LATHE CHUCK MAGIC TRT#5
How to get optimum performance of a lathe chuck by properly loading the jaws before boring or grinding the gripping surfaces.
#practitioner_of_the_mechanical_arts
Paypal donation www.paypal.com/cgi-bin/webscr...
Support through Patreon / robrenz
Пікірлер: 419
Return of the King
@peteroleary9447
Жыл бұрын
The man with mental FEA. He sees tenths in colors.
I was already rewatching all of your and Toms old videos. And then there it is, a new video 😀 Thanks for doing such a thorough description on boring jaws, picked up some new hints from it.
@howardosborne8647
Жыл бұрын
That reminds me I have some catching up to do with the last 3 videos on your channel.
@StefanGotteswinter
Жыл бұрын
Oh! And thanks for the pipe chuck key - Made one years ago after you showed them first. And its so nice compared to a regular one.
@Watchyn_Yarwood
Жыл бұрын
So when can we expect a similar video from you?
@howardosborne8647
Жыл бұрын
@@Watchyn_Yarwood To be fair to Stefan he has posted quite a lot of regular video content onto KZread recently. I had failed to catch up with his last few because of being distracted with other matters.
@mftmachining
Жыл бұрын
Exactly the same here, Stefan. LOL🙂
Enjoyed! Great to see you pop up again. Do you sell that purple CBN? Willing to pay a little extra of course.
@mattdixon8750
Жыл бұрын
Great video Robin tons of info per usual, and sorry T.O.T. but if you have to ask... We'll you already know. Take care you two. Thanks!
@ryanshadders750
Жыл бұрын
We miss you too! Hope you had a great Thanksgiving
@Timothyh3nry
Жыл бұрын
You have to be careful of that purple stuff, degrades terribly during time travel. I have some pink CBN which can withstand temporal displacement much better. Happy to hook up a fellow traveler for the right price.
@st3althyone
Жыл бұрын
ToT has joined the chat. Glad to see you’re scurrying about in the gutters of the interwebs. 😂😂
@ROBRENZ
Жыл бұрын
Thanks watching Tony! ATB, robin
I sincerely appreciate your putting the effort into explaining the hows and whys of this process and all the other things you have contributed to making the rest of us that bit better a machinist than we every would have been without you. Thank you!
@ROBRENZ
Жыл бұрын
I appreciate that!
Man Robin, You never ceases to bring the goods with USEFUL information. Thank You.
I loved the last tip about making the 5C mounted chuck adjustable. Thanks so much for your time and effort producing these videos.
I really wish I could give a thumbs-up every time I learn something in Robin’s videos. This one would easily get 5, and I’m not even done watching!
I used to work with an older gentleman at my first job who was 84 yrs old. Started at age 14 in Germany, came to the US to find better work. Between you and Tom Lipton, I feel like I still get that kind of education that those 70yrs of experience used to teach me. Thank you for what you guys do for the rest of us. Can't find much experience like this anymore... especially not for free!
@ROBRENZ
Жыл бұрын
Glad you appreciate the content.
Nice to see you back at it Rob! Looking forward to more videos as you have the time! Thanks for posting and take care!
Excellent video Robin! It would be awesome if you would do a 101 video on cutting/soldering/grinding Carbide and CBN tooling. Materials, techniques, fluxes, solders, temps etc!
@ROBRENZ
Жыл бұрын
Great suggestion!
Enlightening as always, Robin. Thank you for always providing such concise and precise videos as are required in machining. Your content is second to none.
@ROBRENZ
Жыл бұрын
Many thanks!
Good to see you back Robin, and great content as usual. Very unique(and clever) way of trueing chuck jaws!
No cannot be true!! HE IS BACK WOW!!! THE BEST OF THE BEST IS BACK! THANK YOU!
Another master class, thank you.
@ROBRENZ
Жыл бұрын
Glad you enjoyed it!
Always pleased to see a new Robin video sharing his vast knowledge with those, "me", less fortunate mortals!
Another brilliant solution to a problem I’ll never have, as I’m not a machinist. These videos make you smarter no matter your vocation.
Our patience has been rewarded, welcome back to KZread Robin!
