I love the quality of Russian craftsmen. Great video 💪

@NovgorodskyLeatherCraft

3 жыл бұрын

Thanks for your opinion of my humble skills

Beautiful job! Thanks for sharing

It has been the most useful video I've watched on this subject. Congratulations. I applaud you. 👏

It was a joy to watch your video as I have watched others that go so fast I couldn’t understand the methods. Thank you so much for sharing, I have a much better idea of how to go about making a watch strap now. Love your work ❤️ x

@NovgorodskyLeatherCraft

3 жыл бұрын

You are welcome. Glad that the video was useful to you

Um belo trabalho mostrando todos os detalhes desde a esolha do material até o acabamento final. 👍👋👋👋

Отличный мастер класс!

Love the color!!!!

@NovgorodskyLeatherCraft

2 жыл бұрын

Yes, it's beautiful. But I like tobacco better

Отличный познавательный и очень информативный ролик. Не каждый сможет так же хорошо объяснить словами, как автор поясняет на пальцах.

@NovgorodskyLeatherCraft

2 жыл бұрын

Пальцами всегда проще, чем словами :)

I miei complimenti ! lavoro impeccabile !

@NovgorodskyLeatherCraft

2 жыл бұрын

Grazie!

Thank s

Very good my friend کارت بسیار خوب بود دوست من👍🏻👍🏻👌🏻👌🏻

@NovgorodskyLeatherCraft

3 жыл бұрын

glad it was helpful to you

Very nice work. Subscribed.

hello: After watching more than a hundred videos on watch strap making, I had not seen any as good as this one of yours. Congratulations! I don't speak English and I don't know if you have already been asked in any of the comments where I can buy the acrylic template that you use for this strap. Thank you.

@NovgorodskyLeatherCraft

Жыл бұрын

Buenos días. Thanks for the feedback. Unfortunately, it is currently not possible to order this templates. They are produced in Russia and there is no way to accept payment from abroad.

@pedrodelatorrevique1459

Жыл бұрын

@@NovgorodskyLeatherCraft muchas gracias por su rápida respuesta. Una pena que no se puedan comprar fuera de Rusia. Saludos.

Excellent 👌

@NovgorodskyLeatherCraft

2 жыл бұрын

Thanks

You deserve more like

@NovgorodskyLeatherCraft

2 жыл бұрын

thanks a lot

Круто

Excellent detailed tutorial…thank you very much 👍🏻👌🏻

@NovgorodskyLeatherCraft

Жыл бұрын

Thanks for the feedback. I glad it was helpful for you.

Excellent video, very instructive. 💪 Respect. You just didn't say how wide the inner part of the bracelet is.

@NovgorodskyLeatherCraft

Жыл бұрын

Glad you found it useful. I use ready-made templates, so I didn’t even think about this issue. The inside is narrower than the outside by 4mm on each side. That is, with a strap width of 18mm, the middle part has a width of 10mm

@saleradovic878

Жыл бұрын

@@NovgorodskyLeatherCraft Thanks a lot

@kevinorr6880

Жыл бұрын

@@NovgorodskyLeatherCraftWhere did you get the acrylic template that you were using? Thank you for the video. Well done.

@NovgorodskyLeatherCraft

Жыл бұрын

@@kevinorr6880 Contact manufacturer via WhatsApp +79054314559 or Instagram @sdelay_koshelek

thank you for the great tutorial boss! how many stitches per inch are your irons? or what do you recommend as far as pricking irons for watch straps? thank you again!

@NovgorodskyLeatherCraft

3 жыл бұрын

I use French style pricking irons with 3mm pitch. Also, pricking irons with 2.7 mm pitch can be used

Love this video. It has inspired me to make a watch strap for my old Omega. Could you tell me where to find the stitching punches you use please. Thanks

@NovgorodskyLeatherCraft

3 жыл бұрын

Such as my can buy only in an russian online store. Any more stores solds it the low quality with burrs on inner side of tooth that tear the leather. My punches have a polished inner side of the tooth. groomix.ru/image/cache/catalog/Tools/Proboyniki/ProbKosPol-3-650x650-product_popup.jpg In the photo above is what is sold everywhere, below like my. I recommend the high quality punches from Wuta www.ebay.com/itm/152938982720

@joseperezgonzalez7092

3 жыл бұрын

the video is incredibly good ,thanks for sharing...👍🏻

@NovgorodskyLeatherCraft

3 жыл бұрын

@@joseperezgonzalez7092 you are welcome!

Hi. Great video. I saw on aliexpress that kind of edge creaser, and i am thinking about buying one. What is your experience with it? Is it good? And perhaps a link to where you bought yours. Thank you.

