When take the back WHEEL off remember to place a nickel or a coin or a washer will do between the brake pads AND DON'T PLAY WITH THE BRAKES UNTIL THE WHEEL IS BACK ON. Otherwise the pads will close and they are a nightmare to prize back open

@SheffPurp

21 күн бұрын

I work for Citi Bike. I know this all too well. I'm an E-Bike mechanic 🤣

I do not believe I have seen a better instruction video. You were right on perfect. Thank you so much Jeremiah.

19:29 New Gear 7 is like adding an Overdrive to a car. Awesome improvement.

The absolute best guy for Lectric reviews and upgrades....thank you Jeremiah !!!!

@JeremiahMcintosh

2 жыл бұрын

Thank you Keith I really appreciate that!

I love your videos. Withing a few months we'll have 3 new ebikes in the family and one will be the Lectric XP step-thru so I've been having fun educating myself by watching your videos. You're doing a great job and I like how you cover the nitty gritty details and don't just assume we all know how to do these types of mods already. Also, having the Amazon affiliate links to the products you have added is a huge bonus for all of us. You get some pocket change and we get the correct parts. win win

@JeremiahMcintosh

3 жыл бұрын

Thank you Mark! Glad you are enjoying them.

Thanks for taking the time to do this Jeremy. This is the first upgrade I mad on our two XP ST's. I used the 11-34 tooth because we have lots of steep hills here in Utah. Your video mad it a breeze to do this work.

@JeremiahMcintosh

3 жыл бұрын

Awesome and glad you found it helpful! Feedback like this is greatly appreciated and what keeps me creating content!👍

Jeremiah, Changed my freewheel today without any issues thanks to you. Your videos are very helpful and very informative! Thanks so much!

@JeremiahMcintosh

3 жыл бұрын

Awesome! Glad my videos helped! 👍

Finally replaced mine a month or so back and what a difference it makes when going 28 plus mph. I took pictures all the way thought the process, helps a lot. Great video Jeremiah. -- Chris @ LectricTraveler.

Great video, very helpful, just swapped out my freewheel on the XP 2.0, amazing improvement!

Excellent commentary. I'm upgrading from a 2016 vintage ebike so the comparisons are helpful to me. Thanks.

Fabulous instructions! Followed it to the T, first bike took about an hour, second bike in under 20 minutes. Great job Jeremiah!

@JeremiahMcintosh

2 жыл бұрын

Thank You Gary!

Super informative and helpful. I've ordered my parts and can't wait to change them out!

@JeremiahMcintosh

4 жыл бұрын

Glad it was helpful and I love the new freewheel!

Awesome!! I’m loving the xp modification series! Jut received the seat and post from the last video and it really is a must. This is next:)

@JeremiahMcintosh

4 жыл бұрын

Awesome thank you!

Great job with the freewheel replacement Jeremiah! I've had my parts for awhile but glad I didn't try this on my own XP before watching ypur video!

@JeremiahMcintosh

4 жыл бұрын

Thanks Mark I’m glad you liked it!

Great video, very helpful. For any newbies, if you have never removed a rear wheel before, one thing I like to do is before I tighten anything, I give the wheel "a good spin" to make sure everything is lined up and no squealing; brakes or tires, etc.

I just changed my Freewheel on my XP and it absolutely does make getting to 28 easier. Really glad I had your video also cuz I bumped the nuts and washers by accident got them out of sequins and had to look at your video to make sure I put them the right way :-) I took my brake caliper off and it made it much easier. It went right back on with no adjustments. The whole change wasn't 10 or 15 minutes.

@JeremiahMcintosh

3 жыл бұрын

Awesome and I’m glad you found it helpful. 👍

I just ordered an XP 2.0 yesterday...I was going to get the 3.0...but circumstances wouldn't allow me to. One of the main reasons I had narrowed my choice to the 3.0 was chiefly due to the freewheel difference between the 2.0 and seeing you make the switch, I really appreciate the work you've done to let me know that I CAN do it myself if I want to make the change (which I probably will sooner or later). Keep up the good work. As far as ebike channels go, yours is one of the most thorough and informative I have found to date.

@JeremiahMcintosh

Жыл бұрын

Thank you @AdventureTech I appreciate that.

I need to do this for my next upgrade, I have been hearing alot about it. Love your videos! I have been doing similar ones for this bike on my channel. Thank you for this!

