I honestly hadn’t thought about lead tape for years, but I was struggling to produce even a slight draw with my Cobra F9 Speedback driver (9 deg). Long story short, I settled on the most upright setting (10Draw), heavy weight forward and added 6 grams of weight towards the heel. This came after testing several different configurations. Result was really surprising. I’ve gained 15-20 yards distance. More importantly, I’m not worried about OB right anymore. Sad part is that I’ve played this driver for 4 years and have just now unlocked its potential for me. Low single digit handicapper old dog learning new tricks! Thank you!

@tlazur

2 ай бұрын

From what i've read, over time, a drivers face thins. This will add more distance and possibly make it illegal for tournament play. My callaway x460 is bound to be illegal and I can hit it just as far as my rogue or speedzone.

Great stuff! During the COVID lock-downs I started experimenting with my clubs. I once tried The Heavy Putter some years ago and loved it so I figured... hmmmm why not do something like that?. To give everyone a good laugh... I removed my putter grip, used some left-over rebar of small diameter I had kicking around and fit it inside the putter shaft. I epoxied it so that it doesn't rattle. My putter is now incredible!! People ask me to try it and can't believe the results! It's an old Ping putter (copper-beryllium I think) and love the look of it. Funny stuff but hey, I putt much better.

Another element is I've heard that many tour pros will put lead tape on the toes of their clubs to help induce a fade and prevent the quick closing of the face that leads to a hook. I think it was Justin Thomas that I heard talking about this.

Great video. I have lead tape on almost all of my clubs and it's great.

Excellent video, went to mid grips on all my clubs and with 3 strips or 6 grams of tape made a world of difference!! Great information AJ!!

@Leadtapeseller

9 ай бұрын

We are Amazon seller could you help test our lead tape?

@mikeoakley7470

2 ай бұрын

@@LeadtapesellerI would love to test it.

Thanks for this video! I saved it for future reference. This will definitely help me remember for the future when I want to tinker with my clubs some more. Thanks for the info before regarding lead tape and drivers. Regarding wedges, what would be the reasoning for adding lead tape? Does it raise ball flight? Does it lower ball flight? I feel like you did a video on a topic similar to this with Mr. short game, but I can’t remember the exact video offhand. Thanks for the great content and for helping us learn so much about dialing in our equipment.

Lead tape has hugely transformed the performance of my driver. With all the weights and expensive cartridges. It turns out that lead tape was what I needed. Few driving range session and few bit of lead tape. Incredible difference. I like my driver head to weigh around 204g. New drivers are often wayyyy too light and although I can swing them faster , I don’t feel where the head is at all.

@teegolf3672

Жыл бұрын

Where do you add lead tape on a putter?

@blartnosecrenshaw

Жыл бұрын

@@teegolf3672 Best to put it on the sole, spread across evenly. If you have a cavity-back (Anser type) you can out some in the cavity for a tiny bit more feel.

Excellent video! Highly informative. Thank you!

As always, great info A. J.

Very good video. Need to make second half of this into separate video. Weight on the shaft , under the grip and on putter really can change players dynamics. Do another video on that aspect. Will be very good.

My first use of lead tape was to balance wheels for my RC cars I raced. It was a game changer.

Awesome information! I simply use enough to feel the clubhead.

Great tips. Very interesting vid. Well done.

Loved the use of the old school putters!

Almost every putter I own has tape weight on it. I am reluctant to use it on irons and drivers until now as I feel I need to up my head weights across the board. Thanks AJ

Interesting stuff, I just started out on my new driver. My old driver was (although not explicitly advertised) way more draw biased, this one wants to fade a little more, but I am also doing some swing changes that have made me straighten my path but open the face to path for reasons yet unclear. put 4g on the heel, not seeing significant change yet after hitting 16 shots on the range, but the head feels heavier, which is not unpleasant. Luckily my launch monitor is not reporting any clubhead speed drop.

Great info -- Thanks AJ

Great video. Thanks for making it.

Great info AJ

My first hybrid, I was hooking like crazy when I first got it. Put some lead tape out by the toe, and voila! No more hooks! I have never taken it off.

