You can get these microscopes here (affiliate): Andonstar AD407: bit.ly/3y1o3TI Mustool G1200: bit.ly/2UU69nD It is awesome to have one in the workshop. I buy most of my tools at Banggood: Banggood Summer Prime Sale 2021: bit.ly/2UhnPsV Deals for Tools & Electronics bit.ly/35HWNxg

@gemmaster9369

2 жыл бұрын

Thanks for the effort, this is a great video. But, I still could understand which one is better. And also would you please tell me which one is good for Jewellery business? It will be appreciated. Cheers.

@JTMakesIt

2 жыл бұрын

@@gemmaster9369 Andonstar would be much better for your application.

@andybee2784

2 жыл бұрын

@@JTMakesIt Thanks for the video! What about SMD electronics? Is there enough quality difference to support the 3x price difference? Thanks!

@JTMakesIt

2 жыл бұрын

@@andybee2784 Andonstar has more depth of field. You can have the whole SMD pin in focus. With Mustool you can't have everything in focus at once. You can use any of the two for SMD work, but Andonstar is much easier to work with, plus you can route the image on bigger external screen

@MiguelHernandez-zv8ne

Жыл бұрын

Hayear HY-1070 vs Andonstar AD407

I'm blown away in how the microscope has advanced. My stars, the little Nick knacks I could make. Wow.. You vid answered almost all my questions. Thanks for taking the time to put this together.

@JTMakesIt

Жыл бұрын

Thank you for watching!

Very good detailed comparison. Helps me a lot to make the right decision. Many Thanks, best health and peace.

Very insightful video. Thank you!

Thanks, nice comparison video.

I am interested in the Andonstar AD407 mainly to view coins that would be between 30-35mm in diameter with the minimum magnification would i see the entire coin or part of it .How Thank you

El Andonstar, es increíble la calidad Su precio barato. Yo lo tengo, y trabajo a las mil maravillas, lo recomiendo.

Отличное сравнение, не мог понять что не так с моим 1200, именно в пайке от отвратителен, ничего не видно когда смотришь на микросхему,

great comparison, you helped me a lot. Thank you! Does the ANDONSTAR AD407 support pc conection?

@JTMakesIt

2 жыл бұрын

Does not support usb connection, but it has HDMI output so you can put image on external screen and you have remote for interfacing which is awesome.

@ep_dimi

2 жыл бұрын

@@JTMakesIt thank you very much for the reply!! can you mount any barlow len like 0.5x?

@JTMakesIt

2 жыл бұрын

@@ep_dimi it has a standard lens thread at the end. You can screw something else there than the standard clear lens

One substantial difference in image quality is due to the extra led lighting, and that´s easy to solve. I have the cheap one, and I attached to it a shitty cheap selfie led ring. Man, that does a diference. It is night and day working on the boards, as the stock lighting is just crap. I also attached it to a cheap "magic arm" gripped to a shelve so you don´t shake the image when workin on the table, and that helped a lot too. The whole assembly is clumpsy and kinda crappy, but for that money I´m really happy. It sure gives a too warm color in the camera output to he computer and the recorded images, but it isn´t that bad. On the lcd the colors more accurate. I would´n spend more money in this kind of microscope. I would rather go for a pure USB one and use a nice big display to show the image (even cheaper than the cheap one if you have the computer/display next to the workbench), or go for an entry level binocular/trinocular. That last one would be for sure my next upgrade if I had the money to spare.

@JTMakesIt

2 жыл бұрын

Thanks for the input. Lightning is bad on the Mustool. The Andonstar also has an option to output the image through hdmi. I use it on my 42 inch TV.

@FOOKYOUTUBENUMBERS

Жыл бұрын

Same!! You can see the difference when He moves the Andonstar Led as its next to Mustool; I got mine on black Friday deal. I put a led ring light on it and it's works great

@andreamitchell4758

Жыл бұрын

@@JTMakesIt what about the AD208 vs the mustool? which one is better, price difference is $25 from the $100 andonstar also do you know of any good ones that have a stand but no screen that you can use an android device as a screen instead? I have a cheap Chinese endoscope and it ha san android app for your phone , limited to which phones it works with though but I see no reason they couldn't do something similar with these have cell phone mount or tablet mount and stand and better optics, most phones and tablets would provide a better screen , I feel like paying for the screen is a waste and the money could go to better optics or other parts instead or just bring he cost down, you could argue that developing an app would add cost but in the case of the endoscope I don't think it did since it was less than $5

Anyone can tell me the andostar resolution for the sensor (real, not the interpolated) and the screen resolution? Thanks.

