Lead welding like you have never seen before. No acetylene. No compressed gases or oxygen.
Жүктеу.....
Пікірлер: 24
@jamesward5721 Жыл бұрын
I do the same - where it falls apart is on lap welds - with this torch, you won't get any heat into the lower layer & the weld will either be crap or look like a dogs backside. Butt welds are a doddle with any semi-decent/total garbage small flame torch. Where it will struggle (I.e fail) is on vertical welds/lap welds as you will have to dwell too long leading to holes. If you say different & can show, then I bow to your superior skillz.
@HydrOwelder5
Жыл бұрын
facebook.com/HydrOwelder
@SquirrelsForAll Жыл бұрын
Looks almost like a TIG weld. WOW!
@HydrOwelder5
Жыл бұрын
the weld is very similar but the process is unique
@blubbernek4477 Жыл бұрын
with kind off grip you use, and wich kind off gas you use sir?
@HydrOwelder5
Жыл бұрын
facebook.com/HydrOwelder
@Hyde999100 Жыл бұрын
Please tell me what is the equipment you are using! Thanks
@jonslab9635
Жыл бұрын
Water electrolysis torch
@HydrOwelder5
Жыл бұрын
@@jonslab9635 facebook.com/HydrOwelder
@simontaylor2335 Жыл бұрын
What torch is that
@HydrOwelder5
Жыл бұрын
It's a single tube
@danielmorgan197six Жыл бұрын
Where can I buy this set it looks great 👍🏻
@HydrOwelder5
Жыл бұрын
From me. I thought oh it, developed it, and put it togeather
@danielmorgan197six
Жыл бұрын
@@HydrOwelder5 it looks like you have so much control over weld do you sell the kit
@HydrOwelder5
Жыл бұрын
@@danielmorgan197six yes as a full starter kit
@danielmorgan197six
Жыл бұрын
Do you have an email adress or an online shop or something I can go to for more info 👍
@danielmorgan197six
Жыл бұрын
@@HydrOwelder5 ??
@dityokurniawan2261 Жыл бұрын
Tell me... How...😢😢 I need this..
@HydrOwelder5
Жыл бұрын
facebook.com/HydrOwelder
@SWC447 ай бұрын
TRY OXY AND HYDROGEN. IVE BEEN BURNING LEAD FOR 46 YEARS!!
Пікірлер: 24
I do the same - where it falls apart is on lap welds - with this torch, you won't get any heat into the lower layer & the weld will either be crap or look like a dogs backside. Butt welds are a doddle with any semi-decent/total garbage small flame torch. Where it will struggle (I.e fail) is on vertical welds/lap welds as you will have to dwell too long leading to holes. If you say different & can show, then I bow to your superior skillz.
@HydrOwelder5
Жыл бұрын
facebook.com/HydrOwelder
Looks almost like a TIG weld. WOW!
@HydrOwelder5
Жыл бұрын
the weld is very similar but the process is unique
with kind off grip you use, and wich kind off gas you use sir?
@HydrOwelder5
Жыл бұрын
facebook.com/HydrOwelder
Please tell me what is the equipment you are using! Thanks
@jonslab9635
Жыл бұрын
Water electrolysis torch
@HydrOwelder5
Жыл бұрын
@@jonslab9635 facebook.com/HydrOwelder
What torch is that
@HydrOwelder5
Жыл бұрын
It's a single tube
Where can I buy this set it looks great 👍🏻
@HydrOwelder5
Жыл бұрын
From me. I thought oh it, developed it, and put it togeather
@danielmorgan197six
Жыл бұрын
@@HydrOwelder5 it looks like you have so much control over weld do you sell the kit
@HydrOwelder5
Жыл бұрын
@@danielmorgan197six yes as a full starter kit
@danielmorgan197six
Жыл бұрын
Do you have an email adress or an online shop or something I can go to for more info 👍
@danielmorgan197six
Жыл бұрын
@@HydrOwelder5 ??
Tell me... How...😢😢 I need this..
@HydrOwelder5
Жыл бұрын
facebook.com/HydrOwelder
TRY OXY AND HYDROGEN. IVE BEEN BURNING LEAD FOR 46 YEARS!!