Damn! I spent $20.00 on a light strip on Amazon and couldn’t be happier. You’re a better man than me coughing up 10Xs the price on yours.

@bc_usa

2 жыл бұрын

Naah you're just cheap.

....spends $200 on a tailgate lightbar - okay fine.... doesn't spend $12 on a soldering iron to make good connections - not so cool....

@carslave

5 жыл бұрын

WORD!!!

@fk3321

5 жыл бұрын

He’s a newb, give him a break

@blake8346

5 жыл бұрын

Cringy eh

@lostintime8651

5 жыл бұрын

No go have to save my money for crack

@jakepyra1432

5 жыл бұрын

The tape probably fell off before he was done with the video.....

less talk more action

@cadenceandfamily2159

3 жыл бұрын

A ha ha ha ha!!!!! The light looks awesome!!!

Need to swap out the taillight bulbs for LEDs so they're instant on/off like the light bar. That would drive me absolutely crazy seeing the stock signals and brakes fade in and out while the light bar comes on and turns off instantly. Edit: This would be a must for me, even without the light bar!

I love seeing this build come along, it's so satisfying.

@ryan2546

6 жыл бұрын

Me too 😍

I love my Putco Blade...i've had 3 since Christmas 2018. Thank God for the warranty.

Hey man, just wanted to say thanks for this video. I bought my Putco 48" this week, it came in yesterday and I got it installed last night. Super awesome light and have gotten a lot of compliments on it. I'll post a video and give you a shout out. Thanks again!

Thanks for the recommendation. I am surprised you got one with Amber flashers when your truck doesnt have amber flashers on the rear. I want to get one for my 98 K1500, which only has red on the rear, so I hope they have one with Stop/Running, Reverse, and Red Flash. Great video!

Has he heard of the CURT 55384 Vehicle Side Custom USCAR Vehicle Trailer Wiring Harness for Towing, 4-Pin Trailer Wiring? I used it to install my OPT7 Triple LED Tailgate Bar with sequential turn signal, and the only splice I had to do was for the Reverse cable. The CURT harness took care of the rest. In my case the bar already came with the 4-Pin connector pre-installed and a single cable for the Reverse.

How's is Putco Blade holding up? Getting mix reviews as far lasting long!

Looks like a sweet rear end upgrade. To avoid future problems, I would highly suggest (as others have, but i'm trying to add a helpful factor in and not just name call) you do a better splice in job. The elements will make it through your electrical tape and corrode those connections. Those scotch lock connectors (t-taps) are no good and have seen them fail many times as well. I mean your connections, as is now, may last a week, a year, or maybe 10 years, but I'm sure you don't want to have to worry about it at all. I would suggest cutting the wires apart where you spliced in and either soldering them and then covering them with heat shrink that has adhesive inside that will help seal it up, or use butt splice connectors that have heat shrink with adhesive on them. You can get ones that can accept 2 wire on one side and one wire on the other side (like a yellow butt on one side and blue on the other). To take that even further in to the professional installation side, you could make or purchase an 8" adaptor with the correct connectors and amount of wires and then splice in off of that and have a connector there and install a connector on the light bar wires. You could then remove the adaptor and light bar if you ever wanted and just plug the factory connectors back together. Obviously this is just my opinion and someone else might call me an idiot or maybe have something helpful to add, which i'm fine with learning, But this is what has worked for me to make good wiring connections and not have to worry about them. Cheers

@ryan2546

5 жыл бұрын

I respect you actually commented on how I should do it to not worry! Lol I did it this way so if I wanted I could always remove it without cutting! I didn’t want to cut and solder the harness back together, I may solder the connections in the future but for now they’re gonna be like that for a while lololol

@conan73xxx21

5 жыл бұрын

Bradley is right, do it right the first time. I lmfao when I saw you twist splice and tape the joints.

@garydp9760

5 жыл бұрын

I haven't watched the whole video yet but doesn't somebody make some type of plug and play so you don't have to cut any wiring and in the future if you wanted to remove it you just plug the original back in???

Did you just wrap spliced wires on the under side of the truck with just electrical tape? No solder, connectors or heat shrink? Moisture problems ahead.

I REALLY like the Reverse and Hazard light function and appearance. Thank for this information and post....

Block the spare tire crank lowering access hole 👍

That's install is major clean. Nice truck.

New drinking game.... every time he says “here” drink. 😂

@emmahammond5088

3 жыл бұрын

Too duckin frunk ta continue playin......grate

Don’t use any snap connectors, always use heat shrink connections. They’re weatherproof, and will not corrode if you do it properly do it. Splicing wires the way he did is sure to fail shortly.

