Heres a link to throttle body and injector cleaners so it will save you from buying a new throttle body. amzn.to/2u2drou

@joeybananas347

4 жыл бұрын

There is this guy on KZread cleaning the throttle body with the car running and spray directly into the throttle body there is a little hole just before the throttle body opening so he could stick that red tip in it and just spray while the car is running and spray through the intake and he says it cleans the valves

@mouralessable

4 жыл бұрын

Thank you

@mouralessable

4 жыл бұрын

L320 rrs o2 sensor replacement vids?

@mattsalazar9402

Жыл бұрын

Will cleaning wipe away the check engine light? Thanks for the help!

@oxmanagain

Жыл бұрын

@@mattsalazar9402 it all depends on what code popped up on your dash. This has turned off my light before and poured in injection cleaners has turned it off before. Just depends on what is causing your check engine light. But this is pretty much free and easy. Thanks for watching.

The music wasn't too bad, but a little distracting. Plus there were birds, which I liked.

@khejanamccoy9058

3 ай бұрын

Mann 🤣🤣🤣

'06 rrs. Opened back end and saw hardened carbon ring around the inside of the tube where the plate sits. After cleaning, no more idle fluctuations. Your instructions are wonderful. Thanks.

100% better than other videos that I have seen on cleaning throttle bodies ... Great job ... 👏👍

Thanks, had check engine and red lightning light on in my 2014 dodge avenger. Couldn't get above 2k rpm and was worried, few bucks and 30mins of my time and it's working right again! Beats paying $500+ at a repair shop!

I watched a couple videos how to do this, then cleaned mine yesterday. today your video popped up and I gave it a look. I wish I saw your video before I cleaned mine. no one ever mentions the intake manifold. great video from someone who just cleaned their throttle body.

@LH81633

4 жыл бұрын

Paul Kolazinski just make sure that you change your pcv to prevent blow by and keep air filter in great shape, use lots of good fuel injector cleaner to prevent clogged injector wich will fualt out your plugs creating smog/carbon build up again!!!

Great video. I have to completely clean my throttle body on a 1995 Lincoln Town Car that has 175,000 miles. This is exactly the help I needed. Thanks!

@oxmanagain

5 жыл бұрын

Thanks for watching.

I have a 91 Chrysler LeBaron with a 3.0L Mitsubishi engine. The Idle air control module is bad, so I ordered a replacement. The car is in good shape but has a lot of miles on it so I decided to do the whole job and clean everything. Your video is aces! Since my throttle body is mechanical, I'll remove it like you did to clean it. I suspect when I'm finished the car will idle and accelerate a whole lot better. Thank you for your help. It is most appreciated. Stay well in this terrible virus situation.

Great video! I tried cleaning the throtle body yesterday and gave up because I opened up the wrong side ( air filter housing side) it didn't look like a throtle body was in there plus it was getting dark outside. Before taking my car to the dealership I came across your video and now I'm more confident about doing the job myself. You saved me hundreds!!! Thank you!!

@oxmanagain

3 жыл бұрын

You're welcome thanks for watching and I'm very impressed that you tackle this yourself.

I like the way you do these , thorough and complete , nice work

great video, you explain it very well. With all due respect I would like to add: be sure to cover the intake hole after you remove the throttle body, if you drop anything down into the engine, ie screw driver, nut, bolt, etc. you will have to get a knew engine or take your engine totally apart to retrieve said item. Again, great video, well done.

Thanks for the video. My suv has an electronic throttle body and I didn’t realize there was a difference. Also I’m glad you’re wearing gloves and a mask. You don’t want to breath the fumes and the cleaner can be absorbed through the skin. I worked in a shop for many years and a lot of techs just don’t want to take the time. Thanks again!

@oxmanagain

4 жыл бұрын

Thanks for your comment and thanks for watching.

@panderson4283

Жыл бұрын

agreed, though in all fairness, a surgical mask does nothing for aerosol/fumes and vapours (or viruses for that matter). You would need to wear a respirator to block such fumes. It does help with larger particles , dust , etc. Great video!

I know I'm 6 years too late,but what a great video,you are very good at explaining things,top work man 👍👍.

Helpful video. Good explanation, visuals, lighting, etc (background music messing with my hearing and listening to you though). Very well done and helpful. Thanks.

