Leaky Rusted Vintage Floor Jack Restoration (Snap-on)
Тәжірибелік нұсқаулар және стиль
Welcome to my restoration channel! This is a restoration video of a Snap-on Floor Jack (YA 700 2 1/2 Ton) I purchased this from a guy off of Facebook Marketplace for $120 USD. The person I bought it from said it had a slow leak. Let me know if you like this jack restoration!
THE RESTORATION PROCESS
After getting this jack into the shop, I dismantled it and began cleaning the parts. After tearing the jack apart, I sand blasted a lot of the parts and also used paint remover. The jack frame was too large to fit into our small sand blasting cabinet, so I used wire wheels and wire brushes to clean the metal before priming. The hydraulic cylinder was torn apart and rebuilt before priming or paint due to the way they are put together. It appeared to me that these jacks were painted after some or all assembly. I was able to replace the seals in the hydraulic unit as it appeared to have a leak. The u-cup was brittle and stuck in the cylinder below the nylon ring. The rebuild kit was purchased online as well as the new caster wheels and handle accessories. During the tear down, I accidentally broke the pin housing on the yoke. It was quite the process to repair due to being cast. We heated the part before welding, then we heated it after welding and placed in some sand/media to cool the part down slowly to prevent further cracking. I was able to get a steel tube from a local shop to fab the handle.
Overall I am happy how the jack restoration turned out. The jack works great as shown at the end of the restoration video. It is smooth and can be lowered with slow control which is what I want in a good floor jack. It is almost too pretty to use, but…we will be using it.
If you like what I do here, consider subscribing or leaving a like. It helps me out. If you have any questions, comments, or advice, please feel free to leave a comment in the section below the video. Thanks so much for the support. I appreciate your view.
Have a blessed day!
Kev
Follow me on Facebook
profile.php?...
Follow me on Instagram
/ rebuiltandrestored
Products used or similar in video:
Cold Bluing Solution. amzn.to/3JeNsAs
Craftsman Socket Set. amzn.to/3mFs3sv
Makita 18v Light. amzn.to/3laSKoz
Snap Ring Pliers. amzn.to/3DzHfMZ
Stanley Vise Grip (long Nose).amzn.to/3KkX91w
Irwin Vise Grip Channel lock Pliers. amzn.to/44Jgku1
Irwin Vise Grip Needle Nose Pliers. amzn.to/3DAfIv0
Jack Handle Pad. amzn.to/3KeDrV5
Camera and filming gear;
Main Camera. amzn.to/428GF3Y
Video Camera. amzn.to/3JD7J41
Main len. samzn.to/3JDIL4F
50mm Lensamzn.to/3mUZZBt
Check out some of my other videos:
Check out this Ingersoll Rand pneumatic impact Restore: • Restoration of a 1 Dol...
Check out this old Craftsman bench Grinder I Restored and custom new stand: • Awesome Restoration of...
Check out this Snap-On Ratchet Restoration…Mirror Finish: • Mirror Finish. Rusty S...
Check out this Vintage Toy Restoration: • 1940s Dump Truck Resto...
Disclaimer. Some links above are affiliate links. I make a small commission if links are used.
------------------------------------------------------------------------------
#restoration
#restore
#tool restoration
#vintage restoration
Пікірлер: 1 300
Thanks for checking out this Snap-on jack restoration! I bought this for $120 off of Fb Marketplace. With the jack, parts, paint, and jack oil, I have about $383 or so into this. Was it worth it? I really like the way it turned out. Let me know what you think! Thanks for watching. I do appreciate it! If you haven't seen my Ingersoll Rand 231 Model A restoration, here it is: kzread.info/dash/bejne/i4SYsKijiaS0mqg.html
@scissrface2182
10 ай бұрын
Youre not counting labor. Vintage snap on is around 700 maybe
@tunwellengineering733
10 ай бұрын
It was worth it for me, I enjoyed watching your great restoration
@RebuiltRestored
10 ай бұрын
@@tunwellengineering733 thanks! Glad you enjoyed
@RebuiltRestored
10 ай бұрын
@@scissrface2182 labor is cheap when doing it yourself! 😁
@Zooooom01
10 ай бұрын
How are you doing the stickers?