Just did that on my Gen3 ebike. Thank you! I didn't have any space and I had to adjust the derailleur but all good now.

Your method to spread the frame looks quite reasonable - no tools! Thx.

Great video and amazing camera work man... thanks for the information and good examples of what to do and not to do!

I have a Sondor's SX bike land love it, but as you said earlier in the video once you get to higher speeds on the bike it's like your Wile E Coyote running in the air before the big drop. I didn't change the freewheel since I didn't know which one to get but now I do. I did change the crankset of the bike to a bigger size instead of the stock. That made a whole lot of a difference in the pedaling now. I can crank the bike with the higher speed and get more speed out of my baby. I plan to also change out the freewheel now that I know which one to get. Thanks for the video.

This video was super helpful for me. Having never really worked on bikes, this gave me the confidence I needed. I'm a little embarrassed that I had fully tightened the wheel back before I realized I needed to put the chain on while putting the wheel back, which is a little awkward. For those with step-thru 2.0 like me, I didn't see a spacer disc anywhere while changing the free wheel. But the new freewheel seemed to work fine even so. Thanks again!

@JeremiahMcintosh

Жыл бұрын

Great to hear you got it working!

Jeremy, you are an excellent instructor! The best, in my book. Your making sure we know the smallest of details is far better than anyone! And your camera work is superb! No one takes the extra time to make sure we see exactly what you want us to see. I was excited to order the parts to do this mod and remembered that I have the Lectric Light, that only has one gear!!! Ha! Ha!

@JeremiahMcintosh

7 ай бұрын

Wow, thanks! I really appreciate that and thanks so much for watching and appreciating the work!

I just got back from the garage doing this freewheel swap on the 2.0 version. It seems even easier to drop the rear wheel in the frame than in your video. Thank you for a great guide, learning tool and portal to a better bike. The test drive was great and was well worth the $55 to upgrade

@JeremiahMcintosh

3 жыл бұрын

Awesome! Glad you like it!

Great video. I just added on my XP 2.0, 11-34 and had no spacer to remove like your bike, and everything fit perfect with no issues. I wish I had a 9-34 instead because I fell like I need more paddle on high speed and the 11 is better but still could do better to keep 30mph. My weight is 215Lbs. Better life at high speed with some hills is 10 miles. I will be adding a 2nd batter to get me 20AH and 20 miles range.

Again, an EXCEPTIONAL VIDEO; thank you, well done

Thanks for your informative videos...I have been waiting for this one and look forward to the results in your next one! I have mine on order for May delivery and I have been keeping busy watching and learning from your series. I now have parts on order for upgrades so I'll be prepared when shipment arrives....again THANKS for taking the time to help others out and keep up the good work!

@JeremiahMcintosh

4 жыл бұрын

Thanks Brian I appreciate you watching them i’m glad I could be helpful!

Great video! Followed it step by step and it worked beautifully to change my freewheel! Thanks! My gears match my motor speed pretty well now...

@JeremiahMcintosh

3 жыл бұрын

You’re welcome. I’m glad you found it helpful.

Jeremiah I just ordered my lectic xp step though model in white model this morning thanks for giving me best advice

Great video. Thanks for your efforts in helping novis bike mechanics in doing their own upgrades.

I completed the upgrade thanks to your video. Ran into a bit of trouble with my XP 2.0 ST that is different from the video, my bike did not have a removable spacer behind the original gear so when I installed the replacement the gears were way out of alignment and had to do some major adjustment. Luckily I found a shimano derailleur adjustment video and problem solved. Oh and the upgrade is awesome no more freewheeling here.

@JeremiahMcintosh

2 жыл бұрын

Sweet! Glad you got it working! Happy Trails.

I just want to say "thank you" for posting this video! It gave me the confidence to change my freewheel, and it has made a huge difference when going top speed on my XP 2.0. It is really well done and easy to follow. Great camera work under difficult circumstances. You are a good teacher. Cheers.

@JeremiahMcintosh

2 жыл бұрын

Thank You Dan. Glad you got the new freewheel installed!

@omarromero6630

Жыл бұрын

I agree 100%

finally found it after lots of looking for the arrow you mentioned, never did find the arrow. but found the link under the show more tab way down towards the bottom. thanks

@JeremiahMcintosh

3 жыл бұрын

Ok great I’m glad you found it!