So glad I saw this before spending $200 on a new part! Thank you!

Good thing you removed the TB off the second vehicle. Worth the effort. Thanks for posting this video!

You gave me EXACTLY WHAT I NEEDED TO KNOW??? YOU ARE WONDERFUL!! THANK YOU!!!!

My jaguar was running and idling really bad. Cleaning the throttle body fixed the problem. Thank you.

@oxmanagain

7 жыл бұрын

Akram Rabah you're welcome and thanks for watching.

This is the video that really helped me learn about cleaning throttle body. Thanks !!

Excellent video and instruction. Thanks bro. Did this before putting on a CAI!

Man you saved me from taking this car to the dealer my c5, I did exactly what you said do and it worked,you saved me time and MONEY (Thank you)

@oxmanagain

4 жыл бұрын

I'm glad to help out a fellow Cadillac owner. Thanks for letting me know.

@MichaelLee-nt9dp

3 жыл бұрын

Got a check engine light? Want to learn how to check it out yourself? Watch this to learn how to use a scan tool! www.youtube.com/watch?v=pN4Kn...

I like your statement & your DIY attitude. Glowing Cleaning!!! Happy New Year.

Thanks for the tips. Watched the video, cleaned the tb and now there's no more hesitation. Smooth as silk.

@oxmanagain

6 жыл бұрын

I'm glad I could help and give yourself a pat on the back because you just saved about a $100. Thanks for watching.

Great vidio,no B.S.,just the straight dope! Thank you for your effort.

Thank you a million for your tuition it helped a lot I've been through different mechanic all 4 of them didn't quite exactly solve the problem in my Audie each one of em they made me buy unnecessary car parts for no reason whatsoever but since I've tried your methods there's a huge change on my car✅👍

Really well made video, you explained everything well and you could see everything you were doing. That must have took some time to put together. Very much appreciated! Great job! Thank you!

Great video,so easy to understand!! 👍 ...and I was so busy listening to you I didnt even notice any music!! I'm amazed some complained!

@oxmanagain

3 жыл бұрын

Thank you.

Great details. Very nice. Now to figure out the throttle relearn process without a bi directional code reader. Thanks again!

Very good video...I watched a few others that really didn't show or tell what you did...Thanks 👍👍

Thanks for the video. I own an 06 sts with the northstar engine and I appreciate all the vids pertaining to your cadillac. Very helpful.

@oxmanagain

8 жыл бұрын

hey no problem and thanks for watching by the way nice car haha

@historyhunter5215

6 жыл бұрын

Gillion Downer northstar sucks balls yo

@Chickenassable

5 жыл бұрын

Any head gaskets blown yet with that Northstar?

I would like to expand on what you said about "you can snap your finger" if you leave the throttle body pugged into the vehicle, it could energize in "ice break mode" if it does this it will close driven by the reduction gears and it could cut your finger severely. Your video is spot on, I just want others to know the danger for leaving it in circuit. Thanks!

@oxmanagain

3 жыл бұрын

I thank you for adding your comment.

Thanks for the illustration, great job.

Thanks for sharing. I have the lighting bolt on my 2017 Jeep Patriot. I hate that there are so many place around Chattanooga, TN that rips off women when we take our car in to get fix. I am depress cause there is no tell what kind of quote I will get to fix my problem . After watching this video, it seems rather simple. I just do not have the confident to do it myself. Wish I was married to a mechanic.

Great video... I'm getting a can of CRC and cleaning my 3 vehicles throttle bodies... thank you for the awesome video.

You ARE the man.....Great video, great explanation, great hi-res pics. I will do this and MAF cleaning on my 2004 Ford F-150, 4-1L to try to get rid of my check engine light so I can pass inspection. Thanks again. Be well.

@oxmanagain

4 жыл бұрын

Thanks and I appreciate your comment. Have a good day.

Great video! I liked that you show both styles! Thanks for sharing, subbed.

Excellent info man! Thanks. I picked up a can of cleaner at noon today. Will use it this weekend.

@oxmanagain

6 жыл бұрын

Thank you for watching and let me know how it goes.

Thanks for the video. You’re a great instructor.

Great job and details on the cleaning of the throttle body. I gotta clean or replace mine on an 2005 Chevrolet Uplander, never have messed with these electronic engines much but thanks to you and the video i think i can handle this job.