@CarlosHernandez-zr5cz

5 жыл бұрын

Yup. If you’ve seen his more recent videos it’s already failed

@mcham0846

4 жыл бұрын

Posi-tap or the supplied ones work with electrical tape. Haven't had any issues for 2 years. Glad i didnt aoldoer becausei sold the truck but wanted to keep the blade

Now you can't get your spare tire down you covered up the access hole... This the only reason I haven't put one of these on my Ram 2500

I've two of these light bars on my 2015 ram 1500. Great looking and functional when they work. First one lasted 4 months the shop replaced it and now this isn't working. Shop says they've had several issues and on the phone with putco. They'll install another one but said it'll happen again

That one is pretty sweet. I have the Opt-7 tailgate light bar and it’s pretty legit too. The yellow blinker light has a chasing sequential effect.

The adhesion promoter isn't for the paint side it's for the light bar side when you stick the tape too

Oh snap I need this!!! Subscribed great video I just got a ram 1500 ready to mod it up

Thx for the video. Anyway to show the back up camera while light is on? Or maybe quick answer on if it effects the camera with how bright the light is? Im worried it might effect the back up cameras picture at night. But either way great video, keep them coming. Thx

Received my light bar and wired it today. The lights are amazing [bright and crisp]. Get one, you'll love it. Save yourself some time and order a Curt #56584 harness and #58550 5 pin connector plug from Amazon. Just plug and play, no cutting into your trucks wiring. You will have to wire in the backup light, but this can be done on your work bench. Thanks Ryan. Also the light bar does NOT interfere with the lowering of the spare tire, you just have to modify the protective ring a bit.

@angelrodriguez3230

5 жыл бұрын

Nelson Bardsley I’m trying to avoid all the splicing or whatever. I was going to order that harness with it, but it says it doesn’t fit my truck I have a 2014 ram 1500. Any recommendations??

@nelsonbardsley3535

5 жыл бұрын

Angel, There are so many variations of wiring harnesses and truck configurations. Get ahold of "curtmfg.com" and they will be able to help you. My truck is a 2017 model Ram.

@charlietuna5962

5 жыл бұрын

Great info and a very helpful and respectable response there Nelson! The world needs more kind people like you in it! Drive safely and enjoy the holidays.

@steve5912

5 жыл бұрын

@@nelsonbardsley3535 Be honest man are you getting paid by them to say this or no? I have a 2006 5.9 Cummins do you think itll work?

@nelsonbardsley3535

5 жыл бұрын

@@steve5912 Sorry, not getting paid, just love the product and install was easy. It should fit almost any pickup.

My 50$ front ebay very bright led set-up has been goood for just over a year with no problems, still like new. Came with lights, wiring and switch for in cab. I dont think I'd get fancy ones and be spend 10x to 20x more for not much different. Cool look though!

You put so much into your Ram truck, now protect the center of rear wheel well openings from rusting. It's a very common problem for Ram Trucks. Light bar looks fantastic....

Godamn the edits on this video!

I wonder if light goes on tail gate why not take tail gate off to make install easier? if it goes on end of bed still remove TG for easier installation. just wondering

Remove the dealership license plate frame.

@SugmaDLigmaNutz

6 жыл бұрын

I think they give him inscentive(royalties) for keeping it on to advertise. Could be wrong.

@WillBuryU

5 жыл бұрын

Dealer pays 10 dollars a month here to drive around with it.

@jarrodcavanaugh6735

5 жыл бұрын

Could be paying for him to drive that hideous green truck.

@Austin-cx2xe

4 жыл бұрын

All license plate frames look bad.

I got one on my car silly I know But I do t have a daytime runner wired in (weird on a car) but the brake lights flash 2 times before staying solid and the turn signal goes from one side to the other sorta like an Audi signal. Cheap and easy mod!

I went a much different route, I mounted a 22 inch led light bar on my truck bed to deter tailgaters....12,400 lumens of light is extremely effective, most won't come near me just cause they see it pointing directly at them at night

our car doesnt have the 4 pin flat socket. i plan to hard wire the product. the supply wires are as follows 1. Ground 2. Running light 3. Brake 4. Left turn 5. Right Turn 6. Reverse the product i bought has 5 terminals / wires ; 3 colors - red, amber, and white 1. Ground 2. Running light (red low beam) 3. Left turn 4. Right Turn 5. Reverse i do not know where to connect the brake supply wire from the car to produce the high red beam

I have a tail gate light bar on my 2016 Silverado and I bought a harness adapter the goes in between the factory harness and the bumper plug and has a 4 pin connector on it. No need to splice factor wiring and I tapped into the center wire(reverse light on the adaptor

Is it still working?

