Leatherman Raptor VS SOG Parashears

Let's find out which manufacturer makes the better trauma shears.

Пікірлер: 190

  • @jhill4874
    @jhill48743 жыл бұрын

    We bought our daughter the Raptor after she got her RN. She loves 'em, but no longer uses them in the ER. She doesn't need all the EMT tools in a facility. So we then got her a good set of standard shears with spring clip in the handle. Much more practical for her. She now carries the Raptor in her car emergency kit.

  • @iamfuckingyourwaifuandther2743

    @iamfuckingyourwaifuandther2743

    3 жыл бұрын

    Get her X Shears, she will love them.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I have been meaning to try those.

  • @behoushi

    @behoushi

    3 жыл бұрын

    I’m an RN and I agree, the x shears are way better for working in a hospital.

  • @kinguin7
    @kinguin73 жыл бұрын

    Having compound leverage seems kinda gimicky when it's paired with the less rigid blades.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I agree.

  • @Lup0Solitario
    @Lup0Solitario3 жыл бұрын

    The leatherman has kind of a small teeth on it's lower shear, that can hold on any threaded material while cutting plus the fact that leatherman shears are thicker which made it better to cut any rope like materials.

  • @kill-shot1186
    @kill-shot11862 жыл бұрын

    I used the seatbelt cutter to cut a carpet once. It cut through the entire width of the carpet in one continuous pull. Like butter. I recorded it and showed some friends. I also cut a torqued tshirt and safety vest from a guy caught in some machinery. It was twisted and torqued so tightly that the guy was having a hard time breathing. We got shears to cut the twisted fabric but cheap shears were bending and separating. Unable to cut. My Leatherman shears cut through with a few pumps of the handle. Many guys saw how my shears performed now i see more and more Leatherman shears on their waists!!!

  • @voidpunkprincess
    @voidpunkprincess3 жыл бұрын

    Most important questions for trauma shears, how difficult is it to clean dried blood, gunk, and trash from the joints and how often/easy is it to take apart, sharpen, and service?

  • @LittleUrbanPrepper

    @LittleUrbanPrepper

    3 жыл бұрын

    Good luck cleaning these 😂

  • @colinmartin9797

    @colinmartin9797

    3 жыл бұрын

    As a medic who uses the raptors... Get friendly with your hospital's autoclave. The SOG looks like it should be reasonably clean-able but you will never get under the buttons on the raptors. They have to be autoclaved . They also pretty much can't be taken apart (I have broken several star bits trying to budge the center bolt) and the toothed profile means that they can't really be sharpened without needle files. also, the thick blade means that as the pivot loosens over time, you can't straighten the blade like you could with the SOG. Also, Leatherman has left me high and dry on support for it. I'm a very unhappy customer for the raptors after years of tolerating them. Toolcrib here's awesome video sold me on trying the parshears, which have a lifetime warranty and SOG offers 50% off for first responders.

  • @LittleUrbanPrepper

    @LittleUrbanPrepper

    3 жыл бұрын

    @@colinmartin9797 I'd just carry a simple thick bladed one. And carry a leatherman or large victorinox in addition. Some things simply shouldn't be multitool.

  • @colinmartin9797

    @colinmartin9797

    2 жыл бұрын

    @@LittleUrbanPrepper The only thing that the raptors had going for them was that absolutely perfect belt system. If leatherman just made a belt clip that held a standard pair of penny cutters like they do the raptors, I'd buy that thing in a heartbeat. As it stands, the SOG have been easier to clean and more durable than the leatherman raptors. If a compact, folding trauma shear is important yo someone, I'd point them that direction.

  • @AlexanderMason1

    @AlexanderMason1

    2 жыл бұрын

    You can take the raptors apart VERY easily to clean them and put them back together. You can also sharpen one of the blades on them (the smooth edged blade) but not the micro-serrated edge blade as the serrations are so tiny not even a needle file would be able to sharpen them. The good thing about the serrations though is that they grab the material you are trying to cut and prevent that material from “slipping” forward as you cut. That being said you can get them sharpened by leatherman. I will personally just sharpen the smooth side until they don’t cut anymore, then get them serviced by Leatherman.

  • @animademachina2747
    @animademachina27472 жыл бұрын

    Cool review this is the kind of thing I use my leatherman for thin plastics, rope, ties, they work fantastic

  • @sdecarlo
    @sdecarlo3 жыл бұрын

    The Leatherman also goes well on a mollie carrier. I often use it in that configuration.

  • @duo315
    @duo3152 жыл бұрын

    Trauma shears serve two main purposes, in my experience: cutting clothes off and cutting wound care supplies; tape, gauze, etc. Frankly, my raptor has been unused for 7 years because it doesn't fit well in my hands. Wiss scissors are a godsend though. They're sharp, inexpensive and cut through anything

  • @nilsklemp5772

    @nilsklemp5772

    2 жыл бұрын

    They have one more purpose... Cutting open a thorax🥴

  • @duo315

    @duo315

    2 жыл бұрын

    @@nilsklemp5772 I guess the thoracotomy cart in our icu can be replaced by a pair of scissors

  • @kennywheelus6857
    @kennywheelus68572 жыл бұрын

    My sister just got into the medical field an I think she'd love a pair of those,I'll get her a pair an probably some for my bugout bag

  • @ElTeerino
    @ElTeerino3 жыл бұрын

    In my mind these aren’t really the same tool. Similar. But the Raptors are very emergency response specific in their design, whereas the Parashears seem like they are meant for survival or all around EDC with those additional tools. I feel like they both have their place, but not the same place.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    That’s a fair point.