It's been a long time! Good to see you back! Definitely, this is the right way to true up chuck jaws! Absolutely! Hopefully Ox Tool will make a reappearance as well...... Thanks for another wonderful tip to make our tools perform like they were meant to! :)
@purerhodium
Жыл бұрын
Tom's etching press vs Robin's surface plate, which will outlive the Sun?
Another gem Sir. Thank you for continuing to support the community and share your endless amounts of brainpower! Happy holidays!
Yes. The legend is back. 🎉.
Gee its great to see you in the shop again Rob. I always look forward to your work. There is another way to load the jaws on a chuck for grinding or hard turning. Take 3 equally sized .5" (12mm) thick rectangular blocks of say 4140 although mild steel will work also, they all have to be the width you wish to space the jaws at. Then fit them between the outer ends of the chuck jaws a bit of a fiddle but not hard. Then tighten to the level you want. Lastly bore the blocks and the jaws together. No need to alter the jaws! I have done it and it works.
@carlhitchon1009
Жыл бұрын
Not sure you can be guaranteed equal pressure on the jaws that way.
@johnmcnamara3719
Жыл бұрын
Assuming the chuck was made to high accuracy, and most are, and the blocks are also made accurately to the desired width, it works fine. What we are really doing is forcing the outer edge jaw key against the back face of the slot in the body of the chuck and the inner edge of the jaw key towards the front face of slot in the body of the chuck. Thus taking up the looseness allowance made by the chuck manufacturer necessary for it to slide. also any wear in the key and slot that holds the jaws. It will work with any number of jaws above 2 Forcing them this way gives preference to the front gripping part of the jaws. This stops any lateral movement of the part while turning caused by gripping errors. Particularly useful with older slightly worn but still serviceable chucks.
As always, thank you for an excellent presentation of the nuances to any subject that you are covering. Not just, do this then that 'cause I said so. Very well done.
@ROBRENZ
Жыл бұрын
Much appreciated!
Fantastic as usual. I love your attention to detail and clear explanations of the forces involved. Hope it is not as long to the next video!
It was long dark night Sir, but you bring us sun.
I'm not a machinist of any sort, but I do have a background in Structural Engineering which means that I can understand your comment about everything being made of rubber. However your videos always fascinate me , for the way you consider, then explain the processes so simply and clearly. Thanks, and it's great to see new content
Great teaching from the Master Machinist! You class is my favorite. May the Lord bless you richly for the wealth of knowledge that you freely give!
@ROBRENZ
Жыл бұрын
Thanks, you too!
Like you, I too have SolidWorks and SolidWorks Simulation as well. It is fun and quite interesting to model things such as a chuck assembly and apply the loadings you describe to the assembly and then of course exaggerate the displacements grossly and visually see the distorted shapes of things. Things behave just as you indicate, you have a keen dye for how things distort. Will say there has been times I was surprised, they didn't take the shape I has anticipated. But then when you actually see the shape it will make sense. Excellent video indeed. Very well done, thank you.
@ROBRENZ
Жыл бұрын
Thank you!
I always enjoy seeing your videos. They inspire me to improve my accuracy. Loved the freebie at the end.
Welcome back Robin, we missed you.
Thanks Robin, As usual a gem that I will no doubt revisit.
Hello Robin! I'm glad to see you. You were gone for a very long time. Constantly visited your channel in the hope of seeing new videos. I am writing a message with the help of a translator, I do not know English, but your videos are clear to me without translation. Thank you.
This is a great topic most everyone can benefit from. Nice
When ever I want to see the right way to do things, this is the channel I come to!
I’ve struggled with this in the past. I couldn’t find/figure out a method to load the jaws. I made a ring but it wasn’t sufficient and my grinding rig was poor, especially the stone. I made everything worse. The ball bearing race is a great idea. And mentioning the accuracy of the scroll is huge. Ive banged my head off the wall before with a cheap 6 jaw chuck I use. I modified it to be a bolt thru design in order to use it like a set through by relieving the outside of the locating hub on the back plate a few thou to allow adjustment. All great info as always, Robin. I’m always learning something from you.
Nice one Robin! I had to have my faithful go to chuck face ground and OD ground and new jaws made because even though its a fairly high precision chuck, especially made it look like a washboard from many years of it being torqued to limit into workpieces.