This was really helpful, thank you sir

Great video! How do you get the lead tape to stay on the back of a driver. I put several 3g strips on top of each other then put black Gorilla tape on it and it still flies off after a round or two. These are 3G strips I purchased on Amazon, is the role you show in your video better?

Hey AJ, Noted lead tape location has negligible impact on COG location (for irons). It also has some impact on MOI properties, and this might effect how the individual swings the club. I'm not convinced that it doesn't matter where you put the tape on irons... I'm sure you have seen the Edel wedge system - the premise there is that moving weight around has a substantial impact. Interested to know your thoughts on this.

@EFGMC

2 жыл бұрын

Don't disagree with any of that. Many wedge designs have a moving cg that gets closer to the high toe side as loft goes up, but that requires moving a good bit of weight around in the head. At a certain weight, you no doubt will see a difference, but most people aren't going to be using enough tape for that to really happen. It's also difficult to pinpoint enough tape in one spot unless you use very small strips and build them up 10 deep or more.

I love this video this is awesome. I have a quick question if you don't mind. I am high handicap 20+ just strating to break high 90's. 1 or 2 lessons and some what self taught. I want to get fitted full bag. My question is should I do that or take more lessons first? I have not that my driver I bought 2 years ago was regular flex. But now I am swing at 96 MPH plus . I feel that maybe I'm not playing as well because my clubs are not for me. Second hand from my son. Again can I get fitted with what I k ow or should O get more lessons before hand? Thank you . I love your channel

@EFGMC

2 жыл бұрын

Really depends on what parts of your game are good and which need help. I think if you are consistent enough to break 100, a fitting can help. Don't know that you need an overly elaborate fitting, but a solid standard fitting looking at length, lie, loft, shaft weight, flex, grip size.

Very useful and informative vid. Use of lead tape is a game changer for us finicky golfers. One thing I don’t believe you alluded to when placing lead tape on a driver is if you place the lead tape on the back of the head toward the heel it will promote a draw and conversely if you place it on the toe it promotes a fade. I even place lead tape out toward the toe of my putter because my right hand tends to flip the putter head closed on I pull outs as a consequence. Lead tape on the toe of my putter prevents the flipping action and my putts go straighter.

Thanks for this video, saved it for future reference. Have you ever done a video regarding lead tape and wedges? I remember you did a video with Mr. short game, but I don’t remember the topic offhand. It may have had to do something with wedges. What would be the effect of adding lead tape two wedges? Does it lower ball flight raise ball flight? Thanks AJ, keep up all the good work and informational videos for us gearheads.

@EFGMC

2 жыл бұрын

The Mr. Shortgame colab was about using a different shaft setup to change ball flight characteristics. Wedges will be much the same as irons. You have a limited amount of space to add tape to and the wedge heads are very heavy so the change in weight is going to be quite small unless you add well over 10g of tape for instance. Just add the tape to the middle portion of the head for weight. If you want to change the trajectory, bend the loft.

Nice video, AJ. Quick question: I had regular shafts with medium size grips and 3 wraps and went to a jumbo grip with 1 wrap plus I added Arccos sensors to the butt end. What does this do the the weight of the irons? Should I have them rebalanced or counter-balanced? How does it affect my swing?

@EFGMC

2 жыл бұрын

So all the weight you are adding is on the butt end of the club so you are lightening the swing weight. Usually a jumbo grip will weigh more than midsize unless you are switching brands and construction type. Your swing weight will be lighter, but the static club weight will be heavier. This may or may not influence your swing. If you are having problems feeling where the club head is during your swing, you might want to try some lead tape on the head to see if that helps.

@roadtoscratchgolf3481

2 жыл бұрын

@@EFGMC thanks for the prompt reply. I certainly don’t need to lighten my swing. I already have a hard time feeling where the head is. I’ll try adding some tape to see if that makes a difference, and report back to you on my findings. Again, thanks.