@NovgorodskyLeatherCraft

3 жыл бұрын

I like it. I am satisfied with the purchase. Controller purchased here aliexpress.ru/item/1005001514812697.html But nozzles ordered in another product item aliexpress.ru/item/4000961039287.html It turned out to be cheaper

Fantastic workmanship. can you tell me where you got the template from? I have ordered a few from amazon; however, yours look better!

@NovgorodskyLeatherCraft

2 жыл бұрын

Thanks. I buy temlates from my friends. Their shop on Etsy www.etsy.com/listing/704210133/

OK !

@NovgorodskyLeatherCraft

2 жыл бұрын

Thanks

I want to get into making my own straps. Takes way too long waiting for someone else to make them and they always come out wrong it seems. Where would i find those plastic templates and the tools? What kind of material do you use for your inserts? I'd REALLY love some help with this. Please and thank you

@maplehedgehog789

2 жыл бұрын

I wish you had a list of materials needed so i could try this. I have no idea what kind of thread to buy or leather to get. What kind of glue or anything. Please, help a brother out. My therapist says i need to put myself into something creative or i'll relapse

@NovgorodskyLeatherCraft

2 жыл бұрын

You can use any 1mm vegetable tanned leather. The tools are all listed in the video before using it, or see my last video kzread.info/dash/bejne/aZyMzpKSe5u0oto.html, I show it on begeen At least you need a utility knife, a stitching chisel, any rubber hammer and good glue, such as Fiebing's Leathercraft Cement For best result, you can add wooden slicker, edge beveler and, maybe, edge kreaser Templates can be bought here www.etsy.com/listing/704229303/

Great result! Where are you getting the metal parts?

@NovgorodskyLeatherCraft

2 жыл бұрын

Thanks. I get buckles and springbars on AliExress

Una pregunta.....dónde encontraste las plantillas?

@NovgorodskyLeatherCraft

Жыл бұрын

Estos plantillas están hechos por un amigo mío vk.ru/market-127018002?section=album_30 Desafortunadamente, en este momento hay problemas para vender en el extranjero en Rusia (solo se puede pagar con criptomonedas). Puedes contactarlo info@1-km.ru

Hi there! What kind of leather was the third one? The first two you named in English, but I do not reay cyrill so could you please specify that as well? By the way, excellent video, will make my strap based on this video, thank you very much for it :-)

@NovgorodskyLeatherCraft

3 жыл бұрын

bottom layer is Walpier Buttero

@NovgorodskyLeatherCraft

3 жыл бұрын

bottom layer is Walpier Buttero

Nice! What brand of contact cement is this?

@NovgorodskyLeatherCraft

3 жыл бұрын

Kenda Farben Ecosar 116

👏👏👏👏👏💕💕💕💕🤗🤗🤗🤗

Hey sir, where do you buy the leather? I am intrested for a shop in europa. Thx. Btw nice work!

@NovgorodskyLeatherCraft

3 жыл бұрын

Hi. Thank you for your feedback. I buy from local stores. You can order here www.rmleathersupply.com/ and here www.tatraleather.com/shop

Hi I may have missed it but didn’t see how thick the inlay leather is ? Or is it the same as the outer layer 1

@NovgorodskyLeatherCraft

10 ай бұрын

Hi. Shown at 2:50 For insertion I use softer leather, about 1mm thick

Hey, I’m curious. With the holes for watch band & length. How do you know how long you need for wrists? Like if your watchband maybe fits 7 inch wrists. You extend it to make 8.5 inch wrist. This would be by just adding 2 inches to the length? & adding more holes?

@NovgorodskyLeatherCraft

3 жыл бұрын

The video starts by showing you how to calculate the strap length. No extra holes need to be made. If you count everything correctly, then only three holes are enough. I do five, simply because it looks nicer that way. If your wrist is 8.5 inches (216 mm), subtract the length of the watch (~ 44mm) from this value and divide it in half. This will be the length of the 12 o'clock side strap (86mm). The length of 6 o'clock side strap will be 86 + 45 = 131mm Punch the central hole at a distance of 86 mm from the watch and two more hole at a distance of 7-8 mm from it, one above, the other below.

@3AsianBoi

3 жыл бұрын

@@NovgorodskyLeatherCraft appreciate it! Will study the video more :)

Great video! Can you share where you buy the template?

@NovgorodskyLeatherCraft

2 жыл бұрын

I buy it's from this seller www.etsy.com/listing/704210133/

@rastaricky9584

2 жыл бұрын

@@NovgorodskyLeatherCraft Thank you 🙏🏾

Hi awhile back you asked OKBRIDGE about your sewing machine not running correct, it was going forward when you had it in reverse and going backward when you had the lever in forward stitch. I am having same problem ,did you get it fixed and if you did what was wrong?