  • @Genesis992
    @Genesis9923 жыл бұрын

    This was an interesting video! The only raptors I have are the glowing twins. I haven’t used them for anything, however.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I love the Raptor Shears, use them all the time for cutting through rubber and industrial belt material on the job.

  • @oldman975
    @oldman9753 жыл бұрын

    I got the Raptor for Christmas and I love it.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I like the Raptor a lot.

  • @danielmarshall4587
    @danielmarshall45872 жыл бұрын

    Good comparison, in fairness to the SOG's lack of pocket clip.... I have the Raptor and carry mine loose in my trouser pocket, so given that closed they have a similar sihouette the SOG could probably be used/carried in that manner. Again great video, cheers.

  • @weston407
    @weston407 Жыл бұрын

    I have a Raptor and absolutely love it - I'm a FF/paramedic and use it almost daily

  • @willb3018
    @willb30183 жыл бұрын

    Very useful comparison. Thanks.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Absolutely, thank you for watching.

  • @traumajock
    @traumajock2 жыл бұрын

    We're mulling over both of these for EMS week gifts. The Raptors are $79-plus, the SOG $63 with free shipping. For something that will be easy to lose on a chaotic scene in the dark. Like a crowded beach full of drunks like we have a few times a year. Regular trauma shears from somewhere in Asia are a dime a dozen. One of the helicopter services throws them out like pens and mouse pads. Few folks even carry anything remotely like a multi-tool. They're too cool to carry anything on a belt, especially females (you know its true). I can barely make the females on my shift wear a radio. Some kids tend to go into a house empty-handed. I stomp them like roaches (after the call). Some are almost too cool to carry their own pen or notecards, but always seem to need mine. A few younger guys have Raptors on those fire dept. radio slings, which are just another (but somehow cooler) version of the rookie batbelt that we like to laugh about. Yeah I have one, been using it 35 years. If you get to sleep at work and don't wear a radio sling or batbelt, its hard to keep low chute-times if you have to load up your pockets before getting out the door. The alternative is to sleep with hard items in your pockets, sleeping fully clothed. Losing a Raptor on a scene would be like losing a Littman stethoscope. Stuff grows legs and walks, especially pretty toys.

  • @weston407

    @weston407

    Жыл бұрын

    I'm a box medic and I vote for spending an extra $15 for the quality of the Leatherman; I use mine ALL the time and don't like to be on shift without it - also, the rookie batbelt thing is hilarious and at one point I was just as guilty of that as all of the newer guys but at this point in my career (almost 10 years), the only things I really need are a flashlight and my Raptor, my most-used tool. Also, I bought a bright baby blue Littman so I could easily recognize it as mine 😎 I haven't managed to lose it yet but I know what you're saying lol

  • @tipsyteaser722
    @tipsyteaser7223 жыл бұрын

    This was the best product review I’ve ever watched lol

  • @noktturnal
    @noktturnal3 жыл бұрын

    Hands down leatherman wins, the SOG looks like it was ad-hoc put together with alot of tools that are useless for who it's made for. Also working EMS in the field and in a level 1 trauma center I have used the ring cutter many times, its a very useful tool.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    That's very good to know, thanks for your insight.

  • @najaritfelix2815

    @najaritfelix2815

    2 жыл бұрын

    I tried to use the ring cutter and actually broke the little corner for that purpose on my leatherman. Kinda bummed; they were expensive.

  • @petersteiner1159

    @petersteiner1159

    Жыл бұрын

    If it broke during the intended use, Leatherman will certainly replace it for you! That ring cutter is absolutely essential in the field…and is used more often than you might think in hospital. Time is often essential. When you need a ring cutter, you need it Right Now. (A jammed ring may trap someone in their burning vehicle, or it may cut off blood circulation to the finger. The first is a life or death problem. The second could cost someone his or her finger, if left untreated. Not to mention - a ring on a badly swollen finger is extraordinarily painful!) In any case, that feature is no afterthought. Leatherman intends it to work, to work well, and to work every time…under repeated use, for the life of the tool. Ask any medical professional, or any bench jeweler - some of whom are on call to deal with extreme cases. (You wouldn’t believe the dumb things some people try to do with rings. I’ll leave that to your imagination. You’ll probably guess right on the first try.) In any case, it should never break during use. The company will want to know that it did; and they will probably thank you for telling them. (It’s most likely a problem in heat treatment, which could affect EMTs and ER Nurses who depend on their Raptors every day.)