I used lead tape on some graphite shafts that were too light. I found the balance point of the iron, and that’s where I put the lead tape. 👍🏼

@Daddyintheforest

Жыл бұрын

That would technically do nothing to the swing weight

@glenburr6755

Жыл бұрын

@@Daddyintheforest I wanted to keep the swing weight the same, just increase the club’s overall weight. 👍🏼

Great upload! How much lead tape should I add to my irons when counterbalancing a mid size grip over a standard size grip? Thanks.

@EFGMC

2 жыл бұрын

Depending on the grip you probably loose 3 SWPs going into midsize. 6g of tape will balance that back out. However I wouldn't just assume you need the same SW as you had before. Even though the scale will tell you the same SW as before, you've added about 20g to the static club weight. That's a significant amount. I would start with a couple grams of tape on the head and see how your consistency is, then keep adding or taking away tape until you find the best result.

I recently tried out an Evnroll putter with a gravity grip and though the grip was a potential game changer for me. However, I’m pretty nervous about going from a 50-60gram grip to a 105gram grip and the head feeling like it’s too light. Based on your video, it seems like a little bit of lead tape might not make up the difference. Any thoughts or direction on this?

@EFGMC

2 жыл бұрын

I would get some sort of 50g weight, maybe a bunch of washers stacked together, and just duct tape it onto the butt end of your current putter. Try it out and see how it feels.

i recently added lead tape to my wedges. i always hated my gap wedge. i got the weight just right and love the club now.

@matt7iron

Жыл бұрын

I hate my Gap Wedge too, where did ya put the tape and how long

@lcalvin5601

Жыл бұрын

@@matt7iron its been a while since i posted this. i dont love my gap wedge anymore haha. i put lead tape on the high toe. I basically did it to get a slightly heavier feel than my irons. I dont take many fullswing wedge shots

@matt7iron

Жыл бұрын

@@lcalvin5601 Ok thanks.

Yeah I used to put a little strip about 2" long on my Wilson's staff tour blade irons they were perfectly good and about a club longer. Any more ant they loud be too heavy. 2 strips on my Ping 1 and 2 irons..

Nice video. Loved the info about not mattering where the weight was placed as much as it is placed on the back of the irons, right?

Would it be a good idea to add weight in my driver where the weight is already attatched? I have an old Cobra ZL Encore that had three weight sizes but could never find the heavier one, Only 5 gr. differences, but curious how the extra would feel, and if spin is affected...?

@EFGMC

2 жыл бұрын

Just need to try it out and see. 5g isn't a ton of weight so it will mainly be a matter of how your swing reacts to it.

Hey AJ. I’m a new golfer looking to put together a bag. I’ve watched a few of your videos and was intrigued by the the maltby clubs that you mentioned. I am going to buy a used driver, 3 wood, 4/5 hybrid, and putter. After that I need irons and wedges. I’m considering buying Lazrus 6-Pw or Maltby 6-Pw. I can’t find many in depth reviews of maltby and was wondering if you could give me your opinion. Thanks AJ love the videos

@EFGMC

2 жыл бұрын

All the Maltby stuff I've used has been really solid. I would recommend them. I don't have any experience with Lazrus.

@allboutthemojo

3 ай бұрын

​@EFGMC can it be added to the hozzle of irons if you don't like the look of it on the head because some heads are just so stealthy looking? Same effect or totally different?

Good video good information. Am I understanding correctly that if I put lead tape on the butt end of a shaft ( 3 wood) I could lower the swing weight? How far down the shaft should I apply the tape?

@EFGMC

2 жыл бұрын

You would need to go under the grip if you want to actually drop the swing weight. The fulcrum of the SW scale is 14 inches, from the butt end of club so you would need the tape to be under the grip.

Now that was a great video there..i try lead tape but i hit the driver so hard it would not stay on there nomatter were i put the tape it comes flying off everytime i try...NOW i put a wrap under my grip that will take them long driver shafts that is like E weight down to D4 I LEARNED THAT FROM JACK WHAT HE DID UNDER THE GRIP it works GREAT

@EFGMC

2 жыл бұрын

Got this Jack trick in an upcoming video!