Beauty. Nicely done. Makes me smile how many of your tools are from Harbor Freight doing the work on this Snap-On jack.
@RebuiltRestored
2 ай бұрын
Thank you very much! I’m cheap but they work!
I had no idea that there were so many parts to that thing! Great job, I'm impressed.
@RebuiltRestored
10 ай бұрын
Thank you! It’s interesting how these things are put together and how they work! Takes a lot of moving parts!
@wop60
4 ай бұрын
Neither had I. Here Italy.
That is the first video over 15 mins long that I’ve watched at normal speed in two years. Excellent work.
@RebuiltRestored
Ай бұрын
Thank you very much! Appreciate that! Have a great day!
I bought the same jack from the dealer for $200 used. It lasted me 39 years before taking a shit. The hydraulic unit was called a "power unit" to the tune of 600 bucks! Went to the local rubber and gasket company and spent $56 for seals and made the nylon pump seal. Works like a charm.
@RebuiltRestored
10 ай бұрын
Awesome. Hopefully this one will live for another 39 years +. And that is quite pricey for a new unit! Thanks for the info! 👍
Awesome restoration! I'm a retired mechanic who now restores old farm tractors. There's something about restoring equipment. We live in a disposable society where its easier to throw away and buy new. The trouble is that probably 2/3s of folks would have thrown this jack away and got a new one. This jack is just as good as new and you got the satisfaction of restoring it. Great job!
@RebuiltRestored
10 ай бұрын
Very true! I appreciate the comment! We have some old tractors (8N) to redo at some point. Thanks for watching!
@royfrady8219
10 ай бұрын
I agree. I'm a packrat. I have an old Ford 860, 961, and 3 old ford F-100s to restore.
@Purqix
10 ай бұрын
It was already working so I would've bought it just for that honestly
@NaturallyaspiratedJJM
6 ай бұрын
Not to mentioned the quality of things has gotten even worse after 2020. Also amazing to see skilled people work.
@josephcooksley3219
3 ай бұрын
Yes some times a thankless task
You can smell the paint whilst watching. Great touch not ruining this extraordinarily good video with music, your work is the soundtrack.
@RebuiltRestored
9 ай бұрын
Thank you! Glad you enjoyed. 👍
His perfectly clean and organized tools alone make me want to watch more. And live in his workshop.
@RebuiltRestored
10 ай бұрын
Lol live there? 😂 thanks for the comment!
@davidzajano1983
6 ай бұрын
Um, live there? Not until he restores a mouse trap.
Absolutely the best floor jack restoration I have ever seen!...and I've seen a LOT of them! I've even done a few myself!
@RebuiltRestored
10 ай бұрын
Too kind but thank you! I appreciate it. Have a great day!
@anonanon4109
10 ай бұрын
You haven’t restored anything your lying. I know it.
@RebuiltRestored
10 ай бұрын
@@anonanon4109 lol
Your videos gave me the confidence to restore an old abused craftsman radial arm saw from the 80’s and an ancient bench vise that was very well used from a mechanic shop. Both turned out great and work flawlessly.
@RebuiltRestored
7 ай бұрын
Very very cool! Keep up the good work and have a great week!
I can honestly say, I don’t think I have ever started watching a restoration video. Thinking oh it’s just a….. and then just be more and more intrigued and engrossed as it went on, just a brilliant restoration, a great video, and a true set of knowledge and skill. Instant subscribe, cannot wait to watch more.
@DavidPlass
6 ай бұрын
Oh wow - there are SO many varieties on the Interweb. Tool restorations, toy restorations, furniture restorations, computer restorations, sneaker restorations, etc. etc. etc. You name it, there's a multitude of restoration videos for that thing.
