LCD Replacement from Ridstar
This is a follow-up to my Q20 RIP video in which my stock LCD display quit working. In this video, I walk you through the installation and P-codes of the new display. These P-codes are specific to the Ridstar-provided replacement display. At the very end of the video is a full listing of the P codes and their numbers. If you found this video useful, consider sharing, liking, and subscribing. Ride safe.
Пікірлер: 21
It's alive!!!!!
Ottimo video. Complimenti.
Just a question. On the P14 setting(max amps)why does ridstar limit you to 15amps(750w peak)? A 750w motor has a 20amp peak(1000w). My 500w motor peaks at 15amps(750w). Is there a current function(cur)on the display? Make sure it's hitting 20amps. I'd check to see if the controller is overriding that setting otherwise you're losing 25% power. Should be set to 20. Unless you're trying to save battery or something, otherwise it's now effectively a 500w motor. P15 low voltage cutoff, the controller is overriding the setting in the display. 41 volts is a bit conservative but it will defiantly save your battery especially if you take voltage sag into account.
Correct me if I’m wrong but isn’t the wheel a 4x20? Meaning setting the tire size to 23 is going to give you the wrong speed.
Would this be the same the
whats p07 do? ive seen the range for that setting from 0 to 255
what do you use to shine the frame and the fork?
awsome
Do you have a link for a replacement screen? Mines broken