No video

How to Fix a Stuck Chainsaw Brake

Step by Step!
Today we'll be looking at a chainsaw that has a stuck chain brake.
The reason they usually get seized up is because the spring track gets filled with sawdust.
It's usually a quick fix, and you can complete this using basic tools!
I'll 1st explain the fundamentals of how the brake system works, and then show you how it gets seized in the 1st place.
We'll then clean and lubricate it, so it doesn't seize again.
Once chain brake has been cleaned and the spring track has been lubricated, I'll show you how to reset the chain brake spring. We'll then reinstall it onto the chainsaw.
I'll then show you how to properly adjust the tension of the chain, so we can start up the chainsaw and engage and disengage the chain brake!
Simply follow the steps in this video, and your chainsaw will be back up and running in no time!
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
Instagram: ELMN80R
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks

Пікірлер: 241

  • @EliminatorPerformance
    @EliminatorPerformance2 жыл бұрын

    Go to 4:56 if you have a cover that won't go back on!

  • @christophevinson

    @christophevinson

    Жыл бұрын

    Great. Thanks for your help. I 've been struggling for weeks on this brake reset...

  • @michaelcheeto6213
    @michaelcheeto62134 жыл бұрын

    The only brake video that I've found that explains it and shows it being done. It all makes sense.

  • @EliminatorPerformance

    @EliminatorPerformance

    4 жыл бұрын

    Thanks for watching!

  • @uriah-s97

    @uriah-s97

    28 күн бұрын

    Same

  • @robertsmyth2796
    @robertsmyth27968 ай бұрын

    Mr. Eliminator, you saved my day. My brake seized cutting a large tree for firewood. My saw is not a Husqua Varna, but it was identical brake system. Carb aerosol cleaner worked great on cleaning the gunk and when cleaned I used small amount of Liquid Wrench aerosol. The 9/16 wrench and screwdriver snapped the seized brake open. Thanks again. - Bob in Arkansas Woods.

  • @kenellison2137
    @kenellison21374 ай бұрын

    This is hands down the best video on this issue. Outstanding! You saved me an hour of driving to the repair shop.

  • @LycanPaw
    @LycanPaw10 ай бұрын

    I've spent 3hrs trying to fix this thing. Bloody finger included. Took it apart and all. Figured I'd have to buy a new one. Then by luck, I stumbled across your video and in 5mins it was fixed!!! You sir, are a true Captain!

  • @craigcummings1348
    @craigcummings1348 Жыл бұрын

    I agree with other people who have posted: this was an excellent demonstration and explanation of the chain brake, how to maintain it and how to fix multiple variables to why it might not work properly. Great addition if repair with caution being explained. Great video- just what we needed to hear; no extra chatter (Ha!). Thank you so much.

  • @EliminatorPerformance

    @EliminatorPerformance

    Жыл бұрын

    Glad you enjoyed it!

  • @mjbutterfish
    @mjbutterfish5 ай бұрын

    Too good! Straightforward and no theatrics. Thank you!

  • @waynestefinashen239
    @waynestefinashen2394 жыл бұрын

    Yet another well organised, well edited and too the point repair video showing exactly how to fix a problem. Keep them coming!

  • @EliminatorPerformance

    @EliminatorPerformance

    4 жыл бұрын

    Thanks for watching!

  • @seetomYEG
    @seetomYEG2 ай бұрын

    Bravo! I caught a piece of ancient barbwire in my saw and had a bear of a time putting everything together. But thanks to your awesome explanations, I'm good to go! 💪

  • @paulhale5317
    @paulhale53177 ай бұрын

    I have a Poulan 5020V saw. A few years ago something happened, the brake spring triggered, and I couldn't put the cover back. I didn't understand how the brake worked and so I removed the brake assembly and used the saw that way. I know.... not very smart move. Anyway, since I saved the parts, I thought I'd give it a shot to fix it today. Your video, as so many have commented, was perfect! The trick to use the 9/16ths open-end/ closed-end wrench worked perfectly. Thank you for taking the time to share your experiences!

  • @raysebesian7990
    @raysebesian799011 ай бұрын

    one of the best self fix it videos I have ever searched for, thanks, you saved me a repair shop bill.