Thank you Robin😁 Beautiful work . I love the detailed explanation. I have that same 6" Buck 6 jaw and I really like it.
He'll yeah 👍🏻 So happy to see this in my Feed Thanks Robin
Thank you for returning
Rob, another great episode full of useful and valid information! My C5 chuck is going to be modified just as you did! Thank you Rob!
New ROBRENZ video, don't blink.
Rob, GREAT to have you back ... REALLY ! Cheers.
Another point to add is using different pinions around the chuck will give a different result also. I agree most parting and vibration issues are chuck related. I use a strip of paper around the front of the job in a pinch. Bell mouthing also affects tool posts and tool vibration.
@ROBRENZ
Жыл бұрын
Yes, only use one pinion if it has more than one.
@bigbattenberg
Жыл бұрын
Just thought about the paper trick only hours ago. Gauge foil is an alternative. Will try that one tomorrow!
I haven’t even watched the vid yet. I just wanted to say that I missed your content. Glad to see you back sir
Hi Robin! Nice to see you upload again. It's always fascinating to get a glimpse into a mind that thinks in precision.
Very nice master class on lathe prep for accuracy! Very valuable information indeed! Most machinists on KZread need to study this.
Hey Robin, thank you for all your time and effort producing these video's. I do appreciate it and are very happy to see your back in the saddle making high quality content again. Much appreciated. 😁
You sound like a magician! “That’s why we have this other ring!” 😂😂😂😂 GREAT VIDEO ON YOUR TECHNIQUE THAT MAKE A LOT OF SENSE, as I’ve thought it should be but being an apprentice, I couldn’t figure it out how to load the internal faces for fixing them. Difference is that I’m dealing with a couple watchmaker lathe, one antique, and the other an used Sherline. I’m suspecting that the Chuck I have isn’t an used Sherline branded but an used import, hence the reason to repair the jaws, what your method came to shed some light on my endeavor. Now, off to find those damn ball bearings in the right size!!!! 😂😂😂 thank you very much for sharing your vast knowledge on an art that must be kept alive beyond pressing the buttons to run a program in a CNC machine but using real brain muscle instead!
Wow what n surprise. Awesome to get another video from You.
2:52 these few clips here were really well filmed. Thanks for the great close ups
@ROBRENZ
Жыл бұрын
Glad you enjoyed it
Your attention to detail is phenomenal, simply awesome. Thankyou Robin
Seeing that Shars indicator on this channel is fantastic! Go Shars!
Thank you for the highly detailed description of process and your reasoning. Always appreciate the density and tight editing you put into your videos. Every chuck we have for our Hardinges at work are badly worn to the point I don't consider using them for first ops, much less anything where I need repeatability. Very very frustrating, but I think now I know what I need to do.
Oh happy day! Welcome back Robin! Have missed your particular outlook on things very much. Another great video. Thank you!
Very interesting video. Welcome back!
Thanks Robin, glad to see you back.
You can't imagine how many dirty jokes I can get out of this.... lots of knowledge.
Good to see you back, thanks for sharing
So happy to see a new video from you. Always incredible content, thank you!
This is strange, just today I was going over your D-Bit Grinder videos as I just got one for myself. Now a new video. Well, I should have done this sooner.... Thanks for this one. Good to see you back.
There are many things you show in your videos that I have no chance of using in my very modest, tiny workshop. I love watching them anyway, because I always learn interesting and useful things. THIS video is different. Everything shown is extremely useful. I have used very similar method (hard-drilling the jaws for pins) to grind in my lathe chuck. Thank you for taking time to take us to your workshop.
So glad to see you back.
Brilliantly explained and executed, I do like the appreciation that all the metal is rubbery under tension loads to some degree, and to degrees that matter for accuracy and precision.
Nice to see you back Rob!!
Hey thanks Robin. Did mine today. All from this video. Came out great.
Thank you for this fascinating video and welcome back to KZread videos, you were missed!
Great to see you back, thank you for your time and knowledge.
This is the clearest explanation i have ever heard about this problem. Well done! Thank you. I would love to see a follow up video on your surface plate resurfacing project- how it is holding up and anything you would do differently and so on.