As someone who is a mechanic and has several Snap-on tools as well as having a grandfather that’s a mechanic who has nothing but Snap-on tools, none of us have had a Snap-on jack, but I will say that jack looks beautiful
@RebuiltRestored
10 ай бұрын
Thanks for the comment! I am happy how it turned out. Thanks for watching 👍
This was the best rebuild video on a floor jack I've seen yet. Wow, that was amazing from start to finish. Beautiful work.
@RebuiltRestored
10 ай бұрын
Thank you very much! I appreciate that
@enermaxstephens1051
6 ай бұрын
@@RebuiltRestored What years was this jack produced?
Your attention to detail is incredible. I thought I was particular about things..... Excellent work and I appreciate you being true to The Word.
@RebuiltRestored
10 ай бұрын
Thank you very much! God bless! 👍
I have the same jack. It was shockingly expensive but it’s a workhorse and has never let me down, unless I turned the handle! Lol!! Your jack looks beautiful. Your professionalism showed when you welded the cast ear and you buried it in sand to control its cooling. Excellent job boss!
@RebuiltRestored
9 ай бұрын
Thank you very much! The welding was definitely a learning process. Thanks for the comment and for watching
Deeply jealous of your tool collection. Not to mention your patience and expertise. Thanks for sharing.
@RebuiltRestored
9 ай бұрын
Thank you very much!
Finally someone who knows which way to pull on an adjustable wrench.
@RebuiltRestored
7 ай бұрын
👍Thanks for watching!
I just rebuilt a YA700. Thank you for showing how it should look. Very helpful 👍
@RebuiltRestored
5 ай бұрын
Great! Glad to hear it! Thanks for the comment!
I have an old floor jack that I inherited when my dad passed. I would love to restore it to it’s original condition!
@RebuiltRestored
9 ай бұрын
That would be awesome! They aren’t terrible to rebuild! Let me know if you have any questions! Thanks for watching! 👍
This was excellent. You really went all out. Love the result.
@RebuiltRestored
10 ай бұрын
Thanks for watching! I appreciate it!
I'd bet this jack will be around 50 years longer than the Chinese jacks, and still working great. And then it could be rebuilt again! Beautiful job on this!!
@RebuiltRestored
10 ай бұрын
Hopefully it well! It may out last me!
nice to see Mr. Pittsburgh helping out his competition 😉
@RebuiltRestored
10 ай бұрын
Lol I have to use what I have 🤷♂️
This dude is stocked with harbor freight tools fixing a snap on jack. I freaking love it. I am a mechanic that fell into snap on and own way to many snap on tools. This goes to show you don't need that junk. It's an expensive name. Good job.
@Beenthere5409
10 ай бұрын
Great rebuild for sure. Probably can’t yet afford Snap On tools… but keep doing videos like this and you will soon be able to afford anything!!😊
@RebuiltRestored
10 ай бұрын
Thanks! It’s not that I don’t want nicer but the budget doesn’t always agree and these tools are doing the trick! lol
@Jiggaboojoness
9 ай бұрын
@@Beenthere5409I wish people would stop treating snap on like it’s a holy grail 🤣🤣🤣 you’ll learn eventually , I figure once you’re done paying for your tools 15 years from now . Idiot
Beautiful work. I'll add to the chorus by saying I too have never seen one of these floor jacks restored before. So many pieces & parts. The old workhorse definitely deserved this spa week. 🧡
@RebuiltRestored
3 ай бұрын
I’m definitely going to hang on to it now! 👍
You started with a well made hard worked piece of equipment and with a 2/12 ton of work (pun intended) brought it back to new . Well done !!
@RebuiltRestored
3 ай бұрын
Thank you very much!
As they say, better than new. I'm amazed at your knowledge of what the numerous plugs, washers etc are called. Obviously a mechanic? I loved the way you took so much care to protect the finish when reassembling. Please, restore that vice that is crying out for a bit of TLC.
