Awesome job! this channel is extremely underrated. If you want to get faster, the next step would be improving your lookahead. Lookahead is where whilst you're solving a step or doing an algorithm, look around the cube to see what to do next so that there are no pauses in your solves. E.g. while you're solving your first f2l pair, try to find other potential pairs to do next. It's a very good habit to get into when you're just starting and I really wish I was given this information when i was just beginner. It will help you shave off a lot of time. Really great video as always :)

@KoreaKingy

4 жыл бұрын

Thank you for the advice! I tried doing that for a little bit and it was so difficult to learn. Ive definitely got to work on it. I really appreciate the positivity :)

@thecubingmagician1071

4 жыл бұрын

@@KoreaKingy You're very welcome, keep up the amazing content

@josephmcray9086

3 жыл бұрын

Yeah I would focus more on efficient f2l and then lookahead because jperm and other big guys out there say this. Also it just makes sense, you need to be efficient before you turn faster. Think about it, if you ain't efficient but you put all this time into doing it faster and then say it's time to get efficient, your gonna have to redo it again because you are working with a different way and you'll be slow again but then that is the time to turn faster

@josephmcray9086

3 жыл бұрын

Sorry, I'm one year late😂. How are you doing with cubing now? Have you gotten better or do you even remember how to solve it!??!! Btw I love running and solving cubes. Those are the only two videos I've watched so far of yours😂

@amariflipz2290

Жыл бұрын

Ya, that’s what I do when I’m solving rubix cube: my best time is 48 seconds

I just watched your running video and now see this one. Running and cubing are like my two main hobbies rn so it's so funny to find this channel! Keep up the good videos.

@KoreaKingy

4 жыл бұрын

Haha that is awesome. You must be able to solve really fast

@GoIrish2026

4 жыл бұрын

Literally same

@syndicalistspeedsolver

4 жыл бұрын

Same

@GoIrish2026

4 жыл бұрын

@@syndicalistspeedsolver I play trombone too

@syndicalistspeedsolver

4 жыл бұрын

@@GoIrish2026 nice

as a sub 20 solver (I use advanced f2l/1 look PLL/2 look OLL) I can say that you are officially a cuber sir

@KoreaKingy

4 жыл бұрын

Haha really? I still feel like an imposter, so thank you :)

@Paddingtonthefriend

2 жыл бұрын

I average low 30’s I use beginner corner by corner but I can do L’ U’ L U repeat until you make a block to make a block or R U R’ U’ repeat until you make a block also 2 look oll 2 look pll then a edge case

@muhammadfahadshahid8102

Жыл бұрын

Nice man....that's pretty fast....I want to know....how did u practice your cross??

@MrJasonReiser

Жыл бұрын

As a fellow sub-minute cuber, I salute you. Yes, compared with the professional level achievement that is a sub 5-second solve, a sub minute solve is a milestone. Personally I’ve found my fastest achievements have been from learning more f2l algorithms even one by one, and getting incredibly familiar with the color order on the cube. More algorithms and better familiarity make a look ahead approach possible. And not to give props to the original Rubik’s, but in all honesty their “connected” cube (Bluetooth with an app) is kind of awesome. It’s turned me from a consistent 1:15 solver (ao5) to like 0:55(o12) or better sometimes. PB on it is 0:38. The competitive aspect has been a real pleasure. I recently ordered a Gan 356 i3 which is basically their take on this. I suspect it’ll be fun too. Anyway - nice job. The 1 minute is like “I can Ollie” on a skateboard, and you can do it as you get older too and not risk broken bones. (No guarantee - I never dared to learn the Tony Hawk f2l algorithms.)

Great video. How long did the whole process take from your first solve to under 1 minute? I haven’t learned anything but the beginner method yet. I can solve consistently in 85 seconds and my best is 72 seconds…. But I can’t get any faster with the beginner method! This video inspired me to go learn F2L and start learning the faster more advanced methods! Thanks!

hey I have a question about the algorithm u did in the second layer I tried doing that but it failed how did u do that

Good video! Keep up the good work!

I really like your videos, might copy you cause it's so motivational

What is the second algorithm method called? I heard the first one but not the second one.

4:30 what's the algorithm to get the two layers solved fast?

