I recently got the surge generation 1 and got it used for $ 70 but in excellent condition👍

I love the surge, from the day i got it its simply surprising that every single day i need it. I tried a lot of multitools and noone compares. I agree with "there is no perfect multitool, but the surge is the closest" I dont understand when people say its too heavy, its actually light when you compare all the tools it brings to the table. Btw i love your reviews, thanks for your videos it helped a lot in making a decision when i searched for my leatherman

@brianleverock8078

8 ай бұрын

The Surge weighs 11.5 ounces. But with what is on it, and wish there was 2 tools on it and 2 I could trade instead, Leatherman should consider just this one tool to be fully customizable, for those willing to wait for it. Not just for paint schemes, which they now do offer.

@herbcanter2114

5 ай бұрын

People complain about everything being too heavy . Soy boys

I love Leatherman Surge. I have Gen1 and a black Gen2. The biggest issue with my gen1, is the spring in my screwdriver bit holder in it. I don't use these tools that often, but when I needed it, it is worth it's weight in gold. I don't like the fact that gen2 got rid of the mini eyeglass screwdriver. If there will be gen3, they either need to bring it back, or those who are willing to wait for a special order on a surge, let them custom-build one as opposed to a customized paint scheme on it. I also actually prefer to have the file inside the handle, since I don't carry the other one to change out the jigsaw blade. most times, it is in my pocket and it weighs 11.5 ounces! Good video. Keep up the good work.

@herbcanter2114

5 ай бұрын

The tiny screwdriver is mandatory I use it all the time.

I have a gen 2 model and so far there are no issues with it's performance, it's sturdy, well built and large enough for heavy jobs, Leatherman have done a good job, if any improvements can be made I leave it to those who know!

Got my "new" Surge in 2016. The boxy edge makes the head tougher and stronger than my rebar. (I holster this Surge in the warehouse every day. Use my Blast-edc-when a micro driver is needed.) Grateful to know about the Lenox TPI blades (been using Bosch) for "made in USA" Surge work! Yes, Leatherman should upgrade to "Premium"- to keep us "Surge-rs" coming back (hahaha, they won't; they don't know it's needed). Great review, Ty.

I broke the tip off my gen 1 surge but it worked out fine, i just ground the jagged tip down a bit and did the same to the other tip to match. It looks really good tbh so im fine with it and learned you never twist with those pliers thats for sure. Ive also ever so slightly tweaked my pliers so they dont line up perfectly when you close them by cutting some wire that was evidently to much for them. Nice to see they upgraded the pliers a bit for gen two👍.

I currently own the gen. 1 surge and love it! I really like the multiple bit holders and blade and file holders. I just picked up a Leatherman Kick on the secondary for seven bucks today, oiled it and fondled it while watching this video! Best thing on this Kick is the full sized Phillips screwdriver! Thanks Ben!

@txtoolcrib

3 жыл бұрын

Thanks for sharing. That's a good deal on the Kick.

Surge-based counterpart to the Charge would be a dream, tbh.

@txtoolcrib

3 жыл бұрын

And long overdue!

@Genesis992

3 жыл бұрын

@@txtoolcrib 100% agree! Maybe one day it’ll happen and lead to Surge-based counterparts to the Damascus Charges. Now those would be dream tools!

I finally am getting a Gen2 after having the Gen1 for nine years now. I didn't know about the differences besides the replaceable cutters so very informative. Making the large screwdriver into a chisel is a great idea as I can't think of many times where I have used the screwdriver part.

@carry9937

Жыл бұрын

Can u share link. I want to buy LeatherMan Surge Gen 2.

Man that's a quality customisation, not simple but the result is neat as heck. Appreciate the review, think I'm going to go for a Surge for my first Leatherman

As always, the best multitool reviews out there! I like your attention to details and how you pointed out the improvement of the closing mechanism in the second generation. I hope Leatherman just change the function of the combination tool by replacing the can opener with a chisel. in m opinion, that would even make the bottle cap lifter work even better. Thanks for the great comparison, I'd like to see soon a comparison between the Victorinox Swisstool vs Spirit. I wish you a happy and healthy new year!