@RebuiltRestored
10 ай бұрын
Thank you very much and yes the old vise was recently acquired. It works great but looks rough. Maybe a future project! 👍 thanks for the support! I appreciate the comment and the view!
Wow. Hand made with love on each piece. Probably better made than at the factory.
@RebuiltRestored
3 ай бұрын
Thanks much! I appreciate that!
Wow you are amazing for real I not only watched this twice you are a cure to my ADHD I thank you 🎉
@RebuiltRestored
3 ай бұрын
Awesome! Glad you enjoyed!
My guy has every whatchamacallit known to man 👌🏾
@RebuiltRestored
10 ай бұрын
Lol thanks 👍
Great Job!!! You are a gifted artist! Love watching things be restored!
This was an amazing video. I wish I could have taken this much care when I repaired jacks when I had my repair shop. I did repairs, you did a complete restoration.
@RebuiltRestored
3 ай бұрын
Thanks much! I appreciate it!
I lived in Kenosha and remember going on a tour of the Snap-On factory as a teen. The tools they made were top of the line, and respected by the men and women that made them. To own a Snap-On truck and sell their tools was a badge of 🎖 honor, back when America produced the best and people took pride in the work they did.
@RebuiltRestored
26 күн бұрын
Thanks for the comment! That would be neat to tour the factory! Blessings!
this makes me want to even more restore my grandfathers jack he got from sears back in the 70's not great but i have good memories using it
@RebuiltRestored
10 ай бұрын
You definitely should restore it! 👍👍
I also have the exact same jack, found mine in a scrap metal pile for $3. Did spend about $200 having a hydraulic machine shop rebuild the cylinder. One mod I had to do was remove the nubs that hold the saddle side supports to the jack body, drilled out to 1/2 inch and replaced with heavy duty bolts. Bought an oem handle brand new on ebay when I found one come up. Thing is an absolute beast, easily lifts my Hondas 2 feet off the ground without sweat. I feel one restored and painted like yours is easily worth a few thousand dollars, as they are true industrial grade and last a very long time. Thank you for the video.
@RebuiltRestored
10 ай бұрын
Very cool! Thanks for the comment! $3 is a much better deal! Great find👍👍👍
If everything was rebuilt that thoroughly and carefully, I would never spend the extra money on new. Great job!!
@RebuiltRestored
Ай бұрын
Thank you very much!
Very impressive that you knew how to take that thing apart bit by bit. Even the small pieces. That’s crazy. And remembering how it went back together. Or watching the video on how you took it apart lol. My favorite is the John 3:16 in the back ground. 👏👏🙌
@RebuiltRestored
3 ай бұрын
Thank you very much! Yes it is handy to be able to watch the film back if I forget lol Thanks for watching! I appreciate it! And the sign was a gift. Have a great week!
Wow! Fantastic job! A very enjoyable project to watch. Thanks for bringing us along.
@RebuiltRestored
10 ай бұрын
Thanks for watching! Glad you enjoyed! Have a great day 👍
I inherited a bunch of floor jacks and tons of tools I am tripping on all the time. This will be my next project after I finish my barn. Thanks.
@RebuiltRestored
9 ай бұрын
That will be cool! 👍 if you have any questions during the rebuild, feel free to reach out! 👍
One item there was a change to the oil reservoir when you put it on turn it off center of the oil release hole approximately 7 to 10 degrees. When you lower the jack, the oil will or can come out through the vent. I made this change back in approximately 1995 and applied at the factory on the new models. Well done ✅
@Beenthere5409
10 ай бұрын
Wow! That’s a really interesting comment. Did you work for the manufacturer then? These jacks are extremely impressive compared to the run of the mill today stuff.