U can learn more from j perm he will teach you how to be more faster

@vintex1422

3 жыл бұрын

Yeah j perm is fast

@vintex1422

3 жыл бұрын

You are pretty noob habit allies

@Pretsilz

3 жыл бұрын

@@vintex1422 he just started calm down

@remizu2901

2 жыл бұрын

@Romanian Language Yeah.

Hii I m impressed very much can u tell me which app you are using in your phone and which method you used to solve cube under 1 min and how much time it will took you from start to under 1 min

Any video suggestion on how to do F2L, I can't seem to find a good video

great work well done. what algorithm or app are you using there please! tia

Can you tell us what method you are using

This guy deserves more subscribers.

I’m kind of new to cubing, and I’ve been using the beginner method by JPerm. I’ve been trying to learn F2L, OLL, and PLL, but it’s seemed to be going a lot slower for me when solving my cube. My time is 2 minutes and 30 seconds, and I want to try to get to sub 30. Should I keep my beginner method or try to improve on F2L, OLL, and PLL? Also should I use only one of these methods and solve the rest normally or just what methods are the absolute best for speed cubing?

@rofiter3999

2 жыл бұрын

No, You need to learn F2l,OLL,PLL coz your going for sub 30 and that's fast and no matter how fast you move your fingers you have to move your fingers at least 120- 130 but with learning these methods you can get up to 60 moves and now you understand the difference. 😀good luck🙂 but nothing is impossible so you can try in beginners method

@ilzebolzane6402

2 жыл бұрын

@@rofiter3999 yea well didnt brody do a sub 10 beginner method lol

I amon my way to under 1 minute 😍😍. Seeing this video is no natural dude 😄

4:50 what video is it so I can get a better pb

which song did you use

Keep it up!

I've been looking for something like this, I can do it in like 2 minutes but I'm trying to improve my speed and memory. Thx

My average time is just under a minute... I got me a speed cube few years ago ever since then I got hooked on it 😬😁. I don't think I'll ever do it under 30 seconds. I'm comfortable with the solve set up I have. And by now is all muscle memory. I also dont wanna go all nerd mode

@hassaanmufti7079

4 жыл бұрын

Never give up I started a few months ago and average 23 seconds

@Zyphon_

3 жыл бұрын

@@hassaanmufti7079ive been cubing for 6 months and I average just shy of 20 seconds

@2staircases567

Жыл бұрын

I've been cubing for 3 months and average just over sub 15

But what was the method that you actually used to learn the under 60 seconds? Was it one of the above videos or was it another one?

GG! in the future you can try to solve 2 cubes in the time you solved one in this video, like i did

I'm still using the beginner method with a Rubik's brand and my pb with it 1.57. Can you please send a link to that second layer thing?

@Nunbody

3 жыл бұрын

Im also usimg a beginners method and My average is 54 seconds

What technique were u using at the end? Im curious cuz I wanna improve too

@TheGragol

Жыл бұрын

He used basic OLL and PLL at the end, not the standard beginner algo.

Did he use cfop after the beginners method

I know it's been two years but can I get the link for the five dollar cube?

Do you know the name of the method you used after you learned beginners method? I think its f2l? also the video that you used for f2l, im a beginner and advancing quickly, thank you.

@BANONEGuitar

6 ай бұрын

It looks like the roux method to me.

Congrats from Brazil, haha!!!

@KoreaKingy

4 жыл бұрын

Thanks! 😃

If I practice and make it the fastest I can, can I solve a cube in under 1 minute with the beginner's method? Like it is a long method. Method I use is: daisy-white cross-white corners-yellow cross-corners match-yellow corner-yellow full side done-full cube solved. I only use Right and Left algs and it takes forever to solve a cube. Any algorithms to cut down my time doing only these 2 algs? Thank You.

Your cube is amazing where did u buy it. OMG I’m in love with you cube, such a sleek design

@quad5430

4 жыл бұрын

Speedcubeshop.com or thecubicle.com

@KoreaKingy

4 жыл бұрын

I bought mine in South Korea but the links above from LKlucifer are great

It's actually very possible to achieve sub-1min times using the beginner method. Sure, there are some changes, but the method still stays the same. Nevertheless, entertaining to watch:)

Was that f2L method at last ?