Holy crap show the install already ! Waited too long I’m out.

@tyl3raz7

3 жыл бұрын

Ok matthew? Lol gtfo already

If u splice that way you should use a punch to separate the wire core to make 2 half's then stick your wire in the middle then twist now it will not just unravel and u get a more secure connection

Beautiful light bar definitely worth the money

I'ma stick one of these on the top of the hatch on my Mazda 3

Dude, sick color on your truck

OPT 7 60" light bar amazon plug n play , put one on my 2014 GMC Sierra , less than $200

How did you tap into the reverse light? Did you pill the rear light out ? And what wire? Thanks.

I have the same light bar. Love how bright it is. Keep the vids coming.

@garydp9760

5 жыл бұрын

I'm not liking how half the bar lights up for turn signals, imo, just a single outer light or sequential from center out and then the factory light to come on during last sequential blink. Does someone make that kind of module to do that...

4 жыл бұрын

Gary DP Dude. I was thinking the same thing.

how is it holding up $250 is a lil steep

I have a 2016 ram 1500 and my tailgate bar has a separate brake wire……where can I tie that into……it doesn’t work properly if I tie into the tail light wire…… any advice?

So while I'm only looking for a reverse light bar, holy crap $300 today on Amazon for this Blade.....still looking.......but a question for ya, I suppose your truck does not have "Trailer Light Out Sensing" because if it did, wouldn't the truck think a trailer is always connected? On my 19 Ford, when I plug in a trailer (essentially the same thing as you tapped into), the truck knows the trailer is connected. Just a thought....

so you covered the hole that accepts the spare tire crank???

I wish the flash for signal was red color to match the oem tail lights.

Every 16 year old kid and/or Mexican loves this mod.

You are truly amazing and I enjoy all the videos !!!

This is fukn GREAT! Now i know exactly what I'm installing on my truck instead of the hitch lights. Thanks for the vid and that's an awesome truck.

Make one of the future mods full led tail lights to match the led light bar. Like smoke color

Looks good nice install. I would have went red for turn but that's just me! Love the green!

Hey man, that is some bright lights, I have a RAM 1500 and I need to figure out how to rig up a movable light bar for retrieving a boat at NIGHT, there are NO lights at the ramp i am always at. I wanted to light up the whole area because it's a sailboat, not a motor boat it goes on differently and you have to see things! Is there any way to make up a connection for this situation?

@ryanmayer have you gotten stop by a cop cause of the brightness

A plug in t connector or shrink butt connectors and should be using a 5 flat connector like what is used on a boat trailer with electric brakes so you have the 5 th wire for reverse lights

Of your doing this they make a T connector that plugs into the back of your 7 pin plug and gives you the wires you need so your not splicing. It a much cleaner install and much more reliable.

Perfect way to destroy factory wiring there are much better ways to splice wires

@cjbales1981

6 жыл бұрын

Omfg seriously! Im in michigan, those wires would be dead by next spring 😂🤣😂🤣😂🤣😂🤣😂

@JC-1171

6 жыл бұрын

Cj Bales I am in Ohio and thought the same thing other than that looks like a cool light bar

@SugmaDLigmaNutz

6 жыл бұрын

Agreed!

@peterpro2a

5 жыл бұрын

There is a 3 way split that uhaul sells for about 20.00 and all one has to is just unplug them and put the splitter on I did it to my Tahoe. Oh wait this was a dodge right. Fuck it don't worry about it then the truck wont last much more lol

@yourselfdotcom

5 жыл бұрын

Nevermind this is a great application to use a powered relay.

Thos was great. I'm confident I can do it. Keep this videos coming, thank you.

Bought one for $12 on eBay on accident. Been using it for 2 years and all the led's still work. Has full function also, hazard flash, left/right blinker, brake and reverse light. The mistake was worth it lol

@trx500fm1

5 жыл бұрын

You didn't get a Putco Blade for twelve bucks.

Never really liked the O'Reillys/autozone ones but i didn't know something of this quality existed. Looks really good and clean. All you need now is some LED tails to match.

@ryan2546

6 жыл бұрын

Working on that very soon 😏

Nice light. But damn, was your truck stuck between the garage door opening? That there are some tight spot...lol

Super cool that it has feature for reverse

I have a 21 rebel, with this setup can I still plug my boat trailer in with no problems?? Thanks great vid

I have same bar and love it when it works. Everything is wired and correct but occasionally the reverse light doesnt work

Did you check that you can get the spare tire crank bar extenders into the hole you just covered up with the light bar? You're going to bust the thing cranking down the spare.

