The new GA VSD+ compressor from Atlas Copco is manufactured on a lean production line. www.atlascopco.com/GAVSDplus
Жүктеу.....
Пікірлер: 25
@SGBITSUPERs7 жыл бұрын
Lean is making it more simple so there is no room for waste. This is an excellent video shows how they simplified the complexity.
@MrLPerona9 жыл бұрын
Excellent video, showing how to use kaizen
@ermalx.berisha21543 жыл бұрын
Atlas Copco, Home of Industrial Ideas!
@Topolopo12342 жыл бұрын
Such a motivational video for Lean Manufacturing
@AtlasCopcoCompressorTechnique
2 жыл бұрын
Glad you liked it
@marceloliberato81676 жыл бұрын
Amo fazer parte deste mundo tecnologico.em Fortaleza
@leanbusiness64877 жыл бұрын
A wonderful end to end look at Lean and Build for Manufacturability. It was funny for me to see the forklift moving in the background which is a Lean waste. However, you cannot remove all waste.
@ag-bk5wf
4 жыл бұрын
If your moving heavy items across a factory floor, its faster then a overhead crane.
@leanbusiness6487
4 жыл бұрын
@@ag-bk5wf Guiding a crane has components of navigation, guidance, and control. If guidance has a path and can accelerate fast the overall time may be faster or not. It might be worth it to do a simulation.
@shahrulnaim6935 жыл бұрын
Can you tell me the method of lean you use and the challenge you face to succeed for line ?..
@odair74665 жыл бұрын
Hi, I have a GA90 VSD compressor which has a faulty inversor, I've bought a new one, but it won't get recognized by the compressor, I don't know the communication settings to make it work by RS485. Is there any way to get these settings ?
@stauker.1960 Жыл бұрын
I can learn from this.
@AtlasCopcoCompressorTechnique
Жыл бұрын
We are delighted to know this.
@sewingfactory70532 жыл бұрын
I am also enjoyed this.thanks
@AtlasCopcoCompressorTechnique
2 жыл бұрын
Glad you enjoyed it
@Stop-Painting9 жыл бұрын
Hi! I enjoyed watching this video. How are your floor markings holding up?
@Jolderon7 ай бұрын
Is this Kevan Brighting??
@yigitbey27826 жыл бұрын
hocam nereden buldun bunu da sınavda soracaksın ya...
@fuater9543
6 жыл бұрын
konu ne? :))
@marshmower Жыл бұрын
Easier to get repetitive stress injuries. Because the person at the end of the line has to physically pick up the whole darned work piece. Too bad some items (like seats) can't be picked up by a robot without ripping the fabric.
@fadlimuttaqin46802 жыл бұрын
Subtitle Indonesia
@kuloping110 жыл бұрын
Safety First emblazoned on the back of everyone's shirts, yet many people, including the narrator is in the factory without safety glasses. Consider this to be a continuous improvement idea.
@09cheew1
6 жыл бұрын
why do they need safety glasses?
@kevenantoine35873 жыл бұрын
Nothing novel. Theyve been doing this at ford for some time
Пікірлер: 25
Lean is making it more simple so there is no room for waste. This is an excellent video shows how they simplified the complexity.
Excellent video, showing how to use kaizen
Atlas Copco, Home of Industrial Ideas!
Such a motivational video for Lean Manufacturing
@AtlasCopcoCompressorTechnique
2 жыл бұрын
Glad you liked it
Amo fazer parte deste mundo tecnologico.em Fortaleza
A wonderful end to end look at Lean and Build for Manufacturability. It was funny for me to see the forklift moving in the background which is a Lean waste. However, you cannot remove all waste.
@ag-bk5wf
4 жыл бұрын
If your moving heavy items across a factory floor, its faster then a overhead crane.
@leanbusiness6487
4 жыл бұрын
@@ag-bk5wf Guiding a crane has components of navigation, guidance, and control. If guidance has a path and can accelerate fast the overall time may be faster or not. It might be worth it to do a simulation.
Can you tell me the method of lean you use and the challenge you face to succeed for line ?..
Hi, I have a GA90 VSD compressor which has a faulty inversor, I've bought a new one, but it won't get recognized by the compressor, I don't know the communication settings to make it work by RS485. Is there any way to get these settings ?
I can learn from this.
@AtlasCopcoCompressorTechnique
Жыл бұрын
We are delighted to know this.
I am also enjoyed this.thanks
@AtlasCopcoCompressorTechnique
2 жыл бұрын
Glad you enjoyed it
Hi! I enjoyed watching this video. How are your floor markings holding up?
Is this Kevan Brighting??
hocam nereden buldun bunu da sınavda soracaksın ya...
@fuater9543
6 жыл бұрын
konu ne? :))
Easier to get repetitive stress injuries. Because the person at the end of the line has to physically pick up the whole darned work piece. Too bad some items (like seats) can't be picked up by a robot without ripping the fabric.
Subtitle Indonesia
Safety First emblazoned on the back of everyone's shirts, yet many people, including the narrator is in the factory without safety glasses. Consider this to be a continuous improvement idea.
@09cheew1
6 жыл бұрын
why do they need safety glasses?
Nothing novel. Theyve been doing this at ford for some time