  • @andrewtravis8678
    @andrewtravis86782 жыл бұрын

    Thank you for an informative and well presented video on the workings of a chain saw brake. I had a couple of problems trying to get a new saw chain on my Echo CS400. After watching your video I ran up to my garage and followed the steps you presented. Yesterday I was in tears. Today I'm all smiles looking forward to cutting more firewood. Thanks again. Well done! 👏

  • @LesHudson-nv8tv
    @LesHudson-nv8tv3 ай бұрын

    Ever so grateful for this! Spent an hour pulling out my hair and gave up resorting to KZread University. This video was THE RIGHT ONE! thank you

  • @aidanlawson2147
    @aidanlawson2147 Жыл бұрын

    My man, you absolutely saved me! This was exactly what I needed to fix my chainsaw. Thank you so much

  • @jodygautreau4982
    @jodygautreau49829 ай бұрын

    Very good video. Excellent details. Followed instructions and had saw fixed and running within 30 min. Saved around $45. Thanks

  • @user-td2kv3ky5z
    @user-td2kv3ky5z5 ай бұрын

    I was trying to put my cap on for an hour. I knew that the inner lock was to small to fit over the clutch but didn't know how to expand it. As soon as I seen you turn that 3 pronged dial with the 9/16 wrench and screw driver I knew that's what I needed to do. I did that and my cap fit right back on just like it should. Thanks a million..... It's great that you took the time to show others how to fix this problem. Thanks again.............

  • @johneubanks5951
    @johneubanks59517 ай бұрын

    Good knowledge.. thanks for the video..worked perfectly for tripping this Jonsered saw I picked up for $10 bucks at a yard sale...saw works good now ..🤘🇺🇸

  • @558vulcanxh
    @558vulcanxh Жыл бұрын

    Thanks for a very instructive video. I can't pull my engine over with the brake engaged so this should be very helpful 😊 thanks again Sir

  • @zydanny
    @zydanny2 жыл бұрын

    Thank you. I had this problem just yesterday and wasted half the day trying to guess how to get a cover over a closed brake and finally, as light faded, I found this vid. Brightened my mood considerably.

  • @EliminatorPerformance

    @EliminatorPerformance

    2 жыл бұрын

    Cheers!

  • @susyforfa
    @susyforfa9 ай бұрын

    Thank you so very much for this video. My husband was able to fis our husqvarna 455 rancher without buying parts. You are direct and very informative. Please keep up the great work.

  • @dougmacpherson6732
    @dougmacpherson6732 Жыл бұрын

    Fantastic explanation regarding the brake system. Turned out my brake was slightly out of place. Your video has just saved me $ Thank you so much

  • @coastwatch203
    @coastwatch203 Жыл бұрын

    What a fantastic, straight to the point explanation on how to rectify a problem ! Kudos from Australia - much appreciated bro.

  • @edwardmarks1766
    @edwardmarks17663 жыл бұрын

    Very straightforward without all the hyperbole. Well done!

  • @user-rx7tm1vw3k
    @user-rx7tm1vw3k5 ай бұрын

    This save me big time. So close to ordering a new one but too stubborn to do that yet. Glad to not see your face in half of the video like so many do. Thank you.

  • @EliminatorPerformance

    @EliminatorPerformance

    5 ай бұрын

    Only at the beginning and the end, glad it helped, cheers!

  • @pullmyfinger6932
    @pullmyfinger69327 ай бұрын

    You're starting to look like Eddie Spaghetti. Great vids ALWAYS, thanks for the help once again!

  • @ginnglassblock
    @ginnglassblock2 жыл бұрын

    Great instructions and straight to the point. Thank you!

  • @chrisc6874
    @chrisc687410 ай бұрын

    Thanks. Good info. I didn't even use a vise though. Works right on a table

  • @gitdog1000
    @gitdog10002 жыл бұрын

    Thanks! I follow your instructions and it worked perfectly. I didn't have a 9/16 wrench, so I used a 1/2 and it worked, too. Thanks again.

  • @EliminatorPerformance

    @EliminatorPerformance

    2 жыл бұрын

    Thanks for watching!

  • @essaytee7737
    @essaytee77372 жыл бұрын

    Trapped two bars with new chains in a tree. Thought they were pinched but I removed the saw (455 Rancher) and saw the brake ring compressed… so stuck on. I’m going to clean it all up and reattach to the bar still in the tree (mid plunge cut) to see if I can get it turning and get the bar and chain out! Thanks for the vid… will let you know how it goes!

  • @bryantjones8039
    @bryantjones80392 жыл бұрын

    Thanks for the great video. Today I did all the wrong things to my Husqvarna chainsaw. I finally have the break reset. Now I believe all I need is a new chain bar. It on but not as smooth as it should be. TY🎉

  • @bobppappap4687
    @bobppappap4687Ай бұрын

    Excellent video I knew it was something simple. Thanks for the video

  • @joedirtrulz8
    @joedirtrulz810 ай бұрын

    Thanks for the video. Couldn't keep the wrench from slipping so I just snugged it back again the brake and manually reset it. Got her together now

  • @nateman79
    @nateman79 Жыл бұрын

    THANK YOU! Three hours later, I finally got it fixed! New chain cuts like BUTTER. Instead of using a wrench, I was able to turn it with channel locks in case somebody doesn’t have a Vice handy

  • @jrcflaus
    @jrcflaus3 жыл бұрын

    best chain saw video I've seen. Going to try this in the next few days. thank you for posting.