For me it's only a hobby and yet very instructive to see how "it can be done". Glad to see your video pop up on my notifications!
Great to see you again RobRenz! And thanks for this particularly - loaded with insight and information. You know initially I was thinking "got to have some diagrams here" to clarify the deforming moments and so on. But actually I found a great value in really thinking hard about the details, re-watching some segments of the vid, and gradually getting (pretty) clear what you were getting at. Thank you very much, and please come back soon !!! Best wishes for 2023 and onward.
Always stimulating and challenging. Thanks, Will
I am glad to see you return. I sincerely hope to see more.
Awesome tips Robin! I have a couple Buck Chucks I need to do this too for my HLV-H. Looking forward to making your solid tool post mount too. Please don't wait so long to share more awesome tips with us!
Nice to see you again. Great video.
Thank you Robin. Christmas Treat! Wonderfully thorough and clearly explained. Kind regards from John Spargo in CapeTown
Glad you are back!
Always an honor and a pleasure. Thank you.
Awesome content! I get what you are saying about scrutinizing your mounting processes through the filter of the origins of the loads on the work. I think I use a similar principle when engineering a structure or tool that needs to be welded. Noting the particular loads that metal structures or tools will be subjected to and the direction of their origins. Glad to see you back. Always digging your content.
Man I'm glad to see you back!
Great advice, as usual. Thanks for sharing Robin.
Thank you for an excellent and clear presentation, Robin! Whilst machining, we can tend to go into “auto pilot” mode and stop thinking about all the forces acting on the parts and the jaws. This really woke me up again! The part I found especially thought-provoking was the runout after the machining of the jaws being attributed to the accuracy of the scroll. Thank you once again! Keep up the great work!
Nice to see you back hope everything is good love your videos from Ireland you and Tom the best
Please never leave us out here that long in the dull,uninteresting KZread universe again Robin
Nice to see you again! And finally somebody doing it the right way. This is my hobby and I knew everybody was doing it wrong so I did it my way which is pretty much how your doing it and my chuck came out near perfect! It was .004” out when I got it and when I was done it was less than .0005”. I figured out how to do all the jaws on my 9” SB. I sold that lathe and moved up to a nice 12”X40” Clausing with adjustable jaw PB
Hey Robin, great to see you back my friend. As always, this is a great video to watch. Let’s have plenty more.
Getting closer to good ACCRATE turning....Thanks for taking the time for this Vlog..................Robbie
Thanks for sharing this. As a hobby machinist, you've brought to attention some things that I didn't even think of. It's time to grind my jaws.
So much information in a short video, Thank you for your generosity in teaching. Cheers
Nice to see you again!
I really appreciate your mental process and awareness of “systemic precision”.
welcome back.. as expected, excellent content
Nice to see you back with new video Rob. Thanks!
I now fully understand why Quinn coined the adjective "Renzettiness." Excellent work, Robin!
@ShainAndrews
Жыл бұрын
Who?
@carlhitchon1009
Жыл бұрын
@@ShainAndrews Get a clue Shain.
@ShainAndrews
Жыл бұрын
@@carlhitchon1009 Why don't you step up and try...
@Ddabig40mac
Жыл бұрын
@@ShainAndrews, Blondiehacks.
@ShainAndrews
Жыл бұрын
@@Ddabig40mac Gotcha. Not a fan of her work, and I was trying to think of a guy instead. Frankly I didn't know that was her name. LOL.
I see robin video, I click video, no questions asked. Thanks for making us all that bit better!
So much knowledge & experience, thanks for sharing 🙏
Tremendous content. Thanks Robin
@markkrick8602
Жыл бұрын
Is there anything you can share about another great YT creator who has recently and epically egressed. I miss his content and hope he and his are ok
Good Stuff!!! The "Freebie" with the 5c fixture plate with the chuck mounted on it, was a great tip. You saved the best until last.....!
Good to see another precision video coming from you. Thanks.
Your videos are great. Interesting and very informative. Thanks. Please keep them coming.
Always look forward to your videos ;) Thanks again
I've seen an alarming number of videos that show clamping down normally onto a spacer to grind the chuck faces. I always thought this didn't make sense to me. Your explanation was very simple and DID make sense to me. Thanks