@clarencewiles963
10 ай бұрын
@@Beenthere5409 not at the factory, but when doing warranty repairs at a store in Portsmouth, Virginia. We were a authorized repair shop. Thanks for your work, and well done 👍
@ricaneva3896
9 ай бұрын
i have 4 of the 642 models all different makes and i noticed the hole was not alingned i always wondere why nice story
Thanks for making this/these videos. As a person who has a helluva time getting to bed. These help me drift off. Much appreciated hauss.
@RebuiltRestored
7 ай бұрын
Awesome! Thanks for the comment and have a great week👍
Best one yet, bud!! Your killing it! Keep it up 👍
@RebuiltRestored
10 ай бұрын
Thanks boss! Appreciate it!👍👍
Tremendous! One of the best rebuilds on KZread. Keep em coming!
@RebuiltRestored
10 ай бұрын
Thanks boss! But tooo kind! Thanks for Watching!
@Beenthere5409
10 ай бұрын
I’m serious when I say this, you do a great job with your videos! Paying attention to details and all. The finished product is outstanding and I would bet not one like it anywhere in the world!
I was hypnotised for 42 min😅. Very good job. Well done! That jack has at least another 100 years of life left in it.
@RebuiltRestored
9 ай бұрын
Thank you very much! Hopefully it does! 👍
@gregrn779
6 ай бұрын
@@RebuiltRestoredagreed, but what’s with the mouse 🐭 crawling across your workbench. saw it and I was like, wait what???😳
Damn...don't think it looked that good brand new! Nice work.
@RebuiltRestored
26 күн бұрын
Thanks much! I appreciate it
Beautiful Job... Loved the video. No annoying music.
@RebuiltRestored
3 ай бұрын
Glad you enjoyed!
Really cool restoration! The red color itself has a beautiful tint! With white letters on it it looks even more cute!
@RebuiltRestored
10 ай бұрын
Thanks! I am happy with how it turned out. Thanks for watching and for the comment!
Well, using crafsman tools and accessories to restore SnapOn priceless😂 love it that you actually use the tools that you restore,they are not just for show,regards and best wishes from Scotland 🛠️🏴🇬🇧👍
@RebuiltRestored
10 ай бұрын
Thanks for watching and for the comment! Greetings from the USA Have a great day! 👍
Beautiful work
I bought this exact jack,on special, From Snap-On for $500 9 years ago and still works flawlessly! Great job and video! Well done
@RebuiltRestored
9 ай бұрын
Awesome! Thank you for the comment! Was it new?
@bobbycuesroadhouse2204
9 ай бұрын
@@RebuiltRestored yes, normally $1000 ! You got a great floor jack now!!
That was a LOT of work but the final outcome is awesome. Great job !!!
@RebuiltRestored
10 ай бұрын
It took some time! Thank you! I am happy with it.
I actually have one of those jacks. The best jack I ever bought
@RebuiltRestored
10 ай бұрын
Very cool! I like this one for sure!
I ENJOYED, every second.
@RebuiltRestored
6 ай бұрын
Thank you very much!
YOUR KNOWLEDGE IS UNBELIEVABLE A MASTER AT WORK , GOOD JOB 👏👏
@RebuiltRestored
8 ай бұрын
Thanks you very much!
I have my dads old craftsman from the 80's or earlier still and keep meaning to buy the rebuild kit. Thanks for the reminder and inspiration.
@RebuiltRestored
10 ай бұрын
Very cool! Hope your rebuild goes good! Thanks for the comment!
Professional work
@RebuiltRestored
7 ай бұрын
Thank you! Have a great week!
Only 6.6k likes and 434K views. Come on folks this is a living for YT people. Great job man!
@RebuiltRestored
9 ай бұрын
Lol thank you very much!
I personally use a hockey puck on all my jacks to protect my cars undercarriage when I jack them up. Great video!
@RebuiltRestored
10 ай бұрын
That’s a good idea! Thanks 👍
Amazing.... can you create new videos at least once a week? your restorations are perfect!