Hello, excellent video!.... there is a cheaper alternative to the Andonstar model with similar characteristics? Thank you

@JTMakesIt

10 ай бұрын

You should check the link in the description. That store has a ton of different models

@rockyW46

10 ай бұрын

@@JTMakesIt Ok thanks I'll try if by chance you also have time to figure out a valid alternative can you let me know? Surely you are more experienced than me, Thank you so much .

Thanks for the share. can you please let me know if it´s possible to clean all information from the screen (icons, timer, etc) from the ANDONSTAR AD407 since i intend to use this on a art project and don´t need this information to show. ty.

@JTMakesIt

2 жыл бұрын

Hi, Sorry for late reply. You can remove clock, but I don't know if you can remove everything. I will need to test it. But you can always crop stuff out with video editing software.

@JTMakesIt

2 жыл бұрын

Hi, Today I was working with this microscope and I tested and I can confirm that all text information can be removed from the screen via settings.

Merci :)

what would you say is a bettery buy ad106s or the cheap 1200 in this video? mainly need it for job a qfp208 so real small legs and pads.

@JTMakesIt

Жыл бұрын

Both will do the job, the more expensive one will give you better images and you can hook it up on external monitor

@killerconsoles517

Жыл бұрын

@@JTMakesIt the ad106 is a smaller screen, there around the same price with the 1200 (seen many brands for it) being slightly more than the ad106s.

@killerconsoles517

Жыл бұрын

it the ad106s but not sure what difference the S makes.

seriously, you want to review a good product vs cheap one. LOOSE THE MUSIC !!!

where can i buy the chip to put on my cheaper one like u did :D

@JTMakesIt

2 жыл бұрын

What chip? :)

@jimsinnovations2737

2 жыл бұрын

@@JTMakesIt lol the one soldered on :D

@JTMakesIt

2 жыл бұрын

@@jimsinnovations2737 haha 😂 yes the chips are on shortage right now :)

@jimsinnovations2737

2 жыл бұрын

@@JTMakesIt haha

Когда уже в стоматологических микроскопах откажутся от окуляров? Смотреть в монитор удобнее. Особенно если ты носишь очки. Да и с монитором эргономичнее, ты не привязан к окулярам. Можешь отодвинутся или приблизится. Во многих микроскопах не меняется угол между окулярами и микроскопом, и ты вынужден голову наклонять вниз, а не смотреть прямо!

No way to correct the yellow tint with adjusting contrast or saturation settings? Worse case one could correct it with a filter post-processing the video.

@JTMakesIt

2 жыл бұрын

I agree. But I think the yellow tint only comes at certain magnifications and its only present at video recording. The image on the screen looks fine.

@naturfagstoff

Жыл бұрын

Yeah, but I found that whole yellow story strange, as the mustool has plenty of and very strong white/bluish leds. How could they possibly slant colors in yellow direction? Well, if you're wearing a yellow t-shirt, that reflect colors into the area, you will get color bleeding, especially if mustools ligths are dimmed down. No reason to think the image sensor is malfunctioning at one resolution, then starts working again at another. There is no lens either, that could bleed color.

G1200 vs Andonstar AD207 which one is better?? Need urgent experienced opinion

@JTMakesIt

4 ай бұрын

Andonstar

@partscience

4 ай бұрын

@@JTMakesIt in terms of resolution, magnification power and reliability and quality of image are you sure?? and yes in features obviously andonstar is clear winner...

@JTMakesIt

4 ай бұрын

@@partscienceI haven't personally tested the AD207, but it looks like a good machine. G1200 gas worse image quality in my opinion

Rate please

Tomlov DM602 ?

great video, is it worth it?

@JTMakesIt

Жыл бұрын

I use the Andonstar a lot and it still works great

what's the battery charging chip?