@txtoolcrib

3 жыл бұрын

Thank you. I will try to get more multi tool videos out this year. It's a balance between work and free time for me. I appreciate you taking the time to watch.

I still have my leatherman surge still my favorite heavy duty multi tool

@txtoolcrib

3 жыл бұрын

One of the best for sure.

Based upon your reviews & recommendation, I have purchased a Leatherman Surge with full Bit Kit & ratchet etc ..... I could not be happier; you have been correct on all counts; many thanks Ben

@txtoolcrib

2 жыл бұрын

Happy to help!

Another great review Ben. Thank you. Agree with your suggestions - I would also suggest adding the groove found on the inside of the plier nose of the Crunch to v3 of the Surge, and arguably provide the micro drive in the packet with the saw, which one could then be used in the groove.

@txtoolcrib

3 жыл бұрын

That's a great idea!

Of all the Leatherman family my favourite is the Surge, first purchased gen 1, just bought a gen 2, my least favourite is the OHT gen 1, for some reason I purchased the OHT & not realising this model is an mirror image on the tools, so double dutching on the tools & the bulk I'm not a fan of, in town the wingman or charge, in the field Surge is King, love the vids, 🍻 from Aus👍

Thank You for all Your videos. I hope that LM came with solid robust sheet for all together way to carry(surge, bit kit, saws, extender, flashlight and extra space for another important little things). Somthing like Victorinox did with swischamp SOS kit or swistool plus.

I got the 1.gen and my pliers also broke, I got it replaced with a 2. Gen and I'm very happy, thanks for the video

I'm still waiting for the victorinox farmer X to be on sale at Amazon I'm hoping so any way thanks for sharing this information with us happy new year Pal 👍

Great comparison of the two and a great overview of the surge. Maybe time to upgrade my supertool to a surge. Great video 👍

@txtoolcrib

3 жыл бұрын

I don't think you would be disappointed.

That was interesting. I'm a retired carpenter. I bought a surge, bits and extension bar and added a tiny ratchet that I already had in my toolbox for many years. It's about the size of the extension bar. I prefer the ratchet to be separate for speed, especially when combined with the extension bar, and to keep the fixed bit on the pliers for torque. Twice over the years someone took my Channellock electricians pliers and decided to cut live wire and each time it blew a small hole in the cutting blades. So I now have wire strippers. This is why I bought the Surge with changeable blades over the other models.

Agree about adding the victorinox tool

I just lost my beloved Leatherman Wave at the shooting range a week ago. I think I may have dropped it in the snow, needless to say I was PISSED. but this lead me to getting the new surge, I just ordered the limited black and silver version. cant wait for it to come in. I appreciate this video of the differences. I like a lot of things with these the new pliers but one thing I did like about the old wave pliers (which are the same as the old surge) are the rounded edges, It was useful when wrapping wire around the nose of the pliers when installing outlets and things like that. but im sure these new version pliers are far superior

Can't wait for you to upload gen 1 and gen to the Wave

@txtoolcrib

3 жыл бұрын

I have one that details all three generations. It's an earlier video though, I might need to redo it. I was thinking about doing an updated version of the Wave+ vs Surge as well.

Yeah I would love to see those cable skinners on a next Generation Surge

They should add a corkscrew, of course...😉. I agree with you Ben, the upgraded blade would be a no brainer. I carry the Charge daily and I really like the blade, and the first time I sharpen it, the blade was hair splitting sharp with very little effort.

@jnsky1249

3 жыл бұрын

The Charge + blade is awesome and would make the king of multitools into a demigod!