  • @weston407

    @weston407

    Жыл бұрын

    I'm a box medic and I use my Raptor allllllllllll the time - it's my most frequently used tool when I'm at work

  • @Jake_S_
    @Jake_S_2 жыл бұрын

    How tight should the pivot on the Leatherman be? When I got mine I felt that it was unusually difficult to open and close the blades to make cuts. I tried loosening the pivot a bit but ran into issues with the blades separating and not cutting near the pivot, so I tightened it back up. I'm assuming there is meant to be a little play between the blades when they are fully open? The blades on my pair "meet up" around the 4cm mark on the ruler. Does anyone have any insight on what the "correct" pivot tightness should be on these?

  • @Jay2984
    @Jay29843 жыл бұрын

    Great comparison. Thank you!

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    You’re quite welcome. Thank you for watching.

  • @watchncarry9593
    @watchncarry95933 жыл бұрын

    Great comparison. Thanks

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Always appreciate your views, thank you.

  • @adolfosolano1470
    @adolfosolano14703 жыл бұрын

    Excellent video!

  • @Exist_Outdoors_
    @Exist_Outdoors_3 жыл бұрын

    I was looking forward to this.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Hopefully it lived up to expectations.

  • @wesleemiller
    @wesleemiller3 жыл бұрын

    Great video.

  • @smackagaming9581
    @smackagaming95812 жыл бұрын

    Do you think either of these will cut the hard green poly strapping? I bout knipex electrician shears but they dont cut it that easily.

  • @Ayrton4everrr
    @Ayrton4everrr3 жыл бұрын

    Great video Sir and thanks

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Absolutely, thank you for watching.

  • @tmapes1989
    @tmapes19893 жыл бұрын

    Love my Raptor for cutting ranger bands. Works great for EDC. Keep up the great vids!!!

  • @nicholasgilliam2402
    @nicholasgilliam24023 жыл бұрын

    When cutting wire, try using the ring cutter on the back of the raptor. I have better results.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Thanks for the tip!

  • @concretecowboy4212
    @concretecowboy42123 жыл бұрын

    Thnxs 4 sharing

  • @tts3874
    @tts38743 жыл бұрын

    Great stuff, as ever 👍👍

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Thanks. Appreciate you taking the time to watch.

  • @half_cocked
    @half_cocked3 жыл бұрын

    I’ve carried the raptor for quite a while, only beef I have is when the sheers get dull, they won’t cut a piece of gauze, the raptors are geared toward emt/firefighters... ive used the seat belt cutter to cut jeans off patients, used the O2 rectangle to turn tanks on and off, sheers to cut clothing etc. they’ve been great, my second pair has stayed sharp being the first pair was used and have no idea what they cut with them lol, I carry mine folded in the carrier... the SOG has too much garbage to be useful medical wise, looks like they just put some regular cheap trauma sheer blades on them and useless trinkets in the handle

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I think I agree with everything you just said. Seems like SOG was trying to do too much with this one. Better to leave it simplified for the target demographic.

  • @Donatobearint
    @Donatobearint2 жыл бұрын

    The leatherman also has a lifetime warranty on them where they will take care of any issue you have with them including sharpness. I’m not sure but I don’t think SOG offers that. But great partial review on both of the products.

  • @guisspino2347
    @guisspino2347 Жыл бұрын

    As a paramedic, the raptors win purely because of the ring cutter. The cutters we carry on the ambulance are horrible. It’s not the most common emergency, but the ring cutter on the raptors blow away any commercial cutter I’ve seen.

  • @nipe2121
    @nipe2121 Жыл бұрын

    If you seek tool to cut clothing you must check S-Cut tool family. They may not be the smallest, but they cut even thick clothes like butter.

  • @messerschmitt2622
    @messerschmitt26222 жыл бұрын

    Insane tool from Leatherman!!!

  • @IlIlIlllIlIlIllli
    @IlIlIlllIlIlIllli2 жыл бұрын

    How do you sharpen the shears?

  • @ADizzle999
    @ADizzle9993 жыл бұрын

    Hey I was wondering if u could make a video about sharpening multitool knives and knives in general. My Swiss tech is dulling after about 2 months and I figure there is a video out there but I wanna hear it from u man.

  • @macgyverbryan1377

    @macgyverbryan1377

    3 жыл бұрын

    The Lansky guided rod jig works well.

  • @ryanf5503

    @ryanf5503

    3 жыл бұрын

    I was going to suggest/ask for a similar video. General maintenance for multi tools. I have particular trouble getting serrated blade and awl back in good shape after a tough job.

  • @Northanteus

    @Northanteus

    3 жыл бұрын

    @@ryanf5503 I'm total newb to sharpening knives and I got the Lansky Blade Medic for $11 on Amazon. It has a diamond rod to sharpen serrations. Try getting the Blade Medic. Of course check some instructional videos on KZread to help out.

  • @ADizzle999

    @ADizzle999

    3 жыл бұрын

    @@macgyverbryan1377 Thanks I'll check that out👍🏾

  • @ajbeau3920
    @ajbeau39209 ай бұрын

    Yeah. As of 08/22/2023 the price of the Leatherman Raptor is $99.00 Plus Your States Sales tax. Still worth it, as these shears are top notch. They will do what they are designed to do. I would recommend them to anyone serious about Trauma Shears.