  • @user-ys4ho1hj1t
    @user-ys4ho1hj1t7 ай бұрын

    That's a first class demo. Best I've seen for anything on KZread. Thanks.

  • @matthewmiller8965
    @matthewmiller89655 ай бұрын

    one of the more direct and well done fix it videos I've ever seen.

  • @stevem6711
    @stevem67113 жыл бұрын

    I had tripped the spring with the cover off accidently a few years ago and didn't know how to reset it. In order to use the saw I removed the spring and tossed it in my parts tray and forgot about it. After viewing this video, I dug up the spring out of the bin and reassembled. Works as it should now. Thanks!

  • @EliminatorPerformance

    @EliminatorPerformance

    3 жыл бұрын

    Thanks for watching!

  • @usernaame1000

    @usernaame1000

    3 жыл бұрын

    Doesn't that mean you no longer had a brake working?

  • @calvinbaldwin4202

    @calvinbaldwin4202

    2 жыл бұрын

    Thank you for this. Helped me out greatly.

  • @eltee9547
    @eltee95472 жыл бұрын

    Thank you for saving me the cost of replacing the cover on my Craftsman chainsaw. Now I know how the system works and should have my saw back in operation. Thanks for the clear and concise instructions. Cheers!!

  • @eltee9547

    @eltee9547

    2 жыл бұрын

    I followed your instructions and the cover went right on. Thanks again.

  • @timallemong5966
    @timallemong5966 Жыл бұрын

    This was awesome. Have never repaired a chainsaw. This was exactly my problem. Saved me from buying a new one. Much appreciated.

  • @EliminatorPerformance

    @EliminatorPerformance

    Жыл бұрын

    Thanks for watching, glad it helped!

  • @lulfukuslilfidde4107
    @lulfukuslilfidde41078 ай бұрын

    Yeah I’m the dumbass that left the brake locked and spent waisted time getting the cover off!!! And then waisted hours trying feebly to get it back on, all the while I could have walked 50 yards back to my camp and watched your video!!!! Now I’ll try to get the spring back in place after it went shooting into the woods , waistline more time 😖😖😖 Thanx and subscribed!

  • @cienfield1952
    @cienfield1952 Жыл бұрын

    Terrific. Exactly the issue I was dealing with. Thanks for helping me fix my Husqvarna.

  • @kimjungho1205
    @kimjungho12054 ай бұрын

    Thanks. You saved me a lot of time.

  • @rickysand1900
    @rickysand190010 ай бұрын

    This video just saved my arse! I tried everything to reset the brake, and then saw this video. Thank you!!

  • @daveolliemetalhead
    @daveolliemetalhead3 жыл бұрын

    Thank you for your video very helpful I bought a brand new chainsaw used it two times and the brake seized up doing what you said on the video

  • @yamarachin3793
    @yamarachin37939 ай бұрын

    I needed this, thank you for the nice and awesome explanation, now I try to fix mine.

  • @rideoutdoors5799
    @rideoutdoors57992 жыл бұрын

    This video is perfect for release brake !!!!!

  • @tueetake
    @tueetake3 жыл бұрын

    You are a lifesaver, this is exactly what I needed! I did some checking and cleaning on my saw but then got frustrated when the cover didn't fit anymore. This video explained it all! Thanks so much!

  • @EliminatorPerformance

    @EliminatorPerformance

    3 жыл бұрын

    Thanks for watching!

  • @garyhouston3134

    @garyhouston3134

    2 жыл бұрын

    Perfect

  • @bleulewchi7491

    @bleulewchi7491

    2 жыл бұрын

    @@EliminatorPerformance nice explain,,mine is not moving either.. Tomorrow I'm gonna do this step by step..Thanks for explaining the problem!!...

  • @ronaldschiavo6932

    @ronaldschiavo6932

    11 ай бұрын

    I have an echo cs 440 18inch chainsaw can't get new chain on it's a piece of junk worst saw I ever owned

  • @jhlasound
    @jhlasound10 ай бұрын

    This is a great video. Right to the point. All the facts no nonsense. Thank you for doing it right.