Good content..Carry on

Hi, I have previously putted well with a 35 inch counterbalanced odyssey v line tank. I'm not a great fan of the odyssey face and was wondering can I counterbalance a different putter. If so can you give some assistance as normal putter weights seem to be 350g to 380g while the cb ones are about 400g with 50g weight in handle

@EFGMC

2 жыл бұрын

I would start with a 30g CB weight with a standard head weight and see how that works. If not, you can always add more weight to the head and counterbalance off that new weight.

I have wrongly had 105g shafts put in my p770’s. They are far to light and I’m hoping to improve them whilst I wait for my new irons. I’m going to be adding tape to the heads temporarily but can’t get my head round the difference in effect on swing weight from shaft weight to head weight. Am I correct in thinking that 9g of shaft weight is equivalent to 2g of head weight as far as swing point goes? I’m hoping to get this set to feel something like it would with s300’s but that’s 25g. I’m so confused 🤣

@EFGMC

2 жыл бұрын

9g of shaft weight increase will add 1 swp. 2g added to head will = 1 swp as well.

I would have imagined if you put the tape vertical and not horzintal it might change the COG more for the irons.. also you can have a heavy shaft and it fill like air because the balance point is high.. and a light shaft that feels real heavy because the balance point is super low

Can you wrap lead tape around base of shaft just above driver adapter if so what influence would it have

@EFGMC

2 жыл бұрын

Yes, would just be adding weight. However you would need more weight to feel the difference in swing weight since the added weight is closer to the fulcrum vs adding to the head.

Great info. Where would I put lead tape on the Driver sole to reduce the height I get with my Drives? I am hitting 260 yds but the flight looks like it is a high Loop and the ball falls out of the sky around 250 and just bounces on a few yds. Sometimes it plugs and does not roll at all so obviously has a steep descent angle. I would prefer a lower flight parabola that give me a lot more roll out. Thanks.

@EFGMC

2 жыл бұрын

For that I would locate the tape right up near the face on the sole. Can be a little tricky with some head designs and swings so it doesn't get peeled off. I would also make sure you know where you are making contact on the face. Anything lower on the face is going to ramp up the spin, which it sounds like might be your issue. However it could also be too little spin if it starts out high and then just falls out of the sky. Really would recommend getting on a LM to see what the spin is doing. Otherwise you might make the problem worse instead of better.

@alanduncan9204

2 жыл бұрын

@@EFGMC Thanks. Like you said in the video if it does not work I can peel it off.

hello have a question about a g425 the head weight is 202 ,i would like to take it down to 198.right or wrong.getting a little older and need a little more head speed. thank you art

@EFGMC

Жыл бұрын

You can buy replacement weights in numerous hefts. Take the stock one out just and check what weight it is, then get the appropriate replacement.

I’ve added 4g to 5g of weight to he back of my 20 year old driver because I can’t hit the new large ones. It goes, far and straight. I outdrive my 20 year old son when I hit it flush. And when I don’t I’m only 10 to 15 yards behind him. (He crushes it every time) back in my high school days there weren’t adjustable clubs and I always used lead tape. Recently went back to using it on the driver like I said and also been adding to my wedges and a few others. Been a game changer. I wish I only went back to using it years ago

What about tungsten tape? I just used a lot of lead tape on one set of irons and was thinking about tungsten tape for the other set. Any drawbacks besides cost?

@EFGMC

Жыл бұрын

I think just the cost.

FYI, I put some lead tape on my Mizuno 921 Forged irons and when I peeled it off, most of the powder coating around the stability frame came off with it.

Great video! Adding weight to my driver head on the toe area has helped get the face a little more open at impact. I didn't think it would work but it seems to or I am using jedi mind tricks on myself. lol!

@EFGMC

2 жыл бұрын

Small weight changes can make a substantial difference in how you swing the club.

@thecringegolfer

2 жыл бұрын

@@EFGMC I am curious, is there a way to add weight that is more permanent? Say like I found a good combo and want to keep the toe weight. My lead tape tends to lose it's sticky and come off.