  • @erwinabelmann
    @erwinabelmann3 жыл бұрын

    Usyng the sog with handgloves?

  • @xrazx1269
    @xrazx1269 Жыл бұрын

    tajam bersinar

  • @mattatat1138
    @mattatat11383 жыл бұрын

    Former LEO and EMT here, and I can't imagine spending a ton of money on something that you're primarily gonna use in a confusing, hectic rapidly evolving situation where you're likely to lose them, or have them covered in someone else's bodily fluids... I carried the inexpensive

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I hear opinions both ways from first responders.

  • @sdecarlo

    @sdecarlo

    3 жыл бұрын

    I see your point but I am careful to keep track of my equipment. I never really lost one but I have had people try to appropriate them in a hospital er...

  • @mac001texas

    @mac001texas

    2 жыл бұрын

    @@txtoolcrib I am a paramedic and will never use the garbage $5 shears. I have both the xshear and raptor but i mainly carry the raptor on my person because the pocket carry ability with the clip is really compact and low profile. The cheap shears have failed too many times and hurt your fingers too because of how badly they cut, you have to squeeze excessively hard. I don't have time to trifle with POS shears and worry about whether I'm going to have to find a second pair of shears in the heat of treatment because the garbage pair wouldn't cut. If you have a nice pair of shears, you shouldn't lose them. You put it back where it came from after you use it, you don't just set them down or hand them to people without making sure you get it back immediately after they're done.

  • @wesleemiller
    @wesleemiller3 жыл бұрын

    Sweet.

  • @chillios2222
    @chillios22222 жыл бұрын

    you can carry a spring loaded window breaker they are very slim, like a pen

  • @JBGecko13yt
    @JBGecko13yt Жыл бұрын

    The leatherman is right handed and the SOG appears to be ambidextrous!

  • @meter2836
    @meter28363 жыл бұрын

    The price on the raptors has sky rocketed , it was $64 when it cam out now it’s closer to $100

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Yeah, it's jumped up quite a bit.

  • @tmapes1989

    @tmapes1989

    3 жыл бұрын

    Got mine for $59 on ebay a year ago

  • @skyemac8

    @skyemac8

    2 жыл бұрын

    Rip off, just like most leatherman junk.

  • @Genesislights
    @Genesislights3 жыл бұрын

    Does the SOG actually easier to cut compared to Raptor (due to the compound leverage on SOG).

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    You would think so, and I thought it would, but I didn’t feel any discernible difference.

  • @Genesislights

    @Genesislights

    3 жыл бұрын

    TX Tool Crib thanks. Also, due to the compound leverage, don’t you need to open the handle more (on SOG) to get the shears blade open at the same opening as ones in Raptor?

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    @@Genesislights not this time, because the pivot for the blades is not at the same location as the pivot point for the compound leverage gears. So it opens up fairly quickly, which is why I believe you lose the benefit of the compound leverage to begin with.

  • @Genesislights

    @Genesislights

    3 жыл бұрын

    @@txtoolcrib Thanks for the review. You've done a great job comparing the two.

  • @wesleemiller
    @wesleemiller3 жыл бұрын

    I like the raptor sheers better.

  • @lipinguino8741
    @lipinguino87413 жыл бұрын

    Good test👌

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Thank you.

  • @JustinHuman1269
    @JustinHuman126911 ай бұрын

    Some employers might not allow the SOG because it has blades other than the shear, itself. I've worked in a few hospitals that would fire you for it.

  • @wesleemiller
    @wesleemiller3 жыл бұрын

    Cool.

  • @ogstv8778
    @ogstv87782 жыл бұрын

    The leatherman does he also cut stainless ring?

  • @txtoolcrib

    @txtoolcrib

    2 жыл бұрын

    No, only soft metals.

  • @MattLitkeRacing
    @MattLitkeRacing3 жыл бұрын

    Can you cut wire with the ring cutter?

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Easily

  • @macgyverbryan1377

    @macgyverbryan1377

    3 жыл бұрын

    Note gold and silver rings only. Also copper wire, hard wire damages it.

  • @zac08
    @zac083 жыл бұрын

    kzread.info/dash/bejne/nZqcrK2xn9LaaNI.html The video where it shows the ineffectiveness of the glass break on the SOG.... when it comes to such tool, it's never meant to move or it will just close on itself like what was shown on the video.

  • @macgyverbryan1377
    @macgyverbryan13773 жыл бұрын

    Warranty wins with Leatherman. NQA make it right. The look at parasheers was interesting though.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    That’s a good point, Leatherman warranties are hard to beat.

  • @aaronc9247
    @aaronc9247 Жыл бұрын

    I like the parashears. As a firefighter/EMT I like how there’s a O2 key. I’ll always have a key and never have to find one. It’s perfect for what I need and use it. Personally I don’t believe there’s a best. There’s good for what you need it for. Good review

  • @karen-kayelazarski8658

    @karen-kayelazarski8658

    Жыл бұрын

    Thers a 02 opener on the raptor too

  • @weston407

    @weston407

    Жыл бұрын

    go to medic school and I promise you you'll use the shears way more often and yeah, the Raptor has a O2 key as well, integrated with the seatbelt cutter

  • @bryanpichardo6251
    @bryanpichardo62513 жыл бұрын

    My coworker is a SOG diehard, when he saw my Raptors he drooled over them, shortly thereafter the Paras came out and I told him about it and even HE considered them less that the Raptors.