Just changed my factory XP 2.0 freewheel to an 11/28 and it went in so smoothly thanks to your video; by the way the size wrench for the freewheel removal socket is 24mm wrench.

@JeremiahMcintosh

Жыл бұрын

Glad you got it installed and working correctly. Happy Riding.

you really do a good job on your tutorial videos Jeremiah.

@JeremiahMcintosh

4 жыл бұрын

Thanks Randy. When I make my videos I try to address all the questions I would have. I’m glad you like them! I did mess up on one part of the video and it is driving me crazy but I don’t want to delete and re-upload it.

Nice seeing you wearing a helmet for your safety.i bought some clear safety glasses so the bugs would not get in my eyes for some evening riding when the bugs are out which works out great .have some great rideing.

Nice! I am still waiting for mine to arrive this May and will wait for modifying. I’ll put this on my list tho for future. I’ve already preordered accessories you’ve listed in your other videos. I can’t wait wait!

@JeremiahMcintosh

4 жыл бұрын

I remember when I had to wait for mine it felt like forever but in my opinion was well worth the wait!

Great video! I saw another youtuber showing how use a turnbuckel to help expand the frame. I needed it because it was way too tight to spread by hand. Great job and presentation!

@JeremiahMcintosh

3 жыл бұрын

Thank you! I appreciate that!

@scoop4321

3 жыл бұрын

Turnbuckle. That seems like a great idea. It would allow you to use precise yet powerful pressure to open the frame up. You only need to open it a little bit.

Another very highly informative video. I have a few of the same mods you have on your bike just based on watching your videos. Definitely will do this with my bike soon. Keep up the content.

@JeremiahMcintosh

2 жыл бұрын

Thanks Chris! I love the upgrade, it makes a big difference at higher speeds.

very much appreciate an amateurs point of view. when you look up hows tos by the pros, it always look so easy, but it's never that case when you try to do it.

@JeremiahMcintosh

3 жыл бұрын

Your welcome

Nice video just completed 1500w 52vx52v battery upgrade on my XP Still testing so far 43mph and still accelerating one word Wow!

@JeremiahMcintosh

2 жыл бұрын

😮wow

THANX EXCELLENT VIDEO AS USUAL…WILL BE UPGRADING TO AN 11-34 THIS WINTER ALONG TIRE CHANGE(GREEN) TANNUS ARMOR, NEW HANDLEBARS AND A FEW OTHER THINGS FOR MY STEP THRU…THANX AGAIN KEEP UP THE GREAT WORK!!!

@JeremiahMcintosh

2 жыл бұрын

Awesome! Thanks Ed!

Changed mine on the Lectric Premium mid drive. Funny! I support mine from the rafters in the garage with a couple of motorcycle tiedown.

Thanks just did this on my Fucare Scorpio. Didnt have that spacer to remove like your bike but i did need to readjust the derailleur to make it shift properly. All good now! So much better in high gear! Thanks

@JeremiahMcintosh

10 күн бұрын

Nice! Glad you got it working.

@tenncutt

10 күн бұрын

@@JeremiahMcintosh i get everything working!

@tenncutt

9 күн бұрын

Got it up to 32 mph today. Seemed like I was still pedaling a little fast at that speed but maybe just maybe at 67 years old I shouldn't probably go that fast!

Great tutorial! I may change the freewheel when I change my rear tire.

Just did this upgrade and it's definitely worth it 👌

@JeremiahMcintosh

3 жыл бұрын

Absolutely! One of the best upgrades for sure!

@pablojonathanduranra

3 жыл бұрын

@@JeremiahMcintosh why did u had to change it? And tell me the difference between the original freewheel and the replacement one of you don’t mind and thanks

@JeremiahMcintosh

3 жыл бұрын

Check out my video here and it will show why I changed it. kzread.info/dash/bejne/a5iIycScqbyycqg.html

Awesome I have been waiting for this!

@JeremiahMcintosh

4 жыл бұрын

Thanks Steve!

@stevennutting

4 жыл бұрын

@@JeremiahMcintosh I just got done with mowing as well except it looks like your lawn probably takes a lot longer then cutting mine. 😁. Getting warm here in Idaho too! Can't wait for the ride test as it would be nice to be able to hold that higher speed easier. Thanks for you work

Thanks so much! I changed mine out without a hitch.

Thank you for tutorial. Helped me out.

Love all your videos. I have ordered 2 xp stepthru bikes.