@oxmanagain

6 жыл бұрын

You're welcome and thanks for watching.

I'm researching how to clean my throttle body right. I appreciate the detail you went into. I'll try not to go crazy with the cleaner and thanks to you I'll make sure I clean the edge, which I haven't heard explicitly on other videos. I am thinking maybe I should take it off after watching the second throttle body cleaning. I'll need to do a bit more research about my exact vehicle to see what all might be involved with that.

Great job explaining this! Thanks!

Good thing I learned to do maintenance on my first car besides oil and filters. While changing my oil sometimes I'll check the throttle body while it drains and do a quick cleaning if needed with shop towels from autozone and the cleaner is awesome, some shop while they did my AC i asked them how much and service was like $120 lmao, I saved more money doing work myself that I can do thank god.

Very easy to understand video! Thank you for sharing this info!

I'm doing this to my car on the weekend and this video was a great help 👍👍

@oxmanagain

3 жыл бұрын

Let me know the outcome. Thanks for watching. You have a nice day.

thanks dear very nice video despite the music greetings from your followers in Kuwait

Good video man! Very thorough!

Good Job Brother!!! I did it to a 91 Sentra w a GA16DE AND WOWEEEE 180,000 miles...it ran like NEW!!! But the guy I got it from had put the cheapest A-zone wires on it...I am still amazed it ran good enough to pass smugg...after I got the correct 7mm Wires on it...ohhhh man...night n day...now it runs...heehee... awsome...

This has ton of info, thanks for making a detailed video to such an extent

@oxmanagain

6 жыл бұрын

You're welcome, and I appreciate you for watching.

Great video. Thanks for the tips. I'm going to try this on my truck today!

@oxmanagain

6 жыл бұрын

Thanks for watching and let me know the results.

Great videos 👍🏻

Man, You are my hero! Many MANY thanks for your advice.... You just save my day! Hello from Montreal Canada! Have a nice one Brother!

@oxmanagain

7 жыл бұрын

tomitomtom You're welcome and I'm glad the video helped you and your dad out. Thanks for watching.

Great video! I like preventing! Rather then masking!! Air filter, plugs!!! And lots of fuel injector cleaner to prevent clogged injector! Those three if bad equal carbon build all over! I use Lucas fuel injector cleaner and laquar thinner to keep things clean!

Great demonstration and explanation..

Thanks for the tips and examples bro!

You doing very good job 👍👍👍👍 Very nice video 👌👌👌👌👌 Very good teaching very good Teacher Thank you so much for Teaching

Very good video young man Thank You Joe

When I'm already enjoying the video and than at 7:17 I see the ole "Vortec" and like it that much more because the vehicle I'm researching this for is a '95 Chevy Pickup! 😎 Great Video! 👍🤟

Thank you for taking me back too school

Thanks, young Kareem Abdul-Jabbar! :D

@oxmanagain

5 жыл бұрын

Haha that is a first. Thanks for watching.

"I had to put a mask on...." Haha, lol! Welcome to 2020.

We got a Ford Figo 2011,and the light comes on at times,so I'll be following your instructions and will give feedback..

Awesome video. Great information. Thank you for sharing.

Awesome, thank you for posting. My 2008 Ford Explorer sport trac has a similar code and now I know what to do. What about the rubber gasket, did you just reuse the same one? Oh, and the music did not bother me at all.

Great post, Oxmanagain.

@oxmanagain

7 жыл бұрын

Thank you.

Damn good job and easy procedural video. Thanks

@oxmanagain

6 жыл бұрын

I appreciate you watching.

Great video! Keep it going.

That (Lip) up in there is a Butterfly to us oldschool machines a Blade to the new school computer button pushes. Good video and the removal cleaning will work wonders CRC throttle body and Mass Air Flow sensor cleaner is my choice.

Good job man, I'm gonna do mine today. Thanks

@oxmanagain

6 жыл бұрын

Todd Barlow You're welcome, thanks for watching.