  • @macgyverbryan1377

    @macgyverbryan1377

    3 жыл бұрын

    Howdy do other Bryan with a Y.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I tend to agree.

  • @iamfuckingyourwaifuandther2743
    @iamfuckingyourwaifuandther27433 жыл бұрын

    If you are going to have a battle of the shears, you have to include the xshears too.

  • @tawmifm

    @tawmifm

    3 жыл бұрын

    The Xshears aren't multi tools though. They're not a fair comparison

  • @iamfuckingyourwaifuandther2743

    @iamfuckingyourwaifuandther2743

    3 жыл бұрын

    ​@@tawmifm They are half the weight of the multitools, and you have an extra 2-3oz to work with for adding more tools, while having better ergonomics, they work way better than the sog ones, and on par with the leatherman ones. On top of the the only difference in tools between the xshears, and the leatherman is a ring cutter, oxygen wrench, zip cutter, and a glass breaker. Leatherman sells a tool that has a zip cutter with replaceable blades, oxygen wrench, and I believe a glass breaker that weighs 1oz already. You'll probably never use the glass breaker on any because if you need to break glass you will probably want/have a specialized tool for that. The only useful thing you would be missing is the ring cutter, which probably has a specialized tool for that in the field, but for edc it has no real practical use. If you want to make the xshear into a multitool, I've also seen attachments that go onto the handle of your shears that include the zip cutter, and oxygen wrench. My opinion is that the xshears are better than the raptors because there are no hotspots when using them, however from my tests the leatherman ones seemed to cut a teeny tiny bit better, but the advantage of ergonomics, being easier to clean, and weight far out weighs the cool factor, and being better at cutting by a miniscule amount. If I weren't me, I could also add in that the xshears are less than half the price of the raptors, but I own both mainly because the raptors are too cool not to collect.

  • @waldo-ot6ul

    @waldo-ot6ul

    2 жыл бұрын

    Why would you buy something than buy the attacments later when you have something that is an all in one already? Unless maybe you only wanted the one of the attachments and not all of them. As for window breaker why would you need a special one of the one on the tool works which I assume does. This saves time weight and having more items on you and that is reason having attachments on an item and cost in the long run. Also the leather fold up and have a pouch which you can carry easier. Is this good for everyday use of course not but is a very nice feature to have if tight on space. If you are just using it for just the sheer value I can see valid point of paying less and just marginally less better but money should not be an issue if it saves time and it serves the need of what you are looking for. The weight can be a factor but that will happen because of the extra accessories on it. It teally depends on what reason one or the other.

  • @gerardoeliasmartinez5860
    @gerardoeliasmartinez58602 жыл бұрын

    I used the Raptors on my years of fire service and I loved them. Things pretty much cut through anything i had to get through. Jeans, leather boots, thick jackets and so on. After a while though i did notice they sort of dulled out a little so they’re just sitting in a drawer. But i would still recommend that tool to ANYONE wether its for Duty or EDC. Well worth it

  • @markescartin6613

    @markescartin6613

    2 жыл бұрын

    Pull those shears, box them and send that tool back to Leatherman; Your throwing away money by not getting a factory-fix!

  • @stevendavis1243
    @stevendavis12432 жыл бұрын

    Leatherman Raptor rusts with continued use. Can anyone tell me if the SOG parashears rusts with use.

  • @nitric75
    @nitric753 жыл бұрын

    nice review

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Thank you.

  • @nitric75

    @nitric75

    3 жыл бұрын

    @@txtoolcrib just ordered a raptor with red handle. lol

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I think you’re going to like it. Let me know once you’ve had a chance to use it.

  • @nitric75

    @nitric75

    3 жыл бұрын

    @@txtoolcrib will do. i just bought a new xe6 (discountinued) but managed to get my hands on one. Its like a larger version of the ES4 / PS4

  • @attranssion
    @attranssion2 жыл бұрын

    can they cut toliet tissues?

  • @michaeledlin9995
    @michaeledlin99953 жыл бұрын

    The Leatherman is a winner any day. The SOG is a lighter weight tool and has gimmicky features.

  • @SnareMan
    @SnareMan8 ай бұрын

    No pocket clip on the paraschears are a deal breaker.

  • @TommiHonkonen
    @TommiHonkonen11 ай бұрын

    sog seems like cool kids would like it more because it looks fancy but i am not cool or kid and i understand fancy look isnt for me so i know what i am going to buy

  • @knifetrain3118
    @knifetrain31183 жыл бұрын

    The Raptor hands down.