@olegyefremov2583

2 жыл бұрын

If charge didn't have those 154cm and s30v steels, then people would just stick with wave. I think that they will put 154cm on some sort of upgraded version of free p4

@thopkins2271

2 жыл бұрын

@@olegyefremov2583 Exactly. A surge+ would likely sell. But it may kill surge sales because people buying it already want the most capable whereas there is still room between the charge and wave for two price points. I love my surge and charge both…but for the price of the surge..it probably should have a 154cm blade

I always enjoy your videos! You state things concisely and in such an organized delivery. I wish you also produced videos on my other interests; shortwave radios, small handguns and cooking grills. LOL! But I’ll take what I can get. Thank you Sir!

@txtoolcrib

3 жыл бұрын

I'll try to get into some different stuff in the future.

Thanks for everything you do man. Love watching Your vid. Feel free to review any tool. I trust your judgment so much. Happy new years

@txtoolcrib

3 жыл бұрын

I appreciate that! Happy New Year!

Thanks for your review. Just got my new suge to replace a lost wingman.. The 2 tools are worlds apart! I must say, mine has turned up feeling quite "sharp" and on some edges. One part in particular is the file holder. The little hook you use to open it from the handle is very sharp and actually scratches your finger so I used the diamond file to try and smooth it but it's a bit small to remove completely. Bit of QC issue there. Thanks again. 🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧🇺🇸

Your use of the reaming aspect of the pliers is another reason a chisel would be a good option in a multi tool. That said I switched from hacksaw's and sawzals for cutting pvc or abs years ago to wheel cutters which eliminate the need to ream. Reed makes great a pair. 👍

Just picked up a gen 1 basically new for $60.00. Great buy

nice,detailed comparison,of my favourite LM. does the gen 2 have wider blades [plain and serrated]

Thinking of removing the straight blade from my Wave (because a 420HC knife blade kind of sucks, to the point where I've taken to carrying a dedicated pocketknife in D2 in conjunction with my Wave at work). I think that I could use the space where the knife is to store a couple of the Leatherman bits, similar to the on-board bit storage that the Skeletool has.

@flankman9385

Жыл бұрын

I used the wave from 2003 - 2021 in the military and never found myself saying “wow the 420HC is really holding me back”. Isn’t that interesting?

Great detailed review. ThANKS

@txtoolcrib

3 жыл бұрын

Very welcome

This video is a lilbit more than awesome.

Always enjoy watching your videos good job my next Multi tool is going to be a surge I’ve been carrying a leather since they first came out

@txtoolcrib

3 жыл бұрын

Well, I'm extremely biased. Good Choice!

Thanks Ben!

I would like to see some texture in the handle or possibly have a G-10 panel to make it more comfortable to use especially in cold weather.

I recently bought a used Surge on eBay. I was really surprised to see here the jigsaw is removable! Mine does not open at all. The Surge was bought used from eBay. Some minor rust. I think that's what is preventing the jigsaw from displacing from its holder.

Hello, thank you for your video. It’s very informatiive. I have the surge gen 1. I do have a question: will a gen 2 pliers head fit on the gen 1? Thanks.

Great video Sir! Thanks

@txtoolcrib

3 жыл бұрын

My pleasure!

Hello Ben - I watched your video again and it occurred to me that the package opener could go in place of the smaller screwdriver in both tools... I believe you had said in another video that the smaller screwdriver was redundant because of the bit system Leatherman provides...I think you had re-crafted a package opener to fit where the file/saw would normally go - if that's the case, then no changes would be needed...What do you think? Thanks!

Surge is the heart of my bushcrafting kit. With a variety of wood and metal saws. I would say, for myself, that the screwdriver bit socket and 20-head kit gives me what I need for drivers around the house. Thus, the two dedicated drivers could be replaced. With what? One stout Victorinox-like chisel & box opener slash light pry. That would be a bushcrafter dream. I just don't encounter much need for screwdriving in nature. I have ground large drivers into chisels on other tools, such as my TTi, and even my Victorinox Farmer. But perhaps some do need and use those drivers. For me--chisel. My useage rule for MTs is medium and light work only, though the Surge, Supertool. Swisstool and Swisstool Spirit I have pushed with no problem. But indeed an MT is not for sustained heavy labour. My bushcrafting is light, and my Surge kit is a huge space saver. Brilliant tool. Thanks. Good review, as usual!