@EFGMC

2 жыл бұрын

@@thecringegolfer With a driver you can use Hotmelt to add weight to the inside of the head. It's not as precise as tape because the glue spreads out over a larger area but it still works. Bonus it gives you that nice thud sound.

@thecringegolfer

2 жыл бұрын

@@EFGMC I heard of hot melt but thought it was just for dampening sound and vibration but, duh me, add weight too. Lol! I guess I had a brain 💨

@EFGMC

2 жыл бұрын

@@thecringegolfer Primary for sound, but secondary is for weight and in your case would probably be the best option.

can i put the tape around the lowest point of the shaft on an iron? Reason being is because my 4,5,6 are different shafts comapred to 7,8,9,P and they're 10g lighter which bothers me

@michaeldiruocco

Жыл бұрын

never mind you answered my question at the end of the video. I guess back of the shaft is the best.

Awesome video !! Thoughts on adding lead tape below the grip of irons, woods, etc to increase swing speed? Is it a myth or a process that works, thx

@EFGMC

Жыл бұрын

Got a video upcoming where I cover this topic. Just trying to get the details ironed out.

@Mr.Steve-O

Жыл бұрын

@@EFGMC any updates? Looking forward to it

@EFGMC

Жыл бұрын

@@Mr.Steve-O Still on my list. I get side tracked with other topics when they fall in my lap. It is coming I promise.

👍👍👍

I put solder 6.4 g at heal it slowed my swing took it off get more distance off drives now

what about with hybrids, where would you put it on them? i get from this video lead tape can be used if your club does not have any adjustable weights in it.

@EFGMC

Жыл бұрын

Hybrids and fairway woods I usually put tape somewhere on the back where I can't see it at address. Most clubs have some area on the back that allows for this. You can also trim the tape to any shape and fit it where you want it.

What is the lightest heads made mens, ladies ,youth?

I have Ping i59, how would you recommend I tape them up, especially the longer irons?

@EFGMC

2 ай бұрын

In the cavity recessed part.

So does increased mass of clubhead positively impact distance with driver?

@EFGMC

2 жыл бұрын

Physics says yes, more mass with same acceleration = greater velocity. Heavier heads can transfer more energy but still requires equally solid contact and no significant swing speed loss. If you want to get really into the weeds with this stuff, check out Dave Tutelman's website!

It’s not going to make a huge difference, but adding weight to the CENTER of the back of an iron head is going to make it less forgiving. Think of it this way: the more weight you add to the center of a cavity back, the more you are turning your cavity back into a blade). For this reason, I add my lead tape around the perimeter of my iron heads (and try to keep it as evenly distributed as possible). This can be a little tricky, but it’s worth it to preserve forgiveness I think.

@EFGMC

2 жыл бұрын

You would need a lot of weight to change the playing characteristics of an iron head.

@dtlocke

2 жыл бұрын

@@EFGMC sure. But I add enough that it makes a difference. I play with “single length” irons, but I have the 9 through lob wedge all cut down 3 inches. (So im actually playing two length irons: one length for 4 - 8 and another for 9 - L.) When you cut off 3 inches from the shaft, you have to add so much lead tape that I think it does make a difference where you put it.

@EFGMC

2 жыл бұрын

@@dtlocke True, you are working with a much more extreme example.

I have a buddy who put lead tape around the tip of the shaft basically where the head and the shaft connect. The hosel I guess. I never understood what that did. Any ideas??

@EFGMC

8 ай бұрын

Just adds neutral weight to the head. Just like using a tip weight inside the shaft.

My goal is to keep same swing weight but flatter ball flight for shallower decent angle. I have the aerojet and it has the 12 gr weight in the back. If I put a 6 gram in there and add 6 grams tape to the bottom front will this achieve my goal? Or a variation of that.

@EFGMC

6 ай бұрын

It's possible but the best way to change trajectory is to change the loft or the impact location on the face.

@cryptoking8060

6 ай бұрын

@@EFGMC I have a 10.5 lofted down to 9 and like th trajectory somewhat but trying to at least take the spin numbers down. Will my suggestion reduce spin if not lower trajectory? Less weight back and move some forward?