@JeremiahMcintosh

3 жыл бұрын

Thank you!

Thanks buddy. Just changed mine, big help.

@JeremiahMcintosh

3 жыл бұрын

Awesome!👍

Getting my xp2 next week. Will be my first upgrade I make

Yeah I did the same thing on my Ecotric fat tire bike so now my 6 and 7 gears give me a better ratio while keeping the 28 teeth etc for hills etc. Thank You

@JeremiahMcintosh

4 жыл бұрын

Thank you! How do you like the Ecotric? Do you have the one with the 500 W motor?

@remixread

4 жыл бұрын

Jeremiah Mcintosh I am very happy with it and the company has been very responsive when I had a S900 cable fail. They sent a warranty replacement LCD right away. I have the 36v 500 watt motor, but I also added a 500 watt 36v mxus motor to the front with a second controller and sw900 lcd. The bike no longer slows for hills, but the gear ratio made a night and day difference so I no longer over spin the cranks in 6th and 7th gear. I am 6ft 250 lbs and I get a consistent sustainable 25mph using pedal assist @ 5 in 7th gear. Thanks

U are the man. I am doing mine today

A small tip, if you get hold of a threaded bar about half inch dia. (you might have one from your front forks when the bike was packed?) , two washers and nuts, and rwo blocks of wood drilled half through the size of the bar. Cut the bar until it fits between the rear top tube of your bike with the blocks on each end. Then if you fit the nut and washers to the ends , you can use the nuts to expand the rear enough to easily clear the wheel spindles. Remove it to get the wheel off, and replace it through the spokes and tighten it again to replace the spindle . Niice, cheap and easy way to do an awkward job.

Another great video. Thanks for the “just the facts” approach.

Great job, buddy. I changed mine a few months ago and would never go back.

@JeremiahMcintosh

4 жыл бұрын

Thanks Jerry. Right after I took it for the first spin I realized I should’ve changed it along time ago LOL

Good tutorial. Thanks so much. Very helpful.

Thanks for this video. My problem was the opposite as I live in an area with very steep hills. I followed your instructions bit switched to a 14-34t Shimano freewheel, and it all went very well. The derailleur *just* misses the new 34 tooth, and it works great. Thanks again!

@mt186

3 жыл бұрын

I'm thinking about doing the the same thing. Was it a significant difference? Do you have a link for where you bought yours

@JeremiahMcintosh

3 жыл бұрын

There is a link to both in my video description. Just expand the description with the arrow next to the video title.

@libertysmith6276

3 жыл бұрын

Thanks for this video. It simplified my decision to try a 11-34 on my ebike. Also thanks to the guy that posted to your request for someone to verify the function ability of a 11-34. I am now subscribed and look forward to more videos. Thanks, Liberty

@JeremiahMcintosh

3 жыл бұрын

Thank you Liberty I appreciate that!

@ccclaw13

2 жыл бұрын

You should be able to adjust the derailleur so it catches and doesn't miss the 34 gear

Awesome video man keep up the great videos

@JeremiahMcintosh

4 жыл бұрын

Thank you Noah!

Informative video.... can't wait to see the test drive.

I put an 11-34 that you have linked and it is night and day. I mean totally different ride. The 34 was insanely nice to the point of getting goosebumps with first steep hill. I live in WV and on a hill so there's a few treacherous and some intermediate hills on my commute. I had to push on the huge ones before and now I can kick it in to 1st and pedal with absolute ease. I put it in 2nd for intermediate hills no problem. To give you an idea of how well it rides I can pedal it easily from a full stop with no motor at all and it doesn't feel like pedaling a tank. Also, before I was having trouble hitting 28 on flat ground and running out of pedal, now it's a humongous change and have plenty of pedal even when topping out. The only thing I had to adjust was the tension screw (not sure of exact name) that you can adjust by hand on the before the gear derailleur. Perfect video.

