Thanks

@thelondoncraftsmanworkshop

Ай бұрын

Thank you very much for the super thanks, it really is appreciated 😊👍 Cheers ryan 🙂

Great video Ryan . I will build my workshop very soon and the spray booth will be inspired from your one . Greetings from Romania

@thelondoncraftsmanworkshop

Ай бұрын

Ahh hello! That's great! I'm glad its helping and give me a shout if you need more information on what to buy when you do 👍 Cheers ryan 👍

@valentinointeriors3023

Ай бұрын

@@thelondoncraftsmanworkshop Great, thank you 🙏

@thelondoncraftsmanworkshop

Ай бұрын

@valentinointeriors3023 No probs at all, enjoy your day 👍

fridays work for me...nice video it shows that you can get a LOT done in a short period and still get an excellent finish thanx rick

@thelondoncraftsmanworkshop

Ай бұрын

Hey Rick! Glad to hear that 😊 Yes, it's ridiculously quick and great finishes too, so a win win 👌

Thanks Ryan, this was a cracking video

@thelondoncraftsmanworkshop

Ай бұрын

Ahh cheers maty.... I'm trying to dona variation now. Next week is likely to be an under stairs shoe unit build 👍

Ryan thanks for the tips and demo.Well organised as usual. I’m just a hobbyist so it’s interesting to see how it’s done large scale. Can I ask when you did use rollers back in the old days 😂. Did you ever water down the Johnson’s a little or straight from the tin. I’m priming with leyland acrilic water based. Any tips to use when rolling with the last top coats. 👍

@thelondoncraftsmanworkshop

Ай бұрын

Hey! Thank you! Oh yes, I did the roller thing for a while, until I got sick of it... it took days to paint a whole wardrobe as components, hence going airless and never looked back 😊 I don't think I ever watered it down. I remember with my topcoats I used a 9 inch gloss roller (prodec). I applied the paint over the whole surface, then let the weight of the roller glide over the painted surface over and over until I had a flat finish or the best finish I could get. I also used a short pile 9 inch roller before that. It put it on heavier and I still got decent finishes. I j7st let the weight of the roller do it's thing again over and over until it was flat. 👍👍👍

Great new start time!!

@thelondoncraftsmanworkshop

Ай бұрын

Cheers mate! Let's hope it does well at this time 🤣

Do you normally fetch your components 1 by 1? Make it much quicker if carried several & stack up near sprayer.

@thelondoncraftsmanworkshop

Ай бұрын

Hi. To be honest, no. The wooden bench I put my brush on in the vid, I have 2 of those. I generally put them side by side next to my sprayer and stack materials there. I think Sean stacked them away as he knew I was filming and needed it clear in the booth area for filming 👍👍👍

great video, interesting Kieth - R&BB released an understairs storage this week, my son-inlaw built a pull out understairs unit - so you pulled out into the hallway and had shoes on - worked really well

@thelondoncraftsmanworkshop

Ай бұрын

Thank you, and sounds great! This one next week is just one giant drawer that pulls out completely. 👍👍👍😊

@etafws

Ай бұрын

@@thelondoncraftsmanworkshop cool, sounds similar to my son-in-laws look forward to see that one over the weekend

Thanks Ryan do my first spraying tomorrow 😮

@thelondoncraftsmanworkshop

Ай бұрын

Oh wow, how cool! You'll never go back to the roller once you start 😊👍

@Manxpm

Ай бұрын

@@thelondoncraftsmanworkshop thanks Ryan. I’ve made by debut, nervous as hell before I started, best thing to do is just get stuck in!! Your channel has taught me a lot. I also get the little walk whilst you’re spraying now!! Started off holding the gun to close to the board but holding back 250-300mm now giving a better finish. Keep the videos coming 👍👍 don’t forget when your over for the TT give me a shout

Good video

@thelondoncraftsmanworkshop

Ай бұрын

Amazing to hear thank you 😊👍

hi Ryan, do you have any recommendations for paint sprayers for someone who just does small jobs here and there but also wants a good finish. I'm looking to move from roller into spraying

@thelondoncraftsmanworkshop

Ай бұрын

Hi! Well the best basic machine if gojbg for graco is the gxff )with hopper) or gx21 (without hopper). I'd always go graco, wagner and other brands are mainly cheap plastic rubbish. Cheaper graco versions are mannky gimmicky and probably not what you want, so I'd say either of the above or the 390 pc if you want to spend a bit more. You can always buy used too 👍

I’m sure you said in another video that you just spray 2 coats of eggshell and don’t bother using a primer coat. I’ve tried the 2 top coat method and so far it’s worked a dream. When would I need to use a primer coat first?