  • @jjaponick
    @jjaponick9 ай бұрын

    Thank you!! I'm newer to the chainsaw game and could not for the life of me figure out what was going on. Followed this video step for step and it works! I appreciate you!

  • @EliminatorPerformance

    @EliminatorPerformance

    9 ай бұрын

    Thanks for watching, glad it helped!

  • @M1Y4MUS4SH1
    @M1Y4MUS4SH12 жыл бұрын

    exactly what happen to me today...i noticed the problem at once but im noob on chainsaws machine (my father use it)..so i couldnt understand why its stucked..parts seemed not broken or missed something...i didnt find any broken part but it was very dirty..ur video will help me reinstall and clean it...thanks man..(i have an italian chainsaw but its almost the same)

  • @user-il5wk1hp2k
    @user-il5wk1hp2k5 ай бұрын

    Good video fully explaining the parts and system.Thanks a lot my friend.

  • @robertmatheson9542
    @robertmatheson95423 жыл бұрын

    AWWWW, I spent two hours trying to get the cover back on the saw and I failed. After I watched your video and it showed me about locking the spring back on the brake. it all made sense. Should have watched before starting . I expect successful reassembly. who would have known that I have to reset the spring to release tension on the brake spring. . Oh well lesson learned.

  • @stephenball7048
    @stephenball704811 ай бұрын

    Wish I had watched this before going to the repair shop!!!

  • @DXT61
    @DXT614 жыл бұрын

    That happens a lot to folks who force the cover off while the brake is on and they are stuck. That spring tension is stronger than it looks too, you cant just take a flat head screwdriver and pop it over. The wrench was a great idea.

  • @EliminatorPerformance

    @EliminatorPerformance

    4 жыл бұрын

    Thanks for watching!

  • @lancekikumoto1172
    @lancekikumoto1172 Жыл бұрын

    Excellent video 👍 well done,and we’ll explained. Mahalos 🤙🏾

  • @user-kp5yn3mc3g
    @user-kp5yn3mc3g9 ай бұрын

    Many thanks! Video was spot on with helpful tips and clear instructions.

  • @tcc4551
    @tcc45513 жыл бұрын

    Concise...keep this guy in your history.

  • @tsporttsman
    @tsporttsman3 жыл бұрын

    Refreshing to actually get useful help. This guy is great!

  • @christinelathigee4340
    @christinelathigee4340 Жыл бұрын

    I should have watched this video before I started getting mad, lol. Thanks for easy to follow video.

  • @EliminatorPerformance

    @EliminatorPerformance

    Жыл бұрын

    Thanks for watching!

  • @BuhlzI
    @BuhlzI Жыл бұрын

    Your brilliant! That was my exact problem. Mucho Gracious!

  • @AshleyNickerson-qf8qp
    @AshleyNickerson-qf8qp10 ай бұрын

    Thank you! Exactly what I needed to know

  • @charlesstokes6190
    @charlesstokes6190 Жыл бұрын

    My hero of the day! Thanks so much!?!

  • @rossnaheedy3400
    @rossnaheedy34003 жыл бұрын

    Thanks so much. I have a Tanaka, but your video explained the purpose and the mechanics of the brake band which helped me fix my issue.

  • @KilroyWuzhere-mv6hz
    @KilroyWuzhere-mv6hz Жыл бұрын

    Great video and exactly my issue and chainsaw. Thanks so much!

  • @EliminatorPerformance

    @EliminatorPerformance

    Жыл бұрын

    Glad to help

  • @larryharrissr.5642
    @larryharrissr.5642 Жыл бұрын

    Great demonstration, very thorough explanation

  • @wetdewlap8741
    @wetdewlap87412 жыл бұрын

    Omgod I can’t tell you how many videos I had to watch to get this answered!!!! Thank you sooo much!!!!!! Problem solved!!!!!

  • @EliminatorPerformance

    @EliminatorPerformance

    2 жыл бұрын

    Thanks for watching!

  • @lauriedavis800
    @lauriedavis800 Жыл бұрын

    Excellent , I like the way you edit out the screw removal and replacement, makes it neater.

  • @tyler3628
    @tyler36284 жыл бұрын

    Great video; straight to the point with clear instructions. You deserve 100x more subscribers.

  • @EliminatorPerformance

    @EliminatorPerformance

    4 жыл бұрын

    Thanks for the kind words Tyler, and thanks for watching!

  • @mkhulusizwedlamini7608
    @mkhulusizwedlamini76082 ай бұрын

    So much detailed information❤

  • @garyhouston3134
    @garyhouston31342 жыл бұрын

    Great presentation!!!!