@JeremiahMcintosh

3 жыл бұрын

Awesome! I agree that it makes a huge difference! Thanks for the feedback 👍

@steveblankenship5474

Жыл бұрын

That screw is called a B screw and is available in a longer length

Excellent lesson. Thanks

Caution when mounting rear tire! Jeremiah, I did not replace my freewheel yet, but did have an opportunity to remove my rear wheel to replace tires and tubes and slime them. A few days after the repairs were complete I happen to notice my chain/derailer was very close to my tire when in 1st gear, almost touching. I compared to my other XP and noticed the other had an approx. 1/2" clearance. After confirming that my derailer and other components were not bent I attempted a derailer adjustment to no avail. I then stuck my fingers in between the frame and front of tire on each side and confirmed the tire was centered. I then compared to my other XP and realized the tire on the other XP was mounted slightly bias to the left. That is to say the front of the rear tire is approx. 1/4" closer to the frame than the left side. When I researched this it turned out fat tire bikes in general have tight tolerances between chain/tire especially in 1st gear due to the fat 4" tires. Makes sense. To fix the issue I loosened the rear axle nuts on both sides and lifted the rear of bike off the ground. I could then shake the rear tire and realized the washers with a lock tooth allowed the wheel mount to move approx. 1/8" on the azimuth . I pushed the front of the tire towards the left (or rear of tire towards the right) like the other XP and tightened. Chain alignment issue was now resolved with a substantial clearance in 1s gear. I wanted to point this out to anyone who removes the rear wheel for any reason. You need to verify that when in 1st gear, your chain/derailer are not rubbing against your tire. In retrospect, Lectric should have used a 6 speed freewheel and allowed more of a gap between the 1st gear chain/tire clearance rather than having to install wheel off center.

@13Voodoobilly69

2 жыл бұрын

Are you saying that when the axle is sitting completely seated in the axle frame dropouts with the nuts loose that the wheel is not correctly aligned and you tweaked it sideways for clearance before tightening?

Jeremiah you da man - a snappy salute to you sir!

@JeremiahMcintosh

3 жыл бұрын

Well thank you lol!

Great job, great content!

Good job. thanks for all your effort!

@JeremiahMcintosh

3 жыл бұрын

Thanks

I like your choice of gears

You'd nearly changed everything on bike dude,must admit it's looks better with your new models & seems to be more of a smoother ride. Regards.

Great vid, I was definitely looking fr this ,also looking fr vid and link on upgrading to suspension forks.. 👌

That was great thank you. 👍

Thank you. Very helpful!

@JeremiahMcintosh

3 жыл бұрын

You’re welcome

Nice job! I'm going to try this out too

@JeremiahMcintosh

4 жыл бұрын

You definitely should I think it makes a world of difference!

I found by putting a long flat head screw driver between the frame and wheel, then gently pry it open a little bit. The tire will fall into place completely in. I’ve changed about 20 flat tires on my Yamee.

Hey jeremiads thanks for the very helpful video I change my freewheel I was very easy thanks bro 😎

@JeremiahMcintosh

2 жыл бұрын

You’re welcome. Thank You

Hey buddy they now have a step thru bike for pre order maybe you & your wife might like that for her ! Keep riding & i watch all your videos 👍

@JeremiahMcintosh

4 жыл бұрын

Thank you! I have seen it and have been looking for one for her🤔

Looks good, not too hard looking. Would like to mention that now would have been be a good time to remove the tire/ innertube and wrap gorilla tape around the inside of the rim for extra protection from the spokes.

@JeremiahMcintosh

4 жыл бұрын

Good tip but I did flatten the tires enough to pinch it in to make sure the liner was installed correctly covering all the spokes.

Helpful video, thank you. Whoop Whoop

I just ordered a 11-34. My cheap chinese stock freewheel has a busted 11(7th gear). The ratcheting has so much play in it, that it bangs every time you start to pedal. You really do need that 11 for an ebike. I've never had to gear down to 1st, but my bike came with the 11-34, so that's what I ordered.

Nice video bro I'm thinking about doing that to my bike too my Red Rover 5 👍🏼🖖🏼

Great review. I just got our Xp lectric bike last week I can already tell it is awesome. The only problem is the speed o meter and trip doesn’t work. Lectric said they are going to send me a new wheele and motor. The motor is why it’s not giving the speed. I have to what to see what all I get.

@JeremiahMcintosh

4 жыл бұрын

Wow that’s crazy that you would need a new wheel? Let me know when you get it if it fixes your problem I’m curious. Thanks

Awesome job! Very complete presentation. I have two bikes coming for my wife and myself in May. I have ordered a new freewheel for my bike. Can’t imagine my wife needing the higher gear. Anyway, thanks for the tutorial. You made it look easy.