@EFGMC

6 ай бұрын

@@cryptoking8060 Yes, more forward weight will drop some spin assuming you still make contact on the same spot on face.

I put lead tape on the back of my (chrome) 8802 to eliminate the sun's reflective shine.

@EFGMC

2 жыл бұрын

Never considered that use!

So what are you trying to influence with the weight, rotation or swing weight. Putting weight on the toe end of a putter must influence the toe hang.

@EFGMC

2 жыл бұрын

With the woods, both. Irons is really just weight unless you are adding an extreme amount. Putters you could change the toe hang with enough weight depending on the putter shape. Maybe I do a video where we look at changing toe hang and see what happens??

I recently added lead tape to my irons & it gave me great awareness of my clubhead. But it seems like after a week ive gotten used to the swing weight and ive lost my clubhead awareness. Do i just keep adding weight at what point do i stop?

@EFGMC

2 жыл бұрын

At some point, the club will just feel too heavy either at the beginning of the round or more likely at the end of the round. Once you hit that point I would start walking it back a remove a couple strips of tape.

@joseph_n

2 жыл бұрын

@@EFGMC ok thanks!!

If I don't like the 1 Length clubs can I re-shaft them to standard shafted length? Thanks

@EFGMC

2 ай бұрын

Will require a lot of modifications to make them play as traditional set.

Might not move cg placement, I wander what path and delivery changes it makes

@EFGMC

2 жыл бұрын

Can totally impact those things, however it's going to be golfer dependent. Each golfer "feels" weight differently in their swing so the same SW change could have opposite effect for two different golfers.

Look at John Daly's bag..😆

What would you do with a hybrid iron, would you treat it the same as a driver ?.

@EFGMC

3 ай бұрын

Yes, only issue is lead tape on the sole may rub off vs a driver.

@mick19421

3 ай бұрын

Thanks for reply, really enjoy your videos and find them interesting and helpful. Mick

Do you recommend a nicer brand of lead tape that won't make my new clubs look like it was patched up with duct tape?

@EFGMC

Ай бұрын

Only if it bothers you. Some people like the pre cut uniform pieces.

The one thing i've noticed over the years is that on the wedges I've played the COG has been closer to the heel than the center of the face. Not sure why it's been that way. Or maybe it's just me..

@EFGMC

2 жыл бұрын

Yes, most irons, especially blade styles seem to lean towards the heel side with the CG. With the higher lofted wedges (58, 60) over the last few years you see more brands build up that toe section to move the CG out and up that direction.

It would also have been good to add a bit of info on how to apply lead tape. clean the club surface with white spirt etc. warm the club and tape with a fan heater etc. once tape it on using a tea spoon of something firm and rounded press the tape all over and round off any corner. You tape with now never fall off.

Cool. So hosel weights aren’t going to start me hooking. I have a short set, PW 8 6 4. The PW IS C6 so I’ll add 15 grams to get to D1.5 The 8 is D0 so I’ll add 3 grams 6i is already D1.5 And the 4 is D0.5 so I’ll add 2.25 grams. Hopefully evening out at D2 after glue up.. and I can add tape from there. Pretty much trying to put together lighter softer shafted set while I recover from a back injury. This helped. Cheers!

@danyabsley

8 ай бұрын

I’ll add to get to this I put all 4 clubs with fixed grip and dry assembled on a scale Then hung a strip of 10mil lead tape over the hosel then once I achieve the desired swing weight o measured the length of the lead tape (1 inch = 1 gram) I will try get a scale to double check as 15 1/8 inch of tape = 15.125 grams however the PW is C6 trying to achieve a D1.5 dry. I feel like D2 is middle of the road to aim for.

@danyabsley

8 ай бұрын

😵‍💫

Where do you put lead tape on a hybrid to stop the hooking?

@EFGMC

Жыл бұрын

Far out on the toe.