  • @garyhynd3620
    @garyhynd36203 жыл бұрын

    Excellent video. I used your technique and it worked perfectly.

  • @EliminatorPerformance

    @EliminatorPerformance

    3 жыл бұрын

    Thanks for watching!

  • @juliuscorley5142
    @juliuscorley51423 жыл бұрын

    Outstanding video show me exactly help to reset chain brake

  • @darrenadams1555
    @darrenadams1555 Жыл бұрын

    Well done cheers saved me from throwing me saw in the river , very well explained I have never seen a brake like this and it is too simple once shown how cheers 👍👍👍😁🇦🇺🇦🇺

  • @user-tt2xe5ow9j
    @user-tt2xe5ow9j2 жыл бұрын

    as many other people here : thanks very much for this video !

  • @thomassartwelle2836
    @thomassartwelle283627 күн бұрын

    You a machine! Thankya for a good tutorial.

  • @shanedavison7473
    @shanedavison74733 ай бұрын

    I didn't have the cleaning machine si I sprayed the break with carborator cleaner over a sheet of cardboard to clean it and then I lubricated it with liquid wrench. I removed the break handle from the chainsaw and used the turning mechanism to turn the break and it worked.

  • @rebeccaschaen
    @rebeccaschaen4 ай бұрын

    Great video. Helped me out of a jam

  • @royebundy5430
    @royebundy54308 ай бұрын

    excellent, thanks for the information

  • @ProjectArms4719
    @ProjectArms47192 жыл бұрын

    Thanks. This video was helpful.

  • @dennisbosworth3665
    @dennisbosworth36655 ай бұрын

    Thank you Eliminator - you saved my bacon!

  • @tonyalways7174
    @tonyalways71742 жыл бұрын

    Fabulously clear explanation and punchy succinct video with no padding. Subscribing to see more. 👏🏻👏🏻👏🏻

  • @ClassicRollPlayer
    @ClassicRollPlayer Жыл бұрын

    Perfect! This was my problem... thanks so much!

  • @user-vy5no2xu5e
    @user-vy5no2xu5e Жыл бұрын

    Thank you very much solved my problem

  • @samhusson1596
    @samhusson15962 жыл бұрын

    Great video. Thanks heaps.

  • @user-eh6of5zl7t
    @user-eh6of5zl7t8 ай бұрын

    Great video, thanks.

  • @sm6jesse
    @sm6jesse Жыл бұрын

    Great video. Thanks

  • @roqueteroranger
    @roqueteroranger Жыл бұрын

    Thank you bro great job 😮👍👍👍👍👍🙏

  • @Bandits_68
    @Bandits_68 Жыл бұрын

    You're a legend. Thanks so much for a well explained, detailed video. You saved me $$ 😁

  • @pa53
    @pa532 жыл бұрын

    Just have to say thank you, the literal perfect video - thanks bro!

  • @KTMGUNNER
    @KTMGUNNER3 жыл бұрын

    Awesome, my saw seized up and I watched your video and I fixed it!! Perfect !! Thank you 😊

  • @EliminatorPerformance

    @EliminatorPerformance

    3 жыл бұрын

    Thanks for watching, glad it helped!

  • @romaldothomas8653
    @romaldothomas86532 жыл бұрын

    Thanks again great video.

  • @SmallTownBigWorld
    @SmallTownBigWorld3 жыл бұрын

    Thank you thank you thank you for being concise and doing a great walkthrough video!

  • @EliminatorPerformance

    @EliminatorPerformance

    3 жыл бұрын

    Thanks for watching!

  • @Crokuz
    @Crokuz8 ай бұрын

    Thanks, man. Really informative stuff.

  • @williamjackson2682
    @williamjackson26823 жыл бұрын

    need to try this to fix mine and save taken it to the shop Thanks.

  • @EliminatorPerformance

    @EliminatorPerformance

    3 жыл бұрын

    Like I said, they normally just get packed with gunk. Clean it out, lube it up, reset the spring and it should be good to go!

  • @johnneperez5408
    @johnneperez54082 жыл бұрын

    Thanks for being Awesome at what you do and sharing it.

  • @tpmbe
    @tpmbe3 жыл бұрын

    excellent video

  • @adkfuller8163
    @adkfuller81632 жыл бұрын

    Thanks for the help

  • @calvinbaldwin4202
    @calvinbaldwin42022 жыл бұрын

    Thank you for this it helped me out greatly

  • @MXRiderFiftyTwo
    @MXRiderFiftyTwo2 жыл бұрын

    A great easy to understand video.

  • @mikemanning2053
    @mikemanning20532 жыл бұрын

    Great video.