Great Video keep up the good work. The only thing I would have done different is pull that red rubber seal out before spraying the cleaner just in case.

one of the best videos I seen thanks! I have a cadillac 2004 cts and my car for some reason didn't acellarate at all my throttle cost 220$ I clean the outside and it works but I will clean the inside to get better performance

@oxmanagain

7 жыл бұрын

Thanks for watching, I appreciate the nice comment. I'm glad the video helped. Thanks again

Fixed my hard starting issue thanks

Just a tip, using ACF-50 on your electrical sensors, does wonders for protection. They only use that product on airline jets, most likely the military also.

Thank you. You saved me a whole lot of trouble and money I hope...Got a P0507 on my Titan v8 5.6. Any advice? Going to clean it all up and replace the icv.

@sawyerbennett8227

4 жыл бұрын

same here how did you fix it

Music is a little distracting for being loud. But the video is informative.

@laragreene8328

3 жыл бұрын

I didnt even notice the music...I was too busy listening to him! 😁

@luisrios210000

3 жыл бұрын

Honestly stop being a pussy and open your ears

Thank you so much. Yesterday Firestone told me it will cost $511.21 to replace mine!

@oxmanagain

4 жыл бұрын

I'm glad I was able to save you a little bit of money.

Glad you ended up cleaning the edge of the valves. If you don’t the carbon build up won’t allow the valve to close fully and then that negatively affects the computers calculations for a smooth ride.

Real Nice job! Thank you for sharing

great video, my man!

Great vid, very informative. Thanks for taking the time to make it. My only feedback is reduce the volume of the background music or leave it out completely, it was distracting and even drowned you out at some points.

@DanSmith-cb5vj

3 жыл бұрын

Yes, the music needs turned down so to hear you better. What you are saying or teaching us is more important than the background sounds/music. Thank you sir!

Thanks for this video, very helpful all up In here

Thanks for posting.

Great video/instruction.

Had surging problems with my car in cruise-control or normal driving particularly in the cold. Took it to two Dealers who service my make of car and they said they didn't know what the problem was other then to clean the injectors. Did the old youtube check and came across this, I did the clean and the car ran heaps better. Then I saw the Mass Air Flow sensor clean and cleaned that also and the car is running perfectly. Goes to show not all people who work at Dealers know their cars, and obviously saved myself a heap of dollars.

Thank You Kind Sir for making this video. Very helpful, I have a v70 2001 volvo wagon

@oxmanagain

5 жыл бұрын

You're welcome and thanks for watching.

On my Dodge Journey you have to recalibrate the TB using a scan tool. Excellent video,👍👍👍🇨🇦

Great detail really informative!!!!

Thanks for the video is very helpful!

@oxmanagain

5 жыл бұрын

Thanks for your comment.

Thanks for the video. Could you please show all the steps for removing the throttle body that has the spring?

@oxmanagain

7 жыл бұрын

Gemini Love I'm sorry I don't have that vehicle anymore. But all you do is remove the three or four bolts and then your throttle body will be able to detach. If you don't want to take the cable part off just tilt the throttle body to the side you can spray the front and back wipe it down. If your gasket needs to be changed put a new gasket on reattach it and then you're done. I appreciate you watching if you have anymore questions feel free to ask thanks.

After disassembling and cleaning the throttle, an idle defect may occur, therefore an idle adjustment process must be performed after cleaning, there are several methods depending on the type of vehicle. Also, it is important to lubricate the moving parts of the throttle by using WD40.

@Yemetey-gf8yx

4 жыл бұрын

adjusting by tuning?

Great video. Thanks for posting!

@oxmanagain

7 жыл бұрын

You're welcome, thanks for watching.

Great video. Thanks

thanks for the tips....im going to try this on my ford ranger....thanks again...this is well worth watching....

@oxmanagain

7 жыл бұрын

I appreciate your time and enjoy working on your truck, it's very rewarding to do stuff on your own.

@tkking188

5 жыл бұрын

Roy Dineen...Yes I did it for my Ranger and it solved all crazy idling problems I was having...👍

excellent work

Nice vid amigo. Thx for sharing.

Thank You! Great & thorough video!

@oxmanagain

7 жыл бұрын

Thank you.

Thanks, will help for sure.

@oxmanagain

3 жыл бұрын

I'm glad the video help you and thanks for watching.

Thaks bro, thats help me in my LR3. Blessings

Great video I'm a subscriber! 👍

Useful clip. Thank you

great video. Thumbs up for sure. Thanks for posting.