Grip question if i may - i brought some 2nd hand Katana irons from Japan and the grips were knackered, so i went to change them, butt end of the graphite shafts are too big/wide to get any grips on, i did try to stretch the opening of the grip to slide it on but it ended in swearing! Any clues/tips/tricks to get the grips on? Sorry i didn't measure the end of the shaft (doh)

@EFGMC

2 жыл бұрын

Look for grips with the largest inside diameter. Not sure how thick these shafts are but you might try and look for the old Taylormade Bubble shaft grips. They are 30 years old now, but they were designed for extremely wide shaft butts.

@SteveSmith-zz4ih

2 жыл бұрын

@@EFGMC Cheers, i will be on a mission.

I put it on the sole of my hybrids and woods

🙏

Do you have Takomo clubs that I could try? I was told by Takomo that you did.

@EFGMC

Жыл бұрын

I have Takomo in my fitting studio. 101T, 201, 301CB, and 301MB.

hey.... 14:45 in, is that my driver??? lol. the tees slowly rips the tape off.

How do i stop it constantly falling off my driver head, it lasts about 2 rounds then falls off again?

@EFGMC

10 ай бұрын

Are you using tape or the little precut pieces. If you have a clean dry surface, it should stay on without issue. Make sure you really press and mold the tape to whatever contours you are covering.

non lead tape question: What brand shirt is that?

@EFGMC

2 жыл бұрын

Banana Republic I believe.

bravo ma prolisso

What about putting the lead tape on the front/back of the driver?

@EFGMC

9 ай бұрын

More towards the back will provide more stability but can increase spin. Forward will do the opposite.

@briangraham1725

9 ай бұрын

I’ve put it on the back of my driver and 3 wood. Will go to the driving range and play around with the position. Thank you for the advice.@@EFGMC

One inch of lead tape weighs ?

@EFGMC

Жыл бұрын

Less than 1g in most cases though not all lead tape is the same. My tape is about 1g for a 2 inch strip.

I just asked about this two days ago. Lol

@EFGMC

2 жыл бұрын

One of us is reading the others mind!

@snakesvt

2 жыл бұрын

@@EFGMC lol. I ended up just wrapping it low around the hosel works fine. I don’t care about the look so it’s ok

Is it legal?

Only saw where to stick it lol 😆

The issue in your review is that it doesn't take into account the dynamic effect of adding weight, how it affects the club head angle at impact of an actual swing: does it de loft, change the side angle at impact, gives more distance, etc.

@EFGMC

4 ай бұрын

Lead tape is primarily for feel and improving contact consistency. That's what I focus on. Keep it simple.

LEAD TAPE WHERE TO PUT ON DRIVER FOR LESS SPINNING BALL?

@EFGMC

Жыл бұрын

Low and forward aka right below the face.

Could you help me do a video for introducing our lead tape ?pay for it

@EFGMC

9 ай бұрын

Email me. adam@elitefitgolf.com

@Leadtapeseller

9 ай бұрын

@@EFGMC OK

@Leadtapeseller

7 ай бұрын

adam, have you recieve our leadtape? looking for a video@@EFGMC

How do i remove it?

@EFGMC

4 ай бұрын

Peel it off.

The problem with that is it’s a big pain to remove!!!

Ok question answered

1/16 inch. Such an American ! 2mm might be easier for me to understand.

I feel like people who think lead tape makes a difference are weirdos

@pictureperf

Жыл бұрын

well, i think the pros wouldn't do it if it had no affect. they would surely feel and know better than amateurs like you... and me😂

@TheBooze13

Жыл бұрын

@@pictureperf yea bud thanks proving my point. Also not many pros with lead tape on their clubs

you should wear latex gloves.

Might as well put led tape on your head covers, tees, shoes, and caps. Not gonna do a thing for your clubs!!

.......and poisonous. So clean your hands and remember, you cannot take it off or put more on during a competition round.

@EFGMC

2 жыл бұрын

Good points. Don't lick the lead tape!!

AGAIN... AGAIN... AGAIN... AGAIN.

Stick it on your elbow and wrap it around your wrist 🤭🤪🇺🇲

FYI, I put some lead tape on my Mizuno 921 Forged irons and when I peeled it off, most of the powder coating around the stability frame came off with it.