  • @deltonwestberry6405
    @deltonwestberry6405Ай бұрын

    Do the X shears

  • @erwinabelmann
    @erwinabelmann3 жыл бұрын

    You forget the leatherman lifetime garantee

  • @clineoseverianodasilva4661
    @clineoseverianodasilva46613 жыл бұрын

    vídeo muito bom

  • @michaelcariello6233
    @michaelcariello62333 жыл бұрын

    Raptor for me. Love that tool

  • @piotrmarczak3733
    @piotrmarczak37333 жыл бұрын

    The so called rope or seat belt cutter is completely useless tool for any multitool. I could only see little use for anglers and only when it is always accessible ie outside. Your very good presentation showed it clearly. It is much easier to cut the seat belt or rope with shears or serrated blade like on Victorinox RescueTool.

  • @rileycoyote4924

    @rileycoyote4924

    Жыл бұрын

    They cut rolled gauze very well, same thing with Paracord. And yeah, it's kinda dumb to have it on a layperson's multi-tool, but it doesn't have a risk of accidentally cutting the patient like a serrated blade.

  • @gregn3gds172
    @gregn3gds1723 жыл бұрын

    Pretty good video. However, for a "fair" comparison, you should have used the new Raptor shears instead of your old ones. I fully understand the reason for not doing that. But anything that the SOG "won" on, it could be that the SOG is better, or it could be that the Raptor needed sharpened. As for the out of place tools on the SOG, I think they did that for marketing reasons. It doesn't matter that they are not very useful for this sort of tool, it allows them to call say the SOG has 11 tools.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    That’s a good point, but I did intentionally. I was pretty sure the Leatherman was going to outclass the SOG from the get go. I may redo this later with the new version.

  • @shorty7943

    @shorty7943

    2 жыл бұрын

    What is the difference between the old and new Raptor shears?

  • @robertichishita3281
    @robertichishita32813 жыл бұрын

    Manufacturers of Leatherman Raptor and SOG Parascessers should donate their items for review to the ocean-conservation-namibia. What better way to test both scissors under salt water, sand conditions while cutting off different sizes of fishing lines entangled on the seal while holding down a scared, angry wild seal. So far I have seen them only Leatherman Raptor type used to the the fishing lines. This is an actual field test.

  • @GinEric84

    @GinEric84

    2 жыл бұрын

    Well they aren't designed for that and will rust immediately

  • @michaelthompson7570
    @michaelthompson75702 жыл бұрын

    Seen nuff! Leatherman for the win!

  • @theomnipresent1
    @theomnipresent13 жыл бұрын

    SOG making a cheaper knock off but charging more? They should take those useless extra "features" off and undercut Leatherman's price significantly.

  • @rathernot6509
    @rathernot65092 жыл бұрын

    I learned the hard way you don't use either of these for cutting cardboard; you use the Skeletool instead, which so far has not let me down yet, especially with its Bit Kit which only adds functionality. I used to work in a restaurant and would regularly use my Raptor for cutting open cardboard boxes, well over time that caused problems with both the screw and somehow part of the handle too. MAYBE I got a lemon (that does happen) but when Leatherman themselves acknowledges at least one design flaw and then OMITS FEATURES from their "redesign", that's a problem.

  • @LawAbidingCitizen117

    @LawAbidingCitizen117

    Жыл бұрын

    You need aviation snip to cut cut cardboard.

  • @Michaelluo712
    @Michaelluo7122 жыл бұрын

    Try cutting through coins with the SOG. I know Leatherman can split a quarter clean in two with enough strength.

  • @kingfisher46
    @kingfisher463 жыл бұрын

    U forgot to mention that it has a ring cutter

  • @name5949
    @name59493 жыл бұрын

    Victorinox all the way icanc Swiss made work of art👌

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Would be nice if they made one in this style.

  • @mackjones7688

    @mackjones7688

    3 жыл бұрын

    To me, this is a no brainer. Common sense to me since Victorinox's blend of stainless is so corrosion resistant. I see no excuse for Victorinox not making a full size set of scissors or trauma sheers. With the way people go nuts over mirror polish officer Swiss steel. I can't imagine why this product wouldn't be graciously received by consumers. I bet Diezelle57 and Ben would be first in line to get ahold of a Raptor style Victorinox. Even if it was a Fiskar sewing sheer type of scissor from Victorinox. I could definitely see Ben Jonesing to get a set for himself. 😆

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    For sure!

  • @filamer5883
    @filamer58833 жыл бұрын

    comfort doesn't really matter because it takes less than a minute to cut the cloth. it you're cutting the clothes of 5-6-10 people then comfort is important

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Fair point.

  • @zac08
    @zac083 жыл бұрын

    SOG in the open position inside the case still exposes the blade... Kinda no point to carry it tat way when you are likely to soil, or knock it on yourself or someone else in that exposed manner.

  • @maxneyasit8130
    @maxneyasit81303 жыл бұрын

    Резак Raptor больше подходит для резки стропы, нежели резак SOG. Скругленный профиль может загибать край стропы. Спасибо за сравнение

  • @rockstarfan886
    @rockstarfan8863 жыл бұрын

    Sog screwed me over I will never buy another one of there products ever again their dead to me

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Goodness, what happened?

  • @macgyverbryan1377

    @macgyverbryan1377

    3 жыл бұрын

    I too will not have their products. Long story short CS let me down on a simple warranty. Leatherman just makes it right, every time.