Idk if I seen that correctly but did I just see a 2-look oll ALG and f2l but only managing barely under a minute you could easily be sub 40 with better finger tricks and a quicker reaction to the cases you see

@KoreaKingy

4 жыл бұрын

Yea I had quite a bad reaction to the cases

My average time is 1 min 5 secs with beginners method. I’ve learnt f2l but it takes me longer to find the pairs. I want to become better and learn oll and pll to get my time down to under 30 secs.

@KoreaKingy

4 жыл бұрын

Keep working at it, good luck!

@mitchellpile1111

4 жыл бұрын

Sameeee

Any update on 5 minute a Mile challenge ?

@KoreaKingy

4 жыл бұрын

I'm now running again after a severe ankle injury. I haven't decided when I'll post an update but it will definitely be coming!

@MSBJatt

4 жыл бұрын

Looking forward to it ! Nd get well soon 👍🏻

And thats how people bacome speedcubers...

nice vid!

I also watched this vid to learn and i am really good at it now

@KoreaKingy

4 жыл бұрын

Yea there are a bunch of great tutorials out there

When I first started I solved the Rubix brand cube with beginner method in 30 second and that's how far I got with it

Wow! Nice and motivational. I have known the beginners method for almost 10 years, but I've started to learn CFOP couple months back. Just need to learn the 2loll and 2lpll and I will be sub 60 too. Really nice!

@thevictor180

4 жыл бұрын

TEN YEARS?

@KeisariCubes

4 жыл бұрын

@@thevictor180 yeah. Learned beginners maybe 09-10 and never looked to progress or wasn't aware of speedcubes. Now I have one on the way and I'm interested in becoming sub-30 for starters :)

@thevictor180

4 жыл бұрын

@@KeisariCubes wow, so if you want to be sub 30, it'll be a lot easier if you learn intuitive F2l, then I'd recommend getting a start on Pll because 21 algs aren't really hard if you keep on a constant rate, like an alg a day

@KeisariCubes

4 жыл бұрын

@@thevictor180 I know the basics of intuitive f2l and will start with plls soon. Especially the ones I already know from 2look pll.

@thevictor180

4 жыл бұрын

@@KeisariCubes That's pretty good, just keep going!

Omg thank you so much for not using a rubik’s brand!

@Wisss

4 жыл бұрын

wow u trolled me

@insxlinto6309

3 жыл бұрын

He is

@romanpearce3949

3 жыл бұрын

I'm I the only one who loves the original rubik's cube?

@dabb607tfffffffffff8

Жыл бұрын

​@Roman Pearce no i like it

@Terrier1217

Жыл бұрын

@@romanpearce3949turns suck on those

Did you use CFOP method since I wanted to know if you can solve a cube with the begginer method in under a minute but it doesn't work so i watched your vid.

@cxnaruto4931

2 жыл бұрын

I also want to know the same

What method. Intermediate F2L and OLL and PLL??

@TheGragol

Жыл бұрын

2 looks OLL and PLL

Nice

The cubical helped me now im a cuber

I used to know how to solve a 3x3 under a minute and a 2x2 in under 10 seconds and 12 sides hexagon one in an hour

0:54 2nd step is the first layer corners, not edges.

4:00 You can definitely go faster with beginners method. I hit 44 before I learned f2l and my first PLL/OLLs. Later on I pulled sub 30s with beginners. Nice videos bro, keep it up.

@carmike17

3 жыл бұрын

I've seen comments similar to this on other channels, and it's always amazed me. I'm new to cubing, but after a couple of weeks my best time is still 99 seconds, and that was a very lucky scramble (after solving the yellow cross I was able to jump straight into the yellow corners, and two of them were already solved). If my only goal is to consistently solve a cube sub 60, should I try to learn f2l now, or just improve on my weakest points on the beginner method?

@Thatguyujustmet

3 жыл бұрын

@@carmike17 It's never too early to start practicing F2L. F2L doesn't require memorizing algorithms, it's straight up intuitive and will replace your current two-step process of solving corners then edges.

@4:56 First thing... THE CAMERA ANGLE IS KILLING ME!!! LOL.... Secondly... where did you learn that algorithm? do you have a link or a video to point me to? I can't find that one no matter how I look it up.

@TheGragol

Жыл бұрын

kzread.info/dash/bejne/mJON0dRmqcfAmtY.html

my 7 year old son and i are doing the same challenge together during his school holiday!

I still need Help with this, Please!