@txtoolcrib

3 жыл бұрын

I appreciate your input and your point of view, thank you.

Ditch the small screwdriver for the eyeglass bit, the extender and bit kit makes an unnecessary redundancy, I also agree that a swisstool style chisel would be a better choice than the larger screwdriver for the same reasons you mentioned, really you could swap in the 154 or s30v blade if you were so inclined unless there is something preventing it that I'm not aware of, personally I would go s30v, it's not the newest kid on the block, but it's a great intersection of edge retention, ease of sharpening, toughness, rust resistance and price, I might just have to pick one of these up and see what sort of frankentool I can cobble together

I didn’t ever regret to buy surge gen2

I absolutely concure with you on the surge! For me real notch for the eyeglasse screwdriver would be great, à corkscrew and like you said the ratcheting bite tender in general!

@BladeWalker77

3 жыл бұрын

Hi from Italy, I frequently drink wine and I tested the cork screw on my Swisschamp, I have to say that wine bottles can be opened with it, but it is not very practical, I prefer the dedicated tool, but I agree about the micro screw driver, is absolutely needed. A surge with the add of the micro screw driver, is the perfect multitool in my opinion. On the other hand a wave with an awl would be great!. Last summer I used both tools on my Swisschamp and it saved my day more than once.

@TCFamas

3 жыл бұрын

@@BladeWalker77 hi Iam on the south coast of France... While I personally don't often use a corkscrew it's nice to have them on the victorinox (got the swisstool). And while I agree it's not a dedicated corkscrew it can help out in a pinch if needed. I volunteered for the holidays in an retirement home and had to improvise to open a wine bottle (needle and big syringe to pop the cork out)! While I was able to repair the Christmas decorations with my surge I suddenly felt naked without an corkscrew! 🤣

Great video as always . Do you think that its possible to fit bosh blade holder into the Wave ?

@txtoolcrib

3 жыл бұрын

Yes, absolutely. I have seen it done. Though you have to carry the tools separate, because the Wave platform just doesn't offer enough length.

I heard full dimensional bit as 4-dimensional bit and I was very intrigued

What I just realized ! My surge is from June 2013, and it's the "New" Surge, with pliers with replacable cutters, BUT, the serrations are like in the 1st gen. of surge !

Love this review. Are the bits in the bit exchanger loose? I find on mine that the clip on the end of the retainer spring does not hold them super tight - seems to have loosened pretty quickly. Curious if you or anyone has experienced the same thing on their Surge.

@txtoolcrib

3 жыл бұрын

I’ve had it happen before, but I haven’t lost a bit in a long time.

So the first gen Surge really was just like a bigger Wave and the Second gen became really it’s own tool

@txtoolcrib

3 жыл бұрын

That is actually a pretty accurate description.

@hellsing56666

3 жыл бұрын

Yeah, but first gen have the external scissor and the t shank blade exchanger, so better than a big wave. I love my old first gen surge, I need to try a new one.

@RockyMountainBlades

3 жыл бұрын

@@hellsing56666 agreed

420c enjoy sharpening, I am satisfied🤗

こんなに変わっていたんだ。比較がよくわかり参考になりました。パーツ構成は前のほうが良かった気がしますね。

great review

Hi ,love the video I own a ST300M and Surge gen 2, I live in Europe, how can I order aftermarket products for the Surge ? Like blades and etc as the Lenox thin metal ,I cannot find it products like this in EU? Could you advise me on the purchase options? Many thanks

I would like to see a similar serrated blade with the chisel that the free p4 has in the surge. Also ditch the small flat screw driver for a wingman package opener.

