about a toy is a "first world problem." You're watching a toy review lol
I hate the bottom of the cockpits shaping, the Doritos look great, the windshield looks great, and I love the thrusters in the back
Can't go wrong with a Black and Red color scheme
I bought the Von Regs Tie Fighter for 45 Euros, which one is better in your opinion?
Happy New Year everyone new decade!!!!!!
I bought this set recently and I have experienced little to no problem with the weighting 'issue'.
Does it come in cool ranch?
I think I mentioned it before but in 04 you could get a 4 pack of Tie Fighters for 70$, or about 18$ a Tie Fighter, and they're legitimate, well build basically full Ties. 20$ is what the juniorized Tie's cost in 2020. Inflation or no the increase in complexity, piece count, and price is getting ridiculous even if the sets are 'technically' superior. I don't know if the value is there for a child buying a set or getting a gift to get one 80$ tie for Christmas. I know that when I was 10 and got a 4 pack of cool Ties, I was way more excited than if I got just one.
Been subscribed to him for like 2-3 years. And I finally just understood his intro. “Hey what’s up studs” I always assumed he meant “Studs” like an Attractive man. Which I thought was weird. Then I remembered that the circular LEGO piece is called a stud, now I feel stupid.
I have to buy it at full price though. Lego doesn't go on sale here. It also costs more here than it does in the US in general so at best it'll be €80. But I love the design too much not to have it, so I don't have much of a choice. I usually just buy Lego online anyway, we don't exactly have Walmart here.
On the stand I switched the tile and the plate so it was easier to put on It was a pain otherwise
The minifig Will make a fine edition to my collection
You need to work on your rating scale. Every set is 7,8 or 9 with you it seems lol
@hkr1240
4 жыл бұрын
Yes
@armaan1457
4 жыл бұрын
I’ve seen many 5’s
Will there be any more rise of Skywalker sets or is this it?
ah I see we have a knight of hai or uruk ren with that sword
This is the only set I need for this first 2020 wave of Lego star Wars. And I want it for the Knight Of Ren(I have the others three) and the tie fighter looks kinda ok but I DO NOT wanna pay $80 for just this.. just 3 figs and this? Yikes Expensive! It keeps holding me back from purchasing 😅
Aren't tie fighters v-tol so should have the engine move
$80 for 400pcs what a rip off!!
@maryzu36
4 жыл бұрын
I know dude but I am Canadian so is Canada it cost... $89.99!!!!!!! Shit
@hillbillyK
4 жыл бұрын
star wars lover!! I know what it feels like
@koer
4 жыл бұрын
i saw it in a store for 70€, but then i saw it in a web store for 30€. it had to be a mistake, but if it isn't, im probs buying it.
I hope someone would really turned it into Tie Dorito. :D
great video again
@MandRproductions
4 жыл бұрын
Emre Bilgin thanks! :)
Does it have punch tabs or tape for the box?
2:37 be like noone: Ryan: *a fine addition to your collection*
@joni428
4 жыл бұрын
Me: laughs in Grievous
Can you make a rise of Skywalker showcase video?
Can you turn this into a Tie interceptor?
Just got this for 20% off at £52. Its original price was way too high but I’m glad to have it at the price it should be.
I'm only into it cuz of the knight it's so cool
I was excited for it initially but now it looks SUPER plain. Probably would of preferred the TIE Whisperer even if it would have just another Kylo
Where I live, some stores sell this for 65€
I can't get into KZread without one spoiler holy shit this is just like endgame now
@MandRproductions
4 жыл бұрын
It’s a bit naive to be on the internet now that the movies out and expect not to see spoilers.
Just bought and built that set
What did you do to those spring loaded shooter buttons? Lol
Tbis is why I collect Mega construx. Just as good quality but you arent spending 3 times the amount.
you built the spring loaded shooter part wrongly, the activator
How is it that we have had multiple Tie Fighters and ST sets and yet no OT Tie Bomber. Who wants to think that LEGO will make a Tie Bomber but based on the ST?
@JonathanAntillies0
4 жыл бұрын
While I think this TIE is a cool-looking design, I agree the long-standing lack of a TIE Bomber is painful. I finally got over it when I just got the instructions for Jerac's TIE Bomber MOC and built that. That model is beautiful! Essentially a UCS TIE Bomber at perfect minifig scale, couldn't love it more!
@spartanwarrior1
4 жыл бұрын
Still waiting for a tie bomber!
@luisemoralesfalcon4716
4 жыл бұрын
@@JonathanAntillies0 Seems I am not alone into wanting to buy that fan made model.
@luisemoralesfalcon4716
4 жыл бұрын
@amazing toast UT-AT for example.
@JonathanAntillies0
4 жыл бұрын
@@luisemoralesfalcon4716 It was so worth it! Will set you back 2/3rds of what you could get a UCS Y-Wing set for; but the perfect size, the shape, and the details are second to none. Not to mention the weight, the finished model is HEAVY for its size, although it would be for ~1500 pieces packed in a relatively small package.
So, Nacho cheese or super spicy Doritos Tie Fighter XD
I wanted this set so bad but it was $80 but now it’s $63! Imma get it for sure
Resistance B wing
I love the design of the set, it's just ashame that some of the minifigures are repeated and that the fighter itself can't stand on its own
@noahmaldonado5461
Жыл бұрын
It's not Lego's fault, they were just following the actual design
The sword looks like an Uruk hai sword from LoTR