  • @rockstarfan886

    @rockstarfan886

    3 жыл бұрын

    Almost the same as macgyver bryan I bought a knife from them last year and not even 20 min into owning it the pocket clip turned into the handle of the knife destroyed the pocket clip slot by deforming the g10 scales or whatever it was made of and snapped the clip. Long story short most of there knives ive found only have a single screw holding the pocket clip on which causes a pivot point. Ive never seen this on "quality" knives I own crkt buck kershaw and they all use 2 screws to hold there clips on. Sog denied any warranty or replacement or guarantee it wouldn't happen again

  • @macgyverbryan1377

    @macgyverbryan1377

    3 жыл бұрын

    @@rockstarfan886 I had an issue with a tool on a MT. I asked just to replace only that tool, they said it had to be purchased. Used to Leatherman NQA warranty. They begrudgingly sent it after almost pleading. It was traded for something. Almost too bad it was was fun flipping it. The Free P4 is just as fun.

  • @rockstarfan886

    @rockstarfan886

    3 жыл бұрын

    @@txtoolcrib Check out oneshear.com there affordable with no gimmicks and super sharp I bought a pair a few weeks ago for my myfak

  • @HDSME
    @HDSME2 жыл бұрын

    Leatherman blows it away!

  • @PersonaN007Grata
    @PersonaN007Grata3 жыл бұрын

    Am I the only one that cant invest a lot in shears because they just tend to grow legs and walk away?

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    I bought the Leatherman Raptor the week they hit the market. Had it sitting in the side pocket of my drivers door on my truck. I took my truck in to get an alignment. When I got my truck back I noticed that they were gone. I about had a come apart with the manager. After about a 20 minute rant, the mechanic magically found them on the ground. Apparently, they had “fallen” out of the truck door when he got in it. Uh huh 🤔!

  • @PersonaN007Grata

    @PersonaN007Grata

    3 жыл бұрын

    @@txtoolcrib I have a Console Vault in two of my vehicles. Have had a few things stolen out of my truck before. A valet attendant stole my brand new digital camera once. And have been broken into a couple of times. So now, anything valuable goes in there, especially when it’s not parked at work or at home.

  • @williammalesic9034
    @williammalesic9034 Жыл бұрын

    When you cut the rope that was thick the red rope when you use the sog you were cutting the Rope towards the far end of the blades. When you use the Raptor you cut nearer to the pivot of the two blades which is always going to cut better than if you go farther out near the end of the blades. I think that was very biased I'm not sure what to think. You seem to already have your mind made up that raptor is going to be better than a sog

  • @ajbeau3920

    @ajbeau3920

    9 ай бұрын

    Thats probably because it is... Just sayin"

  • @MrBhart2408
    @MrBhart24082 жыл бұрын

    Leatherman? SOG? From my experience with multi tools I’m going with Leatherman.

  • @mehdimd.3692
    @mehdimd.36923 жыл бұрын

    Just leatherman raptor 💪💪💪💪💪💪💪👌👍

  • @skyemac8
    @skyemac82 жыл бұрын

    Get yourself some Knipex pliers edc. Scissors for wire cutting?! The right tool for the job. Wonders why they’re dull …

  • @txtoolcrib

    @txtoolcrib

    2 жыл бұрын

    I have plenty of Knipex products. I also don’t generally use the Raptor for cutting wire, which it can handle with ease by the way. Finally, mine are slightly dull because I use them.

  • @kevola5739
    @kevola57393 жыл бұрын

    This test would have been interesting while wearing the thin nitrile gloves that most medics wear and compare the damage to the gloves after testing. It seems like the locking mechanisms of the SOG would destroy the gloves easily. The ability to clean the tool as well as the sheath on the Leatherman would be a major plus from a medical use point of view. The addition of a bottle opener to every multitool seems like pure insanity to me. If I had a multi purpose tool with no bottle opener I can guarantee you I could open a bottle using one of the other tools.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    You’re right, that would have been an excellent test. Wish I had thought about that.

  • @Northanteus

    @Northanteus

    3 жыл бұрын

    @@txtoolcrib You can always try a Part 2 competition with gloves on video? 😁

  • @chriss3886
    @chriss3886 Жыл бұрын

    Know this is a year late... from my experience in USR, the raptors are better at the heavier materials: boot leather, laces, upolstery, and different cordage.

  • @DvdNar
    @DvdNar9 ай бұрын

    Only Raptor. all the others don't come even close.

  • @leecherlarry
    @leecherlarry2 жыл бұрын

    Namibia Ocean Team drops the shears constantly in sand . Sand in the SOG mechanics , what a horrible

  • @jamesbornman5556
    @jamesbornman55562 жыл бұрын

    Buy the American made Leatherman!