@txtoolcrib

3 жыл бұрын

I wouldn't mind seeing that.

I would make the plier "legs" where they meet with the pivots a little bit more wider or thicker to increase purchase and decrease any future failures. Then I would reduce the overall thickness of the handles for two reasons. One to accommodate more hands and users to the tool and this will increase more force while baring on the tool. The second is to eliminate the pliers from rubbing with the inner handles which I hate on my Surge, especially if it is black coated. It ends up removing the finishing. As far as the tools, I like the chisel idea, but with some wire stripping on the top end of the tool, not at the bottom at the pivot, so that when you close the chisel with the wire inside, you can strip it agains the handle. Maybe make the stripping blade at a 45 degrees angle to be flash with the wire against the handles. 😉

5:09 The reason your pliers head gets caught is because the stop pin on the inside of the handle is probably bent. This will cause the nose to seat too deep in the handle and catch on the bit. Bend it back and it should work good again.

Thanks for your video. I also like Leatherman very much and have Surge, Vawe+, Squirt and Skeletool. Correct me if I'm mistaken, I heard from one of your Surge modification video that you bought some details from Leatherman store. The friend of mine also have Leatherman Charge+ TTI and he used to work them hard. So serrated blade were broken at the pivot. One man tried to sharpen main blade and ruined it completely. Could you give me contact of the Leatherman store where I could buy those blades for Charge+ TTI?

My 2nd gen surge does the plier screwdriver jamming same as first gen also plier head sticks some times when as you say realy crank down on bolts but still my fave tool

Despite your dirty hands 😁, you do an excellent job in your videos. They are clear, informative, with good audio and video. Well done. Just kidding about the hands. Keep up the great videos.

@txtoolcrib

2 жыл бұрын

Yeah I know. I try to stay presentable, life of a working man. Hope it’s not too distracting.

🔴When will the third gen come out?

what is the best player in to those leatherman Surge generation 1 leatherman and generation 2

I wish Leatherman or Victorinox would add an accessory capability for the use of a scotch eye auger or drill bit. It could easily fit into the bit driver or saw/file receptacle. On a Victorinox, it could be an accessory fitting on the corkscrew like the small screwdriver does currently. There are so many times I could use a small drill bit or auger, and it would be more precise than the awl.

I got the second gen black oxide surge last year, then got the bit kit and did wonder where the micro bit was supposed to go. Does it fit in the bit extender? As I'll be ordering one soon as the extra reach will be useful. Its a great tool but a little heavy and probably overkill for my needs I just wanted one to collect. I want to get a cybertool lite next as they look really useful for around the house and more for electrical based tasks.

@txtoolcrib

3 жыл бұрын

Unfortunately, the Surge does not have a holder for the micro driver. It is on the Wave and Charge, but not the Surge. I did make a video on a couple of different ways you can still you the micro driver on the Surge. They are not ideal solutions though. You may want to check it out.

@rDanny

3 жыл бұрын

@@txtoolcrib cool thanks

@edgaraquino2324

3 жыл бұрын

Check out Igor Kabakov on youtube he offers a solution that might also be helpful...

@edgaraquino2324

3 жыл бұрын

@@rDanny Check out Igor Kabakov on youtube.He offers another solution that might be helpful...

Is the p4 as strong as the Surge. And when will the new generations come out?

Very true good point grasshopper

Hello sir ! Really enjou the content and knowledge you give on your channel ! I would be very interested in watching a video where you discuss your ideal, perfect, dream multi tool, like if you could a custom made one. Happy new year sir

@txtoolcrib

3 жыл бұрын

Well first of all, thank you. That is a good suggestion.

Can You put the micro driver on a Gen 2 (in place of the smaller flat head screwdriver)..?

