Large mount husky fits perfectly on the 590 as far as chain tensioner stud the only thing you need is I used 3/8 copper tube and cut little pieces off and you got to tap them on the bar studs and there won't be hardly any Rock in the bar up and down
@Saw_Squatch2 жыл бұрын
Every bar I buy is d025 Stihl large mount and I just use adapters to fit accordingly. Eventually as bars wear out and I replace them I'd like to get as many bars as I can to fit the same pitch and gauge so I can spin all my chains off 2-3 rolls
@KainKustomGarage2 жыл бұрын
Steel brake line tubing works good for spacers too....
@zeromark2022 жыл бұрын
Stihl 12mm
@IowaPerformanceSaws2 жыл бұрын
Great stuff!!! This is what a lot of people need to learn!
@richardhatfield915 Жыл бұрын
Thank you I have learned much from you since I have been watching your videos.
@fixtritephil7712
DO 33 for Sachs Dolmar is 14mm wide. Do 25 will fit if mounting slot is milled 1mm wider.(.040) nominal.DO33 no longer available in 24"...
@jessdoeling97322 жыл бұрын
I cut roll pins to fit over studs.
@randybarnes66612 жыл бұрын
That’s slick buddy thanks going to try that myself now 👍
@copperjacket00
I was thinking metal tubing on the bolts for spacing .
@thomasgronek6469 Жыл бұрын
The roller tip could be a cool idea. No need to worry about the pitch, maybe not even the gauge of the chain.
@lassila32 жыл бұрын
Those bars are incredible quality S2 steel probably!
@scottymac734
Nice info, but that's one expensive spacer. LOL
@FillBetto
UPS brought me the bar n chain today. Unfortunately I ordered a 20" setup (my old Echo). My newer Echo is an 18". I'm wondering if the 20" stuff will run ok on the 18" saw. I'm only cutting a few 10" trees.
@jwoods3452 жыл бұрын
I have a large mount husqvarna bar that fits my 4000 poulan. For some reason they put the same bar from the factory on the 4000 that they used on the bigger 4200 and up saws which I think may be a d76 or d276. I can't remember. My saw has the s shaped spacer so the husky large bar and the original windsor fits nice. Another great vid interesting bar 👍
@justinterrell95552 жыл бұрын
I think you did a video of putting a large mount on a 55 husky the same way you did that should work on the 590
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
That Partner bar looks pretty good!👍s 🆙BigGuy!
@robertshoemaker62042 жыл бұрын
So Partner was merged with Pioneer of Canada years ago....Parther is part of the Electrolux Group....owner of Husqvarna..... and Jonsered and Poulan.... Good job with the spacer..first time watching your videos...enjoyed it.Shoe
@John-cj3ve
Can you suggest the closest 20" bar to fit an EGO CS1800? I KNOW the powerhead is plenty strong enough to pull it.
@KainKustomGarage2 жыл бұрын
Cool man! I think I saw those on Ebay, I was tempted....lol😊
Пікірлер: 44
Large mount husky fits perfectly on the 590 as far as chain tensioner stud the only thing you need is I used 3/8 copper tube and cut little pieces off and you got to tap them on the bar studs and there won't be hardly any Rock in the bar up and down
Every bar I buy is d025 Stihl large mount and I just use adapters to fit accordingly. Eventually as bars wear out and I replace them I'd like to get as many bars as I can to fit the same pitch and gauge so I can spin all my chains off 2-3 rolls
Steel brake line tubing works good for spacers too....
Stihl 12mm
Great stuff!!! This is what a lot of people need to learn!
Thank you I have learned much from you since I have been watching your videos.
DO 33 for Sachs Dolmar is 14mm wide. Do 25 will fit if mounting slot is milled 1mm wider.(.040) nominal.DO33 no longer available in 24"...
I cut roll pins to fit over studs.
That’s slick buddy thanks going to try that myself now 👍
I was thinking metal tubing on the bolts for spacing .
The roller tip could be a cool idea. No need to worry about the pitch, maybe not even the gauge of the chain.
Those bars are incredible quality S2 steel probably!
Nice info, but that's one expensive spacer. LOL
UPS brought me the bar n chain today. Unfortunately I ordered a 20" setup (my old Echo). My newer Echo is an 18". I'm wondering if the 20" stuff will run ok on the 18" saw. I'm only cutting a few 10" trees.
I have a large mount husqvarna bar that fits my 4000 poulan. For some reason they put the same bar from the factory on the 4000 that they used on the bigger 4200 and up saws which I think may be a d76 or d276. I can't remember. My saw has the s shaped spacer so the husky large bar and the original windsor fits nice. Another great vid interesting bar 👍
I think you did a video of putting a large mount on a 55 husky the same way you did that should work on the 590
That Partner bar looks pretty good!👍s 🆙BigGuy!
So Partner was merged with Pioneer of Canada years ago....Parther is part of the Electrolux Group....owner of Husqvarna..... and Jonsered and Poulan.... Good job with the spacer..first time watching your videos...enjoyed it.Shoe
Can you suggest the closest 20" bar to fit an EGO CS1800? I KNOW the powerhead is plenty strong enough to pull it.
Cool man! I think I saw those on Ebay, I was tempted....lol😊