I would recommend removing the tailgate to install much easier. Also, it looks like you installed the lightbar right over the spare tire removal opening? How will you drop the spare?

@UpStuff

4 жыл бұрын

HPIII looking for that option is the only reason I watched this ( I also have a ram ). Then he went right over top of it🤦🏻‍♂️

@Ken-hh3zf

4 жыл бұрын

@@UpStuff This is also the only reason I watched this video. I wan't one for my 2014 Ram 2500, but I also want to be able to lower my spare tire,

Why are my turn signals always hot no matter?!. I went thru the 7pin cable… the right and left turn signal stay lit no matter…

Highly doubt you’ll see this question lol but worth a shot did the reverse light give you more light visibility while you reverse.?

Bro dont tell me to watch something like 8 times, I'm looking at my phone what do you think im gonna do look away?

Hey bro why just not connect it directly into the 4 pin connector is there a difference other than making look much cleaner without the wires being visible ?

I want to get one and put it under the tailgate but inside the flap so you don’t see the light bar directly, but you still see the light. So I’d be installing it across and above from where you did if that makes sense

That is sick!! Im most def getting that for my baby diesel.

isn't there an a adapter you can buy that's plug and play ????

Ryan going back to an old video for some help I like how you set this light up but I wanna run flush mount leds in my bumber could I hook them up like this for reverse and then have it on a switch were I could turn them on when ever

I wanna get this but for the use of shooing tailgaters and people who use high beam lights

Thats sick bro. Great 👍🏾 install video.

I love that tailgate light bar. You're whole truck is awesome and yes that tailgate light bar is really bright. Awesome job.

Can you still get to the spare tire hole???

Hey my bar didn’t come with the packet of adhesive stuff

Are these better than than the recons?

That was a good video I never realized you could put a light bar in there. I'm going to try to look for more videos of your truck because I like that color I want to see what the rest of it looks like I actually painted a old school Craftsman tool box the same exact color came out cherry and nobody else's got anything like it

Is the light bar too bright for the backup camera? Would be nice to see what the dash screen looks like when in reverse.

Would love some of your LFTD decals how do I order

Is this better than Recon and Opt7?

WOW... ... That is so cool.

Just saw on your IG story you were going to upload. Love watching your build. 💚 #NotifciationSquad !!! :)

@thefutureofyesterday8136

5 жыл бұрын

Seems like someone is having to result to picking up a guy from a you tube truck video?? Ehh..... first red flag.....

Looks good only reason I care for them cause of the blinker I can't stand that the light bar is a blinker (IMO) looks tacky

@SugmaDLigmaNutz

6 жыл бұрын

Sequential > blinking

@charlietuna5962

5 жыл бұрын

You can leave off the left/right blinkers, and utilize the tail light portion of the 7 pin trailer adapter and have running, brake, and reverse only.

I like the look I just wonder why they made the light with amber turn signals? Being in the rear it’s always red. That’s the only thing that stands out to be a bit odd. Definitely bright and visible though.

MICTUNING Triple Tailgate Light Bar ?

Nice job. There is a plug and play harness for this too it looks like.

Great job. I like to add it to my 2022 Ram Rebel. 🇺🇲🤙🏻

Nice job!

What's the model number of the putco blade tail gate lights. There are too many versions. Great video guidance. Thanks

You should definitely invest in some L.E.D breaklighr bulbs so that they are just as bright and so they wont fade in and out

Looks good man

Does this mount cover up the spare tire release hole? And are you able to drop the spare tire with this on? I’ve heard of some people having to remove the plastic hole cover so the bar mounts flat, how was it in that area?

@ryan2546

6 жыл бұрын

This light bar can be removed from the mounting brackets to get to the spare tire and the brackets stay on your truck! And it pops back in! I removed that part from editing made the video wayyyy to long and I can even use the 31” spare anymore 😂😂! But amazing design!!

@dellolio88

6 жыл бұрын

if u use the plastic brackets it will give it the same space as the plastic spare hole the light will even shit on the plastic hole but the plastic brackets do break easy so be carful i broke the tabs on mine and just took them off and put 3m on the light its self and took off the plastic spare hole

If you have a backup camera jus white it out. But if you don’t this is stuck a great idea 💡

Im thinking of buying a Toyota Tacoma to get around im not comfortable in big trucks do you think a tacoma will be a good starter?

@jamesm.8392

5 жыл бұрын

Go Big or Go Home.

Would have been better to use a butt splice or a t splice and some soulder just something to thing about wrap and tape isn't the best way

Now you need to wire up a switch from reverse light to light bar so when someone is riding your ass you flip the switch and blast them with the bright white light lol