  • @jamesbornman5556

    @jamesbornman5556

    2 жыл бұрын

    If you don’t your a fu@king commie scum bag

  • @colinmartin9797
    @colinmartin97973 жыл бұрын

    I've been using a raptor as a medic for about 7 years I fucking hate it. For starters, the ergos on the raptor are utter dogshit. Trying to get through a motorcycle rider's full suit with them is absolute agony. Hotspots everywhere. I can hand on heart say they're the most uncomfortable penny cutters I have ever used. Second, they don't keep an edge very well. They also have a really weak pivot that eventually works enough play into the blade that it doesn't close no matter what, and the torx fasteners might as well be rivets. The thick ass blade makes them very not maneuverable in the material you're cutting, particularly motorcycle leathers through CE padding. Leatherman won't even fucking sharpen them anymore. You can't even PAY them to sharpen them, and sharpening the teeth is a bitch, requires some tiny needle files and a vise. The other issue is that they are nightmares to clean. So many moving parts, everything gets nasty and you better start your shift by autoclaving the thing. The o2 wrench works, but not always great - isolette under-mount o2 tanks are NOT easy for it, but it can do the job. I don't know why anyone would use the glass breaker. I've used it in testing on a wrecker car and it HURT. Even with bunker gloves. Get a keychain size spring loaded punch or a carbide metal punch. The ring cutter is worthless, I chowdered it immediately trying to cut mild steel wire (we have better ring cutter saws in the kit but I am a magician with dental floss anyways) and the seatbelt ripper is just a derp stupid tool when the scissors do the job. The ONE and only thing I say it does well is the carry system, the open/closed carry and adjustable belt clip are great. The pocket clip is too stiff to use regularly, and you don't want to out a dirty set of penny cutters in your pocket anyways. They also don't seem to be very corrosion resistant. I have cheap stamped cutters that didn't rust half as fast as these did. I keep them because they sorta still work on the first 2/3 of the blade (the rest doesn't bite anymore since the pivot is worn out, which happened within the first year) and the o2 wrench, plus the nice belt carry. But I hate them and would NEVER recommend anyone pay money for them. It pisses me off because they have kind of soured me on the Leatherman brand. Leatherman doesn't support them for shit and in YEARS since making them, they haven't addressed any of the design flaws, yet they keep selling them. I'm very interested in the SOG to be honest. The Leatherman is such a low bar to clear, I can't see how they could ever be worse.

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    This begs the question. If you hate them so much, why have you carried them for seven years? I have products that I have purchased which I ended up not liking. Either I would sell them or stop using them altogether.

  • @colinmartin9797

    @colinmartin9797

    3 жыл бұрын

    @@txtoolcrib they were a gift from a partner, so I couldn't just get rid of them, and for the first couple years, Leatherman WOULD sharpen them, so even though they dulled fast, I could get the toothed edge freshened up. They still sort of work, so because of the phenomenal belt clip, I will pull them out for less critical work that I can suffer them chewing on, and they still work as an oxygen wrench. And I don't sell or give away things to people that I know are junk. The raptor is junk and Leatherman doesn't support it or it's users for a damn. Which is frustrating, because that belt carry is absolute genius and there's serious potential. As it is, your awesome overviews on so many multitools has convinced me to buy the SOG shears and their mini multi tool - SOG gives first responders 50% off, and the lifetime warranty is peace of mind. What woukd be absolutely killer, would be one of these shears to have replaceable blades. I'd love that. I'm curious if you've ordered a Toler tools union? I have one on the way eventually. Also wanted to thank you for your review on the roxon storm s801s. That little beast might be the most powerful "everyday" multi tool I've ever used. It goes on my belt next to the raptors, and once my powerpint waivers, will be retired to my car's emergency kit. That compound lever on the corkscrew is genius, giving a true waiter's friend. I wish corkscrews on multi tools were more common. I drink a lot of wine on vacation!

  • @nicholasmapes

    @nicholasmapes

    2 жыл бұрын

    The SOG are more comfortable be far, however... I find that the blades on the sheer bend under extreme stress, and the blades move apart, this means it takes a lot longer to get through tough materials. I primarily use my sheers for utility purposes, not first aid, so the leatherman works better for me. It's a shame LM isn't backing these as good as they used to... LM used to be a great company but I fear they are following the pack when it comes to customer service. Also, 420 HC and 440HC just don't cut it anymore (get it) LM needs to update their steel if they want to keep charging premium prices...

  • @deltonwestberry6405
    @deltonwestberry6405Ай бұрын

    Really? I am a Paramedic !!!’I broke plenty of windows with My SOGs.!!!!!!!!!!!! Plus you don’t want to put bloody shears in your pockets.

  • @ajayrajbanshi7434
    @ajayrajbanshi74343 жыл бұрын

    why i think you praising sog parashears so much

  • @txtoolcrib

    @txtoolcrib

    3 жыл бұрын

    Credit where credit is due, the ergonomics are better on the SOG.

  • @wintersoldier0
    @wintersoldier010 ай бұрын

    clearly Leatherman isnt as good on nylon

  • @GinEric84
    @GinEric842 жыл бұрын

    It is my experience that pretty much without exception everything made by SOG is a total piece of garbage, I look forward to seeing what this review says

  • @BMH1965
    @BMH19659 ай бұрын

    You compared old against new...not good. Not subscribing to channel.

  • @nanabooboo1411
    @nanabooboo14116 ай бұрын

    I guess if you are an electrician, good review. EMS review horrible, use clothes, a belt , leather shoes , seat belt, go to a junk yard .