Those are just so beautiful! Thank you for sharing!

They are gorgeous x

So gorgeous!!!!❤

Beautiful!!

Gorgeous combo!!!!

@RJMPottery

3 ай бұрын

thanks

First time I hear this name of ink, beautiful

thank you lovely work

Colors so soft and beautiful

@RJMPottery

Жыл бұрын

thank you

❤❤❤ I have had similar results with Spectrum's Glacier, HF and AJ Question, food safe when layered on rim? Thank you 😊

Beautiful mugs. Cant wait to try this combo. Thanks for showing. Have you ever fired this combo at cone 5 with a 12 minute hold?

@RJMPottery

Жыл бұрын

Thanks and no, I have not fired anything at cone 5.

What do you mean by 6 minute hold please? Your work is beautiful!

Nice job cleaning up that foot.

Those mugs are beautiful!!💕 Which Dremel attachment did you use for smoothing?

@RJMPottery

Жыл бұрын

That is the dremel 85422 silicon carbide grinding stone.

@daniellesielschott2950

Жыл бұрын

@@RJMPottery thank you so much!! You guys do such nice work!!

@RJMPottery

Жыл бұрын

@@daniellesielschott2950 thank you

Could I put wax resist around the bottom of the mug, to stop the glazing dripping too far?

I’m curious how many of these mugs you are able to glaze with a single pint or jar of honey flux for example. With 3 coats inside and 3 outside…. Will you be able to do 10 mugs? More? I’m just trying to decide how much to order of the base glazes like honey or birch. Thanks!!

@RJMPottery

Жыл бұрын

I just did this combination today and I was able to do 9 mugs, 3 coats inside and 3 coats outside. I did a 10th mug but I needed one more coat to complete the inside, maybe it also depends on how thick you glaze and how big your mugs are.

What exactly does the hold at the end do? E.g if it is 5' or 10' minutes?

Gorgeous!!!! ❤❤❤❤❤ what cone do you fire to?

@RJMPottery

Жыл бұрын

cone 6 with 6 minutes hold

what brand is the ancient cooper?

I’m curious about the 12” Diamond Grinding disc. *Are you using this on the pottery wheel? *If so, are there holes on the bottom for the bat pins? *If no holes, how do you keep it attached? *What grit do you recommend? Where can I find one? Your bottom of the mugs looked as though there were still some sheen left! Thanks in Advance!!!

@genboomxer

10 ай бұрын

I have a similar setup in my studio. I bought an 8" disc from DiamondCore Tools and I had a spare 12" plastic bat handy. The disc comes with an adhesive backing. Attach the plastic bat to the wheel, draw an 8" circle on it for centering, then attach the disc to the bat. I chose the 8" because it works for what I make and the 12" is twice the price. Remember to always use water when grinding. Hope this helped.

@cynthiabicknase4378

9 ай бұрын

@@genboomxerwhat grit please?

@genboomxer

9 ай бұрын

@@cynthiabicknase4378 120 grit.

Where can I buy the grinder that is on the wheel? I love your glaze combinations

@RJMPottery

9 ай бұрын

it is from DiamondCore Tools and thanks for watching

What does it mean “with a 6 minute hold”?

If the mug wasn’t curvy would it have the same effect

@RJMPottery

Ай бұрын

Probably the same effect but got to be careful since it will run more.

Is that white color before the glaze undercoat? If so, what type? Thanks

@RJMPottery

10 ай бұрын

base coat is honey flux

@chrisasarah2673

10 ай бұрын

Okk, so the base coat is honey Flux, which seats directly on the clay right?

@RJMPottery

10 ай бұрын

@@chrisasarah2673 yes, I do 3 coats

@chrisasarah2673

10 ай бұрын

Thank you so much, so do you apply it on raw clay, or already burnt clay?... Sorry for over asking, wanna try it out first at home, then make it a business. Thank you.

@RJMPottery

10 ай бұрын

@@chrisasarah2673 I glaze my pottery after bisque firing at cone 04 then glaze fire them at cone 6

What kind of clay did you use?

@RJMPottery

8 ай бұрын

Number 3 Stoneware from Minnesota Clay

These Glazes all run. Not safe for electric Kiln