Niiiiice

wow :)

1:35 **CRUNCH CRUNCH CRUNCH**

The background music is a bit too loud and is covering your voice.

You look completely destroyed when you did it!

Well done! :D My best right now is 1 minute and 22 seconds and it was with beginner method. Edit: 1 minute 7

@quad5430

4 жыл бұрын

Good job!

@corantik6118

4 жыл бұрын

Thanks now it's 1 minute 7

What is the name of the faster cube ...?

@KoreaKingy

4 жыл бұрын

Yuxin little magic

@quad5430

4 жыл бұрын

@@KoreaKingy It's one of the best budget cubes

My best time right now is 1 minute and 13 seconds, and my goal is to get under a minute. Being able to go crazy and get 3 seconds would be a dream but I’m only looking to get under a minute :D

@whydo_ilive3460

2 жыл бұрын

You should try doing the CFOP method, but it's really hard, took me 3 days, it'll be better if you learn CFOP individually, learn C then learn F the next day.

@chiccynugs7164

2 жыл бұрын

@@whydo_ilive3460 I slowly am learning this method, and I took a break on it just to try to improve hand speed. Currently can consistently get 45-55 seconds per cube consistently!

Well I had the same one he had at the start so with that method but I got it under 2 mons

U can solve the Rubix cube with beginners method and I did it in 40 second

How is your running challenge going?

@crazychop623

4 жыл бұрын

Trying to get faster myself.

... i been cubing for over a week now and my best sole in 1 minute and 39 miliseconds

Tbh my brain is dead rn

you can use the rubiks brand to solve in 15 seconds lol

I’ve done it for a week and my pb is 59.65 seconds

My fastest time in 52.48 second for the rubric cube solvers is that a good enough time

good for you my best at Rubik's cube is 48 seconds

That’s how I learned

Logo aside, you can tell from that horrible sound that it's a Rubik's brand cube XD

@KoreaKingy

4 жыл бұрын

haha true that

Although I love cubing, I would never say it's funner than coding.

yo I also learned from the same vid

incognito mode in background mhhhm what is that?

How did you get under 1 min without using finger tricks and using wrist turns? It's a little sus

Instead of showing all of the next better times you could gave shared the method you used to solve the bottom 2 layers at the same time or shared how you got faster to help others.

he has the incognito open :=

How

I switched to the cube you bought and love it.

ty now my best is 37.145

Pro tip: do not use a Rubik's brand!!!!!

@KoreaKingy

4 жыл бұрын

Definitely right

I just solved this under 3 minutes😂 the video is on my channel😊😊 it was fun!!!🙌 #subbed👌

How does he not know the reverse fish I'll ALG but a different 2 look ALG

@KoreaKingy

4 жыл бұрын

No idea lol I learned in a very non-conventional way I guess

0:56 you accidentally said first layer edges when you have to say first layer corners

My fastest solve with the bigenners method is 1 minute 41seconds

@KoreaKingy

4 жыл бұрын

Nice. I have heard that you can get quite fast with the beginner's method. Keep going!

I recommend #JPerms channel I believe his tutorial is so much easier

@hassaanmufti7079

4 жыл бұрын

I can’t believe when I was learning I used this one and didn’t even know what the cubical was 😂

@LolGlaceonTM

4 жыл бұрын

#JPerms channel is one of the best cubing channels out everyone else

my best time with the beginner’s method is 24 seconds hahaha

@destiny7269

4 жыл бұрын

mine is 17

@asiankidlol3231

4 жыл бұрын

Bruh how

How creeky his cube is!!😰😖😖

I solved 3x3x3 rubiks cube in 53 seconds

I use that method and I solve 1

Best time: 56.14

I can slove the cube using beginners method under 1minte

should have kept trying to get sub one minute using the basic method. i did it. so anyone can.

Minute*

I am like LEARN CFOP

I know how to solve it

Me searching d vid to solve d cube within 30 seconds Bcoz I solve d rubiqs solve d cube within 40 seconds but this vid I download & seeing this within 30 seconds he is sooo slow yaar🤣🤮

in a wek of trianing i can solve the cube 25 sec

We can clearly see the steps on you phone in 7:12 so you’re cheating

@KoreaKingy

Жыл бұрын

lmao bro cmon, I forget what they are but why would I cheat on something like this. There's like 20 moves there but I did wayyy more than that.