@NovgorodskyLeatherCraft

2 жыл бұрын

Hi. You confused me with someone else. I don't use a sewing machine. All my products are sewn by hand saddle stitch

Newbie question...what thickness of leather are you using?

@NovgorodskyLeatherCraft

3 жыл бұрын

the video contains the answer to this question 2:46

Nice! Where can i get that template?

@NovgorodskyLeatherCraft

Жыл бұрын

Contact manufacturer via WhatsApp +79054314559

А как называется инструмент, которым вы шпильки двигаете? Ложечка или что это 😂 мне такой тоже надо

@NovgorodskyLeatherCraft

Жыл бұрын

Не поверите :) Шпилькосъемник :)

@duckjrleathergoods3054

Жыл бұрын

@@NovgorodskyLeatherCraft 😂😂😂 спасибо 🙏

hello friend great master class but.. please can you make a version when you're talking and explaining while working. also recommend some tools and leather types and sources. pepole will be willing to pay fir that kind of master class for beginners. russian or english preferable i would be interested. I've seen some udemy courses but i don't want them for now, as I'm more focused on watch straps.

@NovgorodskyLeatherCraft

3 жыл бұрын

Thanks for the comment. Perhaps I will make a video with talking while working closer to autumn. I need to prepare well for make this a video. Now I'm just making the video process of working on an order.

@danielhovet5675

3 жыл бұрын

@@NovgorodskyLeatherCraft great work. I'm following your channel, so it will be cool. also i will try to start as is with this video. but as i don't have no tools or leather to start with.. i will try to understand the frist basic tools that i can get from AliExpress/ ebay then the leather that i will want to work with. I saw a strap of Stingray leather that i want to do for myself. I'm also interested to learn to make a leather nato. большое спасибо

@NovgorodskyLeatherCraft

3 жыл бұрын

@@danielhovet5675 did you mean the nato watch strap? good idea for future video

Great video, but talking through the process or playing some music would've made the video much better. The ambient noise for over an hour is a bit much. Thank you for posting though.

@NovgorodskyLeatherCraft

3 жыл бұрын

In previous videos, I was asked not to add music :) In general, this video is not intended to be viewed in one go. Looked at the one part, performed it. Looked at the next part, etc.

@ninobrn00

3 жыл бұрын

@@NovgorodskyLeatherCraft Can't please everyone :) Again, it's very helpful as I'm looking to make an open ended strap for a cushion case.

Where can I buy the templates?

@NovgorodskyLeatherCraft

2 жыл бұрын

www.etsy.com/listing/704210133/professional-double-layer-templates

Hello. I'm just wondering, why are two different leathers always used on watch bands? Why can't the same leather be used in two layers?

@NovgorodskyLeatherCraft

4 ай бұрын

I don't always use different ones. It depends on what kind of leather is used for the face. For example, the shown in this video can also be used on the bottom of the strap. But still, for the bottom it is better to use leather that has good protection from moisture (sweat).

@EmreM.

4 ай бұрын

@@NovgorodskyLeatherCraft thank you for the answer :). By the way, i haveond more question. 😂 Which leather type is more resistant for moisture?

@NovgorodskyLeatherCraft

4 ай бұрын

@@EmreM. My favorite is Conceria Walpier art. Buttero. This leather is impregnated with wax and passed through hot rollers. This procedure nice protects leather from sweat

@EmreM.

4 ай бұрын

@@NovgorodskyLeatherCraft thank you so much😊

okkkk

However, can you tell me which company distributes them in Russia? I have a Spanish friend who has a company in Spain that sells Russian watches (it's called Amphibia Force) and imports two or three large packages from there to Barcelona every month. maybe he could buy it. Thank you.

@NovgorodskyLeatherCraft

Жыл бұрын

Of course, vk.com/market-127018002?section=album_30

@pedrodelatorrevique1459

Жыл бұрын

Muchas gracias !

Plees take mi

@NovgorodskyLeatherCraft

3 жыл бұрын

did not understand your request. make one for you?

Заточите нож. Больно смотреть как вы им шерфуете.

@NovgorodskyLeatherCraft

3 жыл бұрын

не поможет. 600-1500-3000-ГОИ перед каждой работой. на буттеро садиться моментально. заказал хороший из Японии.

@Arakelo

3 жыл бұрын

@@NovgorodskyLeatherCraft это было мое второе предложение. Правильно сделали что хороший заказали.

Колхоз

@NovgorodskyLeatherCraft

2 жыл бұрын

Ни кто и не спорит.