@JeremiahMcintosh

4 жыл бұрын

Thanks John although I messed up in my video on the ending and also I said the factory one has a 13 -28 but it come factory with a 14-28t 😩

@reddymon

4 жыл бұрын

@@JeremiahMcintosh No big deal. We all make mistakes. The good guys just correct their error and move on. Just like you have done.

Jeremiah, I was wondering how I would work on my bike upside down with damaging the components and computer display. Since I did not have the styrofoam blocks or bench to use I came up with an alternate idea which is great for those folks in apartments or spouses not wanting you to use the family coffee table. (-: You inspired me to to get a couple foam yoga blocks to rest the front grips on, and an 18" folding step stool to rest the rack on. Here are the links from Amazon for anyone who wants to do the same. Foam yoga blocks - folding

@a_missippian

3 жыл бұрын

for repairs on the fly get handlebarjack.com - just got mine this week - neat little setup

@a_missippian

3 жыл бұрын

for repairs on the fly get handlebarjack.com - just got mine this week - neat little setup

Thanks. This will help.

Kudos on a great channel! I just replaced the free wheel and seat suspension thingy, and it’s a whole new bike! I had already found & purchased the same ROCKBROS Bike Rack Bag Trunk Bag, which is really cool. The fold down panniers work great and you can store things in there too. The cloud 9 seat, the reflective wheel tape and other stuff you’ve shown, I’ve pretty much apeded and I am super happy with everything. This video in particular made changing the fly wheel a snap! Keep up the good work and thanks!

@JeremiahMcintosh

3 жыл бұрын

Thank you very much I really appreciate that and I’m glad everything is helpful for you!

Thanks Jeremiah, This was s great video.

@JeremiahMcintosh

3 жыл бұрын

Thank You

I think the 34 tooth would be more useful if your using the bike for bike packing or touring, just because of the added weight on the bike. But I’m definitely upgrading the gearing on my bike coming up

Nice work on the video; good camera work, and explaining each step. What was that running in the background?

@JeremiahMcintosh

4 жыл бұрын

Thanks. My neighbor started cutting grass that’s what that sound was. It never fails soon as I start recording something gets noisy 😒

Hi. Was doing real well attempting to remove the back wheel on my ST 2.0 to change the freewheel. Carefully cut the zip ties, took lots of pictures too. HOWEVER, I could not even slightly unscrew either axle nuts. It's as if they're welded on. Any suggestions?

Ordering now

I bought the tripod stands for the handle bars. They work great. Maybe deflate the tire to take it off.

Good morning 🌞

Hello thanks for video's my question is the special socket you used to loosen the gears do you need to use it to tighten the new gears you put in?

Hi Jeremiah, We Received our two XP 2.0”s a few days ago. I definitely want to put a different freewheel on. Even in PAS 5 and in the 6th or 7th gear the pedals cannot catch up to the motor, and I have not even adjusted the speed to 28 mph yet.Will the 11-28 freewheel work as well on the new 2.0 Lectric?

Hi I been seeing your video’s about the folding e-bike and I live in a 4th woke up is there a folding e-bike with high speed duel suspension rear rack and light weight that you recommend

There is a guy who made a spreader out of a 4 inch turnbuckle with cane feet that fits between the frame easily and holds it open. He posted it on KZread as well

@JeremiahMcintosh

3 жыл бұрын

Yea I seen that but I don’t need it because I can easily remove and install my wheel without the spreader.

When you put in the new freewheel, did you use the freewheel tool to tighten it? I did not see that step in your video. Thanks!

I have the xp lite with 16t and would like a 11 t what's your advice on making these changes ?

I just install my new freewheel on the Mars HeyBike. There were a few differences. The spacer ring behind the freewheel component was not present at all on the HeyBike. There also is no retaining washer with the Allen screw. Everything swapped out perfectly. I also added whitewall tires just for fun, while i was taking it apart anyway. Haven't ridden it yet but the static test show no brake drag, shamano shifter goes threw all gear and are all aligned perfectly. gonna take it out later for a street ride. I am redoing my handlebar configuration now. Thanks

@JeremiahMcintosh

Жыл бұрын

Cool and thanks for the info. Keep me updated to let us all know how it worked out after your test ride.

@stevebrighttheblackguitar653

Жыл бұрын

Changing the freewheel on the HeyBike made me able to actually pedal at 22-24 mph instead of just going through the motions. It is a very worthwhile upgrade for me on my Ebike. thanks Jeremiah nice!!!