@RebuiltRestored
3 ай бұрын
Unfortunately I can’t get them done once a week. I am working on one now and hope to have it out ASAP! Thanks for the support!
looks so good, almost afraid to get it dirty
@RebuiltRestored
9 ай бұрын
Lol I know what you are saying 😂
Dude for some reason I found this video mesmerizing and I rarely use that term of wording when replying to a video on You Tube . I bet you have at least 50 hours or more into it WOW! GREAT JOB LOVE IT ! Years ago I had and old school Walker American made floor jack I ordered the seal kit but for some reason nothing went right with it I couldn't do the job and I chucked it and went to scrap I cant remember now what it was but something broke when trying to rebuild it . I kick myself in the ass now you cant buy American Made jacks like this anymore
@RebuiltRestored
8 ай бұрын
Thanks for the compliment! And probably all of us through stuff away that we should have kept. You will have to look for another used one. I was able to find this particular one on Facebook marketplace. Thanks for reaching out!
Just bought one at an estate sale for $30. Needs to be restored as well. Man I never realized how intricate these are!
@RebuiltRestored
Ай бұрын
They take some work but they are worth it! Good find and good luck on your restore! If you have questions don’t hesitate to reach out! Have a great week! 👍
Dude,this is a real and professional restoration,congrats,👍🏻
@RebuiltRestored
6 ай бұрын
Very kind. Thank you very much! Have a great weekend
Fantastic rebuild!!
@RebuiltRestored
10 ай бұрын
Thanks much! And thanks for watching 👍
You knows your ART........job well done.
@RebuiltRestored
9 ай бұрын
Thank you!
What a good watch, probably better than new.
@RebuiltRestored
3 ай бұрын
Thanks much!
Stunning restoration job. You can’t beat snap-on either. Looks amazing!
@RebuiltRestored
9 ай бұрын
Thanks much and yes, snap on is quality 👍
I tried doing this with an old Larin Jack, never worked the same after taking apart and re-assembled with rebuild kit.. I gave up and junked it. This is very cool.
@RebuiltRestored
3 ай бұрын
Man that’s too bad! Thanks for watching! 👍
Well-shot and well-edited.
@RebuiltRestored
7 ай бұрын
Thank you very much. I appreciate it.
Excellent job! I can tell you have experience welding castings from the little "tips" you gave. Well done!
@RebuiltRestored
10 ай бұрын
Thanks! That was a learning experience for us.
Finding all those little parts seems so daunting to me about a project like this. Very nice job!
@RebuiltRestored
10 ай бұрын
There are quite a few small pieces! And thank you!
Totally awesome job definitely worth the money
@RebuiltRestored
10 ай бұрын
Thanks for your feedback! 👍
Congratulations, it was perfect, much better than a new one.
@RebuiltRestored
8 ай бұрын
Thank you very much!
Those decals are excellent
@RebuiltRestored
8 ай бұрын
Thanks. They make it look nice
It was worth it. Fantastic job!😊
@RebuiltRestored
5 ай бұрын
Thank you very much! I appreciate that!
GOD Bless You, and Your family. Fixing that jack, was very good content.
@RebuiltRestored
Ай бұрын
Thank you so very much! God bless!
Excellent Detailed Video! 👏 👍 👌 Great Craftsmanship! This Restore Looks Better Than a Brand new Floor Jack! 🙂
@RebuiltRestored
Ай бұрын
Thank you so much!
@stealthnthunder
Ай бұрын
@@RebuiltRestored, You're Very Welcome 🙂
Perfect amazing work, your expertise is absolutly impressive, Thanks for sharing!
@RebuiltRestored
7 ай бұрын
Thanks for watching!
Better than a brand new one. Great job. 👍
@RebuiltRestored
10 ай бұрын
Thanks much! 👍
@danhancock4392
10 ай бұрын
I have one of these that I bought brand new off the Snap-On truck in ‘95 and i can tell you this one looks amazingly better, especially the grips on the handle. Still have that jack that I use regularly.