Hello. I have one question..I have a surge 1st gen and I want to buy a wave+. The pliers are compatible?( to put the pliers from wave on surge) thx

I don't know why they don't offer a bit that will hold the microdriver so that you can still use it

@ucitymetalhead

3 жыл бұрын

Yeah that's a good idea, I was tempted to make one but it seems like too work.

@txtoolcrib

3 жыл бұрын

Couldn't agree more.

@kevola5739

3 жыл бұрын

I think if they put a recess inside the bit extender for the micro driver it would give you the option of using it as a stand alone mini driver or attach it to the multi tool for more torque. I do agree that a bit that holds the micro driver would be a great idea as well in case you broke the micro driver.

You mentioned pulling cotter pens , when pulling one I grap it with the cutters and pry up against what ever its retaining, wondering if you think the free p series can handle that side load? I haven't had a p free in hand. Thanks

@txtoolcrib

3 жыл бұрын

That is a good question. In comparison to the original Surge, I would say they are probably stronger. That is not true of the current Surge and SuperTool 300 though. It would be a pretty heavy task, even for the stronger pliers on the FREE series though.

@streettuff2623

3 жыл бұрын

@@txtoolcrib I carry the 300, and it is hard on the pliers, I haven't broken any. But I was really more concerned about the handle construction and the handle, plier connection

After 3 1/2 year I broke my Wave, left on the back of the car and drive off, when I went back and found it the blade was broken and it’s a little bent and earlier I broke the scissors the wave was a good edc but I did find it’s short comings.. .. got a surge to replace it today and straight up it’s a better tool for work edc for me, I would like to see a better steel for the main blade.

Have you seen "Metro's Q-Branch" no 4 scalpel holders for the surge and the wave? I recently bought some no 4 scalpel blades and was surprised at how sharp and strong they are compared to no 3 size.

@txtoolcrib

3 жыл бұрын

No I haven’t, but that sounds very intriguing.

@petermoore9504

3 жыл бұрын

@@txtoolcrib They have a Shapeways page with a few different tools - definitely worth a look,. Cheers

@Genesis992

3 жыл бұрын

@@txtoolcrib Q-Branch has some good stuff. I have two on my Skeletools wearing different hammer ends. It also lets the Skeletool use full 1/4” bits. Super cool stuff.

@txtoolcrib

3 жыл бұрын

I'll try to check into them, thank you all for the heads up.

@MIIIB

3 жыл бұрын

@@txtoolcrib metros is Eric, owner of Skinth Solutions, the guy that make amazing sheaths in cordura. Check it out Ben. Maybe it helps. I had the XL and Magnum.

I work as a Rodbuster and from time to time i use my 2n gen Surge when tieing rebar or other stuff using tie wire. When twisting the wire i totally understand what you mean about twisting the plierhead and boy it has not broken yet. So yeah it's good sh!t

@XWITEhackerX

3 жыл бұрын

Awesome video man i really enjoyed it! Greetings from Sweden

@txtoolcrib

3 жыл бұрын

Good to hear. The Surge is the best out there in my opinion.

Hello, Ben - excellent overview of the Surge...I am very happy with my New Surge(2ndGen)....you might want to check out Matt bigmonster's review of 1 and 2 here on youtube. He has some interesting comments and with your knowledge of the Surge I am curious to see what you think of them...Thanks! A Happy Mother's Day to your family!

@txtoolcrib

3 жыл бұрын

I will try to check them out.

any idea when Gen3 will available to buy?

Do both models accept jig saw blades?

That's a wire cutter above the crimper on the back? 3:14

Iove my Leatherman Surge . Not sure G10 would work with a heavy duty tool like this . I know G10 is extremely strong but it may have to much play . Maybe that’s why they haven’t made a premium version yet ? 🤔 who knows .

I wouldn't really need a third generation. But I would love a Charge + TTI like version with better steel on a few tools.

What about N690 on the surge?

something about the finish in the gen 1, still made in mexico , since it misses the USA logo

Gerber center drive?