@thelondoncraftsmanworkshop

Ай бұрын

Well technically you should use a primer. A primer is so the top coat/s sit nice and flat on the wood/mdf/ply, without sinking in etc. So by using the topcoat as a primer, basically you need to sand it until you think its as smooth as it can be, and without going back to the wood/mdf/ply etc. A real primer is designed to do this very well, but i manage to sand back the 'top coat/primer' (the first layer of top coat paint), really well, hence sticking to this system. It works for me :-) By the way, I am trialling new paints. This video is showing the paints from Amicus uk. If you want to try these, give Rob a call or email, and he will give you some advice on some waterbased 1K paints, which I have been finding to be absolutely amazing and rock solid. Just mention my name :-) Cheers Ryan

Brilliant video. Would you recommend the gxff for a hobbiest for spraying furniture or something else?

@thelondoncraftsmanworkshop

Ай бұрын

Thank you so much :-) Yes I would say it is... It has the hopper on it, and think most hobbiest/diyers like this as they can just pour in half a litre or a litre etc, rather than needing to buy a bigger 2.5L tin etc with the non-hoper style versions. The pump on it is smaller than say the 390, but itll still do a huge amount of work before the pump needs a service/changing etc. I have put a link here as an example of the next sprayer up in terms abilty, the 390. Also check out used machines, always bargains out there. amzn.to/3xWGCOb Cheers Ryan

@James-dv1df

Ай бұрын

@thelondoncraftsmanworkshop thanks for your help. Thinking of maybe grabbing one at some point as latex paint is not brilliant in hvlp. Would you consider the air assisted airless or do you think the results from airless with a fine tip is good enough?

hi ryan did i hear you where trialing 1 k paint ? question can you still use your airless system on 1k or you need an automotive set up for this also have you sprayed veneered mdf with a clear poly coating im planning on building cabinetry for a wine cellar that calls for american oak veneer but would like to give it a try myself cheers tom

@thelondoncraftsmanworkshop

6 күн бұрын

Hi Tom! Yes, I'm so happy with this new paint, it has transformed my finishes, I really do recommend trying it (there is a 5% discount code in the description if you do). Yes 100% it will go through an airless, and tbh it sprays much better than what I've originally been using and at only 1000 psi. I've not tried the clear coat, but Rob or Casper @Amicus uk do supply it so well worth calling them. Mention me and they will give discount if you do ☺️

Been watching your videos for some time now, good job! But, please tell me you know it's not pronounced John Stones🙈

@thelondoncraftsmanworkshop

Ай бұрын

Cheers mate :-) Well technically it is what you said, but without the space inbetween lol. Maybe it sounds like im saying it in 2 words in the film lol :-)

@danbriggs2008

Ай бұрын

Johnstuns.... Thank you for all your videos, have really helped me with my wardrobe build

If u don't mind can I ask u 1 question did ever use sayerlack new water base furniture paint

@thelondoncraftsmanworkshop

Ай бұрын

To be honest, no... but I've heard this paint is better. So far I'm super happy with the Vernites from Amicus UK, pretty amazing finishes I'm getting so far 👌👌👌👍

@yavuzhocaoglu8568

Ай бұрын

@@thelondoncraftsmanworkshop thx for answer I will deffo try because I like your fnjsh I get fed-up 2k paint be honest and I am following u which is u using paint coverage and fnish looks fine 1 more question the fnish when you touch its surface hard or feel like soft or plastic I am sure u understand what i am asking:)

@thelondoncraftsmanworkshop

Ай бұрын

Cool, well of you do buy this paint, ask to speak with Rob, and mention my name (Ryan). He may give you some discount if so 👍 Ahh the paint is rock solid. Totally hard. You won't be disappointed 👍

@yavuzhocaoglu8568

Ай бұрын

@@thelondoncraftsmanworkshop nice to meet you Ryan thx for all information deffinetly u will buy and try thx for all ur information

@thelondoncraftsmanworkshop

Ай бұрын

@yavuzhocaoglu8568 you are welcome 👍