Nice touch👌
@RebuiltRestored
10 ай бұрын
Glad you like it!
wow, the thoroughness is what makes this really cool. down to every last nut and bolt
@RebuiltRestored
10 ай бұрын
Thanks much! I appreciate it 👍
That was magic. The work of a true craftsman
@RebuiltRestored
10 ай бұрын
Thank you very much!
Beautiful restoration! I noticed John 3:16! May God bless you and your family and your channel!
@RebuiltRestored
10 ай бұрын
Thank you very much. I appreciate that. God bless!
Nice work restoring this jack. You do very, very good work sir. I don't think you have reached "My Mechanic" level perfection yet but that is an extremely high bar that in time you have the skill and patience to achieve if your want to. You are the first "restoration" channel on YT I've seen so far that is even in the same league as "My Mechanic" so trust me, I mean this comment as a compliment so I hope you will take it that way.
@RebuiltRestored
7 ай бұрын
Thank you very much! My mechanics is the best. Have a great week! 👍
In this age of disposable everything, it's nice to see things restored for continued use. :)
@RebuiltRestored
Ай бұрын
Thanks much! I agree
Excellent job
@RebuiltRestored
10 ай бұрын
Thanks much!
Amazing work 😊
@RebuiltRestored
10 ай бұрын
Thank you!
Very nice restoration.
@RebuiltRestored
8 ай бұрын
Thank you! I appreciate that!
Love seeing the ingersoll in this video!
@RebuiltRestored
7 ай бұрын
Thanks. I try to use stuff I restored when I can. Thanks for watching!
Very high quality video! Thank you!
@RebuiltRestored
9 ай бұрын
Thank you very much! 👍
Omg. U make so happy. Thanks 4 alls u videos..GAD BLESS U EVER
@RebuiltRestored
5 ай бұрын
Thank you! God Bless
Nice job and a great little jack. You did a great job on the restoring of this tool. I'm sure you feel great and am proud of the job you did on this.
@RebuiltRestored
10 ай бұрын
Thanks for the comment and yes I am happy the way it turned out! Thanks for watching!
Definitely worth the rebuild. You got a bombproof jack for the price of a throwaway jack. I was going to toss my old floor jack rather than rebuild, and am glad I did not. One call to the customer line at HF convinced me: no support for parts. My fixed jack is working great..
@RebuiltRestored
9 ай бұрын
Thank you! Glad you were able to fix your jack! I appreciate the view 👍
Better than new ! Awsome video !!!
@RebuiltRestored
9 ай бұрын
Thank you very much!
This is outstanding. But on a side note, did anyone else notice the rat? 😂 I found it absolutely hilarious. Right at 21:59 🤣
@RebuiltRestored
8 ай бұрын
Thanks! Rat???? 😉
This was excellent. You really went all out. Love the result.. As always excellent restoration keep up the great work stay safe..
@RebuiltRestored
10 ай бұрын
Thanks for the feed back! Stay safe as well! 👍
You are son of a gun. Mechanic engineer that I have ever seen in f*** life. You are amazing, thumbs-up.
@RebuiltRestored
8 ай бұрын
Thank you and thanks for watching!!
As always excellent restoration keep up the great work stay safe.
@RebuiltRestored
10 ай бұрын
Thanks much! Stay safe as well. Thanks for watching and have a great weekend!
I bought that same jack new and paid $460 for it (many years ago) i bought it because the Walker jack only had lift height of 20" and Snap on jack was 25 1/2" jack still works great
@RebuiltRestored
9 ай бұрын
Very cool! Thanks for watching!
Brilliant job! I was shouting don’t forget the expansion plugs! I didn’t have to worry after all in the end.
@RebuiltRestored
10 ай бұрын
Lol thanks! Hope you didn’t yell too long! 👍
I would be very surprised if a jack of this quality couldn't handle more than its safe working load. Easy to see the quality and robustness of the parts as you cleaned them up.
@RebuiltRestored
10 ай бұрын
Yea you are probably correct! Thanks for the comment! 👍