I really wish they offered a aftermarket blade for the surge in sv30 or sv90 that you could buy as a stand alone blade. I'm sure if you know a good machinist with a shop they could fab you up a blade out of quality material at a reasonable price I just wish Leatherman or another company would look into mass producing high quality after market Leatherman blades there is defiantly a market.

Fellow texan, where can I get that mat with the flag?

@txtoolcrib

3 жыл бұрын

I had to piece it together. I looked high and low for one and couldn’t find one. It is a flag under a clear mat.

Love my surge, need to get mine fixed, I beat the hell outta mine

@ about 6:30 - they should've done that on charge tti +... P.S. Does anybody except me notice that charge tti+/wave+, when pliears are in use, can pinch one's thumb as hell? Like, realli really pinch, kind of a bite the chunk of skin off pinch? Bad work there, guys from Leatherman...

Классный обзор. Я на грани покупки.

I snapped the gen 1 pliers twice and the second time they replaced them with the replaceable cutter version and it wouldn't close properly without finessing it. I was not amused.

@txtoolcrib

3 жыл бұрын

You don't care for the newer version pliers?

Just an update here Jan 2022, the ratcheting driver bit exertion is now available, and you can get the SURGE with the higher grade steel cutting blades now too.

@txtoolcrib

2 жыл бұрын

Since when can you get higher grade blade steel with a Surge?

@MikeBaxterABC

2 жыл бұрын

They sell them on eBay

@txtoolcrib

2 жыл бұрын

Could you be more specific?

@txtoolcrib

2 жыл бұрын

I don’t know why your comments keep getting taken down. I’m not taking them down.

@MikeBaxterABC

2 жыл бұрын

@@txtoolcrib I can tell it's auto delete .. maybe they don't allow multiple links? ... no worries however :)

I want to buy LeatherMan Surge Gen 2. Can anyone share link please. Thanks

I'm still waiting for that pohaku review😐😂

Gen 3 surge will be called the leatherman serve

Please help the surge gn 2 plier aria best compair to surge gn 1 love from India

Surge is my favorite. Period. I will like to see for third generation a 3D phillips instead of the bottle opener. Cable cuter with the large flat driver Larger small flat driver like Rebar AND SV30 steel!!!!!! They need to add premium materials

@txtoolcrib

3 жыл бұрын

I think blade steel change ranks highest for me.

@hammurambi

3 жыл бұрын

I agree on the blade steel upgrade, but I think CPM154 would be a better option than S30V. S30V is a very expensive material and would drive up the price of the tool quite a bit.

The only thing I disagree with you about is the 154cm blade steel you talked about and yes u menchemed it but personally I like softer blade steels like what the steel the surge comes with now. It’s just my opinion but for me the blade is a good steel and it’s easier to sharpen.

I don’t like the replaceable wire cutters they don’t cut stranded wire good. 🤔

I got my surge few weeks back. Very happy about it. But i made the mistake of buying the black oxide. I reckon stainless steel is much better.

@txtoolcrib

3 жыл бұрын

I like the stainless versions, but it is all personal preference.

@winstonholmes5566

2 жыл бұрын

They are all stainless. Even under the black oxide it’s stainless from what I’ve found. BO is better I think because it adds grip and corrosion resistance.

Tools such as chisels can be made from old jigsaw blades......ive made my own,you just need access to a mini cutting/grinding tool like a dremel........the options are only limited by you ingenuity.

Blades on G2 are easier to open because the new shape of blade guard.

@txtoolcrib

3 жыл бұрын

Dang it, I knew I was forgetting something.

@kampferlin2079

3 жыл бұрын

@@txtoolcrib now you have to redo the whole video again. Lol.

@txtoolcrib

3 жыл бұрын

You know it never seems to fail. Then I get bombarded with comments saying I have no idea what I’m talking about. Lol.

@kampferlin2079

3 жыл бұрын

@@txtoolcrib Haters are going to hate, don't worry about it.