@JTMakesIt

Жыл бұрын

On my PCB? Check the video of this flashlight.

@userou-ig1ze

Жыл бұрын

@@JTMakesIt i did, still no answer..

@JTMakesIt

Жыл бұрын

@@userou-ig1ze what chip exactly are you interested about?

@userou-ig1ze

Жыл бұрын

@@JTMakesIt the lipo charging chip

@JTMakesIt

Жыл бұрын

@@userou-ig1ze its all here: www.instructables.com/How-I-Made-the-Most-Advanced-Flashlight-Ever/

vergleich birne mit apfel, aber trotzdem danke !

@deonstrydom9985

Жыл бұрын

Agreed

4:00 If a 120 cm wide screen was used, the magnification would be x1200. Screen resolution also affects the magnification. So wrong measurement.

@JTMakesIt

2 жыл бұрын

Agree, but I wanted to compare the magnification using the built-in screens on the microscopes so that it was a fair comparison.

@Seraslan

2 жыл бұрын

@@JTMakesIt I don't quite understand why they say it has magnified 1200 times. In my opinion, to see the true magnification, you need a screen with the angle of view and resolution of the eye.

@JTMakesIt

2 жыл бұрын

@@Seraslan i think this is some marketing thing. That is why you need to check review videos like mine, to see the true specifications

@Rodox2k10

2 жыл бұрын

@@Seraslan A far more sincere way to describe it would be _1200x magnification (for wide screen resolution)._

For the money i find andostar overpriced, the stand is poor and unstable i would want an industry heavy duty stand for that money. Also the sensor is upscaling is software its not a 4k sensor at all very misleading. I prefer the tomlov 7" for half the price but great image quality no lag even to hdmi out.

@marcoantoniootarolarojas2706

Жыл бұрын

I think 4 mega pixels is not enough for details. So, each person should choose according to the image quality that fits their work.

@alejandroperez5368

8 ай бұрын

What model and how much you paid for it? Tomlov DM9 ?

They are both cheap (:

These are digital enlargers. A microscope magnifies at a microscopic level hence the name not something that could be seen by a magnifying glass..

@kontoname

7 ай бұрын

There's no "microscopic level" other than the measurement itself. A microscope simply delivers an image of objects that are typically measured in microns. There are many traditional microscopes that have less magnification than these...

Night and day really but you get what you pay for I guess.

you bought damaged g1200. i have no the yellow color with g1200.

Cheap vs cheaper.

Bah-bapp-ba-babba-ba-bah. LOL

@LilyWhite-vo1bh

2 ай бұрын

ikr

Price

@JTMakesIt

2 жыл бұрын

Link in description

@jonnscott4858

Жыл бұрын

@@JTMakesIt not much point now as Sold Out :(

Andonstar is bad for the price and not worth buying. A couple of cheap 'mods' (better light and a arm) to the cheap scope make it much better and still cheaper.

@JTMakesIt

5 ай бұрын

In my case the Andonstar has a much better image quality which is worth the extra cost. But of course it depends on what you need the microscope for

Little better than none and what do you have in your brain

Andonstar is better

GET RID OF THE MUSIC!

@helmanfrow

Ай бұрын

Ha, yup. I had to watch this on mute.

Comparaison ridicule !

"cheap"?? this thing cost me $250

@JTMakesIt

Жыл бұрын

Musttool is cheap. Andonstar is expensive.

@obscenity

Жыл бұрын

@@JTMakesIt yeah I got the Musttool, rebranded as protech

i bought it g1200 , and used it for a month , and i regret it , the image quality is very bad , it never gives good balance between light and dark areas , the light is refleced directly to the camera when working with cicuit boards or electronics repairs , cannot see the parts clearly and the colors is not clear too , cannot tell if there is some thing dicolored or burned , and after a month or so of usage , it died , it doesnt turn on , i opened it and tested the board , i found the circuit board to be shorting on the power area next to the charger port , and its poor design seems to have failed in short time because it generates lots of heat while it doesnt have and proper cooling , its one of the worst microscopes in the market and no matter what price you pay for it , doesnt worth it never buy this model , you will end up throwing it in trash

@JTMakesIt

2 жыл бұрын

I agree. The Andonstar is a much better quality.