LATICRETE® HYDRO BAN® Linear Drain and Pre-Sloped Shower Pan

Тәжірибелік нұсқаулар және стиль

LATICRETE HYDRO BAN Linear Pre-Sloped Shower Pan is a component of the expanded LATICRETE HYDRO BAN line of products that allow for high quality rapid shower installations. Constructed of lightweight high-density expanded polystyrene, the LATICRETE HYDRO BAN Linear Pre-Sloped Shower Pan allows for the combination of LATICRETE HYDRO BAN Linear Drains and Pre-Sloped Shower Pans, the LATICRETE HYDRO BAN Linear Pre-Sloped Shower Pan is 100% waterproof, and ready-to-tile.
Learn more: laticrete.com/en/our-products...

Пікірлер: 28

  • @guyD0
    @guyD05 жыл бұрын

    The left part of the shower floor has a thicker foam than the right side due to the pitch. How would this work if you wanted to make this curbless? Do you offer pans that have a drain on the long side of the wall?

  • @laticrete

    @laticrete

    5 жыл бұрын

    We do make custom pre-formed pans to fit any need. That can be generated through your local LATICRETE Sales Rep. Here is a link to the Barrier Free Shower Assemblies manual. You may find a design in here that would suit your needs… cdn.laticrete.com/~/media/product-documents/installation-information/ds0125-barrier-free-installation-manual.ashx?vs=1&d=20161109T211802Z Here's another link that might be helpful: kzread.info/dash/bejne/fqWA265veb3Lj7g.html

  • @faris2272
    @faris22724 ай бұрын

    Does the drain have too be flush with the wall or can I have a inch of tile behind the drain

  • @laticrete

    @laticrete

    3 ай бұрын

    Hello! Thank you for your message. You can, but the pan would need to be modified in order to do this.

  • @TrevorSimko
    @TrevorSimko7 жыл бұрын

    I understand everything except the tile on drain at the end. How does that work?

  • @laticrete

    @laticrete

    7 жыл бұрын

    Hi Trevor - thanks for the question. Can you email us at socialmedia@laticrete.com - we have a PDF drawing that we'd like to email you that might help you regarding the drain installation. Thank you!

  • @Sugarshane88

    @Sugarshane88

    3 жыл бұрын

    @@laticrete could you also send me this pdf thanks so much

  • @ashwellhield874

    @ashwellhield874

    3 жыл бұрын

    @@laticrete hi I would also like to get this info in my email about tile covering the drain ashwellhield@gmail.com

  • @ashwellhield874

    @ashwellhield874

    3 жыл бұрын

    Me also I was trying to make sense of it also at the end

  • @ashwellhield874

    @ashwellhield874

    3 жыл бұрын

    @@laticrete hey I can sell this product hands down

  • @seandyson1677
    @seandyson16774 жыл бұрын

    Does hydroban work on aquapanel in the uk tried Mapei Aquadefence seems to peel off easy thanks

  • @laticrete

    @laticrete

    4 жыл бұрын

    It should, however we would consult with the board manufacturer and have them confirm roll on waterproofing are approved over it.

  • @christopherbonanno1120
    @christopherbonanno11205 жыл бұрын

    And how do you snake the drain when it clogs if it’s tiled over 🤦‍♂️

  • @laticrete

    @laticrete

    5 жыл бұрын

    Vince Black The tray would be removable on a tile in linear drain.

  • @aerobee58
    @aerobee588 жыл бұрын

    Do I flat trowel the drains underside with 4xlt or comb it? Also, should the inside corners be taped with thin set before the Hydro Ban?

  • @laticrete

    @laticrete

    8 жыл бұрын

    +SmokeyALCO Typically, the notch method under the flange is sufficient to support the flange as long as the flange is set properly on the mortar bed or substrate. Yes, the corners and board joints will require thin-set and alkali-resistant fiberglass mesh tape as directed by the board manufacturer’s instructions. Once the thin-set is dry then the installation of HYDRO BAN can commence.

  • @kylecirincione6691
    @kylecirincione6691 Жыл бұрын

    I would like to know why use 1/2 durock instead of you 1/2 hydroban shower board, I feel durock is a thing of the past. I like your hydroban system. im using it a lot now but I've preferred shluter line drains because of the application I also don't like foam pans they are cheap and will not pass a drop test

  • @laticrete

    @laticrete

    Жыл бұрын

    This video was actually created 8 years ago before we launched HYDRO BAN Board, so that is why it is showing Durock. So you are right HYDRO BAN wallboard is definitely the way to go!

  • @guyD0
    @guyD05 жыл бұрын

    Must i use a Laticrete drain or can i use a different?

  • @laticrete

    @laticrete

    5 жыл бұрын

    If the threads match up you could.

  • @fencerider1492
    @fencerider14928 жыл бұрын

    Do I have to use your company's mortar?

  • @laticrete

    @laticrete

    8 жыл бұрын

    Thanks for the question. We highly recommend a medium bed, polymer fortified mortar such as 4-XLT by LATICRETE in order to qualify for our LATICRETE system warranty. If you do not want to take advantage or our system warranty, another brand can be used. Here is the HYDRO BAN Linear Pre-Sloped Shower Pan data sheet for easy reference: laticrete.com/~/media/datasheets/lds0310.ashx

  • @fencerider1492

    @fencerider1492

    8 жыл бұрын

    +LATICRETE International, Inc. Understood, I was googling a distributor here in Tucson, but couldnt find one thats why I asked about another mortar.

  • @laticrete

    @laticrete

    8 жыл бұрын

    We have a distributor locator on our website that you can search using your zip code. We do however recommend calling them prior to ensure they have the exact product you are looking for in stock. You can find it here: laticrete.com/where-to-buy

  • @tileformiles
    @tileformiles8 жыл бұрын

    Can I use 255 Multimax mortar to set the tile?

  • @laticrete

    @laticrete

    8 жыл бұрын

    +tileformiles Yes, LATICRETE 255 MULTIMAX™ would be ideal for the installation of tile or stone over HYDRO BAN® Linear Pre-Sloped Shower Pan.

  • @howtodoitdude1662
    @howtodoitdude16622 жыл бұрын

    Bad tile layout.

Келесі